Mutual interactions between nonionic surfactants and gelatin — investigations in cubic liquid crystalline systems and micellar systems

The mutual interactions between nonionic surfactants such as polyoxyethylene cetyl ethers (C₁₆EO _n ,n=15, 20) especially their cubic lyotropic liquid crystalline phases of typeI ₁ and polymer gelatin were investigated. The colloidal microstructure of such anI ₁-phase consisting of close-packed globular surfactant aggregates was shown by transmission electron microscopy (TEM). The diameter of the globules found by TEM correlated well with the periodic distance of about 7.5 nm obtained by small angle x-ray diffraction (SAXD). In ternary systems consisting of surfactant, gelatin, and water cubic liquid crystalline structures were also proved by polarized light microscopy, TEM, and SAXD. The polymer did not participate in the cubic structure but formed, at least in part, anisotropic spherulites. In diluted surfactant systems however, interactions between polymer and surfactants were clearly found by polarimetry. The nonionic surfactants caused an accelerated coil-helix transition of the polypeptid gelatin.     

Lyotropic liquid crystalline phase behavior of a polymeric amphiphile polymerized via their hydrophilic ends

The reaction of the nonionic low molecular mass surfactant 3, 6, 9, 12, 15, 18, 21, 24-octaoxaoctatriacontane-1-ol (CH₃(CH₂)₁₃(OCH₂CH₂)₈OH, C₁₄E₈) with acryloyl chloride yielded the monomeric amphiphile II (CH₃(CH₂)₁₃(OCH₂CH₂)₈O₂C-(CH:CH₂) with the polymerizable group located at the hydrophilic end of the molecule. Using radical polymerization, the polymeric surfactant III is obtained. These three surfactant water systems exhibit lyotropic liquid crystalline phases. The binary phase diagrams are compared with each other. In changing from the monomer-water to the polymer-water system a stabilization of the lyotropic mesophases is observed with amphiphiles which are connected via their hydrophilic ends; it is known for the surfactants to be connected via their hydrophobic ends. The appearance of the inverse mesophases, as expected from the molecular geometry of the polymer, is not observed.     

Polymeric alkenoxy amino acid surfactants: IV. effects of hydrophobic chain length and degree of polymerization of molecular micelles on chiral separation of beta-blockers

Four alkenoxy leucine-based surfactants with C8-C11 chains containing a terminal double bond, and one C11 chain surfactant with a terminal triple bond are synthesized and characterized in monomeric and polymeric forms. These polymeric pseudophases are then utilized to study the influence of chain length and DP for the enantioseparations of seven beta-blockers in MEKC. Variations in chain length and concentration of polymeric surfactants showed significant effects on the chiral resolution (Rs) and efficiency (N). A relatively large elution range combined with the highest polarity and aggregation number (A) but the lowest retention time, partial specific volume, and optical rotation generated with C8-polymeric surfactant results in simultaneous enantioseparation of all seven beta-blockers with higher N and R(s). In particular, highly hydrophobic beta-blockers are better resolved with shorter hydrocarbon chain even at higher surfactant concentration, which is unachievable with longer chain surfactant. On the other hand, polymer derived from C11-triple bond provided smaller A value compared to C11-double bond surfactant. However, chiral Rs of hydrophobic beta-blockers are still achievable with the C11-triple bond surfactant with enhanced N and shorter analysis time. In addition, effect of polymerization concentration is evaluated by polymerizing all five surfactants at five times their respective CMCs and 100 mM equivalent monomer concentrations. Polymerization of shorter chain (C8 and C9) double-bonded surfactants at five times their respective CMCs results in higher A values with better chiral Rs and N compared to the same two surfactants polymerized at 100 mM.     

Oil Solubilization Capacity,Liquid Crystalline Properties,and Antibacterial Activity of Alkanolamine‐Based Novel Cationic Surfactants

A series of monomeric and dimeric cationic surfactants with tuned polarity was synthesized. Oil solubilization capacity, thermotropic liquid crystalline properties, and minimum inhibitory concentration (MIC) of novel hydroxylated cationic surfactants using selected gram positive and gram negative bacteria were examined. Antibacterial activity and the propensity of gemini surfactants for oil solubilization were observed to be better than those of corresponding monomeric surfactants. Pseudo ternary phase diagrams for these surfactants, methyl methacrylate (MMA), and water clearly showed, that microemulsions can be easily formulated with all these surfactants. Solubilization and foam studies of mixed surfactant systems were also examined. Molecular architecture like the tail length, head group area, and presence of ethanolic goups in the surfactant affect the performance properties. Unlike conventional gemini surfactants the synthesized gemini surfactants also show thermotropic liquid crystalline properties (smectic‐A, L_α phase).     

Dispersion polymerization of 2-hydroxyethyl methacrylate (HEMA) using siloxane-based surfactant in supercritical carbon dioxide and in compressed liquid dimethyl ether

The free radical dispersion polymerization of 2-hydroxyethyl methacrylate (HEMA) has been carried out in supercritical carbon dioxide (scCO₂) and compressed liquid DME using several surfactants. The polymerization are performed in the presence of fluorine-based poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl acrylate) [poly(HDFDA)], poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl methacrylate) [poly(HDFDMA)], or poly(HDFDMA-co-MMA) and siloxane-based PDMS-g-pyrrolidonecarboxylic acid (Monasil PCA™) or PDMS modified surfactants, SS-5050K™ and KF6017™ as polymerization surfactants. When scCO₂ was used as a polymerization medium, the PHEMA were heavily agglomerated. However, the spherical and relatively uniform poly(2-hydroxyethyl methacrylate) (PHEMA) particles could be produced even at 20 bar, with a narrow particle size distribution in compressed liquid DME. It was observed that fluorine-based surfactants were not a good surfactant as siloxane-based surfactants for the dispersion polymerization of HEMA. The average particle size of PHEMA was shown to be dependent on the type of the surfactant, the amount of the surfactant and initiator added to the system. The effect of two continuous phases, which are scCO₂ and compressed liquid DME, as a polymerization medium, the surfactant types and the concentration, initiator concentration, and monomer concentration on the morphology and size of the polymer particles was also investigated.     

Lyotropic liquid crystalline phase behaviour of a monomeric and a polymeric monosaccharide amphiphile in aqueous solution

Monomeric and polymeric amphiphiles were synthesized which exhibit lyotropic liquid crystalline phases in aqueous solution. The hydrophobic group of the monomeric surfactant is a dodecane-group esterified with acrylic acid. The hydrophilic unit is a monosaccharide derivative. By radical polymerization the monomer (N-D(-)-gluco-N-methyl-(12-acryloyloxy)-dodecane-l-amide) is converted into the corresponding polymeric surfactant. The monomer as well as the polymer exhibit a lyotropic 1.c. phase of lamellar structure. Owing to the polymerization the regime of the lamellar phase is greatly enlarged for the polymer, compared to the monomeric sufactant. These results confirm earlier investigations on non-ionic ethylene-glycol surfactants.     

Amphiphilic Comb‐Like Poly(oxyethylene) and Its Complexes with LiClO4: Synthesis and Mesomorphic Behavior

Summary: We prepared an amphiphilic, comb‐like poly(oxyethylene) containing decyl‐tri(oxyethylene) amphiphiles in the side chain using a polymer analogous reaction to obtain a novel nonionic amphiphilic polymeric system with high molecular weight. The amphiphilic comb‐like poly(oxyethylene) itself only showed a side‐chain crystalline phase below its melting temperature of −31 °C. When the polymer was mixed with lithium perchlorate, a smectic liquid‐crystalline phase appeared. The ordered phases of the polymer and the polymer mixture were studied by differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction.

POM image (200 X) of D3OTP1 at room temperature.     

Effect of salt and surfactant on aqueous solution properties of pyrene-labeled poly(3-dimethyl (methylmethacryloyl ethyl) ammonium propane sulfonate)

Photophysical and solution properties of pyrene-labeled poly(3-dimethyl(methylmethacryloyl ethyl) ammonium propane sulfonate), poly(DMAPS/Py), were studied in terms of fluorescence emission measurement. The I_E/I_M was shown as a function of polymer concentration in deionized water. I_E/I_M value decreases with an increase in the salt concentration. The addition of surfactants to the aqueous solution of poly(DMAPS/Py) can either induce the mixed micelle of intra-polymer and its surrounding surfactants and/or mixed micelle of inter-polymers and their surrounding surfactants. Models of interactions between poly(DMAPS/Py) and surfactant or divalent salt in aqueous solution are proposed.     

Synthesis of a novel hybrid liquid‐crystalline rod–coil diblock copolymer

A series of novel rod–coil diblock copolymers on the basis of mesogen‐jacketed liquid‐crystalline polymer were successfully prepared by atom transfer radical polymerization from the flexible polydimethylsiloxane (PDMS) macroinitiator. The hybrid diblock copolymers, poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene}‐block‐polydimethylsiloxane, had number‐average molecular weights (M_n's) ranging from 9500 to 30,900 and relatively narrow polydispersities (≤1.34). The polymerization proceeded with first‐order kinetics. Data from differential scanning calorimetry validated the microphase separation of the diblock copolymers. All block copolymers exhibited thermotropic liquid‐crystalline behavior except for the one with M_n being 9500. Four liquid‐crystalline diblock copolymers with PDMS weight fractions of more than 18% had two distinctive glass‐transition temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1799–1806, 2003     

Surfactant effect on the lower critical solution temperature of poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups

 The surfactant effect on the lower critical solution temperature (LCST) of thermosensitive poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups was examined in terms of molecular interactions between the polyphosphazenes and surfactants including various anionic, cationic, and nonionic surfactants in aqueous solution. Most of the anionic and cationic surfactants increased the LCST of the polymers: the LCST increased more sharply with increasing length and hydrophobicity of the hydrophobic part of the surfactant molecule. The ΔLCSTs (T _0.03M− T _0M), the change in the LCST by addition of 0 and 0.03 M sodium dodecyl sulfate (SDS), were found to be 7.0 and 14.5 °C for the polymers bearing ethyl esters of glycine and aspartic acid, respectively. The LCST increase of poly(organophosphazene) having a more hydrophobic aspartic acid ethyl ester was 2 times larger compared with that of the polymer having glycine ethyl ester as a side group. The binding behavior of SDS to the polymer bearing glycine ethyl ester as a hydrophobic group was explained from the results of titration of the polymer solutions containing SDS with tetrapropylammonium bromide. Graphic models for the molecular interactions of polymer/surfactant and polymer/surfactant/salt in aqueous solutions were proposed. Received: 17 February 2000/Accepted: 25 April 2000     

Synthesis of comb‐type polycarbosilanes via nucleophilic substitution reactions on the main‐chain silicon atoms

A series of comb‐type polycarbosilanes of the type [Si(CH₃)(OR)CH₂]_n {where R = (CH₂)_mR′, R′ = ? O‐p‐biphenyl? X [X = H (m = 3, 6, 8, or 11) or CN (m = 11)], and R′ = (CF₂)₇CF₃ (m = 4)} were prepared from poly(chloromethylsilylenemethylene) by reactions with the respective hydroxy‐terminated side chains in the presence of triethylamine. The product side‐chain polymers were typically greater than 90% substituted and, for R′ = ? O‐p‐biphenyl? X derivatives, they exhibited phase transitions between 27 and 150 °C involving both crystalline and liquid‐crystalline phases. The introduction of the polar p‐CN substituent to the biphenyl mesogen resulted in a substantial increase in both the isotropization temperature and the liquid‐crystalline phase range with respect to the corresponding unsubstituted biphenyl derivative. For R = (CH₂)₁₁? O‐biphenyl side chains, an analogous side‐chain liquid‐crystalline (SCLC) polysiloxane derivative of the type [Si(CH₃)(O(CH₂)₁₁? O‐biphenyl)O]_n was prepared by means of a catalytic dehydrogenation reaction. In contrast to the polycarbosilane bearing the same side chain, this polymer did not exhibit any liquid‐crystalline phases but melted directly from a crystalline phase to an isotropic liquid at 94 °C. Similar behavior was observed for the polycarbosilane with a fluorocarbon chain, for which a single transition from a crystalline phase to an isotropic liquid was observed at ?0.7 °C. The molecular structures of these polymers were characterized by means of gel permeation chromatography and high‐resolution NMR studies, and the crystalline and liquid‐crystalline phases of the SCLC polymers were identified by differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 984–997, 2003     

Estimation of degree of counterion binding and related parameters of monomeric and dimeric cationic surfactants from cloud point measurements by using triblock polymer as probe

The cloud point (C _P) measurements of aqueous solutions of a triblock polymer (TBP) [(PEO)_2.5(PPO)₃₁(PEO)_2.5], in the presence of varying amounts of cationic surfactants (monomeric and dimeric alkylammoniumbromides) covering premicellar to postmicellar regions, have been carried out. A plot of C _P vs surfactant concentration allowed us to evaluate apparent critical micelle concentration (cmc*), which has been found to decrease with an increase in the amount of salt. The cmc* values thus obtained in the absence and presence of salt allowed us to evaluate counterion binding (β) by using the Corrin–Harkins method. β values have been further used to evaluate the thermodynamic parameters of these ionic surfactants. The results suggest that the β values evaluated using this method, especially at low [TBP], are in good agreement with those already reported in the literature.     

Thermosensitive amphiphilic polyphosphazenes and their interaction with ionic surfactants

Temperature-responding physical hydrogels are promising materials as injectable drug delivery carriers which could hold useful bioactive materials inside the polymer networks for further controlled releases. Aimed at desired qualities at body temperature, those gel characteristics need to be adjusted carefully. In this point of view, surfactant is one of the useful molecules to be used by simple formulations without harmful chemical reactions. In this study, thermothickening of amphiphilic nonionic polyphosphazene solution is modified by anionic and cationic surfactants with different alkyl chains and counter-ions. Specified in the thermothickening system, a maximum viscosity (η_max) and a temperature at that point (T_max) are changed independently reflecting unique intermolecular interactions. At low concentration (1–9 mM) of the added surfactant, the η_max is maximized at 3 mM surfactant regardless of the surfactant type while the T_max is increased continuously along with the surfactant concentration. From a kinetic point of view, this 3 mM surfactant at the maximized η_max reflects a polymer-dominating interaction and highly favorable polymer–surfactant interaction with a low selectivity in the surfactant type. However, the magnitude of the maximum viscosity (η_max) is dependent on the surfactant tail, which reflects the lifetime and the strength of the hydrophobic domains of the polymer network affected by the surfactants. Meanwhile, the magnitude of the T_max depended on the surfactant head group, which means the interfacial tension of the polymer solutions changed by the surfactants. At high concentration (10 and 30 mM) of the cationic surfactants added to the polymer solutions with two different viscosities, the cationic surfactants are supposed to interact either with the hydrophobic parts of the aggregated polymer with high viscosity or on the backbone of the less- or non-aggregated polymer with low viscosity.Ionic surfactants change the thermothickening of the amphiphilic nonionic polyphosphazene solution in a unique tail- or head-dependent way. Moreover, the concentration of the added surfactants and the association pattern of the pure polymer solutions are also crucial for the thermothickening phase behaviors. Temperature-responsive polyphosphazenes in this work exhibit unique and controllable interactions with ionic surfactants.     

Click Functionalization of a Dibenzocyclooctyne‐Containing Conjugated Polyimine

A conjugated poly(phenyl‐co‐dibenzocyclooctyne) Schiff‐base polymer, prepared through polycondensation of dibenzocyclooctyne bisamine (DIBO‐(NH₂)₂) with bis(hexadecyloxy)phenyldialdehyde, is reported. The resulting polymer, which has a high molecular weight (M_n>30 kDa, M_w>60 kDa), undergoes efficient strain‐promoted alkyne–azide cycloaddition reactions with a series of azides. This enables quantitative modification of each repeat unit within the polymer backbone and the rapid synthesis of a conjugated polymer library with widely different substituents but a consistent degree of polymerization (DP). Kinetic studies show a second‐order reaction rate constant that is consistent with monomeric dibenzocyclooctynes. Grafting with azide‐terminated polystyrene and polyethylene glycol monomethyl ether chains of varying molecular weight resulted in the efficient syntheses of a series of graft copolymers with a conjugated backbone and maximal graft density.     

Influence of alkoxy tail length and unbalanced mesogenic core on phase behavior of mesogen‐jacketed liquid crystalline polymers

When the flexible terminal substituent changes from butoxy to hexyloxy or longer, smectic C (S_C) liquid crystalline phase was firstly reported to develop from a kind of mesogen‐jacketed liquid crystalline polymer (MJLCP) whose mesogenic side groups are unbalancedly bonded to the main chain without spacers. A series of MJLCPs, poly[4,4′‐bis(4‐alkoxyphenyl)‐2‐vinylbiphenyl(carboxide)] (nC2Vp, n is the number of the carbons in the alkoxy groups, n = 2, 4, 6, 8, 10, and 12) were designed and synthesized successfully via free radical polymerization. The molecular weights of the polymers were characterized with gel permeation chromatography, and the liquid crystalline properties were investigated by differential scanning calorimetry, polarized light microscopy experiments, and 1D, 2D wide‐angle X‐ray diffraction. Comparing with the butoxy analog, the polymer with unbalanced mesogenic core and shorter flexible substituents (n = 2, 4) keeps the same smectic A (S_A) phase, but other polymers with longer terminal flexible substituents (n = 6, 8, 10, and 12) can develop into a well‐defined S_C phase instead of S_A phase. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 505–514, 2009     

Influence of fluorinated substituent and terminal length on phase behavior of mesogen‐jacketed liquid crystalline polymers with a biphenyl mesogen

A series of mesogen‐jacketed liquid crystalline polymers, poly{2,2,3,3,4,4,4‐heptafluorobutyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PF3Cm, where m is the number of carbon atoms in the alkoxy groups, and m = 1, 4, 6, and 8), the side chain of which contains a biphenyl core with a fluorocarbon substituent at one end and an alkoxy unit of varying length on the other end, were designed and successfully synthesized via atom transfer radical polymerization. For comparison, poly{butyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PC4Cm), similar to PF3Cm but with a butyl group instead of the fluorocarbon substituent, was also prepared. Differential scanning calorimetric results reveal that the glass transition temperatures (T_gs) of the two series of polymers decrease as m increases and T_gs of the fluorocarbon‐substituted polymers are higher than those of the corresponding butyl‐substituted polymers. Wide‐angle X‐ray diffraction measurements show that the mesophase structures of these polymers are dependent on the number of the carbon atoms in the fluorocarbon substituent and the property of the other terminal substituent. Polymers with fluorocarbon substituents enter into columnar nematic phases when m ≥ 4, whereas the polymer PF3C1 exhibits no liquid crystallinity. For polymers with butyl substituents, columnar nematic phases form when the number of carbon atoms at both ends of the side chain is not equal at high temperatures and disappear after the polymers are cooled to ambient temperature. However, when the polymer has the same number of carbon atoms at both ends of the side chain, a hexagonal columnar phase develops, and this phase remains after the polymer is cooled. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of liquid crystalline polysiloxanes containing benzyl ether mesogens

Side chain liquid crystalline polysiloxanes were synthesized by the hydrosilation of poly(methylhydrosiloxane) with p-(1-undecenyl-11-oxy) benzyl ethers of 4-cyanophenol (IM), 4-methoxyphenol (IIM), 4-cyano-4′-hydroxybiphenyl (IIIM), 4-methoxy-4′-hydroxybiphenyl (IVM), and 2-cyano-6-hydroxynaphthalene (VM). The phase behavior of both monomeric and polymeric liquid crystals was characterized by differential scanning calorimetry and optical polarization microscopy. IM is a monotropic liquid crystal, IIM is crystalline, and IIIM and IVM are enantiotropic liquid crystals, whereas VM presents two virtual liquid crystalline transitions and crystalline polymorphism. All the synthesized polysiloxanes present enantiotropic smectic mesomorphism.     

Hydrophobic interactions in the enantioselective solvolyses of optically active activated esters by imidazole-containing polymeric surfactants

Enantioselective solvolyses of optically active activated esters in the aggregate system of optically active polymeric surfactants containing imidazole and benzene moieties were performed. The catalyst polymers [copoly(MHis-DEVAB)] employed were copolymers of N-methacryloyl-L -histidine methyl ester (MHis) with N,N-dimethyl-N-hexadecyl-N-[10-(p-vinylcarboxanilido) decyl]ammonium bromide(DEVAB). In the solvolyses of N-carbobenzoxy-D - and L -phenylalanine p-nitrophenyl esters (D -NBP and L -NBP) by polymeric catalysts, copoly(MHis-DEVAB) exhibited not only increased catalytic activity but also enhanced enantioselectivity as the mole percent of surfactant monomers in the copolymers increased. The polymeric catalysts showed noticeable enantioselective solvolyses toward D - and L -NBP of the substrates employed. As the reaction temperature was lowered for the solvolyses of D - and L -NBP with the catalyst polymer containing 4.8 mol% of MHis, an increased reaction rate and enhanced enantioselectivity were observed. The coaggregate systems of the polymer and monomeric surfactants were also investigated. The case of a coaggregate system consisting of 70 mol% of cetyldimethylethylammonium bromide with polymeric catalyst showed maximum enantioselective catalysis, viz., k_cat (L )/k_cat(D ) = 6.68. The catalyst polymers in the sonicated solvolytic solutions were confirmed to form large ordered aggregate structure by electron microscopic observation. From these results, it is concluded that hydrophobic interaction in ordered aggregate structure plays an important role in enantioselective catalysis of optically active imidazole-containing polymers.     

Thermotropic behavior of poly(oxyethylene) cholesterol ethers

The thermotropic behavior of poly(oxyethylene) cholesterol ether surfactants was studied by differential scanning calorimetry and small-angle X-ray scattering. Contrary to what is usually observed in conventional poly(oxyethylene)-type surfactant systems, poly(oxyethylene) cholesterol ether surfactants show a change of the fusion mechanism as the chain length is varied. For long chain lengths (n > or = 15) the usual solid-liquid transition is found, but for short chain lengths (n < or = 10) the transition goes through a birefringent lamellar phase. The appearance of this liquid crystal (LC) phase seems to be related with the predominance of the cholesterol part in the short chain polyoxyethylene surfactants. On the contrary, for long polyexyethylene chains the polymer gains in importance and only a solid crystalline structure is observed at low temperatures. An antiparallel packing structure with totally overlapped chains is found for both, the solid and the LC phase. The chains seem to be in a zigzag configuration, and only for the longest surfactant here studied (n = 30) a change of the chain configuration to a much shorter meander configuration is observed.     

Phase behavior in mixtures of cationic and anionic surfactants in aqueous solutions

Phase behavior of cationic/anionic surfactant mixtures of the same chain length (n=10, 12 or 14) strongly depends on the molar ratio and actual concentration of the surfactants. Precipitation of catanionic surfactant and mixed micelles formation are observed over the concentration range investigated. Coacervate and liquid crystals are found to coexist in the transition region from crystalline catanionic surfactant to mixed micelles.The addition of oppositely charged surfactant diminishes the surface charge density at the mixed micelle/solution interface and enhances the apparent degree of counterion dissociation from mixed micelles. Cationic surfactants have a greater tendency to be incorporated in mixed micelles than anionic ones.