The chromatography of a number of metals on cellulose phosphate layers in sulfuric acid and ammonium sulfate media

Summary The thin-layer chromatographic behavior of 58 metals on an intermediately acidic cation exchanger, cellulose phosphate (P-cellulose), has been surveyed systematically in sulfuric acid and ammonium sulfate media (0.01–2.0 M). The R_f values for many bivalent and univalent metal ions on P-cellulose plates increase with increasing concentration of sulfate ions. Howerver, manganese (II), arsenic (III) and selenium (IV) are not adsorbed on the cellulose to any great extent. Beryllium (II) and other metals, which form either strong phosphate complexes or insoluble sulfate precipitates, are strongly retained on the P-cellulose. The thin-layer chromatographic separations of various metal ions of analytical interest were accomplished to demonstrate the use of R_f measurements for predicting separations in the acid and the sulfate media.     

Chromatography of inorganic ions on polyethyleneimine cellulose layer in hydrochloric acid — Ammonium thiocyanate media

Summary Thin-layer chromatographic behavior of 58 inorganic ions on polyethyleneimine (PEI) cellulose has been systematically surveyed in hydrochloric acid — ammonium thiocyanate media. In this media most of the ions distribute chromatographically on the layer. Ag(I), Hg(II), Pd(II), Au(III), Bi(III), Ru(III), Pt(IV), Nb(V), Ta(V), Mo(VI), and W(VI) are strongly retained, while alkali earths(II), Mg(II), As(III), Ti(IV), and Te(VI) are not absorbed to any great extent in this system. An interesting correlation was found between the R_f values on PEI-cellulose in the thiocyanate media and the paramagnetic moment of the rare earths(III). An oddeven fluctuation against the atomic number is also found for the heavy rare earths(III). Chromatographic separation of many inorganic ions of analytical interest is demonstrated in this system.     

Thin-layer chromatography of inorganic ions on polyethyleneimine cellulose in sulfuric acid and acid-ammonium sulfate media

Summary The thin-layer chromatographic behavior of 49 inorganic ions on polyethyleneimine (PEI) cellulose, a weakly basic anion-exchanger, has been systematically studied in sulfuric acid and ammonium sulfate media (both 0.01–1.0 moldm⁻³). The sorption on the cellulose decreases with increasing concentration of the acid or sulfate for most of the ions and to a lesser extent for Hg(II), Bi(III), Th(IV), Nb(V), and U(VI). The R_f values of Pd(II), Ru(III), Au(III), Pt(IV), and Ta(V) are extremely low in both systems. Ba(II), Pb(II), Sb(III), Mo(VI), and W(VI) are also strongly retained on the layer. Oxy-anions such as As(III) and Se(VI) are not adsorbed on the cellulose to any great extent, but Re(VII) distributes on the plate with a R_f value of about 0.5. The characteristic retention on PEI-cellulose layer of several polyvalent ions, which form anionic sulfato complexes, can be observed in ammonium sulfate media. Possibilities for separations of analytical interest are also demonstrated in both systems.     

Separation of rhenium by thin-layer chromatography with polyethyleneimine cellulose in hydrochloric acid media

Summary The thin-layer chromatographic behavior of 49 inorganic ions on polyethyleneimine (PEI) cellulose has been investigated in hydrochloric acid media (0.01–1.0 mol dm⁻³). The sorption on the cellulose decreases with increasing acid concentration for most of the ions, but As(III), Ti(IV) and Te(VI) do not exhibit any R_f variation with the acid concentration. The R_f spectra of TI(I), Cd(II), Pb(II) and Zn(II) have a maximum. Ag(I), Bi(III), Nb(V), Ta(V), Mo(VI) and W(VI) are retained tightly on the layer, due to either insoluble salt formation or extensive hydrolysis. The extremely low R_f values of Hg(II), Pd(II), Au(III), Ru(III) and Pt(IV) are accounted for by stability of their chlorocomplexes. Re(VII) distributes chromatographically, having moderate R_f values between 0.3 and 0.6, so that the selective separation of Re(VII) from the other ions is feasible.     

Thin-Layer chromatography of inorganic ions on cellulose phosphate in sulfuric acid-organic solvent media

Summary Thin-layer chromatographic behavior of 49 inorganic ions on cellulose phosphate (P-cellulose) has systematically been surveyed with binary solvent mixtures consisting of sulfuric acid and an organic solvent such as methanol or acetone. The R_f values of many bivalent and monovalent ions as well as Te(VI) decrease on the P-cellulose layer with an increasing concentration of the organic solvent. Polyvalent ions which form strong phosphato-complexes and precipitate insoluble sulfate are strongly retained on P-cellulose. Oxy-anions, Au(III) and Pt(IV) are not adsorbed on the cellulose to any great extent. Feasibilities of the separation of multicomponent mixtures are demonstrated on the P-cellulose layer.     

Untersuchungen zur adsorptiven Anreicherung von Elementspuren an Adsorberharzen

Summary The adsorption behaviour of trace amounts of As(III), As(V), Fe(II), Hg(II), Pd(II), Pt(IV), Sb(V), Sn(II), Sn(IV) and Tl(III) from hydrochloric and hydrobromic acid solutions on Amberlite XAD-4 and XAD-7 resins by use of a chromatographic method was investigated. As expected, in certain acid concentrations, all of the elements are adsorbed partly or quantitatively. Furthermore, the adsorbability of 23 elements from sulphuric or hydrochloric acid solutions containing iodide or thiocyanate was examined. In accordance with analogous results for chloro- and bromocompounds it was found that the distribution behaviour of iodo- and thiocyanato-compounds is similar to that of corresponding solvent extraction systems. The adsorbed species of the trace compounds were estimated by comparison of the dependence of sorption rate on ligand concentration with the species distribution in the solution. The similarity of adsorbable and extractable species was discussed.

---

---

Teil II: Fresenius Z Anal Chem (1988) 331:588     

Cation-exchange chromatography of some metal ions using aqueous NH4SCN-organic solvent mixtures

Summary Systematic cation-exchange studies of 19 metal ions have been made in various concentrations of NH₄SCN in 4060 organic solvent-water mixtures. The exchange behaviour of the ions depends on the solvent employed. Most of the metal ions show decreasing distribution coefficients with increasing concentration of ammonium thiocyanate in the solvent. Based on the variation of distribution coefficients as a function of NH₄SCN concentration, separations could be predicted and subsequently column chromatographic separations involving Zn, Hg(II), Mg, Mn(II), Co(II), Ni(II), Cd(II), Ce(III), Fe(III), La and Th(IV) were achieved.     

Chelatbildende Austauscherharze,VII

Preparation and use of a resin with 1.8-dihydroxynaphthalene-O,O-diacetic acid as chelating group are described. Besides the separation of many of the common interfering ions it also permits the separation of Hf. The following ions could be separated quantitatively: Mg(II), Pb(II), Cu(II), Fe(III), La(III), Ce(IV), Th(IV), Ti(IV), and U(VI). During these and further qualitative and quantitative experiments no interfering ions could be found. A method for the separation of⁹⁵Zr from its daughter nuclide⁹⁵Nb is also described. The main problem proved to be the separation of Zr(IV) and Hf(IV), owing to their close resemblance. To accomplish quantitative determination of Zr and Hf without any separation,⁹⁵Zr and^175+181Hf radioisotopes were used. The chelating resin permits the separation of 95% of Hf(IV) from an equimolar solution. The main part of Hf(IV) is eluated by 2M hydrochloric acid, and subsequently Zr(IV) by 0.75M oxalic acid. The rest of Hf is enriched in the first fractions of the oxalic acid eluate, so that when eliminating these, even after a single step experiment hafnium free from zirconium and a rather pure fraction of zirconium are obtained. Even under extreme conditions of concentration (Zr∶Hf=91∶1) 75% of Hf can be separated free from Zr in a single step experiment.

---

---

Vorgetragen auf der IUPAC-Tagung in Prag, 1967.     

Extraction of actinides by quaternary amines from hydrochloric acid medium

The extraction of Np(IV), Pu(IV) and U(VI) from aqueous hydrochloric acid into quaternary amines has been studied. The dependence of the distribution coefficient on amine concentration suggests that the actinide ions extracted are NpCl ₆ ²⁻ PuCl ₆ ²⁻ and UO₂Cl ₄ ²⁻ . This is further supported by the absorption spectra of the amine extracts of these actinide ions. Based on the extraction data obtained, a simple method for the separation of typical metal ions such as Cs, lanthanides and Zr from U(VI) and Pu(IV) is suggested.     

Liquid — Liquid extraction of silver(I) by diphenyl-2-pyridylmethane in benzene from aqueous mineral acid — Thiocyanate solutions

Liquid — liquid extraction of Ag(I) by diphenyl-2-pyridylmethane (DPPM) in benzene from aqueous nitric and sulfuric acid solutions containing thiocyanate ions has been studied at ambient temperature (24±2 °C). The metal is extracted quantitatively from 0.01M HNO₃+0.02M KSCN; or 0.25M H₂SO₄+0.02M KSCN by 0.1M DPPM (optimum extraction conditions). Slope analysis indicates that two types of ion-pair complexes i.e. [(DPPMH)⁺·Ag(SCN) ₂ ^– ] and [(DPPMH) ₂ ⁺ ·Ag(SCN) ₃ ^2– ] are involved in the extraction process. Separation factors determined at optimum conditions reveal the separation of Ag(I) from Cs(I), Br(I), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Fe(III), Au(III) (from HNO₃ solution only), Cr(III), Hf(IV), Ta(V), Sn(IV) and Cr(VI). With the exception of thiosulfate, other complexing anions like ascorbate, acetate, citrate, oxalate do not hinder the extraction of Ag(I) under optimum conditions.     

Cathodic stripping voltammetric determination of selenium(IV) at a thin-film mercury electrode in a thiocyanate-containing electrolyte

The well-known method for the determination of selenium(IV), which is based on the cathodic stripping voltammetry of copper(I) selenide, has been adapted for application at the thin-film mercury electrode on glassy carbon (TFME). Insufficient reproducibility and sensitivity have been overcome by using a 0.1 mol/L HClO₄ electrolyte solution containing 0.02 mol/L thiocyanate ions. Thiocyanate ions have been found to increase the peak height of the selenium response and shift it to more positive potentials. This behaviour is explained by an adsorption of SCN^– at the interface glassy carbon/Cu₂Se and its action as an electron transfer catalyst between glassy carbon and copper(I) selenide. A 3σ-detection limit of 75 ng/L Se^(IV) has been achieved. The relative standard deviation is 5.2% at 5 μg/L selenium(IV). The influence of cadmium(II), arsenic(III), zinc(II), iron(III) and lead(II) ions on the selenium response has been studied. In case of lead ions, a new signal occurred at more negative potentials than the reduction of Cu₂Se. This signal, which is probably due to the reduction of PbSe, can also be used for the determination of selenium(IV). Received: 13 November 1996 / Revised: 19 December 1996 / Accepted: 24 December 1996     

Evaluation of unsymmetrical dithiodiglycolamide as novel extractant for application in selective separation of palladium(II) from aqueous solutions

A novel unsymmetrical multidentate ligand namely; N,N'-dimetyl-N,N'-didecyldithiodiglycolamide (DMD³TDGA) was synthesized and used as agent for the selective extraction of palladium(II) from hydrochloric acid solutions. A systematic investigation was carried out on the extraction of Pd(II) using DMD³TDGA. The quantitative extraction of Pd(II) with DMD³TDGA in n-dodecane is observed at ~4 M HCl. The main extracted species of Pd(II) is PdC_l2. DMD³TDGA and IR spectra of the extracted species were investigated. The extraction of palladium(II) from various concentrations of hydrochloric acid solutions in the presence of metal ions, such as Pt(IV), Rh(III), Cr(II), Ni(II), Fe(III), Nd(III), Zr(II), and Mn(II) was carried. DMD³TDGA showed very high selectivity and extractability for Pd(II). Quantitative back extraction of Pd(II) was obtained in single contact using thiourea solution. The results obtained indicated that, excellent separation of Pd(II) from the investigated metal ions can be achieved. Five successive cycles of extraction/back-extraction, indicating excellent stability and re-utilization of this new extractant can be used for selective separation of Pd(II) from other elements in hydrochloric acid medium.     

Separation of Mercury with an Ammonium Sulfate‐Ammonium Thiocyanate‐Ethyl Violet Flotation System

The separation behavior of mercury by a flotation system consisting of ammonium sulfate, ammonium thiocyanate and ethyl violet, and the conditions for the separation of Hg(II) with other common metal ions have been studied. The studies show that in aqueous solutions, Hg(II) combines with NH₄SCN and ethyl violet(EV) into dissoluble ternary ion‐association complex [Hg(SCN)4^2?]?(EV)₂. In the presence of ammonium sulfate, the precipitate is floats well on the surface of the water phase and separates from water thoroughly. It shows that Hg(II) can be separated completely from Cd(II), Fe(II), Co(II), Ni(II), Mn(II) and Al(III) by flotation at pH1.0. The flotation mechanism of Hg(II) is described in this paper.     

Kinetic study of the Ce(III)‐, Mn(II)‐, or ferroin‐catalyzed Belousov‐Zhabotinsky reaction with pyruvic acid

The Ce(III)‐, Mn(II)‐, or ferroin (Fe(phen)₃²⁺)‐catalyzed reaction of bromate ion and pyruvic acid (PA) or its dimer exhibits oscillatory behavior. Both the open‐chain dimer (parapyruvic acid, γ‐methyl‐γ‐hydroxyl‐α‐keto‐glutaric acid, DPA1) and the cyclic‐form dimer (α‐keto‐γ‐valerolactone‐γ‐carboxylic acid, DPA2) show more sustained oscillations than PA monomer. Ferroin behaves differently from Ce(III) or Mn(II) ion in catalyzing these oscillating systems. The kinetics of reactions of PA, 3‐brompyruvic acid (BrPA), DPA1, or DPA2 with Ce(IV), Mn(III), Fe(phen)₃³⁺ ion were investigated. The order of relative reactivity of pyruvic acids toward reaction with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion is DPA2 > DPA1 > BrPA > PA and that of metal ions toward reaction with pyruvic acids is Mn(III) > Ce(IV) > Fe(phen)₃³⁺. The rates of bromination reactions of pyruvic acids are independent of the concentration of bromine and the order of reactivity toward bromination is (DPA1, DPA2) > BrPA > PA. Experimental results are rationalized. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 408–418, 2000     

Influence de la cinétique des réactions chimiques sur les courbes de polarisation : Application à l'étude des complexes thiocyanés du titane(iv) et du titane(III)

The electrochemical oxidation-reduction of the system titanium(IV) — titanium(III) is slow at dropping mercury electrode in perchloric acid or hydrochloric acid, but becomes rapid in the presence of thiocyanate ions.On the basis of polarization curves, interpreted according to a preliminary theoretical study, the authors conclude that the rapid electrochemical reaction is the following: TiOH.SCN⁺² + H⁺ + e ? TiSCN⁺² + H₂OAn application of the findings to the polarographic determination of titanium is given.     

The quantitative separation of calcium from magnesium,aluminium and other elements by cation-exchange chromatography in ethanol-hydrochloric acid

Magnesium can be separated from calcium by elution with 3.0 M hydrochloric acid containing 60% ethanol from a column of AG₅₀W-X8 cation-exchange resin. Calcium is retained and can be eluted with 3.0 M hydrochloric acid or 2.0 M nitric acid. The separation factor of (α_Mg^ca=5.6 is considerably higher than that in aqueous hydrochloric acid and comparable to those obtained with organic complexing reagents. Separations are sharp and quantitative; up to 10 mmol of magnesium can be separated from 0.01 mmol of calcium and vice versa on a 60-ml column. Al, Fe(III), Mn, Ni(II), Co(II), Zn, Cd, Cu(II), Pb(II), U(VI), Be, Ga, Ti(IV) in the presence of H₂O₂ and many other elements accompany magnesium and can be separated from calcium quantitatively. Sr, Ba, Zr, Hf, Th, Sc, La and the rare earths are retained together with Ca, but can be separated by other methods.     

The application of the spectroelectrochemical method in the studies of molybdenum,tungsten, and uranium in chloride melts

The behavior of molybdenum(III), tungsten(IV), and uranium(VI) ions in NaCl-2CsCl-eutectic-mixture-based melt at 550°C is studied by spectroelectrochemical method. Anodic oxidation of MoCl₆³⁻ and WCl₆²⁻ yields melt-soluble chloride compounds MoCl₆²⁻ and WCl₆⁻ respectively. It is shown that the electrochemical recharging in the Mo(III)/Mo(IV) system is reversible; the formal standard potential E*_{Mo(IV)/Mo(III)}and the Gibbs energy $ \Delta G_{MoCl_4 (melt)}^* $ \Delta G_{MoCl_4 (melt)}^* are evaluated. The cathodic reduction of U(VI) yields U(V) ions. The cathodic reduction of W(IV) ion does not yield melt-soluble tungsten compounds of lower oxidation state.     

Anion-exchange separations of metal ions in thiocyanate media

The analytical potential of a weak-base macroreticular anion-exchange resin for the quantitative separation of metal ions in thiocyanate media is investigated and demonstrated. Distribution data are given for the sorption of some 25 metal ions from aqueous mixtures of potassium thiocyanate (1.0M or less) and 0.5M hydrochloric acid. The magnitude of the distribution data suggests many possible separations, some of which were quantitatively performed by procedures which are fast, simple and require only mild conditions. Representative separations are removal of traces of iron(III) and copper(II) from water samples prior to the determination of water hardness (calcium and magnesium), separation of nickel(II) from vanadium(IV) and the separation of thorium(IV) from titanium(IV). Some multicomponent separations are the separation of rare earths(III) and thorium(IV) from scandium(III) and the separation of rare earths(III) from iron(III) and uranium(VI).     

Extraction of molybdenum(VI) by 4-(5-nonyl)pyridine in benzene from aqueous mineral acid solutions containing thiocyanate ions

Extraction of Mo(VI) by 4-(5-nonyl)pyridine (NPy) in benzene from mineral acid solutions containing thiocyanate ions has been investigated at room temperature (23±2°C). From mineral acid (HCl, HNO₃, and H₂SO₄) solutions alone Mo(VI) is not extracted quantitatively while the presence of small amounts of KSCN in the system augments the extraction by a large factor. Stoichiometric studies indicate that ion-pair type complexes (NPyH)₂·[MoO₂(SCN)₄] are responsible for the extraction. Separation factors determined at fixed extraction conditions (0.1M Npy/C₆H₆–0.1M acid +0.2M KSCN) reveal that Ag(I), Cu(II), Co(II), Zn(II), Hg(II) and U(VI) are co-extracted while a clean separation from alkali metals, alkaline earths and some transition metals like Ln(III), Zr(IV), Hf(IV), Cr(III), Cr(VI) and Ir(III) is possible. Some of the complexing anions like oxalate, citrate, acetate, thiosulfate or ascorbate do not affect the degree of extraction of Mo(VI) allowing it to be recovered from diverse matrices.     

Kinetic study of the Ce(III)‐, Mn(II)‐ or Fe(phen)32+‐catalyzed Belousov‐Zhabotinsky reaction with 2‐ketoglutaric acid

The Belousov‐Zhabotinsky (BZ) reaction of bromate ion with 2‐ketoglutaric acid (KGA) in aqueous sulfuric acid catalyzed by Ce(III), Mn(II), or Fe(phen)₃²⁺ ion exhibits sustained barely damped oscillations under aerobic conditions. In general, the reaction oscillates without an induction period. Fe(phen)₃²⁺ ion behaves differently from Ce(III) and Mn(II) ions in catalyzing this oscillating system. The gem‐diol form of KGA exhibits different behavior from that of the keto form of KGA in the BZ reaction. The kinetics and mechanism of the reaction of KGA with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion was investigated. The order of relative reactivities of metal ions toward reaction with KGA is Mn(III) > Ce(IV) ≫ Fe(phen)₃³⁺. Experimental results are rationalized. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 101–107, 2001