Analysis of low molecular weight compounds using MALDI‐ and LDI‐TOF‐MS: Direct detection of active pharmaceutical ingredients in different formulations

Matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) is a high throughput, easy to use analytical technique. The simple sample preparation of this technique and its tolerance to the presence of contaminants are among its advantages. In contrast, depending on the matrix used, MALDI can ionize and generates ions in the low m /z range that complicate the interpretation of the spectra of low molecular weight compounds. To address this issue, one can envisage the use of tunable ionic matrices that can reduce the low m /z interferents. In this work, the ionic matrices triethylammonium α‐cyano‐4‐hydroxycinnamate and diisopropylammonium α‐cyano‐4‐hydroxycinnamate were used to directly analyze 14 pharmaceutical drugs in different formulations (coated tablets, noncoated tablets, capsules, and solutions). This methodology enabled the detection of their active compounds with minimum sample preparation, thus providing a straightforward approach for the forensic analysis of pharmaceutical drugs in the quest for detecting counterfeits. LDI‐MS experiments were also performed, and the active ingredient in all of the medicines analyzed were detected. However, MALDI‐MS spectra for the medicines analyzed herein showed less or no fragmentation than LDI‐MS, which makes the analysis easier.     

Synthesis and Electroluminescence of Metal 4‐Styryl‐8‐hydroxyquinolates

Aluminum and zinc complexes of 4‐substituted 8‐hydroxyquinoline were used effectively as emissive materials in light‐emitting diodes (LED). The substituents chosen in this study were p‐methoxy‐2‐styryl, p‐diethylamino‐2‐styryl, and naphthalene‐2‐vinyl groups. Their emission spectra were red‐shifted with respect to that of aluminum tris(hydroxylquinolate) (Alq₃) as a result of extending their π‐conjugation. All complexes formed amorphous glasses, which exhibited high thermal and electrical stability. Typical LED devices were fabricated by mixing the dyes with polyvinylcarbazole and spin‐coated to form thin films, which were sandwiched between ITO (indium tin oxide) and a metal electrode. These devices displayed yellow‐orange emissions with quantum efficiency ca. 0.4%.     

Specific Adhesion of 3T3‐L1 Fibroblast onto Uridine‐Containing Polystyrene

A hydrophobic 96‐well multiplate was incubated with aqueous poly(uridine 5′‐p‐styrenesulfonate) (PUSS). Analysis of the PUSS‐coated surface indicated that the surface incubated at higher polymer concentration (50 mg·mL^–1) was hydrophilic while the surface incubated at lower polymer concentration (1 mg·mL^–1) was hydrophobic. Adhesion of 3T3‐L1, which has GalTase on the cell membrane, on the hydrophobic PUSS‐coated surface was greater than on the non‐coated surface. 3T3‐L1 adhesion on the hydrophilic PUSS‐coated surface was even greater. On the other hand, the adhesion of HeLa cells, which did not show GalTase on the cell membrane, on the hydrophilic surface was quite weak. It may well be said that the 3T3‐L1 adhesion on the hydrophilic PUSS‐coated surface was GalTase‐mediated.     

Small molecule self‐assembly in polymer matrices

Using small molecules in polymer matrices is common in applications such as (i) plasticizing polymers to modify the glass transition and mechanical properties and (ii) dispersion of photoactive or electroactive small molecules in polymer matrices in organic‐electronic devices Aggregation of these small molecules and phase separation leading to crystallization often cannot be morphologically controlled. If these are designed with self‐assembling codes such as hydrogen bonding or aromatic interactions, their phase separation behavior would be distinctly different. This review summarizes the studies on morphologies in such situations, such as (i) sub‐surface assembly in polymer matrices, (ii) controlled polymerization‐induced phase separation to create polymer blends, (iii) using the polymer to direct the assembly of small molecules in liquid crystalline devices, (iv) functionalizing a polymer with self‐assembling small molecules to cause organo‐gelation which the polymer itself would not by itself, and (v) using such systems as templates to create porous polymer structures. Organic–inorganic hybrids using polymers as templates for nanostructures and imprinted porous membranes is an emerging area. Since self‐assembly is one of the dominating area of research with respect to both small molecules, polymers as well as the combination of the two, this review summarizes the studies on the aforementioned topics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 451–478     

A single‐layer approach to electrochromic materials

This study is focused on the development of electrochromic (EC) materials that could be incorporated into electrically‐driven switchable devices such as electrochromogenic glasses. The ultimate goal of this research is to depart from the complexity of the EC device construction which is in use today. Such construction consists of three layers each of them incorporating a specific functionality: the electrochromophore, the electrolyte and the ion storage, assembled between two transparent or reflective electrodes. In most of these conventional devices the electrolyte layer is a liquid or a gel. Since solid‐state EC devices are of high commercial interest, we are exploring various avenues to reduce the number of layers to one layer that is all‐solid and electrochromically/electrolytically and ionically functional. The design strategy is based on the use of polymers such as poly(epichlorohydrin‐co‐ethylene oxide), poly(vinyl butyral) and poly(ethylene‐co‐methacrylic acid) ionomer, to which EC properties were introduced by grafting reactions with specifically synthesized carbazole derivatives. A combination of analytical techniques was used to characterize the monomers and the carbazole‐grafted polymers. A proof of concept was demonstrated for a single‐layer, all‐solid‐state EC device consisting of a film of poly(ECH‐co‐EO) containing pendent carbazole groups, assembled between two transparent electrodes, Sn‐doped In₂O₃ oxide‐coated glasses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and ring‐opening (co)polymerization of L‐lysine N‐carboxyanhydrides containing labile side‐chain protective groups

This contribution describes the synthesis and ring‐opening (co)polymerization of several L ‐lysine N‐carboxyanhydrides (NCAs) that contain labile protective groups at the ?‐NH₂ position. Four of the following L ‐lysine NCAs were investigated: N^?‐trifluoroacetyl‐L ‐lysine N‐carboxyanhydride, N^?‐(tert‐butoxycarbonyl)‐L ‐lysine N‐carboxyanhydride, N^?‐(9‐fluorenylmethoxycarbonyl)‐L ‐lysine N‐carboxyanhydride, and N^?‐(6‐nitroveratryloxycarbonyl)‐L ‐lysine N‐carboxyanhydride. In contrast to the harsh conditions that are required for acidolysis of benzyl carbamate moieties, which are usually used to protect the ?‐NH₂ position of L ‐lysine during NCA polymerization, the protective groups of the L ‐lysine NCAs presented here can be removed under mildly acidic or basic conditions or by photolysis. As a consequence, these monomers may allow access to novel peptide hybrid materials that cannot be prepared from ?‐benzyloxycarbonyl‐L ‐lysine N‐carboxyanhydride (Z‐Lys NCA) because of side reactions that accompany the removal of the Z groups. By copolymerization of these L ‐lysine NCAs with labile protective groups, either with each other or with γ‐benzyl‐L ‐glutamate N‐carboxyanhydride or Z‐Lys NCA, orthogonally side‐chain‐protected copolypeptides with number‐average degrees of polymerization ≤20 were obtained. Such copolypeptides, which contain different side‐chain protective groups that can be removed independently, are interesting for the synthesis of complex polypeptide architectures or can be used as scaffolds for the preparation of synthetic antigens or protein mimetics. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1167–1187, 2003     

Synthesis and antibacterial activity of surface‐coated catechol‐conjugated polymer with silver nanoparticles on versatile substrate

In the present study, 2‐chloro‐3′,4′‐dihydroxyacetophenone (CCDP), a catechol derivative, was quaternized with poly(propylene oxide)‐g‐poly(dimethylaminoethyl methacrylate) (PPO‐g‐PDMA, PgP) to prepare surface coatings for various substrates. The surfaces of noble metals, oxides, and synthetic polymers were coated by immersion in an aqueous solution of CCDP quaternized with PgP (C‐PgP). The catechol functional groups that remained on the surface were used for deposition of Ag nanoparticles (AgNPs) on the coated surface, to provide a water‐resistant antibacterial polymer with long‐term antimicrobial activity. X‐ray photoelectron spectroscopy confirmed deposition of C‐PgP and AgNPs on the surface coated with the antibacterial polymer. Surface‐immobilized C‐PgP/AgNPs showed outstanding antibacterial activities against Staphylococcus aureus, a Gram‐positive bacterium, and Escherichia coli, a Gram‐negative bacterium. C‐PgP/AgNPs can be applied to a variety of substrates and can therefore be used as antibacterial materials in various fields. Copyright © 2016 John Wiley & Sons, Ltd.     

Combining bar adsorptive microextraction with capillary electrophoresis—Application for the determination of phenolic acids in food matrices

In this contribution, bar adsorptive microextraction coated with a mixed‐mode anion exchange/RP followed by liquid desorption was combined for the first time with a capillary electrophoresis‐diode array detection system (BAμE(MAX)‐LD/CE‐DAD), for the determination of phenolic acids in food matrices, using chlorogenic, ferulic, cumaric, and caffeic acids as model compounds. Assays performed in aqueous media spiked at the 0.8 mg/L level yielded average recoveries up to 40% for all four phenolic acids, under optimized experimental conditions. The analytical performance showed also good precision (RSD < 15%), convenient LODs (18.0–85.0 μg/L) and linear dynamic ranges (0.8–8.0 mg/L) with convenient determination coefficients (r² > 0.9900). By using the standard addition method, the application to food matrices such as green tea, red fruit juice, and honey allowed very good performances for the determination of minor amounts of phenolic acids. The proposed methodology proved to be a suitable alternative for the analysis of polar to ionic compounds, showing to be easy to implement, reliable, sensitive, and requiring a low sample volume to determine phenolic acids in food samples.     

Synthesis and characterization of hydrophilic polyester‐PEO networks with shape‐memory properties

Shape‐memory polyester‐polyethylene oxide networks are synthesized through photopolymerization of hydrophobic poly[(D,L‐lactide)‐co‐glycolide]tetraacrylate (PLGATA) and hydrophilic poly(ethylene glycol) dimethacrylate (PEGDMA). The materials can recover their original shape either quickly by heating stimulus or slowly upon immersion in water. The wettability, mechanical properties, and transition temperature of the polymer networks could be conveniently adjusted by variation of the compositions of PLGATA and PEGDMA. The hydrophilicity of PEGDMA could prospectively improve blood compatibility of polymer networks. They offer a high potential for biomedical applications such as smart implants, drug delivery systems, or medical devices. Copyright © 2010 John Wiley & Sons, Ltd.     

A comparative study of fluorine substituents for enhanced stability of flexible and ITO‐free high‐performance polymer solar cells

Two low‐band gap polymer series based on benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and dithienylbenzothiadiazole, with different numbers of fluorine substituents on the 2,3,1‐benzothiadiazole unit, have been synthesized and explored in a comparative study of the photochemical stability and operational lifetime in flexible large area roll‐coated bulk heterojunction solar cells. The two polymer series have different side chains on the BDT unit, namely 2‐hexyldecyloxy (BDT_HDO) ( P1–P3 ) or 2‐hexyldecylthiophene (BDT_THD) ( P4–P6 ). The photochemical stability clearly shows that the stability enhances along with the number of fluorine atoms incorporated on the polymer backbone. Fabrication of the polymer solar cells based on the materials was carried out in ambient atmosphere on a roll coating/printing machine employing flexible and indium‐tin‐oxide‐free plastic substrates. Solar cells based on the P4–P6 series showed the best performance, reaching efficiencies up to 3.8% for an active area of 1 cm², due to an enhanced current compared to P1–P3 . Lifetime measurements, carried out according to international summit on OPV stability (ISOS), of encapsulated devices reveals an initial fast decay for P1–P6 in the performance followed by a much slower decay rate, still retaining 40–55% of their initial performance after 250 h of testing under ISOS‐L‐1 conditions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 893–899     

Thieno[3,4‐c]pyrrole‐4,6‐dione‐3,4‐difluorothiophene Polymer Acceptors for Efficient All‐Polymer Bulk Heterojunction Solar Cells

Branched‐alkyl‐substituted poly(thieno[3,4‐c]pyrrole‐4,6‐dione‐alt‐3,4‐difluorothiophene) (PTPD[2F]T) can be used as a polymer acceptor in bulk heterojunction (BHJ) solar cells with a low‐band‐gap polymer donor (PCE10) commonly used with fullerenes. The “all‐polymer” BHJ devices made with PTPD[2F]T achieve efficiencies of up to 4.4 %. While, to date, most efficient polymer acceptors are based on perylenediimide or naphthalenediimide motifs, our study of PTPD[2F]T polymers shows that linear, all‐thiophene systems with adequately substituted main chains can also be conducive to efficient BHJ solar cells with polymer donors.     

Facile fabrication of hybrid nanoparticles surface grafted with multi‐responsive polymer brushes via block copolymer micellization and self‐catalyzed core gelation

Poly(2‐(dimethylamino)ethyl methacrylate)‐b‐poly(γ‐methacryloxypropyl‐trimethoxysilane) (PDMA‐b‐PMPS) was synthesized via consecutive reversible addition‐fragmentation chain transfer (RAFT) polymerizations in 1,4‐dioxane. Subsequent micellization of the obtained amphiphilic diblock polymer in aqueous solution led to the formation of nanoparticles consisting of hydrophobic PMPS cores and well‐solvated PDMA shells. Containing tertiary amine residues, PDMA blocks in micelle coronas can spontaneously catalyze the sol–gel reactions of trimethoxysilyl groups within PMPS cores, leading to the formation of hybrid nanoparticles coated with PDMA brushes. Transmission electron microscopy (TEM) and laser light scattering (LLS) revealed the presence of monodisperse spherical hybrid nanoparticles, and the grafting density of PDMA chains at the surface of nanoparticle cores was estimated to be ～5.8 nm²/chain. PDMA brushes exhibit dual stimuli‐responsiveness, and the swelling/collapse of them can be finely tuned with solution pH and temperatures. The obtained multi‐responsive hybrid nanoparticles might find potential applications in fields such as smart devices, recyclable catalysts, and intelligent nanocarriers for drug delivery or gene transfection. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2379–2389, 2008     

Preparation and characterization of temperature‐ and pH‐responsive diblock copolymers and their silica‐coated nanoparticles

Multiresponsive amphiphilic poly(N,N‐dimethylaminoethyl methacrylate)‐b‐poly(N‐isopropylacrylamide) (PDMAEMA‐b‐PNIPAM) was successfully synthesized by reversible addition‐fragmentation chain transfer polymerization. Poly(N,N‐dimethylaminoethyl methacrylate)‐b‐poly(N‐isopropylacrylamide) has thermal and pH stimuli responsiveness. Their lower critical solution temperature and hydrodynamic radius can be adjusted by varying the copolymer composition, block length, solution pH, and temperature. In addition, a convenient method has been established to prepare cross‐linked silica‐coated nanoparticles with PDMAEMA‐b‐PNIPAM micelles as a template, resulting in good organic/inorganic hybrid nanoparticles defined as 175 to 220 nm. The structure and morphology were characterized by proton nuclear magnetic resonance (₁HNMR), Fourier‐transform infrared spectroscopy (FT‐IR), transmission electron microscopy (TEM), and transmission electron microscopy‐energy dispersive X‐ray spectroscopy (TEM‐EDS).     

Carbazole Dendrimers as Solution‐Processable Thermally Activated Delayed‐Fluorescence Materials

Recently, thermally activated delayed fluorescence (TADF) materials have received increasing attention as effective emitters for organic light‐emitting diodes (OLEDs). However, most of them are usually employed as dopants in a host material. In this report, carbazole dendrimers with a triphenyl‐s‐triazine core are reported, which are the first solution‐processable, non‐doped, high‐molecular‐weight TADF materials. The dendrimers were obtained by a new and facile synthetic route using the tert‐butyldimethylsilyl moiety as a protecting group. All dendrimers showed TADF in toluene. Measurements of the temperature‐dependent luminescence lifetime revealed that spin‐coated neat films also showed TADF with moderate quantum yields. OLED devices incorporating these dendrimers as spin‐coated emitting layers gave external quantum efficiencies of up to a 3.4 %, which suggests that this device is harvesting triplet excitons. This result indicates that carbazole dendrimers with attached acceptors are potential TADF materials owing to their polarized electronic structure (with HOMO–LUMO separation).     

Polyion Detection via All‐solid‐contact Paper‐based Polyion‐sensitive Polymeric Membrane Electrodes

The first all‐solid‐contact paper‐based single‐use polyion‐sensitive ion‐selective electrodes (ISEs) are described. These polyion‐sensitive ISEs are fabricated using cellulose filter paper coated with a carbon ink conductive layer. A polyanion sensing membrane is cast on a section of the coated paper and the sensor is insulated, resulting in a disposable, single‐use device. Various polyanions are shown to yield large negative potentiometric responses when using these disposable devices for direct polyanion detection. These new sensors are further demonstrated to be useful in indirect polycation detection when polycations (i. e., polyquaterniums (PQs)) are titrated with polyanionic dextran sulfate (DS). Titrations monitored using these paper‐based, all‐solid‐contact devices yield endpoints proportional to the given PQ concentration present in the test sample.     

Synthesis,Characterization, and Physical Properties of a Conjugated Heteroacene: 2‐Methyl‐1,4,6,7,8,9‐hexaphenylbenz(g)isoquinolin‐3(2H)‐one (BIQ)

We report the synthesis and characterization of a novel, stable and blue heteroacene, 2‐methyl‐1,4,6,7,8,9‐hexaphenylbenz(g)isoquinolin‐3(2H)‐one (BIQ 3 ). BIQ 3 , with its relatively small π framework, has an absorption λ_max at 620 nm, which is larger than that of pentacene (λ_max=582 nm), but BIQ 3 is more stable. The solutions of BIQ 3 are observed without any noticeable photobleaching on the order of days. In the solid state, it is very stable at ambient conditions and can be stored indefinitely. Owing to its pyridone end unit, BIQ 3 can display different resonance structures in different solvents (aprotic and protic) or Lewis acids to give different colors. The attractive stability exhibited by BIQ 3 is very desirable in organic semiconductor devices. Herein, we investigated a simple heterojunction photovoltaic device based on BIQ 3 as an electron donor and [6,6]‐phenyl‐C₆₁ butyric methyl ester as an electron acceptor. Our results show that this type of heteroacene could be a good candidate as a charge‐transport material in organic semiconductor devices.     

Voltammetric Studies of Cadmium‐ and Zinc‐Containing Metallothioneins at Nafion‐Coated Mercury Thin Film Electrodes

Voltammetric studies of rabbit liver metallothioneins (MTs, containing both Zn and Cd ions) and Zn₇‐MT were carried out at Nafion‐coated mercury film electrodes (NCMFEs). The accumulation of MT molecules into the NCMFEs enhances the voltammetric signals and the electrostatic interaction between the Nafion membrane and MT facilitates facile electron transfer reactions. Two well‐defined redox waves, with reduction potential (E_pc) values at ?0.740 and ?1.173 V, respectively, were observed. The peak at E_pc =?0.740 V is attributable to the reduction of the Cd‐MT complex, whereas that at E_pc=?1.173 V was assigned to the reduction of the Zn‐MT complex. Zn₇‐MT exhibits only one redox wave with E_pc=?1.198 V. The NCMFE was found to be more advantageous than thin mercury film electrode (MFE), because the pristine metal ions in MTs (e.g., Cd²⁺ and/or Zn²⁺) are not significantly replaced by Hg²⁺. The NCMFE is also complementary to Nafion‐coated bismuth film electrode in that it has a greater hydrogen overpotential, which allows the reduction of the Zn‐MT complex to be clearly observed. Moreover, intermetallic compound formation between Cd and Zn appears to be less serious at NCMFEs. Consequently, the amounts of Cd and Zn deposited into the electrode upon the reduction reactions can be quantified more accurately.     

Poly(γ‐benzyl‐L‐glutamate)‐functionalized single‐walled carbon nanotubes from surface‐initiated ring‐opening polymerizations of N‐carboxylanhydride

Single‐walled carbon nanotubes (SWCNTs) have been functionalized with poly(γ‐benzyl‐L ‐glutamate) (PBLG) by ring‐opening polymerizations of γ‐benzyl‐L ‐glutamic acid‐based N‐carboxylanhydrides (NCA‐BLG) using amino‐functionalized SWCNTs (SWCNT‐NH₂) as initiators. The SWCNT functionalization has been verified by FTIR spectroscopy and transmission electron microscopy. The FTIR study reveals that surface‐attached PBLGs adopt random‐coil conformations in contrast to the physically absorbed or bulk PBLGs, which exhibit α‐helical conformations. Raman spectroscopic analysis reveals a significant alteration of the electronic structure of SWCNTs as a result of PBLG functionalization. The PBLG‐functionalized SWCNTs (SWCNT‐PBLG) exhibit enhanced solubility in DMF. Stable DMF solutions of SWCNT‐PBLG/PBLG with a maximum SWCNTs concentration of 259 mg L^?1 can be readily obtained. SWCNT‐PBLG/PBLG solid composites have been characterized by differential scanning calorimetry, thermogravimetric analysis, wide/small‐angle X‐ray scattering (W/SAXS), scanning electron microscopy, and polarized optical microscopy for their thermal or morphological properties. Microfibers containing SWCNT‐PBLG and PBLG can also be prepared via electrospinning. WAXS characterization reveals that SWCNTs are evenly distributed among PBLG rods in solution and in the solid state where PBLGs form a short‐range nematic phase interspersed with amorphous domains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2340–2350, 2010     

Chemie freier cyclischer vicinaler Tricarbonyl‐Verbindungen (‘1,2,3‐Trione') Teil 2. Redox‐Reaktionen von 1,2,3‐Trionen mit En‐1,2‐diolen (‘Reduktonen'), 2‐Alkoxy‐en‐1‐olen,En‐1,2‐diaminen und verwandten Spezies

Chemistry of Free Cyclic Vicinal Tricarbonyl Compounds (‘1,2,3‐Triones'). Part 2. Redox Reactions of 1,2,3‐Triones with Ene‐1,2‐diols (‘Reductones'), 2‐Alkoxy‐en‐1‐ols, Ene‐1,2‐diamines, and Related Species . Midstanding carbonyl groups of cyclic 1,2,3‐triones 4 possess outstanding electrophilic (electron‐pair accepting) as well as oxidizing (one‐electron accepting) properties. Their reactions with selected electron‐rich CC bonds as efficient nucleophiles (A_N reactions) and as efficient reducing agents (SET (single electron transfer) reactions) are studied. In a few cases, short‐lived charge‐transfer colors could be observed. Particularly, free didehydro‐5,6‐O‐isopropyliden‐L ‐ascorbic acid ( 4g ), its O,C‐adduct 8g to 5,6‐O‐isopropylidene‐L ‐ascorbic acid ( 1g ), and – via an independent pathway – the ostensible C,C‐dimer 10a of mono‐dehydrodimedone reductone were prepared. Intermediate radical anions 4 ^.− can be considered to be ideal representatives of dicapto‐dative radicals. Novel large‐scale syntheses of 3,4‐dihydroxyfuran‐2(5H)‐one ( 1e ) and of its vicinal trione 4e are presented.     

Controlled surface‐initiated ring‐opening polymerization of L‐lactide from risedronate‐anchored hydroxyapatite nanocrystals: Novel synthesis of biodegradable hydroxyapatite/poly(L‐lactide) nanocomposites

Risedronate‐anchored hydroxyapatite (HA‐RIS) nanocrystals were prepared with 4.1 wt % RIS and used for controlled surface‐initiated ring‐opening polymerization (ROP) of L ‐lactide (L ‐LA). The strong adsorption of RIS to HA surface not only led to enhanced dispersion of HA nanocrystals in water as well as in organic solvents but also provided alkanol groups as active initiating species for ROP of L ‐LA. HA‐RIS was characterized by thermogravimetric analysis, dynamic light scattering, ¹H NMR, Fourier transform infrared spectrometer, and X‐ray diffraction. The graft polymerization of L ‐LA onto HA‐RIS took place smoothly in the presence of stannous octoate in toluene at 120 °C, resulting in HA/poly(L ‐LA) nanocomposites with high yields of 85–90% and high poly(L ‐LA) contents of up to 97.5 wt %. Notably, differential scanning calorimetry measurements revealed that the poly(L ‐LA) in HA/poly(L ‐LA) nanocomposites exhibited considerably higher melting temperatures (T_m = 173.3?178.1 °C) and higher degrees of crystallinity (X_c = 41.0?43.1%) as compared to poly(L ‐LA) homopolymer (T_m = 168.5 °C, X_c =25.7%). In addition, our initial results showed that these HA/poly(L ‐LA) nanocomposites could readily be electrospun into porous matrices. This study presented a novel and controlled synthetic strategy to HA/RIS/poly(L ‐LA) nanocomposites that are promising for orthopedic applications as well as for bone tissue engineering. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011