Study of a new derivatizing reagent that improves the analysis of amino acids by HPLC with fluorescence detection: application to hydrolyzed rape bee pollen

A simple and sensitive method for evaluating the chemical compositions of protein amino acids, including cystine (Cys)₂ and tryptophane (Try) has been developed, based on the use of a sensitive labeling reagent 2-(11H-benzo[α]-carbazol-11-yl) ethyl chloroformate (BCEC–Cl) along with fluorescence detection. The chromophore of the 1,2-benzo-3,4-dihydrocarbazole-ethyl chloroformate (BCEOC-Cl) molecule was replaced with the 2-(11H-benzo[α]-carbazol-11-yl) ethyl functional group, yielding the sensitive fluorescence molecule BCEC–Cl. The new reagent BCEC–Cl could then be substituted for labeling reagents commonly used in amino acid derivatization. The BCEC–amino acid derivatives exhibited very high detection sensitivities, particularly in the cases of (Cys)₂ and Try, which cannot be determined using traditional labeling reagents such as 9-fluorenyl methylchloroformate (FMOC-Cl) and ortho-phthaldialdehyde (OPA). The fluorescence detection intensities for the BCEC derivatives were compared to those obtained when using FMOC-Cl and BCEOC-Cl as labeling reagents. The ratios I _BCEC/I _BCEOC = 1.17–3.57, I _BCEC/I _FMOC = 1.13–8.21, and UV_BCEC/UV_BCEOC = 1.67–4.90 (where I is the fluorescence intensity and UV is the ultraviolet absorbance). Derivative separation was optimized on a Hypersil BDS C₁₈ column. The detection limits calculated from 1.0 pmol injections, at a signal-to-noise ratio of 3, ranged from 7.2 fmol for Try to 8.4 fmol for (Cys)₂. Excellent linear responses were observed, with coefficients of >0.9994. When coupled with high-performance liquid chromatography, the method established here allowed the development of a highly sensitive and specific method for the quantitative analysis of trace levels of amino acids including (Cys)₂ and Try from bee-collected pollen (bee pollen) samples.     

Development of a sensitive fluorescent derivatization reagent 1,2-benzo-3,4-dihydrocarbazole-9-ethyl chloroformate (BCEOC) and its application for determination of amino acids from seeds and bryophyte plants using high-performance liquid chromatography with fluorescence detection and identification with electrospray ionization mass spectrometry

A pre-column derivatization method for the sensitive determination of amino acids and peptides using the tagging reagent 1,2-benzo-3,4-dihydrocarbazole-9-ethyl chloroformate (BCEOC) followed by high-performance liquid chromatography with fluorescence detection has been developed. Identification of derivatives was carried out by liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS/MS). The chromophore of 2-(9-carbazole)-ethyl chloroformate (CEOC) reagent was replaced by 1,2-benzo-3,4-dihydrocarbazole functional group, which resulted in a sensitive fluorescence derivatizing reagent BCEOC. BCEOC can easily and quickly label peptides and amino acids. Derivatives are stable enough to be efficiently analyzed by high-performance liquid chromatography. The derivatives showed an intense protonated molecular ion corresponding m/z (M + H)⁺ under electrospray ionization (ESI) positive-ion mode with an exception being Tyr detected at negative mode. The collision-induced dissociation of protonated molecular ion formed a product at m/z 246.2 corresponding to the cleavage of CO bond of BCEOC molecule. Studies on derivatization demonstrate excellent derivative yields over the pH 9.0-10.0. Maximal yields close to 100% are observed with a 3-4-fold molar reagent excess. Derivatives exhibit strong fluorescence and extracted derivatization solution with n-hexane/ethyl acetate (10:1, v/v) allows for the direct injection with no significant interference from the major fluorescent reagent degradation by-products, such as 1,2-benzo-3,4-dihydrocarbazole-9-ethanol (BDC-OH) (a major by-product), mono-1,2-benzo-3,4-dihydrocarbazole-9-ethyl carbonate (BCEOC-OH) and bis-(1,2-benzo-3,4-dihydrocarbazole-9-ethyl) carbonate (BCEOC)₂. In addition, the detection responses for BCEOC derivatives are compared to those obtained with previously synthesized 2-(9-carbazole)-ethyl chloroformate (CEOC) in our laboratory. The ratios AC_BCEOC/AC_CEOC = 2.05-6.51 for fluorescence responses are observed (here, AC is relative fluorescence response). Separation of the derivatized peptides and amino acids had been optimized on Hypersil BDS C₁₈ column. Detection limits were calculated from 1.0 pmol injection at a signal-to-noise ratio of 3, and were 6.3 (Lys)-177.6 (His) fmol. The mean interday accuracy ranged from 92 to 106% for fluorescence detection with mean %CV < 7.5. The mean interday precision for all standards was <10% of the expected concentration. Excellent linear responses were observed with coefficients of >0.9999. Good compositional data could be obtained from the analysis of derivatized protein hydrolysates containing as little as 50.5 ng of sample. Therefore, the facile BCEOC derivatization coupled with mass spectrometry allowed the development of a highly sensitive and specific method for the quantitative analysis of trace levels of amino acids and peptides from biological and natural environmental samples.     

Pre-Column Derivatization of Amines with 1,2-Benzo-3,4-Dihydrocarbazole-9-Isopropyl Chloroformate Followed by LC-Fluorescence and LC-APCI-MS

A pre-column derivatization method for the sensitive determination of amines using the labeling reagent 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl chloroformate (BCIC-Cl) followed by high-performance liquid chromatography with fluorescence detection has been developed. Identification of derivatives is carried out by high performance liquid chromatography/atmospheric pressure chemical ionization (LC-APCI-MS-MS). The chromophore of 2-(9-carbazole)-ethyl chloroformate (CEOC) reagent is replaced by 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl functional group, which results in a sensitive fluorescence derivatizing reagent BCIC-Cl. BCIC-Cl can easily and quickly label amines. Derivatives are stable enough to be efficiently analyzed by high-performance liquid chromatography and show an intense protonated molecular ion corresponding m/z [MH]⁺ under APCI in positive-ion mode. The collision-induced dissociation of protonated molecular ion formed a product at m/z 260 corresponding to the cleavage of CH₂-OCO bond. Studies on derivatization demonstrate excellent derivative yields over the pH 9.0–10.0. Maximal yields close to 100% are observed with a 3 to 4-fold molar reagent excess. In addition, the detection responses for BCIC derivatives are compared with those obtained using CEOC and FMOC as derivatization reagents. The ratios of I_BCIC/I_CEOC and I_BCIC/I_FMOC are, respectively, 1.23–3.14 and 1.25–3.08 for fluorescent (FL) responses (here, I is relative fluorescence intensity). Separation of the derivatized amines had been optimized on reversed-phase Eclipse XDB-C₈ column. Detection limits are calculated from 1.0 pmol injection, at a signal-to-noise ratio of 3, are 10.6–37.8 fmol. The mean interday accuracy ranges from 94 to 105% for fluorescence detection with the largest mean %CV<7.5. The mean interday precision for all standards is < 6.0% of the expected concentration. Excellent linear responses are observed with coefficients of > 0.9997. Revised: 12 December 2005 and 13 Febrauary 2006     

An improved reagent for determination of aliphatic amines with fluorescence and online atmospheric chemical ionization-mass spectrometry identification

An improved reagent named 2-[2-(dibenzocarbazole)-ethoxy] ethyl chloroformate (DBCEC-Cl) for the determination of aliphatic amines by high-performance liquid chromatography (HPLC) with fluorescence detection and post-column online atmospheric chemical ionization-mass spectrometry (APCI-MS) identification has been developed. DBCEC-Cl could easily and quickly label aliphatic amines. Derivatives were stable enough to be efficiently analyzed by HPLC and showed an intense protonated molecular ion corresponding m/z [M+H]⁺ under APCI-MS in positive-ion mode. The ratios for fluorescence responses were I_DBCEC-amine/I_BCEC-amine = 1.02-1.60; I_DBCEC-amine/I_BCEOC-amine = 1.30-2.57; and I_DBCEC-amine/I_FMOC-amine = 2.20-4.12 (here, I was relative fluorescence intensity). The ratios for MS responses were IC_DBCEC-amine/IC_BCEC-amine = 4.16-29.31 and IC_DBCEC-amine/IC_BCEOC-amine = 1.23-2.47 (Here, IC: APCI-MS ion current intensity). Detection limits calculated from 0.0244 pmol injection, at a signal-to-noise ratio of 3, were 0.3-3.0 fmol. The relative standard deviations for within-day determination (n = 6) were 0.045-0.081% for retention time and 0.86-1.03% for peak area for the tested aliphatic amines. The mean intra- and inter-assay precision for all amine levels were <3.64% and 4.67%, respectively. The mean recoveries ranged from 96.9% to 104.7% with their standard deviations in the range of 1.80-2.70 (RSDs%). Excellent linear responses were observed with coefficients of >0.9991.     

Development of a Sensitive Reagent, 1,2-Benzo-3,4-dihydrocarbazole-9-ethyl-p-toluenesulfonate, for Determination of Bile Acids in Serum by HPLC with Fluorescence Detection, and Identification by Mass Spectrometry with an APCI Source

A pre-column derivatization method with 1,2-benzo-3,4-dihydrocarbazole-9-ethyl-p-toluenesulfonate (BDETS) as labeling reagent followed by high-performance liquid chromatography with fluorescence detection has been developed for sensitive determination of bile acids (BA). Derivatives were sufficiently stable to be efficiently analyzed by high-performance liquid chromatography. The derivatives also formed an intense protonated molecular ion corresponding to m/z (M + H)⁺, and fragment ions at (MH⁺ – H₂O)⁺, (MH⁺ – 2H₂O)⁺, and (MH⁺ – 3H₂O)⁺, in positive-ion mass spectrometry with an APCI source. Collision-induced dissociation of the protonated molecular ion produced fragment products at m/z 319.1 and 246.1 corresponding to cleavage of the C-O and N-CO bonds of derivative molecules. Maximum yields close to 100% were observed when a 10 to 15-fold molar excess of the reagent was used in the presence of potassium citrate as catalyst. The derivatives fluoresced strongly, which enabled the direct injection with no significant disturbance from the main by-products from reagent degradation, for example 1,2-benzo-3,4-dihydrocarbazole-9-ethanol (BDCE-OH). The limit of detection, at a signal-to-noise ratio of 3, was 12.94–21.94 fmol. Results from validation showed the method to be highly accurate and precise (<6.4%). Excellent linear responses were observed with correlation coefficients >0.9996.     

2-(2-Phenyl-1H-phenanthro-[9,10-d]imidazole-1-yl)-acetic acid (PPIA) and its application for determination of amines by high performance liquid chromatography with fluorescence detection and identification with mass spectroscopy/atmospheric pressure chemical ionization

A simple, sensitive, and mild method for the determination of amino compounds based on a condensation reaction with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDC·HCl) as the dehydrant with fluorescence detection has been developed. Amines were derivatized to their acidamides with labeling reagent 2-(2-phenyl-1H-phenanthro-[9,10-d]imidazole-1-yl)-acetic acid (PPIA). Studies on derivatization conditions indicated that the coupling reaction proceeded rapidly and smoothly in the presence of a base catalyst in acetonitrile to give the corresponding sensitively fluorescent derivatives with an excitation maximum at λ_ex 260 nm and an emission maximum at λ_em 380 nm. The labeled derivatives exhibited high stability and were enough to be efficiently analyzed by high-performance liquid chromatography. Identification of derivatives was carried out by online post-column mass spectrometry (LC/APCI-MS/MS) and showed an intense protonated molecular ion corresponding m/z [MH]⁺ under APCI in positive-ion mode. At the same time, the fluorescence properties of derivatives in various solvents or at different temperature were investigated. The method, in conjunction with a gradient elution, offered a baseline resolution of the common amine derivatives on a reversed-phase Eclipse XDB-C₈ column. LC separation for the derivatized amines showed good reproducibility with acetonitrile-water as mobile phase. Detection limits calculated from 0.78 pmol injection, at a signal-to-noise ratio of 3, were 3.1-18.2 fmol. The mean intra- and inter-assay precision for all amine levels were <3.85% and 2.11%, respectively. Excellent linear responses were observed with coefficients of >0.9996. The established method for the determination of aliphatic amines from real wastewater and biological samples was satisfactory.     

Development of a sensitive fluorescent derivatization reagent 1,2-benzo-3,4-dihydrocarbazole-9-ethoxy-carbonylhydrazine and its application for determination of aldehydes from alcoholic beverage using high-performance liquid chromatography with fluorescence detection and enhance mass spectrometric identification

A pre-column derivatization method for the sensitive determination of aldehydes using the tagging reagent 1,2-benzo-3,4-dihydrocarbazole-9-ethoxy-carbonylhydazine (BCEC) followed by high-performance liquid chromatography with fluorescence detection and enhance mass spectrometric identification has been developed. The chromophore of fluoren-9-methoxy-carbonylhydrazine (Fmoc-hydrazine) reagent was replaced by 1,2-benzo-3,4-dihydrocarbazole functional group, which resulted in a sensitive fluorescence derivatizing agent BCEC. BCEC can easily and quickly label aldehydes. The maximum excitation (333 nm) and emission (390 nm) wavelengths were essential no change for all the aldehyde derivatives. The fluorescence intensity was substantially affected by the solvents, being higher in organic than protic solvents. Derivatives are sufficiently stable to be efficiently analyzed by high-performance liquid chromatography. The derivatives showed an intense protonated molecular ion corresponding m/z [M + (CH₂)_n − 1]⁺ (M: molecular mass of BCEC, n: corresponding aldehyde carbon atom numbers) under positive-ion mode. The collision-induced dissociation of protonated molecular ion formed products at m/z = 245.7.0, m/z = 263.7 and m/z = 217.7, and corresponding the cleavage of CH₂OCO, CH₂OCO and NCH₂CH₂ bonds, respectively. Studies on derivatization demonstrated excellent derivative yields in the presence of trichloroacetic acid (TCA) catalyst. Maximal yields close to 100% were observed with a 10- to 15-fold molar reagent excess. Separation of the derivatized aldehydes has been optimized on ZORBAX Eclipse XDB-C₈ column with aqueous acetonitrile in conjunction with a binary gradient elution. Excellent linear responses were observed at the concentration range of 0.08-16.65 μmol/L with coefficients of >0.9999. Estimated detection limits for the aldehydes, obtained by successive dilution of a derivatized standard solution containing 16.65 μmol/L of each aldehyde (at a signal-to-noise ratio = 3:1), are from 3.75 to 16.65 fmol.     

A sensitive fluorescence reagent for the determination of aldehydes from alcoholic beverage using high-performance liquid chromatography with fluorescence detection and mass spectrometric identification

A pre-column derivatization method for the sensitive determination of aldehydes using the tagging reagent 2-[2-(7H-dibenzo[a,g] carbazol-7-yl)-ethoxy] ethyl carbonylhydrazine (DBCEEC) followed by high-performance liquid chromatography with fluorescence detection and APCI-MS identification has been developed. The chromophore of fluoren-9-methoxy-carbonylhydrazine (Fmoc-hydrazine) reagent was replaced by 2-[2-(7H-dibenzo[a,g] carbazol-7-yl)-ethoxy] ethyl functional group, which resulted in a sensitive fluorescence tagging reagent DBCEEC. DBCEEC could easily and quickly labeled aldehydes. The maximum excitation (300 nm) and emission (400 nm) wavelengths did not essentially change for all the aldehyde derivatives. Derivatives were sufficiently stable to be efficiently analyzed by high-performance liquid chromatography. The derivatives showed an intense protonated molecular ion corresponding m/z [M + (CH₂)_n]⁺ in positive-ion mode (M: molecular weight of DBCEEC, n: corresponding aldehyde carbon atom numbers). The collision-induced dissociation of protonated molecular ion formed fragment ions at m/z 294.6, m/z 338.6 and m/z 356.5. Studies on derivatization demonstrated excellent derivative yields in the presence of trichloroacetic acid (TCA) catalyst. Maximal yields close to 100% were observed with a 10 to 15-fold molar reagent excess. Separation of the derivatized aldehydes had been optimized on ZORBAX Eclipse XDB-C₈ column with aqueous acetonitrile as mobile phase in conjunction with a binary gradient elution. Excellent linear responses were observed at the concentration range of 0.01-10 nmol mL⁻¹ with coefficients of >0.9991. Detection limits obtained by the analysis of a derivatized standard containing 0.01 nmol mL⁻¹ of each aldehyde, were from 0.2 to 1.78 nmol L⁻¹ (at a signal-to-noise ratio of 3).     

Micellar electrokinetic chromatography-chemiluminescent detection of biogenic amines using N-(4-aminobutyl)-N-ethylisoluminol as derivatization reagent and trivalent copper chelate as chemiluminescence enhancer

A facile, sensitive and universal method was established for analysis of biogenic amines using micellar electrokinetic chromatography coupled with chemiluminescent (CL) detection. It was found that diperiodatocuprate (III) (K₅[Cu(HIO₆)₂], DPC), a transition metal chelate at unstable high oxidation state, could effectively enhance the reaction between luminol-type compound and hydrogen peroxide, to produce very strong CL signal. In addition, triethylamine was found to be able to effectively improve the yield of the derivatization reaction between biogenic amines and a luminol-type derivatization reagent, N-(4-aminobutyl)-N-ethylisoluminol (ABEI). Based on these facts, three biogenic amines were pre-column derivatized with ABEI, and post-column detected using high sensitive luminol-hydrogen peroxide-DPC CL system. Since the background was quite low, and the signal was quite strong, a considerable improved sensitivity was obtained. The presented method had been successfully applied to simultaneously analyze glycine, proline and phenylalanine with the detection limits (S/N = 3) of 0.030 μmol L⁻¹, 0.23 μmol L⁻¹ and 0.21 μmol L⁻¹, respectively. To evaluate its potential application value, glycine in saliva and urine samples was detected using this method, and satisfied results were obtained. This approach can be further extended to detection of many other compounds such as peptides and drugs by using luminol-type derivatization reagent.     

Redox-active antifungal cobalt(II) and copper(II) complexes with sterically hindered o-aminophenol derivatives

Co(II) complexes with 4,6-di(tert-butyl)-2-aminophenol (HL^I) and 2-anilino-4,6-di(tert-butyl)phenol (HL^II) have been synthesized and characterized by means of physico-chemical methods. The compounds HL^I and HL^II coordinate in their singly deprotonated forms and behave as bidentate O,N-coordinated ligands; their low-spin Co(II) complexes are characterized by CoN₂O₂ coordination modes and square planar geometry. Both the free ligands and their Co(II) and Cu(II) complexes (we have produced and characterized the latter before) exhibit a pronounced antifungal activity against Aspergillus niger, Fusarium spp., Mucor spp., Penicillium lividum, Botrytis cinerea, Alternaria alternata, Sclerotinia sclerotiorum, Monilia spp., which in a number of cases is comparable with that of Nystatin and Terbinafine or even higher. The reducing properties of the ligands and their metal(II) complexes, as well as their antifungal activities, were found to decrease in the order: Cu(L^I)₂ > Cu(L^II)₂ ? Co(L^I)₂ > Co(L^II)₂ > HL^I > HL^II.     

Redox-active metal(II) complexes of sterically hindered phenolic ligands: Antibacterial activity and reduction of cytochrome c. Part II. Metal(II) complexes of o-diphenol derivatives of thioglycolic acid

The synthesis and physico-chemical characterization of Fe(II) and Mn(II) complexes of 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfanyl]acetic acid (HL^I) and 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfinyl]acetic acid (HL^II) were carried out. The investigation of the molecular and electronic structure of Cu(II), Ni(II), Zn(II), Fe(II) and Mn(II) complexes has been performed within the density functional theory (DFT) framework. The computed properties were compared to the experimental ones, and molecular structures of the compounds were proposed based on the array of spectral data and quantum chemical calculations. Antibacterial activity of the Fe(II) and Mn(II) complexes was evaluated in comparison with Cu(II), Co(II), Ni(II) and Zn(II) complexes and three standard antibiotics; it was found to follow the order: (1) Сu(L^I)₂ > Mn(L^I)₂ > HL^I > Ni(L^I)₂ > Zn(L^I)₂ > Fe(L^I)₂ > Co(H₂O)₂L^I; (2) Cu(L^II)₂ > Сo(L^II)₂ > Ni(L^II)₂ > Mn(H₂O)₂(L^II)₂ > Fe(L^II)₂ > HL^II > Zn(L^II)₂; their reducing ability (determined electrochemically) followed the same order. Spectrophotometric investigation was carried out in order to estimate the rate of the reduction of bovine heart сytochrome c with the ligands and their metal(II) complexes. The complexes Сu(L^I)₂, Mn(L^I)₂ and Co(L^II)₂ with the high reducing ability were found to be characterized by the highest rates of Cyt с reduction. NADPH:cytochrome P450-reductase had no substantial effect on the rate of сytochrome c reduction with HL^I and HL^II ligands.     

Identification and determination of carboxylic acids in food samples using 2-(2-(anthracen-10-yl)-1H-phenanthro[9,10-d]imidazol-1-yl)ethyl 4-methylbenzenesulfonate (APIETS) as labeling reagent by HPLC with FLD and APCI/MS

A new labeling reagent for carboxylic acids, 2-(2-(anthracen-10-yl)-1H-phenanthro[9,10-d]imidazol-1-yl)ethyl 4-methylbenzenesulfonate (APIETS) has been designed and synthesized. It was used to label eight fatty acids (lauric acid, myristic acid, palmitic acid, stearic acid, arachidic acid, oleic acid, linoleic acid and linolenic acid) and four hydroxy pentacyclic triterpene acids (oleanolic acid, ursolic acid, betulinic acid and maslinic acid), successfully. APIETS could easily and quickly label carboxylic acids in the presence of K₂CO₃ catalyst at 85 °C for 35 min in N,N-dimethylformamide solvent. The carboxylic acids derivatives were separated on a C₈ reversed-phase column with gradient elution and fluorescence detection at λ_ex/λ_em = 315/435 nm. Identification of these derivatives was carried out by online mass spectrometry with atmospheric pressure chemical ionization in positive ion mode. The detection limits obtained were 13.37-30.26 fmol (signal-to-noise ratio of 3). The proposed method has been applied to the quantification of carboxylic acids in sultana raisin (Thompson seedless), hawthorn flake (Crataegus pinnatifida Bge.), Lycium barbarum seed oil and Microula sikkimensis seed oil with recoveries over 95.3%. It has been demonstrated that APIETS is a prominent labeling reagent for determining carboxylic acids with high performance liquid chromatography.     

Redox-active metal(II) complexes of sterically hindered phenolic ligands: Antibacterial activity and reduction of cytochrome c

The synthesis and physico-chemical characterization of Fe(II) and Mn(II) complexes of 4,6-di-tert-butyl-3[(2-hydroxyethyl)sulphanyl]-1,2-dihydroxybenzene (HL^I) and 2-amino-4,6-di-tert-butylphenol (HL^II) were carried out. Antibacterial activity of the Co(II), Fe(II) and Mn(II) complexes was evaluated in comparison with Cu(II) complexes and three common antibiotics; it was found to follow the order: (1) Сu(L^I)₂ > Сo(L^I)₂ > Fe(L^I)₂ ? Mn(L^I)₂ > HL^I; (2) Сu(L^II)₂ > Сo(L^II)₂ > HL^II > Fe(L^II)₂ ? Mn(L^II)₂; and their reducing ability (determined electrochemically) followed the same order. Spectrophotometric investigation was carried out in order to estimate the rate of the reduction of bovine heart сytochrome c with the ligands and their metal(II) complexes. NADPH:cytochrome P450-reductase was found to increase the rate of сytochrome c reduction with HL^I and HL^II ligands, while adrenodoxin in couple with NAD(P)H: adrenodoxin reductase had no substantial effect thereon. It was shown that the reduction of сytochrome c with these compounds cannot be related solely to the facility of their oxidation оr ionization.     

Synthesis of a novel bistriazene reagent 4,4′-bis[3-(4-phenylthiazol-2-yl)triazenyl]biphenyl and its highly sensitive color reaction with mercury(II)

We report the synthesis of a novel bistriazene, 4,4′-bis(3-(4-phenylthiazol-2-yl)triazenyl)biphenyl (BPTTBP), and its highly sensitive color reaction with Hg²⁺. The new reagent was synthesized in good yield by coupling 2-amino-4-phenylthiazole with 4,4′-biphenyldiamine bisdiazonium salt. Using a blend of surfactants N-cetylpyridinium chloride (CPC) and polyethylene glycol n-octanoic phenyl ether (OP) as a micelle sensitizer, the red colored reagent assembles with Hg²⁺ in pH 9.8 borate buffer according to a 1:1 stoichiometry, forming a blue oligomeric/polymeric chelating complex with a high apparent stability constant (1.1 × 10⁸ M⁻¹). Whereas the maximum absorption of reagent occurs at 510 nm with an extinct coefficient of 1.35 × 10⁴ M⁻¹ cm⁻¹, the complex absorbs at 611 nm, with an apparent extinct coefficient of 1.04 × 10⁵ M⁻¹ cm⁻¹. Beer's law is obeyed in the range of 0-15 μg/25 mL Hg²⁺, and Sandell's sensitivity is 1.92 × 10⁻³ μg/cm². In the presence of thiourea and Na₄P₂O₇ as masking agents, the method was found free from interferences of foreign ions commonly occurring with mercury. The optimized protocol has been successfully applied to spectrophotometric determination of mercury in waste water samples. The features of the new reagent associated with its special structure were discussed, and an unprecedented “domino effect” was proposed to account for its unique chelating stoichiometry with Hg²⁺.     

Au(I)/Ag(I)-catalyzed annulation of sugar aldehyde tethered with 3-phenylprop-2-yn-1-yl ether with aryl amines for the pyrano[4,3-b]quinoline derivatives

Aryl amines undergo smooth annulation with O-phenylpropynyl sugar aldehyde in the presence of the Ph₃PAuCl (10 mol %)/AgSbF₆ (10 mol %) catalytic system to afford the corresponding tetrahydro-3aH-spiro[[1,3]dioxolo[4″,5″:4′,5′]furo[3′,2′:5,6]pyrano[4,3-b]quinoline-2,1′-cyclohexane] derivatives in good yields and selectivity.     

Fluorinated phosphorus compounds: Part 10. Bis(fluoroalkyl) S-alkyl phosphorothiolates and tris(fluoroalkyl) phosphorothionates

Treatment of bis(fluoroalkyl) phosphites (R_FCH₂O)₂P(O)H, where R_F was CF₃ or C₂F₅ with sulfur in pyridine at 80 °C gave salts of structure [(R_FCH₂O)₂P(O)SH]NC₅H₅ in 90 and 88% yield, respectively. The salts reacted with alkyl iodides in acetonitrile at 50 °C to furnish bis(fluoroalkyl) S-alkyl phosphorothiolates (R_FCH₂O)₂P(O)SR, where R was Me, Et, n- and i-Pr (when R_F = CF₃) and Me (when R_F = C₂F₅). Yields ranged from 21 to 57%. Bis(trifluoroethyl) S-methyl phosphorothiolate (CF₃CH₂O)₂P(O)SMe underwent fluorination by silver(I) fluoride in acetonitrile at room temperature to yield the phosphorofluoridate (CF₃CH₂O)₂P(O)F in 75% yield. Tris(fluoroalkyl) phosphorothionates (R_FCH₂O)₃P = S, where R_F was CF₃, C₂F₅ and C₃F₇, were prepared in 30-34% yield by heating the tris(fluoroalkyl) phosphites (R_FCH₂O)₃P and sulfur to 200 °C in a sealed tube for 8 h.     

Syntheses and structures of zinc and tin(II) compounds with hemilabile N-silyl-tert-butylamido and N-silyl-p-tolylamido ligands that contain pendent tert-butoxy groups

Syntheses and solid-state structures of zinc and tin(II) compounds, containing the N-silyl-amide ligands (O^tBu)(NR)SiMe₂, R = ^tBu (L^tBu), or R = p-tolyl (L^pTol), are reported. The N-silyl amines were synthesized by modified published procedures from commercially available Me₂SiCl₂, ^tBuOH, and ^tBuNH₂, or p-Me-C₆H₄NH₂, respectively. Treatment of SnCl₂ with LiL^pTol furnished Sn(L^pTol)₂, which was X-ray structurally characterized and shown to contain two covalent Sn-N bonds and two asymmetrical O → Sn donor bonds. The single-crystal X-ray structure of Sn(L^tBu)₂ revealed a much more symmetrically-coordinated, pseudo-trigonal-bipyramidal tin atom. Aminolysis of diethylzinc with HL^pTol produced [EtZn(L^pTol)]₂, which crystallized as a centrosymmetric dimer, containing four-coordinate zinc atoms connected by bridging amides. Zinc dichloride, by contrast, reacted with two equivalents of LiL^tBu to produce the homoleptic, pseudo-spirocyclic Zn(L^tBu)₂.     

Flow-injection catalytic spectrophotometic determination of molybdenum(VI) in plants using bromate oxidative coupling of p-hydrazinobensenesulfonic acid with N-(1-naphthyl)ethylenediamine

A novel flow-injection spectrophotometry has been developed for the determination of molybdenum(VI) at nanograms per milliliter levels. The method is based on the catalytic effect of molybdenum(VI) on the bromate oxidative coupling of p-hydrazinobenzenesulfonic acid with N-(1-naphthyl)ethylenediamine to form an azo dye (λ_max = 530 nm). Chromotropic acid (4,5-dihydroxy-2,7-naphthalenedisulfonic acid) acted as an effective activator for the molybdenum(VI)-catalyzed reaction and increased the sensitivity of the method. The reaction was monitored by measuring the change in absorbance of the dye produced. The proposed method allowed the determination of molybdenum(VI) in the range 1.0-20 ng mL⁻¹ with sample throughput of 15 h⁻¹. The limit of detection was 0.5 ng mL⁻¹ and a relative standard deviation for 10 ng mL⁻¹ molybdenum(VI) (n = 10) was 2.5%. The interfering ions were eliminated by using the combination of a masking agent and on-line minicolumn packed with cation exchanger. The present method was successfully applied to the determination of molybdenum(VI) in plant foodstuffs.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

Dioxouranium(VI)-carboxylate complexes: A calorimetric and potentiometric investigation of interaction with oxalate at infinite dilution and in NaCl aqueous solution at I = 1.0 mol L and T = 25 °C

In this paper we investigated the interactions between dioxouranium(VI) and oxalate using (H⁺-glass electrode) potentiometry and titration calorimetry. Potentiometric measurements were carried out in NaCl aqueous solutions and at T = 25 °C in a wide range of experimental conditions (concentrations, ligand/metal molar ratio, pH, titrants) at low ionic strength values (I ≤ 0.090 mol L⁻¹, without supporting electrolyte) and at I = 1.0 mol L⁻¹; different procedures were employed for the acquisition of experimental data and careful analysis of these data performed. In all cases the speciation model that best fits experimental data takes into account the formation of the binary mononuclear species UO₂(ox)⁰, UO₂(ox)₂²⁻, UO₂(ox)₃⁴⁻ widely reported in literature, the ternary hydroxyl mononuclear species UO₂(ox)OH⁻, UO₂(ox)(OH)₂²⁻, UO₂(ox)₂OH³⁻, UO₂(ox)₃OH⁵⁻, the protonated ternary mononuclear species UO₂(ox)₃H³⁻ and the binuclear species (UO₂)₂(ox)₅⁶⁻.Calorimetric measurements were carried out following similar procedures and in the same experimental conditions as employed for the potentiometric measurements at I = 1.0 mol L⁻¹ in NaCl. The stability of UO₂²⁺-oxalate²⁻ complexes is fairly high and their main contribution to stability is entropic in nature. Some linear empirical relationships were found which make it possible to calculate (i) the contribution of a single bond: and ; (ii) chelate stabilisation per ring: and and (iii) the mean stability of negatively charged Na⁺-ion pair complexes: log^TK = (0.46 ± 0.02)·|z| (z = charge of complex species), ΔG° = −(2.60 ± 0.1)·|z| kJ mol⁻¹ and TΔS° = 2.5 ± 0.5 kJ mol⁻¹. Both potentiometric and calorimetric results provide evidence of the penta-coordination of the species UO₂(ox)₃⁴⁻. SIT parameters were calculated from the data at I = 0 and I = 1.02 mol kg⁻¹. Comparisons are made with literature data. An insoluble dioxouranium(VI) ternary complex was synthesised (at I = 1.0 mol L⁻¹ in NaCl) and characterised by thermoanalysis and elemental analysis.