微波辅助溶剂热法合成烟酸锌配位聚合物

首次利用微波辅助溶剂热法,10min便成功地合成了烟酸锌配位聚合物并对其性质进行了表征。讨论了时间、温度、底物浓度、加热方法及溶剂等因素对产物结晶情况和晶体粒径大小的影响;将微波溶剂热与传统溶剂热法相结合,得到的产物既具备了微波加热反应速度快、晶体成核均匀等优点,同时也得到了较大的单晶体并对其进行了晶体结构解析。     

水溶性聚合物热稳定性研究进展

水溶性聚合物广泛应用于石油开采、水处理、造纸、印染以及医药等领域,该类聚合物热稳定性问题直接关系到其在高温环境下的应用性能,因此具有重要的研究意义和应用价值。本文选取了几类具有代表性的水溶性聚合物,详细综述了其热稳定性的研究进展,重点分析了不同类型的水溶性聚合物的热降解机理,并探讨了分子结构和外添加剂对热稳定性能的影响,最后对其发展前景进行了展望。     

热致相分离法制备聚合物微孔材料

热致相分离是一种制备聚合物微孔材料的有效方法。本文介绍了聚合物初始浓度、聚合物分子量、稀释剂、冷却速率、萃取剂、聚合物密度等因素对热致相分离法制备聚合物微孔材料的影响,并对热致相分离法制备新型微孔材料的最新研究进展进行了综述。     

聚合物电致发光二极管热特性研究

采用ANSYS有限元分析软件中热分析结构单元,对聚合物电致发光二极管(PLED)在光强为1000cd/m2时的热特性进行模拟,获得其温度场、热流分布及温度梯度的分布图,从仿真结果知PLED器件的最高温度为45.968℃,处于PFO-BT发光层,最低温度为45.95℃,处于石英玻璃基底末端.计算得出聚合物发光器件总热阻为1305℃/W,聚合物发光层至石英玻璃基底末端热阻为1℃/W.通过改变PLED器件输入功率、基底材料以及基底厚度3个参数,分别模拟得出其对PLED器件热特性的影响,仿真结果表明器件最高温度TH与输入功率P显现良好的线性关系;不同基底材料对器件温度影响小,负极端为器件主要散热通径;当基底厚度不断增加时,PLED器件最高温度随着增加,而最低温度不断减少,器件总热阻基本不变,发光层至石英基底末端热阻线性增大.     

热漫散射在聚合物中的应用

从热漫散射可以获得与聚合物材料中无序结构和热运动有关的电子密度涨落、纵声子群速和等温压缩率等参数.本文介绍和评述了热漫散射的理论及其应用.     

高分子聚合物对激光热透镜分析的增强作用

本文报道非水溶性高分子对激光热透镜在痕量金分析中的增强作用，结果表明，聚氯乙烯（ＰＶＣ）能改变体系的热物理特性，并使体系最大吸收波长蓝移，从而增强热透镜光谱（ＴＬＳ）的信号强度，该方法的分析灵敏度比分光光度法高三个数量级，成功地用于化探样品中痕量金的测定。     

聚合物中激化的冷冻和热刺激

用等速升温、阶路升温、剩余电荷等方法测量了聚丙烯的热刺激电流。对于α和β峰，冷冻电荷方法有更高的分辨率和对称的线型。热刺激电流包含了快极化和慢极化机构的贡献，但线型主要决定于后者。慢极化涉及聚合物长分子链局部链段的运动与束缚空间电荷的相互作用。     

液晶聚合物网络研究进展

综述了液晶聚合物网络的新进展。包括液晶热固体、液晶弹性体和液晶互穿网络。介绍了各种网络的合成、主要性能和应用前景。     

晶态非极性聚合物内聚能密度的估算

有关凝聚态结构对聚合物内聚能密度的影响,在高分子物理学界一直未被关注。本文首次提出了利用结晶熔融热估算晶态非极性聚合物内聚能密度的方法,并对结晶态的聚四氟乙烯、聚乙烯和聚丙烯的内聚能密度进行了估算。估算值较好地解释了上述聚合物用作塑料但内聚能密度较小的理由。结晶熔融热本质上反映了非极性聚合物的晶态与非晶态分子间色散力相...     

一个判别液晶聚合物状态的新方法

伴随液晶相转变而产生的转变焓、转变熵可提供有关各相的结构、状态及有序度等信息.本文从动力学、热力学角度分析了液晶聚合物从各向同性熔体冷却时系统的热熵变化,建立了液晶聚合物升降温过程中的热熵图,提出了定量判断液晶聚合物从各向同性熔体冷却后所处状态的新方法.     

P(St-AM)核壳聚合物微球的制备及其光子晶体膜

采用一步乳液聚合法,调节引发剂用量,制备了不同粒径的具有核壳结构的功能性聚(苯乙烯-丙烯酰胺)乳胶微球.用透射电子显微镜表征了乳胶微球的核壳结构和粒径,所制微球的粒径分别为195,217,234和255 nm.用红外光谱对微球的化学成分进行了表征,证实聚丙烯酰胺已包覆在聚苯乙烯外层.通过竖直沉积自组装法制备了聚合物微球的光子晶体薄膜.扫描电子显微镜表征了所制光子晶体膜的表面形貌,反射和透射光谱表征了光子禁带.结果表明,聚合物微球以面心立方紧密堆积,其(111)面与基底平行;微球粒径不同,光子晶体的光子禁带不同.制备了不同光子禁带的光子晶体,禁带分别位于473,515,574和630 nm,相应的薄膜分别呈蓝色、绿色、黄色和红色,对于光子晶体的拓展和应用具有重要的意义.     

系列甘露糖醛酸寡糖的制备与鉴定

用酸降解法制备了系列甘露糖醛酸寡糖(聚合度2～8),并分析测定了寡糖的结构. 褐藻胶经部分酸水解,于pH=2.85处分级获得聚甘露糖醛酸. 继续用酸降解法降解聚甘露糖醛酸,经凝胶柱层析分离纯化,获得系列甘露糖醛酸寡糖. 用荧光标记糖电泳(FACE)对寡糖进行了分析,并用电喷雾离子化质谱(ESI-MS)、 核磁共振波谱(NMR)及红外光谱(FTIR)进行了结构表征. 本研究用酸降解法制备饱和甘露糖醛酸寡糖,用凝胶柱层析法分离获得系列聚合度的寡糖,为褐藻胶大分子构效关系研究和药物的筛选与发现提供了重要的基础资料.     

Preparation and properties of polyurethane networks based on α,ω-difunctional poly(hexafluoropropylene oxide)

Poly(hexafluoropropylene oxide), poly(HFPO), networks were prepared from functional polymers by end linking via urethane groups. The prepolymers were characterized by NMR spectroscopy and GPC. The networks were characterized by determination of the number of network chains from the shear modulus, and were snown to contain both trifunctional crosslinks and difunctional links. The properties of the networks were investigated by a range of techniques. Compared with fully-fluorinated networks formed via triazine cross-links, investigated previously, the urethane-linked networks were more readily prepared but were poorer elastomers, were less thermally stable, and were less resistant to swelling by common polar solvents. © 1995 John Wiley & Sons, Inc.     

对、间位卤代苯甲酸在水-乙醇混合溶剂中电离过程的焓、熵贡献

用LKB-2277Bioactivity Monitor测定了25℃时间氯、对氯和对氟苯甲酸在水-乙醇混合溶剂中的标准电离焓, 计算了相应体系的标准电离熵。利用Hammett方程对溶剂中酸的取代基常数σ进行了计算, 求取了对应的焓、熵取代基常数σH和σS值及熵反应常数ρS, 利用内部-环境模型和上述常数对溶剂效应和取代基效应进行了解释。     

有机溶剂热生长技术制备硫族化合物及其光学特性的研究

以有机溶剂热生长技术(solvothermaltechnique)制备了半导体硫族化合物(CdS、ZnS、MoS₂)等纳米颗粒,采用XRD、TEM等技术对其结构进行表征.以ITO导电玻璃以及导电聚合物(PANI、PPY)膜为基底,将纳米颗粒涂布其上并以PL法研究其光学特性,实验结果表明:经修饰后,材料的荧光发射位置发生显著的变化.     

微乳液合成胶体CuO/γ-Al2O3及其催化芳香硝基化合物还原（英文）

Monodispersed colloidal copper oxide nanoparticles were synthesized by water-in-oil microemulsion using CuCl 2·H2O and NaOH.The effect on CuO particle size was studied by varying the water-to-surfactant molar ratio,precursor concentration and molar ratio of NaOH to CuCl2.The morphology,size and size distribution of the particles were studied by transmission electron microscopy and dynamic light scattering.Dispersion destabilization of the colloidal copper oxide nanoparticles was detected by a Turbiscan apparatus.CuO/γ-Al2O3 catalysts were prepared by dispersing highly stable CuO nanoparticles on γ-alumina by mechanical stirring.The catalysts were analyzed by scanning electron microscopy,transmission electron microscopy,X-ray photoelectron,and X-ray diffraction,which confirmed the uniform dispersion of CuO on the support.The reduction of the nitro aromatic compounds,4-nitrophenol,3-nitrophenol,and 2-nitrophenol,were studied.The CuO/γ-Al2O3 catalysts were active for the reduction of these nitro aromatic compounds.     

Luminescent,optical, magnetic and metamaterial behavior of cerium complexes

The complexes of cerium with nitrogen, oxygen and sulfur donor ligands were prepared by conventional method. These newly synthesized complexes were characterized by FTIR, UV–Vis, DART Mass, TGA, PXRD, SEM and TEM techniques. The magnetic studies were carried out by the vibrating sample magnetometer. The optical constants were measured by absorption and reflection spectra as a function of wavelength. The concentration dependence of refractive index and absorption was observed by the experimental method, which reveals that these parameters are affected by change in concentration. The optical band gap obtained from Tauc-plot indicates its probability to be a good semiconductor. The luminescence behavior of these cerium complexes was observed by the absorption and emission spectra and the emission life time was calculated by their life time spectra.     

Preparation and Characterization of Nano-Structured SiO2 Thin Films on Carbon Steel

Nano-structured SiO2 thin films were prepared on the surface of carbon steel for the first time by LPD. The compositions of the films were analyzed by XPS, and the surface morphology of the thin films were observed by AFM. The thin films were constituted by compact particles of SiO2, and there was no Fe in the films. In the process of film forming, the SiO2 colloid particles were deposited or absorbed directly onto the surface of carbon steel substrates that were activated by acid solution containing inhibitor, and corrosion of the substrates was avoided. The nano-structured SiO2 thin films that were prepared had excellent protective efficiency to the carbon.     

孤岛油田含聚污水中酸性组分的分离与组成结构研究

采用石油醚和三氯甲烷分级萃取孤岛油田含聚污水中的油分,得到两个不同极性的组分F1和F2;用碱抽提法从酸值较高的F2组分中分离酸性物质并将其甲酯化,通过柱层析法将甲酯化物分成Ⅰ、Ⅱ和Ⅲ三个甲酯组分。用元素分析、红外光谱分析等对上述各组分的组成及结构进行鉴定,对甲酯组分Ⅰ进行GC MS 结构鉴定。结果表明,含聚污水中酸性乳化活性物质主要富集在F2组分中,降解HPAM是酸性物质的主要的组成部分;甲酯组分Ⅰ主要为石油酸甲酯,甲酯组分Ⅱ主要为含酰胺基的脂肪酸甲酯,甲酯组分Ⅲ除含有较多酰胺基脂肪酸甲酯外,还含有一定量的强极性含硫化合物;孤岛油田含聚污水中的轻质石油酸以单环环烷酸、四环环烷酸和脂肪酸为主,其中环烷酸的含量明显大于脂肪酸的含量。脂肪酸以C16和C18为主,单环环烷酸以C14~18为主,四环环烷酸以C18~21为主。     

New penta-ether as the internal donor in the MgCl2-supported Ziegler-Natta catalysts for propylene polymerization

The penta-ether compound was synthesized by the reaction of di(trimethylolpropane) with sodium hydride as the strong base and methyl iodide as the alkyl halide. This compound was characterized by NMR, FTIR, and GC techniques. The MgCl₂-supported titanium catalysts were incorporated with varying amounts of penta-ether compound as the internal donor and also the catalysts without the internal donor were synthesized. The synthesized catalysts and the conventional Ziegler- Natta catalyst were characterized. The titanium contents were determined by spectrophotometry, magnesium by complexometric titration and chloride by argentometric titration. The effects of the new internal donor on propylene polymerization with the prepared MgCl₂-supported Ziegler-Natta catalysts were investigated and then these results were compared to the results obtained using the conventional diisobutyl phthalate-besed-Ziegler-Natta catalyst. The highest crystallinity degree, melting temperature, and isotacticity of polypropylene were obtained using the catalyst with a penta-ether/Mg molar ratio equal to 0.21.