Fabrication of Covalently Linked PAH/PVS Layer-by-layer Assembled Multilayers via a Post-photochemical Cross-linking Strategy

A post-photochemical cross-linking strategy was successfully demonstrated to enhance the stability of polyelectrolyte poly(allylamine hydrochloride)(PAH)/poly(vinylsulfonic acid sodium salt)(PVS) multilayers. Conventional polyelectrolyte multilayers of PAH/PVS are usually fabricated through electrostatic layer-by-layer(LbL) assembly, resulting in poor stability, especially in basic solutions, which leads to the urgent demand for converting weak electrostatic interactions into covalent bonds to enhance the stability of the multilayers. This stability problem has been ultimately addressed by post-infiltrating a photosensitive cross-linking agent, 4,4'-diazostilbene-2,2'- disulfonic acid disodium salt(DAS), into the LbL assembled films to initiate the photochemical reaction to cross-link the multilayers. The obviously improved stability of the photo-cross-linked multilayers was demonstrated through experiments with basic solution treatments. Compared to the complete decomposition of uncross-linked multilayers in basic solution, over 74.4% of the covalently cross-linked multilayers were retained under the same conditions, even after a longer duration of basic solution treatment.     

Photoreactive azido-containing silica nanoparticle/polycation multilayers: durable superhydrophobic coating on cotton fabrics

In this study, we report the functionalization of silica nanoparticles with highly photoreactive phenyl azido groups and their utility as a negatively charged building block for layer-by-layer (LbL) electrostatic assembly to produce a stable silica nanoparticle coating. Azido-terminated silica nanoparticles were prepared by the functionalization of bare silica nanoparticles with 3-aminopropyltrimethoxysilane followed by the reaction with 4-azidobenzoic acid. The azido functionalization was confirmed by FTIR and XPS. Poly(allylamine hydrochloride) was also grafted with phenyl azido groups and used as photoreactive polycations for LbL assembly. For the photoreactive silica nanoparticle/polycation multilayers, UV irradiation can induce the covalent cross-linking within the multilayers as well as the anchoring of the multilayer film onto the organic substrate, through azido photochemical reactions including C-H insertion/abstraction reactions with surrounding molecules and dimerization of azido groups. Our results show that the stability of the silica nanoparticle/polycation multilayer film was greatly improved after UV irradiation. Combined with a fluoroalkylsilane post-treatment, the photoreactive LbL multilayers were used as a coating for superhydrophobic modification of cotton fabrics. Herein the LbL assembly method enables us to tailor the number of the coated silica nanoparticles through the assembly cycles. The superhydrophobicity of cotton fabrics was durable against acids, bases, and organic solvents, as well as repeated machine wash. Because of the unique azido photochemistry, the approach used here to anchor silica nanoparticles is applicable to almost any organic substrate.     

UV-cross-linkable multilayer microcapsules made of weak polyelectrolytes

Microcapsules composed of weak polyelectrolytes modified with UV-responsive benzophenone (BP) groups were fabricated by the layer-by-layer (LbL) technique. Being exposed to UV lights, capsules shrunk in the time course of minutes at irradiation intensity of 5 mW/cm(2). The shrinkage adjusted the capsule permeability, providing a novel way to encapsulate fluorescence-labeled dextran molecules without heating. Cross-linking within the capsule shells based on hydrogen abstraction via excited benzophenone units by UV showed a reliable and swift approach to tighten and stabilize the capsule shell without losing the pH-responsive properties of the weak polyelectrolyte multilayers.     

Sustained release control via photo-cross-linking of polyelectrolyte layer-by-layer hollow capsules

We describe the formation and permeability of polyelectrolyte multilayer hollow-shell capsules by photo-cross-linking and controlled-release (fluorescence) studies. The hollow shells were prepared by alternate layer-by-layer (LbL) adsorption of photo-cross-linkable benzophenone modified poly(allylamine hydrochloride) and poly(sodium 4-styrenesulfonate) on polystyrene particles, followed by removing the core with tetrahydrofuran. Zeta potential measurements, fourier transform infrared spectroscopy, and transmission electron microscopy were used to verify the LbL process integrity. A model drug, rhodamine B (RB), was successfully loaded into the polyelectrolyte hollow capsules. The release kinetics of RB was investigated using fluorescence spectroscopy. The permeability of RB through the hollow shells was effectively controlled based on UV irradiation time. It was shown that the release of RB molecules can be controlled by the degree of cross-linking induced in the multilayer.     

pH-sensitive bipolar ion-permselective ultrathin films

pH-Sensitive bipolar ion-permselective films of polyelectrolyte multilayers were prepared by layer-by-layer (LbL) assembly and photo-cross-linking of benzophenone-modified poly(acrylic acid) (PAA-BP) and poly(allylamine hydrochloride) (PAH-BP). The multilayer structure and ionizable group composition was finely tuned by changing the pH of the dipping solution. This structure and composition was in turn "preserved" by photo-cross-linking, forming highly stable membrane films. Since PAA-BP and PAH-BP are weak polyelectrolytes, it is possible to control the number of unbound, un-ionized -COOH or -NH2 groups in the multilayer by changing the pH. Moreover, the pH of the deposited film also plays an important role in determining selective latter permselectivity. For example, PAA-BP/PAH-BP multilayers deposited from two pH conditions, pH = 3 (PAA-BP) and pH = 6 (PAH-BP), showed pH-switchable permselectivity for both cationic (pH = 10) and anionic (pH = 3) probe molecules in a single film. The system offers advantages in film stability and introducing reversible selective ion permeability over previous multilayer film and cross-linking methods.     

Layer-by-layer self-assembled multilayers of redox polyelectrolytes and gold nanoparticles

Construction and characterization of structural and charge transport properties of electrostatically LbL self-assembled multilayers of gold nanoparticles and a viologen-based redox-active polyelectrolyte is reported.     

Micropatterning of polymer thin films with pH-sensitive and cross-linkable hydrogen-bonded polyelectrolyte multilayers

Polyelectrolyte multilayers of poly(acrylic acid) (PAA) and polyacrylamide (PAAm) were prepared via hydrogen-bonding interactions. These multilayers as assembled were stable at low pH but dissolved quickly in neutral pH water. We developed methods for stabilizing these multilayers to high pH through cross-linking by heating or UV-irradiation. Thermal treatment of the multilayers, which resulted in a partial imidization between carboxylic acid and amide groups, gave the multilayer good stability at high pH. In addition, we introduced photoreactive groups in the multilayer, which rendered the film insoluble after UV irradiation. Using these selective stabilization approaches, we have succeeded in micropatterning these films by ink-jet printing and photolithography to create subtractive patterns.     

Strong response of multilayer polyelectrolyte films to cationic surfactants

The influence of common cationic surfactants on the physical properties of differently composed polyelectrolyte films prepared by the layer-by-layer (LbL) technology was investigated. Free-standing polyelectrolyte films as microcapsules showed a fast, strong response to the addition of less than 1 mM cationic surfactant cetyltrimethylammonium bromide (CeTAB). As a function of the polyelectrolyte composition, the behavior of the capsules varied from negligible changes to complete disintegration via strong swelling. The response of microcapsules consisting of (poly(allylamine hydrochloride)(PAH)/poly(styrene sulfonate)(PSS))(4) was associated with a 5-fold volume increase, a fast switch of permeability, and in the case of fluorescently labeled films a 4-fold increase in fluorescence intensity. The kinetics and strengths of the interaction process were investigated by confocal laser scanning microscopy (CLSM) and fluorescence spectroscopy. Also, the relative stabilities of the polycation/polyanion and surfactant/polyanion complexes were determined. A mechanism was suggested to explain the interactions between the cationic surfactants and polyelectrolyte capsules. The strong response can be exploited in potential applications such as the triggered release of drugs or other encapsulated materials, the fluorescence-based detection of cationic detergents, and a switchable stopper in microchannels. However, the high sensitivity of LbL films to traces of cationic surfactants can also limit their applicability to the encapsulation of drugs or other materials because pharmaceutical or technical formulations often contain cationic surfactants as preservatives such as benzalkonium salts (BAC). It was demonstrated that undesired capsule opening can be effectively prevented by cross-linking the polyelectrolyte multilayers.     

DNA and polylysine adsorption and multilayer construction onto cationic lipid-coated microbubbles

We report on a novel application of the layer-by-layer (LbL) assembly technique to attach multiple layers of DNA and poly-l-lysine (PLL) onto preformed lipid-coated microbubbles to increase the DNA loading capacity. We first measured the effects of the cationic lipid fraction and salt concentration on the microbubble stability. Microbubble production and stability were robust up to a cationic lipid fraction of 40 mol % in 10 mM NaCl. DNA adsorption was heterogeneous over the microbubble shell and occurred primarily on the condensed phase domains. The amount of adsorbed DNA, and subsequently adsorbed PLL, increased linearly with the fraction of cationic lipid in the shell. DNA loading was further enhanced by the LbL assembly method to construct polyelectrolyte multilayers (PEMs) of DNA and PLL. PEM buildup was demonstrated by experimental results from zeta potential analysis, fluorescence microscopy, UV spectroscopy, and flow cytometry. The PEMs exhibited two growth stages and were heterogeneously distributed over the microbubble surface. The DNA loading capacity onto the microbubbles was enhanced by over 10-fold by using five paired layers. However, the PEM shell did not prevent oscillation or destruction during ultrasound insonification. These results suggest that the surface can be compartmentalized to make multifunctional, high-payload ultrasound contrast agents for targeted gene therapy.     

Tuning smart microgel swelling and responsive behavior through strong and weak polyelectrolyte pair assembly

The layer-by-layer (LbL) assembly of polyelectrolyte pairs on temperature and pH-sensitive cross-linked poly(N-isopropylacrylamide)-co-(methacrylic acid), poly(NIPAAm-co-MAA), microgels enabled a fine-tuning of the gel swelling and responsive behavior according to the mobility of the assembled polyelectrolyte (PE) pair and the composition of the outermost layer. Microbeads with well-defined morphology were initially prepared by synthesis in supercritical carbon dioxide. Upon LbL assembly of polyelectrolytes, interactions between the multilayers and the soft porous microgel led to differences in swelling and thermoresponsive behavior. For the weak PE pairs, namely poly(L-lysine)/poly(L-glutamic acid) and poly(allylamine hydrochloride)/poly(acrylic acid), polycation-terminated microgels were less swollen and more thermoresponsive than native microgel, whereas polyanion-terminated microgels were more swollen and not significantly responsive to temperature, in a quasi-reversible process with consecutive PE assembly. For the strong PE pair, poly(diallyldimethylammonium chloride)/poly(sodium styrene sulfonate), the differences among polycation and polyanion-terminated microgels are not sustained after the first PE bilayer due to extensive ionic cross-linking between the polyelectrolytes. The tendencies across the explored systems became less noteworthy in solutions with larger ionic strength due to overall charge shielding of the polyelectrolytes and microgel. ATR FT-IR studies correlated the swelling and responsive behavior after LbL assembly on the microgels with the extent of H-bonding and alternating charge distribution within the gel. Thus, the proposed LbL strategy may be a simple and flexible way to engineer smart microgels in terms of size, surface chemistry, overall charge and permeability.     

Single Polyelectrolyte Microcapsules Fabricated By Glutaraldehyde‐Mediated Covalent Layer‐By‐Layer Assembly

Summary: Single polyelectrolyte component microcapsules and multilayers, exemplified by poly(allylamine hydrochloride) (PAH), have been prepared using a method of glutaraldehyde (GA)‐mediated covalent layer‐by‐layer (LbL) assembly. The GA cross‐linking of the adsorbed PAH results in surfaces covered by reactive aldehyde groups, which can then react with PAH to result in another layer of covalently linked PAH. The repeated assembly of single polyelectrolyte in an LbL manner can be thus achieved. The PAH multilayers can grow linearly along with the layer number, and their thickness can be controlled at the nanometer scale, as verified by UV‐vis absorption spectrometry and ellipsometry. Single polyelectrolyte microcapsules are obtained after removal of the template cores at low pH. The morphology and integrity are confirmed by scanning force microscopy and confocal laser scanning microscopy.

Schematic illustration of the preparation of a single polyelectrolyte component microcapsule by GA‐mediated covalent LbL assembly.     

UV-light and visible-light photochromism of inorganic–organic multilayer films based on polyoxometalate and poly(acrylamide)

Novel UV-light and visible-light photochromic inorganic–organic multilayers composed of polyoxometalates (phosphomolybdic acid (PMoA)) and poly(acrylamide) (PAM) were prepared by the layer-by-layer (LbL) self-assembly method. The grown process, composition, surface topography, and photochromic properties and mechanism of the multilayer films were investigated by ultraviolet–visible (UV–vis) spectra, Fourier transform infrared spectra (FT-IR), atomic force microscopy (AFM), electron resonance spectra (ESR), and X-ray photoelectron spectra (XPS). Irradiation with UV-light or visible-light, the transparent films changed from colorless to blue and showed reversible photochromism. PMoA/PAM LbL films had higher photochromic efficiency under UV-light irradiation than visible-light irradiation. The bleaching process occurred when the films were in contact with O₂ in the dark or heated in air. The photochromic process of PMoA/PAM LbL film was in accordance with radical mechanism.     

Ordered Polyelectrolyte Multilayers: Unidirectional FRET Cascade in Nanocompartmentalized Polyelectrolyte Multilayers

Multifunctional polyelectrolyte (or layer‐by‐layer, LbL) multilayers consisting of a set of nanocompartments separated by impermeable ultrathin barriers, whereby the thickness of the compartments is tuned in the range 1–10 nm, are synthesized. Each compartment contains a different dye, introduced by co‐adsorption during multilayer deposition. Different LbL barriers are tested for impermeability towards dye diffusion while simultaneously allowing energy transfer to occur between the compartmentalized dyes. Cross‐linked LbL multilayers based on poly(acrylic acid) and poly(allyl amine) are shown to provide the desired impermeability for thicknesses as small as about 2.5 nm. A proof‐of‐concept system is then realized involving a cascade of two FRET processes, whereby the light energy is collected in a first nanocompartment containing pyranine, sent to a second nanocompartment loaded with fluorescein, before finally being transferred to a third, Nile blue‐filled compartment located at the external surface of the film. This demonstrates the possibility to fabricate complex light‐harvesting antenna systems by LbL assembly while controlling the architecture of the antenna down to a few nanometers.     

Self-assembled graphene/azo polyelectrolyte multilayer film and its application in electrochemical energy storage device

Graphene/azo polyelectrolyte multilayer films were fabricated through electrostatic layer-by-layer (LbL) self-assembly, and their performance as electrochemical capacitor electrode was investigated. Cationic azo polyelectrolyte (QP4VP-co-PCN) was synthesized through radical polymerization, postpolymerization azo coupling reaction, and quaternization. Negatively charged graphene nanosheets were prepared by a chemically modified method. The LbL films were obtained by alternately dipping a piece of the pretreated substrates in the QP4VP-co-PCN and nanosheet solutions. The processes were repeated until the films with required numbers of bilayers were obtained. The self-assembly and multilayer surface morphology were characterized by UV-vis spectroscopy, AFM, SEM, and TEM. The performance of the LbL films as electrochemical capacitor electrode was estimated using cyclic voltammetry. Results show that the graphene nanosheets are densely packed in the multilayers and form random graphene network. The azo polyelectrolyte cohesively interacts with the nanosheets in the multilayer structure, which prevents agglomeration of graphene nanosheets. The sheet resistance of the LbL films decreases with the increase of the layer numbers and reaches the stationary value of 1.0 × 10(6) Ω/square for the film with 15 bilayers. At a scanning rate of 50 mV/s, the LbL film with 9 bilayers shows a gravimetric specific capacitance of 49 F/g in 1.0 M Na(2)SO(4) solution. The LbL films developed in this work could be a promising type of the electrode materials for electric energy storage devices.     

Robust ion-permselective multilayer films prepared by photolysis of polyelectrolyte multilayers containing photo-cross-linkable and photolabile groups

The azobenzene-containing polyanion PAC-azoBNS was alternately assembled with the polycation diazoresin (DAR) to construct photo-cross-linkable multilayer films of PAC-azoBNS/DAR that contain photolabile groups of azobenzene. Upon mild UV irradiation, the interaction between PAC-azoBNS/DAR multilayers was converted from electrostatic interaction to covalent bonds. Because of the free carboxylic acid groups presented in the film, the photo-cross-linked multilayer film favors the selective permeation of positively charged species. After photolysis of the photo-cross-linked PAC-azoBNS/DAR films with intense UV irradiation, azobenzene groups decompose to produce imine groups, and a photo-cross-linked robust film containing free carboxylic acid and imine groups was fabricated. The resultant film allows the permeation of negatively charged species and meanwhile shows a pH-switchable permselectivity for positively charged species. Because of the covalently cross-linking structure, the photolyzed cross-linked PAC-azoBNS/DAR film shows high reversible switching behavior and has high stability in solution with high ionic strength.     

Fuzzy ternary particle systems by surface-initiated atom transfer radical polymerization from layer-by-layer colloidal core-shell macroinitiator particles

We report the synthesis of ternary polymer particle material systems composed of (a) a spherical colloidal particle core, coated with (b) a polyelectrolyte intermediate shell, and followed by (c) a grafted polymer brush prepared by surface-initiated polymerization as the outer shell. The layer-by-layer (LbL) deposition process was utilized to create a functional intermediate shell of poly(diallyl-dimethylammonium chloride)/poly(acrylic acid) multilayers on the colloid template with the final layer containing an atom transfer radical polymerization (ATRP) macroinitiator polyelectrolyte. The intermediate core-shell architecture was analyzed with FT-IR, electrophoretic mobililty (zeta-potential) measurements, atomic force microscopy, and transmission electron microscopy (TEM) techniques. The particles were then utilized as macroinitiators for the surface-initiated ATRP grafting process for poly(methyl methacrylate) polymer brush. The polymer grafting was confirmed with thermo gravimetric analysis, FT-IR, and TEM. The polymer brush formed the outermost shell for a ternary colloidal particle system. By combining the LbL and surface-initiated ATRP methods to produce controllable multidomain core-shell architectures, interesting functional properties should be obtainable based on independent polyelectrolyte and polymer brush behavior.     

Spontaneous surface flattening via layer-by-layer assembly of interdiffusing polyelectrolyte multilayers

We report a facile means to achieve planarization of nonflat or patterned surfaces by utilizing the layer-by-layer (LbL) assembly of highly diffusive polyelectrolytes. The polyelectrolyte pair of linear polyethylenimine (LPEI) and poly(acrylic acid) (PAA) is known to maintain intrinsic diffusive mobility atop or even inside ionically complexed films prepared by LbL deposition. Under highly hydrated and swollen conditions during the sequential film buildup process, the LbL-assembled film of LPEI/PAA undergoes a topological self-deformation for minimizing surface area to satisfy the minimum-energy state of the surface, which eventually induces surface planarization along with spontaneous filling of surface textures or nonflat structures. This result is clearly different from other cases of applying nondiffusive polyelectrolytes onto patterned surfaces or confined structures, wherein surface roughening or incomplete filling is developed with the LbL assembly. Therefore, the approach proposed in this study can readily allow for surface planarization with the deposition of a relatively thin layer of polyelectrolyte multilayers. In addition, this strategy of planarization was extended to the surface modification of an indium tin oxide (ITO) substrate, where surface smoothing and enhanced optical transmittance were obtained without sacrificing the electronic conductivity. Furthermore, we investigated the potential applicability of surface-treated ITO substrates as photoelectrodes of dye-sensitized solar cells prepared at room temperature. As a result, an enhanced photoconversion efficiency and improved device characteristics were obtained because of the synergistic role of polyelectrolyte deposition in improving the optical properties and acting as a blocking layer to prevent electron recombination with the electrolytes.     

Smoothing of Fast Assembled Layer-by-layer Films by Adjusting Assembly Conditions

To prepare layer-by-layer(LbL) multilayers in time-efficient manners by the dipping method is highly appealing. However, the fast LbL assembly produces multilayers with high surface roughness. In our attempt to smooth the surface morphologies of LbL multilayers obtained by fast assembly(5 s dipping), we studied the influence of the assembly conditions on the surface morphologies. The study shows that by properly adjusting the assembly conditions, such as washing duration, water annealing period, and drying with nitrogen flow, LbL multilayers with enhanced surface smoothness could be obtained through fast LbL assembly.     

层层自组装聚电解质膜光纤传感器的制备和应用

在过去几十年中,光纤的应用已经渗透到多个学科领域。光纤的抗电磁干扰、可远程监控、多重监测、体积小及质量轻等特点,使其在传感器研究领域备受关注。聚电解质层层自组装膜构建的光纤传感器自2000年诞生以来,已快速发展成为传感器领域新的研究热点。该类光纤传感器在微量物质的监测方面具有广泛的应用前景。本文从光纤和光纤传感器优点出发,总结了基于层层自组装多层膜的光纤传感器种类、性能、检测原理以及相应的光纤结构和自组装材料;进而结合作者已做的相关工作,论述了在光纤基底上的聚电解质层层自组装及基于自组装膜的光纤传感器的测试;重点综述了近十年层层自组装膜的光纤pH传感器、湿度传感器、气体传感器、生物传感器及其他类型的光纤传感器的制备与应用,并展望了今后聚电解质层层自组装多层膜光纤传感器的发展。     

Patterned polyelectrolyte multilayer: surface modification for enhancing selective adsorption

This paper describes the use of surface chemical modification to enhance the difference of the surface charge on a patterned polyelectrolyte multilayer, which can be used for selectively adsorbing functional materials. We fabricated a patterned multilayer by combining the layer-by-layer self-assembly technique and photolithography and taking advantage of the different solubility of polyelectrolyte multilayers of diazo resins (DAR)/poly(acrylic acid) before and after UV irradiation. This patterned surface can be used as a matrix for selective adsorption of small molecular dyes, such as Methylene Blue. However the difference in surface charge on the patterned surface was not enough when we used it to selectively adsorb polystyrene (PS) nanoparticles using electrostatic force as the driving force. Therefore, we modified the patterned surface by interfacial chemistry. After modification, the patterned polyelectrolyte multilayer can be used as a good matrix for selective adsorption of PS nanoparticles with both positive and negative charges.