A Structural Study of Epoxidized Natural Rubber (ENR-50) and Its Cyclic Dithiocarbonate Derivative Using NMR Spectroscopy Techniques

A structural study of epoxidized natural rubber (ENR-50) and its cyclic dithiocarbonate derivative was carried out using NMR spectroscopy techniques. The overlapping ¹H-NMR signals of ENR-50 at δ 1.56, 1.68-1.70, 2.06, 2.15-2.17 ppm were successfully assigned. In this work, the ¹³C-NMR chemical shift assignments of ENR-50 were consistent to the previously reported work. A cyclic dithiocarbonate derivative of ENR-50 was synthesized from the reaction of purified ENR-50 with carbon disulfide (CS₂), in the presence of 4-dimethylaminopyridine (DMAP) as catalyst at reflux temperature. The cyclic dithiocarbonate formation involved the epoxide ring opening of the ENR-50. This was followed by insertion of the C-S moiety of CS₂ at the oxygen attached to the quaternary carbon and methine carbon of epoxidized isoprene unit, respectively. The bands due to the C=S and C-O were clearly observed in the FTIR spectrum while the ¹H-NMR spectrum of the derivative revealed the peak attributed to the methylene protons had split. The ¹³C-NMR spectrum of the derivative further indicates two new carbon peaks arising from the >C=S and quaternary carbon of cyclic dithiocarbonate. All other ¹H- and ¹³C-NMR chemical shifts of the derivative remain unchanged with respect to the ENR-50.     

Fast and reversible migrations of N,S-centered groups around the perimeter of cyclopropene and cycloheptatriene rings

The kinetics and mechanism of circumambulatory rearrangements of N-centered (NCS) and S-centered (SPh, SC₃Ph₃, SC(OEt)=S) groups in corresponding derivatives of 1,2,3-triphenylcyclopropene and cycloheptatriene were studied by dynamic¹H and¹³C NMR spectroscopy. Migrations of the isothiocyanate group occur by the dissociation-recombination mechanism with intermediate formation of a tight ionic pair. Migrations of the phenylthio group around the perimeter of cyclopropene and cycloheptatriene rings occur by the 1,2-shift mechanism. It was found that rearrangements of theO-ethyl dithiocarbonate group inS-(1,2,3-triphenylcyclopropen-3-yl)-O-ethyl dithiocarbonate occur by the 3,3-sigmatropic shift mechanism. The molecular and crystal structure ofO-ethylS-(1,2,3-triphenylcyclopropen-3-yl) dithiocarbonate was studied by X-ray analysis.     

Electrochemical lithium intercalation into WO3 and lithium tungstates Li x WO3+ x /2 of various structures

Hexagonal and monoclinic tungsten trioxides WO₃ and hexagonal lithium tungstates Li _x WO_{3+ x /2} (x = 0.10–0.42) from a soft chemistry route were used as the active cathode material in secondary lithium batteries. The hexagonal structures, regardless of their being an oxide or a tungstate, showed higher specific capacities and better cycling behavior in Li⁺ intercalation reactions than the monoclinic form. The presence of pre-allocated lithium (as Li₂O) in hexagonal tungstates decreased the capacity for lithium intercalation. Additionally, the plot of open-circuit voltage (OCV) against the depth of intercalation (n) for anhydrous tungstates showed two straight lines with different slopes that can be related to the structural changes in lithium intercalation. The effective diffusion coefficients of lithium insertion into the host structure, D˜, were also found to be dependent on the structure and the composition of these compounds. Received: 28 November 1997 / Accepted: 6 March 1998     

Synthesis and radical polymerization of styrene‐based monomer having a five‐membered cyclic dithiocarbonate structure

A styrene‐based monomer having a five‐membered cyclic dithiocarbonate structure, 4‐vinylbenzyl 1,3‐oxathiolane‐2‐thione‐5‐ylmethyl ether (VBTE), was synthesized from 4‐vinylbenzyl glycidyl ether (VBGE) and carbon disulfide in the presence of lithium bromide in 86% yield. Radical polymerization of VBTE in dimethyl sulfoxide by 2,2′‐azobisisobutyronitrile was carried out at 60 °C to afford the corresponding the polymer, polyVBTE, in 64% yield. PolyVBTE with number‐averaged molecular weight higher than 31,000 was obtained. The glass transition temperature (T_g) and 5 wt % decomposition temperature (T_d5) of the polyVBTE were evaluated to be 66 and 264 °C under nitrogen atmosphere by differential scanning calorimetry and thermal gravimetry analysis, respectively. It was confirmed that a polymer consisting of the same VBTE repeating unit could also be obtained via polymer reaction, that is, a lithium bromide‐catalyzed addition of carbon disulfide to a polyVBGE prepared from a radical polymerization of VBGE. Copolymerization of VBTE and styrene with various compositions efficiently gave copolymers of VBTE and styrene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Effect of the ZnNi y Mn2– y O4 (0 ≤ y ≤ 1) spinel composition on electrochemical lithium insertion

The electrochemical insertion of lithium in the spinel-type manganite with the formula ZnNi _y Mn_{2– y} O₄ has been studied. The galvanostatic discharge curves show that the best performance is obtained for y = 0.25, where a tetragonal to cubic structural transformation occurs. The thermodynamics and kinetics of the process of insertion of the lithium into the tetragonal spinel Li _x ZnNi_0.25Mn_1.75O₄ (x = 0.05–1.3) have been studied. The molar thermodynamic quantities, such as enthalpy, entropy and free energy determined by EMF-T measurements, varied with the lithium concentration in the oxide structure, and a major variation was observed around x = 0.8. The chemical diffusion coefficient of lithium in these spinels was also determined. Structural analysis, degree of oxidation and magnetic susceptibility measurements were carried out for the lithiated oxides in order to obtain the cationic distribution as a function of x. It has been possible to demonstrate that, upon lithium insertion, Mn⁴⁺ ions on B sites are reduced to Mn³⁺ and then to Mn²⁺. A cooperative Jahn-Teller effect is present in these spinel manganese-nickel oxides. Received: 4 February 1997 / Accepted: 11 April 1997     

An Exploratory Study of Silylated Amino Boronic Ester Chemistry

Diisopropyl [bis(trimethylsilylamino)methyl]-boronate, the analogous pinacol boronic ester ( 3 ), andpinacol [(2,2,5,5-tetramethyl-2,5,1-disilazol-1-yl)-methyl]boronate ( 8 ) were prepared from the corresponding (bromomethyl)boronic ester 1 or 2 and silylated lithium amide. Reaction of 3 or 8 with (dichloromethyl)lithium yielded the corresponding [1-chloro-2-(silylated amino)ethyl]boronate 4 or 9 . Further transformations of 4 to methylthio derivative 5 and dimethylamino derivative 7 as well as conversion of 5 to ureido derivatives 6 are described. (S,S)-1,2-Dicyclohexylethanediol [1-chloro-2-(trityloxy)-ethyl]boronate ( 13 ) has been converted to bis(tri-methylsilyl)amino derivative 14 and formamido derivative 15 as well as to N-benzyl analogs 18 and 19 . Attempted chain extensions of 14, silylated 15, or 19 with (dichloromethyl)lithium indicated that the alkyl migration from boron to carbon is slow and incomplete. © 1997 John Wiley & Sons, Inc. Heteroatom Chem 8: 487–494, 1997     

Synthesis of reactive poly(norbornene): Ring‐opening metathesis polymerization of norbornene monomer bearing cyclic dithiocarbonate moiety

A norbornene monomer bearing cyclic dithiocarbonate moiety (NB‐DTC) was successfully synthesized from the corresponding precursor having epoxy moiety by its reaction with carbon disulfide. NB‐DTC underwent the ring‐opening metathesis polymerization (ROMP) catalyzed by a ruthenium carbene complex to give the corresponding poly(norbornene). The dithiocarbonate moiety incorporated into the side chain of the obtained poly(norbornene) reacted with amine to afford the corresponding thiourethane moiety with thiol group, which underwent oxidative S‐S coupling and/or addition reaction to the C‐C double bond in the main chain, leading to formation of a cross‐linked polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Glyconothio-O-lactones. Part I. Preparation and reactions with nucleophiles

Furanoid and pyranoid glyconothio-O-lactones were prepared by photolysis of S-phenacyl thioglycosides or by thermolysis of S-glycosyl thiosulfinates, which gave better results than the thionation of glyconolactones with Lawesson's reagent. Thermolysis of the thiosulfinates obtained from the dimannofuranosyl disulfide 7 or the manofuranosyl methly disulfide 8 (Scheme 2) gave low yields of the thio-O-lactone 2 . However, photolysis of the S-phenacyl thioglycoside 6 obtained by in situ alkylation of the thiolato anion derived from 5 led in 78–89% to 2 . Similarly, the dithiocarbonate 10 was transformed, via 11a , into the ribo-thio-O-lactone 12 (79%). Thermolysis of the peracetylated thiosulfinates 14 (Scheme 3) led to the intermediate thio-O-lactone 15 , which underwent facile β-elimination of AcOH (→ 16 , 75%) during chromatography. The perbenzylated S-glucopyranosyl dithiocarbonate 18 (Scheme 4) was transformed either into the S-phenacyl thioglucoside 19 or into a mixture of the anomeric methyl disulfides 21a/b . Whereas the photolysis of 19 led in moderate yield to 2-deoxy-thio-O-lactone 20 , oxidation of 21b and thermolysis of resulting thiosulfinates gave the thio-O-lactone 4 (79%), which was transformed into 20 (36%) upon photolysis. The pyranoid manno-thio-O-lactone 26 was prepared in the same way and in good yields from 22 via the dithiocarbonate 24b and the disulfide 25 . The ring conformations of the δ-thio-O-lactones, flattened ⁴C₁ for 15 and 4 and B_2,5 for 26 , are similar to the ones of the O-analogous oxo-glyconolactones. The reaction of 2 (Scheme 5) with MeLi and then with MeI gave the thioglycoside 27 (29%) and the dimeric thio-O-lactone 29 (47%). The analogous treatment of 2 with lithium dimethylcuprate (LiCuMe₂) and MeI led to a 4:1 mixture (47%) of 31 and 27 . The structure of 2 was proven by an X-ray analysis, and the configuration at C(6) and C(5) of 29 was deduced from NOE experiments. Substitution of MeI by CD₃I led to the CD₃S analogues of 27 , 29 , and 31 , i.e. 28 , 30 , and 32 , respectively, evidencing carbophilic addition and ‘exo’-attack on 2 by MeLi and the enethiolato anion derived from 2 . The preferred ‘endo’-attack of LiCuMe₂ is rationalized by postulating a single-electron transfer and a diastereoselective pyramidalization of the intermediate radical anion.     

Synthesis and Tuberculostatic Activity of Methyl 3-Isonicotinoyldithiocarbazate and S,S'-Dimethyl Dithiocarbonate Isonicotinoylhydrazone, and Their Reactions with Amines and Hydrazines

Methyl 3-isonicotinoyldithiocarbazates and S,S'-dimethyl dithiocarbonate isonicotinoylhydrazone were prepared. Their reactions with primary and secondary amines, diamines, and hydrazines were studied. The newly obtained derivatives did not show tuberculostatic activity in vitro.     

Lithium Azide as an Electrolyte Additive for All‐Solid‐State Lithium–Sulfur Batteries

Of the various beyond‐lithium‐ion battery technologies, lithium–sulfur (Li–S) batteries have an appealing theoretical energy density and are being intensely investigated as next‐generation rechargeable lithium‐metal batteries. However, the stability of the lithium‐metal (Li°) anode is among the most urgent challenges that need to be addressed to ensure the long‐term stability of Li–S batteries. Herein, we report lithium azide (LiN₃) as a novel electrolyte additive for all‐solid‐state Li–S batteries (ASSLSBs). It results in the formation of a thin, compact and highly conductive passivation layer on the Li° anode, thereby avoiding dendrite formation, and polysulfide shuttling. It greatly enhances the cycling performance, Coulombic and energy efficiencies of ASSLSBs, outperforming the state‐of‐the‐art additive lithium nitrate (LiNO₃).     

NEW PRODUCTS OF REACTION OF LAWESSON'S REAGENT WITH DIOLS

Reaction of the Lawesson's reagent (LR) with aliphatic 1,2- and 1,3-diols as well as with aromatic 2,2′-dihydroxybiphenyl led to new products. Stable di-tert-butylammonium salts of bis-anisyldithiophosphonic acids 6 were isolated and were then converted into unique 9-, 9-, and 10-membered cyclic disulfides 7 and into S,S-dimethyl esters 8. The salts of bis-anisyldithiophosphonic acids 6 were shown to be capable of splitting the disulfide bond of Ellman's reagent.     

Electrochemical and structural investigations of the reaction of lithium with tin-based composite oxide glasses

Tin-based composite oxide materials have received considerable attention as potential anode materials for rechargeable lithium batteries. In this contribution we present the results of our investigations of the SnOB₂O₃P₂O₅ system. We have investigated its electrochemical properties and especially its cycling performance. A focus of our interest was to explain the structural changes which occur during lithium cycling and their strong dependence on the preparation method. A part of the SnO component was converted into a very stable metallic phase. In addition, a decrease was observed in capacity owing to the formation of isolated and inactive tin grains. We also report on structural changes in the B₂O₃P₂O₅ matrix. Received: 2 October 1997  / Accepted: 3 July 1998     

Reaction of diethyldithi ophosphorus acid anilide with aromatic aldehydes

Conclusions The reaction of S,S-diethyl N-phenylamidodithiophosphite with benzaldehyde and p-nitrobenzaldehyde leads to the formation of the corresponding-anilinodithiophosphonates.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1643–1644, July, 1982.     

Anionic polymerization of methacrylate monomers initiated by lithium dialkylamides

The anionic polymerization of methacrylate monomers has been investigated with lithium dialkylamides as initiators in THF and toluene, respectively. Theoretical arguments and previous studies of mixed aggregates of lithiated organic compounds support the complexity of these systems. Lithium diisopropylamide (LDA) shows the highest initiation efficiency (e.g., f = 75% in THF at −78°C). Interestingly enough, lithium chloride has a remarkable beneficial effect on the methacrylates polymerization in THF at −78°C, due to the formation of 1 : 1 mixed dimer with LDA, which promotes a well-controlled anionic polymerization (M_w/M_n = 1.05) with a high initiation efficiency (94%). The less bulky lithium–diethylamide (LDEA) is much less efficient (f = 26%), essentially as a result of some associated “dormant” species and side reactions on the carbonyl group of MMA. Although various types of ligands have been screened, no remarkable improvement of LDEA efficiency has been observed. Lithium bis(trimethylsilyl)amide (LTMSA) has also been used to increase the steric hindrance of the initiator. This compound is, however, unable to initiate the methacrylates polymerization, more likely because of a too low basicity and a too strong Li—N bond. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3637–3644, 1997     

Characterization of a Multicomponent Lithium Lithiate from a Combined X‐Ray Diffraction,NMR Spectroscopy,and Computational Approach

An unusual lithium lithiate [Li(diglyme)₂][(diglyme)Li₂(C₄H₃S)₃], made up from three carbanions, two lithium cations, and a single donor base molecule in the anion and a single lithium cation, coordinated by two donor base molecules, is investigated in a combined study including X‐ray diffraction, NMR spectroscopy and computational approaches in solution and the solid state. While the multicomponent lithiate is the only species present in the solid state, solution NMR spectroscopy and computational methods were employed to identify a second species in solution. The dimer [(diglyme)Li(C₄H₃S)]₂ coexists with the lithiate in solution in a 1:1 ratio, the more the higher the polarity of the solvent is. Only the combination of this multitude of methods provides a firm picture of the whole.     

Intercalation materials for lithium rechargeable batteries

An overview is given of intercalation materials for both the negative and the positive electrodes of lithium batteries, including the results of our own research. As well as lithium metal as a negative electrode, we consider insertion materials based on aluminium alloys. In the case of the positive electrode metal-oxides based on manganese, nickel and cobalt are discussed. Received: 27 May 1997 / Accepted: 30 July 1997     

Synthesis of copolyamides based on PA 66 bearing lithium sulfonate groups and having unique thermal properties

Copolyamides of PA 66/6 lithium 5‐sulfoisophthalic acid (LiSIPA) containing up to 40 mol % of LiSIPA were prepared in a 1L‐pilot reactor operating at high pressures and high temperatures. Interestingly, the presence of lithium sulfonate moieties highly impacted the glass transition temperature of the polyamide. The T_g increased from 59 °C for PA 66 to 155 °C for a copolymer containing about 40 mol % of LiSIPA. 1,3‐Dihexylbenzenedicarboxamide and lithium p‐toluenesulfonate were synthesized as model compounds to investigate the interaction of lithium sulfonate moieties and amide functions. Infrared spectroscopy using ATR technology performed on mixture of both compounds showed that the carbonyl group of amide functions interacts with the lithium cation of lithium sulfonate moieties. Similar S? O and C? O adsorption bands were observed in copolyamides PA 66/6LiSIPA and in mixture of model compounds, which strongly suggest the formation in the copolyamides of physical cross‐linking points centered on lithium cations coordinated by carbonyl groups of amide functions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Numerical study of the exchange effects in the valence and core energy bands of the metallic lithium chain

Minimal basis-set STO-3G calculations on the infinite metallic chain of lithium atoms, (SINGLE BOND Li SINGLE BOND)_x, performed within the Fourier space-restricted Hartree-Fock approach (FS-RHF), are reported to illustrate that the Fourier representation method, in which all lattice summations are accurately carried out to infinity, is able to reproduce the genuine features of the RHF approach for the metallic cases, i.e., the vanishing of the density of states at the Fermi energy. © 1997 John Wiley & Sons, Inc. Int J Quant Chem 63: 709–718, 1997     

Preparation and characterisation of synthetic mixtures of lithium isotopes

Re-certification of the absolute isotopic composition of the natural lithium isotopic reference material (IRM), IRMM-016, requires measurements calibrated by means of synthetic mixtures of highly enriched lithium isotopes. Ten such mixtures were prepared by weighing and mixing of two well characterised, isotopically enriched, Li₂CO₃ compounds. The starting materials, 99.9981% enriched ⁶Li, and 99.9937% enriched ⁷Li, were purified by ion exchange, and the purified materials converted from LiOH to Li₂CO₃ by reaction with CO₂. Ten new mixtures were prepared by mixing different weighed amounts of these dissolved Li₂CO₃ carrier compounds. The compounds had an estimated level of impurities of 100 ± 100 μg · g^–1 (expanded uncertainty with a coverage factor of 2). In the ten mixtures, the n(⁶Li)/n(⁷Li) ratio varies from 0.025 to 14 and the achieved expanded relative uncertainty on the amount ratio prepared is typically 2 · 10^–4. These mixtures were then used to determine the correction factor, K, for mass discrimination of the measurement procedure and instrument concerned. Received: 6 November 1997 / Revised: 22 December 1997 / Accepted: 24 January 1998     

Computer-aided design (CAD) of Mn(II) complexes: superoxide dismutase mimetics with catalytic activity exceeding the native enzyme

New Mn(II) macrocyclic pentaamine complexes derived from the biscyclohexyl-pyridine complex, M40403 ([manganese(II)dichloro[(4R,9R,14R,19R)-3,10,13,20,26-pentaazatetracyclo[20.3.1.0.(4,9)0(14,19)]hexacosa-1(26),-22(23),24-triene]]), are described here. The complex M40403 was previously shown to be a superoxide dismutase (SOD) catalyst with rates for the catalytic dismutation of superoxide to oxygen and hydrogen peroxide at pH = 7.4 of 1.2 x 10(+7) M(-1) s(-1).(1) The use of the computer-aided design paradigm reported previously for this class of Mn(II) complexes(2,3) led to the prediction that the 2S,21S-dimethyl derivative of M40403 should possess superior catalytic SOD activity. The synthesis of this new macrocyclic Mn(II) complex, [manganese(II)dichloro[2S, 21S-dimethyl-(4R,9R,14R,19R)-3,10,13,20,26-pentaazatetracyclo[20.3.1.0.(4,9)0(14,19)]hexacosa-1(26),22(23),24-triene]], 5, was accomplished via a high yield template condensation utilizing the linear tetraamine, N,N'-Bis[(1R,2R)-[2-(amino)]cyclohexyl]-1,2-diaminoethane, 1, 2,6-diacetylpyridine, and MnCl(2) to form the macrocyclic diimine complex, 2, which then is reduced. The two other possible dimethyl diastereomers of 5 (2R,21R-dimethyl,3, and 2R,21S-dimethyl, 6) were also prepared via reduction of the diimine complex 2. Two of these complexes, 3 and 5, were characterized by X-ray structure determination confirming their absolute stereochemistry as 2R,21R-dimethyl and 2S,21S-dimethyl, respectively. The results of the MM calculations which predict that the 2S,21S-dimethyl complex, 5, should be a high activity catalyst and that the 2R,21R-dimethyl complex, 3, should have little or no catalytic activity are presented. The catalytic SOD rates for these complexes are reported for each of these complexes and a correlation with the modeling predictions is established showing that 2R,21R-complex, 3, has no measurable catalytic rate, while the 2R,21S complex, 6, is identical to M40403, and the 2S,21S- complex, 5, possesses a very fast rate at pH = 7.4 of 1.6 x 10(+9) M(-1) s(-1) exceeding that of the native mitochondrial MnSOD enzymes.