Spectroscopic and Kinetic Evidence for the Crucial Role of Compound 0 in the P450cam‐Catalyzed Hydroxylation of Camphor by Hydrogen Peroxide

The hydroperoxo iron(III) intermediate P450_camFe^III–OOH, being the true Compound 0 (Cpd 0) involved in the natural catalytic cycle of P450_cam, could be transiently observed in the peroxo‐shunt oxidation of the substrate‐free enzyme by hydrogen peroxide under mild basic conditions and low temperature. The prolonged lifetime of Cpd 0 enabled us to kinetically examine the formation and reactivity of P450_camFe^III–OOH species as a function of varying reaction conditions, such as pH, and concentration of H₂O₂, camphor, and potassium ions. The mechanism of hydrogen peroxide binding to the substrate‐free form of P450_cam differs completely from that observed for other heme proteins possessing the distal histidine as a general acid–base catalyst and is mainly governed by the ability of H₂O₂ to undergo deprotonation at the hydroxo ligand coordinated to the iron(III) center under conditions of pH≥p${K{{{\rm P450}\hfill \atop {\rm a}\hfill}}}$ . Notably, no spectroscopic evidence for the formation of either Cpd I or Cpd II as products of heterolytic or homolytic O?O bond cleavage, respectively, in Cpd 0 could be observed under the selected reaction conditions. The kinetic data obtained from the reactivity studies involving (1R)‐camphor, provide, for the first time, experimental evidence for the catalytic activity of the P450Fe^III–OOH intermediate in the oxidation of the natural substrate of P450_cam.     

Axial Ligand and Spin‐State Influence on the Formation and Reactivity of Hydroperoxo–Iron(III) Porphyrin Complexes

The present study focuses on the formation and reactivity of hydroperoxo–iron(III) porphyrin complexes formed in the [Fe^III(tpfpp)X]/H₂O₂/HOO^? system (TPFPP=5,10,15,20‐tetrakis(pentafluorophenyl)‐21H,23H‐porphyrin; X=Cl^? or CF₃SO₃^?) in acetonitrile under basic conditions at ?15 °C. Depending on the selected reaction conditions and the active form of the catalyst, the formation of high‐spin [Fe^III(tpfpp)(OOH)] and low‐spin [Fe^III(tpfpp)(OH)(OOH)] could be observed with the application of a low‐temperature rapid‐scan UV/Vis spectroscopic technique. Axial ligation and the spin state of the iron(III) center control the mode of O? O bond cleavage in the corresponding hydroperoxo porphyrin species. A mechanistic changeover from homo‐ to heterolytic O? O bond cleavage is observed for high‐ [Fe^III(tpfpp)(OOH)] and low‐spin [Fe^III(tpfpp)(OH)(OOH)] complexes, respectively. In contrast to other iron(III) hydroperoxo complexes with electron‐rich porphyrin ligands, electron‐deficient [Fe^III(tpfpp)(OH)(OOH)] was stable under relatively mild conditions and could therefore be investigated directly in the oxygenation reactions of selected organic substrates. The very low reactivity of [Fe^III(tpfpp)(OH)(OOH)] towards organic substrates implied that the ferric hydroperoxo intermediate must be a very sluggish oxidant compared with the iron(IV)–oxo porphyrin π‐cation radical intermediate in the catalytic oxygenation reactions of cytochrome P450.     

Effect of iron salt on the color removal of water containing the azo-dye reactive blue 69 using photo-assisted Fe(II)/H2O2 and Fe(III)/H2O2 systems

The effect of chloride, sulfate and nitrate anions on the color removal of water containing the azo-dye reactive blue 69 (RB69) in acidic solution, by using photo-assisted Fenton process with Fe(II)/H₂O₂ and Fe(III)/H₂O₂ systems was investigated. Experiments were conducted in a batch reactor irradiated during 5 h with a domestic 15 W lamp with emission in the visible spectra. Experimental results showed color disappearance in the first 5 min of reaction in the photo-assisted process for all of the different salts, greatly enhancing the reaction rate with respect to the corresponding systems under dark conditions. The exception of the general trend was the Fe₂(SO₄)₃/H₂O₂/UV system, where the decolorization process is slower probably because the oxidative species generated by rupture of Fe(III)–peroxo complexes are less reactive. Total organic matter depletion and mineralization of the effluent were also tested during the experimental runs by means of total organic carbon (TOC) showing that, for most of the photo-assisted experiments high mineralization was reached after 3 h of reaction.     

Theoretical modeling of the mechanism of aniline oxidation by singlet O<Subscript>2</Subscript>

The mechanism of aniline oxidation by singlet oxygen was studied by the DFT-PBE/L2 method. According to the calculations, aniline endoperoxide cannot participate in the reaction because of its energy instability. The addition of ¹O₂ to aniline proceeds with the simultaneous proton transfer to the oxygen molecule from the NH₂ group (for the syn-approach of oxygen) or from the aromatic ring (for the anti-approach). For the syn-approach of the ¹O₂ molecule, the HNC₆H₄(H)OOH intermediate is formed, whose decomposition leads to aniline p-hydroperoxide (predominantly) or p-iminoquinone. In the case of the anti-approach, the ¹O₂ molecule is inserted at the C–H bond to form aniline p-hydroperoxide (H₂NC₆H₄OOH). The decomposition of aniline p-hydroperoxide with the formation of p-aminophenol and H₂O₂ molecule proceeds via concerted mechanism.     

Synthesis,Characterization, and Reactivity of Cobalt(III)–Oxygen Complexes Bearing a Macrocyclic N‐Tetramethylated Cyclam Ligand

Mononuclear metal–dioxygen species are key intermediates that are frequently observed in the catalytic cycles of dioxygen activation by metalloenzymes and their biomimetic compounds. In this work, a side‐on cobalt(III)–peroxo complex bearing a macrocyclic N‐tetramethylated cyclam (TMC) ligand, [Co^III(15‐TMC)(O₂)]⁺, was synthesized and characterized with various spectroscopic methods. Upon protonation, this cobalt(III)–peroxo complex was cleanly converted into an end‐on cobalt(III)–hydroperoxo complex, [Co^III(15‐TMC)(OOH)]²⁺. The cobalt(III)–hydroperoxo complex was further converted to [Co^III(15‐TMC‐CH₂‐O)]²⁺ by hydroxylation of a methyl group of the 15‐TMC ligand. Kinetic studies and ¹⁸O‐labeling experiments proposed that the aliphatic hydroxylation occurred via a Co^IV–oxo (or Co^III–oxyl) species, which was formed by O? O bond homolysis of the cobalt(III)–hydroperoxo complex. In conclusion, we have shown the synthesis, structural and spectroscopic characterization, and reactivities of mononuclear cobalt complexes with peroxo, hydroperoxo, and oxo ligands.     

Iron Hydroxides—New Catalysts for Oxidation Reactions in Aqueous Solutions

The catalytic decomposition of H₂O₂ in the presence of SiO₂-supported amorphous and colloidal FeO(OH) is studied. An inactive Fe(IV) compound and a Fe(III) peroxo complex are found in the hydroxide composition. Possible mechanisms are discussed for H₂O₂ decomposition involving no free radicals. It is shown that lower hydrocarbons are oxidized in the systems, and their presence changes both the kinetics of H₂O₂ decomposition and the behavior of Fe(IV) and the peroxo complex.     

Effects of humidity and temperature on laser-assisted dip-pen nanolithography array using molecular dynamics simulations

Reactions of As(III) and As(V) with pyrite were investigated using pristine pyrite (produced and reacted in a rigorously anoxic environment with P_O2 < 10⁻⁸ atm) and using surface-oxidized pyrite (produced under anoxic conditions, exposed to air, then stored and reacted under rigorously anoxic conditions). Results with surface-oxidized pyrite were similar to previously reported arsenic-pyrite results. However As(III) adsorbed over a broader pH range on pristine pyrite than on surface-oxidized pyrite, As(V) adsorbed over a narrower pH range on pristine pyrite than on surface-oxidized pyrite, and adsorbed As(V) on pristine pyrite was reduced to As(III) but adsorbed As(V) was not reduced with surface-oxidized pyrite. Reduction of As(V) with pristine pyrite was first-order in total As(V), Fe(II) was released, and sulfur was oxidized. The proposed mechanism for pyrite oxidation by As(V) was similar to the published mechanism for oxidation by O₂ and rates were compared. The results can be used to predict the removals of As(V) and As(III) on pyrite in continuously anoxic environments or on pyrite in intermittently oxic/anoxic environments. Rigorous cleanup and continuous maintenance of strictly anoxic conditions are required if commercial or produced pyrites are to be used as surrogates for pristine pyrite.     

Treatment of ferric sulfate waste solutions for the production of ammonium ferric sulfate dodecahydrate

The process of precipitation of ammonium ferric sulfate dodecahydrate (NH₄Fe(SO₄)₂·12H₂O) from waste solutions, obtained during autoclave oxidation of pyrite concentrate has been studied. A special feature of these solutions is the high concentration of Fe(III) ions (>60 g L^–1) and sulfuric acid (> 61 g L^–1). Based on comprehensive laboratory tests, the study determined the optimal conditions for the precipitation process of ammonium ferric sulfate dodecahydrate (AFS) by salting out with ammonium sulfate: reagent excess (100% over stoichiometric, temperature 276 K, time 1 h). The process should be conducted under continuous slow stirring which would not allow forming of large crystals that are difficult to remove from the reactor. The test work confirmed that high quality crystals can be produced by prior oxidation of Fe(II) to Fe(III) ions using hydrogen peroxide and copper removal from the solution.     

Reactivity of the Peroxo Complexes of Copper(II) Hydroxide

In the interaction with H₂O₂ in an alkaline medium, Cu(OH)₂ forms terminal Cu–OOH and bridging peroxo complexes with the -1,1 and -²:² structures. It was found that the terminal peroxide is active in the reactions of H₂O₂ decomposition, diphenol oxidation, and nitrile conversion into acid amides. The promoting effect of ammonia on these reactions was found. A possible mechanism is discussed.     

Oxidative decomposition of oxalate ion with ozone in aqueous solution

The oxidation of oxalate ions with ozone in aqueous solution has been studied, and the effects of pH, temperature, and reactant concentrations on the reaction rate and efficiency have been estimated. The oxidative decomposition is most effective in alkaline medium (pH ≥ 10) at 50°C. Under these conditions, the consumption of ozone is 0.6±0.1 g per gram of oxalate or 1.1±0.1 mol per mole of oxalate, which corresponds to the stoichiometry (COO^–)₂ + O₃ + H₂O → 2CO₃^2– + O₂ + 2H⁺.     

Peroxo and alkylperoxidic molybdenum(VI) complexes as intermediates in the epoxidation of olefins by alkyl hydroperoxides

Novel oxoperoxomolybdenum(VI) complexes with the general formula MoO(O₂)L₂X₂ (III, L = DMF, HMPT) and MoO(O₂)Cl(ON)L(IV, ON) = pyridin-2-carboxylate (Pic), 8-hydroxyquinolinate (Quin) were prepared from the reaction of Ph₃COOH or H₂O₂ with the corresponding cis-dioxo complexes. In the reaction with Ph₃COOH both oxygen atoms of the peroxo moiety were found, by ¹⁸O labeling experiments, to come from the hydroperoxide. The X-ray crystal structure of MoO(O₂)Cl(Pic)(HMPT) revealed a bipyramidal pentagonal surounding with a rather short OO distance (1.41 Å). Complexes III were found to be more reactive than MoO(O₂)₂,HMPT for the epoxidation of olefins (oxidative cleavage products are consecutively formed) but react by the same cyclic peroxymetalation mechanism. The absence of reaction in the case of complexes IV illustrates the necessity for the metal to possess an equatorial releasable coordination site adjacent to the peroxo group for the oxygen transfer to occur. Catalytic oxidation of olefins using Ph₃COOH gave a selectivity in oxygenated products very different from that using t-BuOOH, and ¹⁸O labeling studies showed that alkyl-peroxidic rather than peroxo species are intermediates in this latter reaction. The mechanism of epoxidation of olefins by alkyl hydroperoxides catalyzed by d⁰ metal complexes is discussed.     

Kinetics of the borate anion catalyzed oxidation of diethyl sulfide with hydrogen peroxide in an <Emphasis Type="Italic">i</Emphasis>-PrOH–H<Subscript>2</Subscript>O medium

It was found that in a wide range of pH in the presence of boric acid the oxidation of diethyl sulfide (Et₂S) with hydrogen peroxide in an i-PrOH–H₂O medium occurs with the participation of H₂O₂, HOO^–, monoperoxo-(B(OH)₃OOH^–), and diperoxoborates (B(OH)₂(OOH)₂⁻). The stability constants of peroxoborates and the rate constants for the reactions of H₂O₂, HOO⁻, B(OH)₃(OOH)₂⁻, and B(OH)₂(OOH)₂⁻ with Et₂S under these conditions were determined.     

Catalytic oxidative carboncarbon bond cleavage of ketones with dioxygen: assessment of some metal complexes. Some alternatives for preparing α, ω-dicarboxylic acids

This account considers the catalytic oxidative cleavage of ketones with dioxygen. It can be brought about by Keggin-type heteropolyanion complexes containing molybdenum and vanadium as well as by several transition metal catalysts (V(IV, V), Cu(I, II), Fe(III), Ce(IV), etc.), instead of using stoichiometric oxidation with periodate, lead tetra-acetate, etc. Benzylic ketones, ArCH₂C(O)R are oxidised to ArCHO and the corresponding carboxylic acid in high yield at room temperature by dioxygen in the presence of Cu(II) or heteropolyacids H_3+n[PMo_12−nV_nO₄₀]_aq. Although some oxovanadium complexes will induce such oxidations, the heteropolyacids are better, probably due in part to their Brønsted acidity and ability to take part in a variety of equilibria. Treatment of substituted cycloalkanones with a catalytic amount of ‘H₅[PMo₁₀V₂O₄₀]·n H₂O’ (or Cu(II) complexes) under an O₂ atmosphere gives keto-acids in good yield. The selectivities observed at high conversions with various ketones and diols, coupled with the mild conditions and inexpensive oxidant, would seem to make these methods attractive for use in fine chemical manufacture. The scope of these complexes as selective oxidation catalysts can be further extended by associating several metal ions. Such catalysts are being developed for organic synthesis at both the laboratory and industrial scale. Alternative routes to adipic acid involving cyclohexanone, cyclohexene, cyclohexane, etc. and polyoxo(peroxo)metalates or redox molecular sieves as liquid-phase oxidation catalysts, are compared. Alternatives, both biochemical and chemical, are being sought.     

Enhancement of C−H Oxidizing Ability in Co–O2 Complexes through an Isolated Heterobimetallic Oxo Intermediate

The characterization of intermediates formed through the reaction of transition‐metal complexes with dioxygen (O₂) is important for understanding oxidation in biological and synthetic processes. Here, the reaction of the diketiminate‐supported cobalt(I) complex L^tBuCo with O₂ gives a rare example of a side‐on dioxygen complex of cobalt. Structural, spectroscopic, and computational data are most consistent with its assignment as a cobalt(III)–peroxo complex. Treatment of L^tBuCo(O₂) with low‐valent Fe and Co diketiminate complexes affords isolable oxo species with M₂O₂ “diamond” cores, including the first example of a crystallographically characterized heterobimetallic bis(μ‐oxo) complex of two transition metals. The bimetallic species are capable of cleaving C−H bonds in the supporting ligands, and kinetic studies show that the Fe/Co heterobimetallic species activates C−H bonds much more rapidly than the Co/Co homobimetallic analogue. Thus heterobimetallic oxo intermediates provide a promising route for enhancing the rates of oxidation reactions.     

Structural Modulation on NiCo2S4Nanoarray by N Doping to Enhance 2e-ORR Selectivity for Photothermal AOPs and Zn−O2Batteries**

As a H₂O₂ generator, a 2e⁻ oxygen reduction reaction active electrocatalyst plays an important role in the advanced oxidation process to degrade organic pollutants in sewage. To enhance the tendency of NiCo₂S₄ towards the 2e⁻ reduction reaction, N atoms are doped in its structure and replace S²⁻. The result implies that this weakens the interaction between NiCo₂S₄ and OOH*, suppresses O−O bond breaking and enhances H₂O₂ selectivity. This electrocatalyst also shows photothermal effect. Under photothermal heating, H₂O₂ produced by the oxidation reduction reaction can decompose and releaseOH, which degrades organic pollutants through the advanced oxidation process. Photothermal effect induced by the advance oxidation process shows obvious advantages over the traditional Fenton reaction, such as wide pH adaptation scope and low secondary pollutant due to its Fe²⁺ free character. With Zn as anode and the electrocatalyst as cathode material, a Zn−O₂ battery is assembled. It achieves electricity generation and photothermal effect induced by the advance oxidation process simultaneously.     

Kinetic and Mechanistic Aspects of Reactivity of the Oxidation of Some Fe(II)–Tris Schiff Base Complexes by Peroxydisulfate: Spectrophotometric Tracer and Solvent Effect on the Reactivity

The kinetics of the oxidation of some Fe(II)–Tris Schiff base complexes by peroxydisulfate was studied spectrophotometrically in the aqueous medium and in the organic–aqua binary mixture. The inspected complexes were derived from the condensation of 2‐acetylpyridine and substituted benzylamines. The oxidation reaction of the studied complexes was followed at 303 K under pseudo–first‐order conditions. It was found that the oxidation reaction by S₂O₈^2? consists of two steps. The first step is the formation of an ion pair from the reactants, and the second step is an electron transfer from the metal center to the peroxydisulfate oxidant, with an associated peroxo bond fissure. A mechanism, based on the experimental results, was proposed, and the rate law was derived. The effect of organic solvent on the reaction rate was studied in the presence of different ratios (v/v) of methanol–water and acetone–water mixtures. Moreover, the changes in the activation barrier from water to water–methanol and water–acetone mixtures were estimated from the kinetic data. The transfer chemical potentials of the initial and transition states from water into mixed solvents were determined from solubility measurements. Solvent effects on the reaction rate were discussed in terms of initial state versus transition state solvation.     

Synthesis and cytochrome P-450-like reactivity of polypeptide-bound porphinatoiron(III)

Polypeptide-bound porphinatoiron(III) was synthesized. This polymer could catalyze the hydroxylation of aniline with H₂O₂ more effectively, and catalyze the monooxygenase-type oxidation of olefins more selectively in the porphinatoiron (III)-O₂-NaBH₄-Me₄NOH system²⁾ than non-bound porphinatoiron.     

Exploring the Reactivity of Multicomponent Photocatalysts: Insight into the Complex Valence Band of BiOBr

The band structure of multicomponent semiconductor photocatalysts, as well as their reactivity distinction under different wavelengths of light, is still unclear. BiOBr, which is a typical multicomponent semiconductor, may have two possible valence‐band structures, that is, two discrete valence bands constructed respectively from O 2p and Br 4p orbitals, or one valence band derived from the hybridization of these orbitals. In this work, aqueous photocatalytic hydroxylation is applied as the probe reaction to investigate the nature and reactions of photogenerated holes in BiOBr. Three organic compounds (microcystin‐LR, aniline, and benzoic acid) with different oxidation potentials were selected as substrates. Isotope labeling (H₂¹⁸O as the solvent) was used to determine the source of the O atom in the hydroxyl group of the products, which distinguishes the contribution of different hydroxylation pathways. Furthermore, a spin‐trapping ESR method was used to quantify the reactive oxygen species (^.OH and ^.OOH) formed in the reaction system. The different isotope abundances of the hydroxyl O atom of the products formed, as well as the reverse trend of the ^.OH/^.OOH ratio with the oxidative resistance of the substrate under UV and visible irradiation, reveal that BiOBr has two separate valence bands, which have different oxidation ability and respond to UV and visible light, respectively. This study shows that the band structure of semiconductor photocatalysts can be reliably analyzed with an isotope labeling method.     

Scaled‐up,selective and green synthesis of sulfoxides under mild conditions using (CeIII‐MoVI)Ox/aniline hybrid rods as an efficient catalyst

A novel hybrid material, (Ce^III‐Mo^VI)O_x/aniline, with rod‐like morphology is synthesized through a wet chemical method using Mo₃O₁₀(C₆H₅NH₃)₂.2H₂O nanowires as precursor. The synthesized materials are characterized by XRD, XPS, SEM, TEM, FTIR, Raman, UV–Vis, TGA, and elemental analysis. Also, their catalytic activities as a hybrid catalyst are tested in the selective oxidation of sulfides using hydrogen peroxide as a green oxidant. The proposed novel hybrid catalyst shows an excellent performance under green conditions at mild temperature. Furthermore, the scalability of the oxidation reaction is shown by making multi‐gram quantities at optimized conditions.     

Efficient epoxidation of electron-deficient alkenes with hydrogen peroxide catalyzed by [γ-PW10O38V2(μ-OH)2]3-

A divanadium‐substituted phosphotungstate, [γ‐PW₁₀O₃₈V₂(μ‐OH)₂]^3? ( I ), showed the highest catalytic activity for the H₂O₂‐based epoxidation of allyl acetate among vanadium and tungsten complexes with a turnover number of 210. In the presence of I , various kinds of electron‐deficient alkenes with acetate, ether, carbonyl, and chloro groups at the allylic positions could chemoselectively be oxidized to the corresponding epoxides in high yields with only an equimolar amount of H₂O₂ with respect to the substrates. Even acrylonitrile and methacrylonitrile could be epoxidized without formation of the corresponding amides. In addition, I could rapidly (≤10 min) catalyze epoxidation of various kinds of terminal, internal, and cyclic alkenes with H₂O₂ under the stoichiometric conditions. The mechanistic, spectroscopic, and kinetic studies showed that the I ‐catalyzed epoxidation consists of the following three steps: 1) The reaction of I with H₂O₂ leads to reversible formation of a hydroperoxo species [γ‐PW₁₀O₃₈V₂(μ‐OH)(μ‐OOH)]^3? ( II ), 2) the successive dehydration of II forms an active oxygen species with a peroxo group [γ‐PW₁₀O₃₈V₂(μ‐η²:η²‐O₂)]^3? ( III ), and 3) III reacts with alkene to form the corresponding epoxide. The kinetic studies showed that the present epoxidation proceeds via III . Catalytic activities of divanadium‐substituted polyoxotungstates for epoxidation with H₂O₂ were dependent on the different kinds of the heteroatoms (i.e., Si or P) in the catalyst and I was more active than [γ‐SiW₁₀O₃₈V₂(μ‐OH)₂]^4?. On the basis of the kinetic, spectroscopic, and computational results, including those of [γ‐SiW₁₀O₃₈V₂(μ‐OH)₂]^4?, the acidity of the hydroperoxo species in II would play an important role in the dehydration reactivity (i.e., k₃). The largest k₃ value of I leads to a significant increase in the catalytic activity of I under the more concentrated conditions.