纳米级TiO2光催化氧化聚丙烯酰胺

采用纳米级TiO2微粒为催化剂,研究了液固相悬浮体系中聚丙烯酰胺(PAM)的光催化降解和降粘性质.探讨了不同催化剂用量、PAM浓度和光照时间对光催化降解率的影响.结果表明,纳米级TiO2微粒具有较高的光催化活性,其光催化氧化PAM降解率在90 min时达90%以上,水中残留的PAM浓度为0.001%～0.003%;光催化降粘性能非常显著,光照5～10 min,含PAM的油田污水的粘度下降至蒸馏水的粘度.     

温敏两亲性接枝物PAM-g-PNIPAm的合成及表征

以巯基乙胺为分子量调节剂,以丙烯酰氯作为链端转化剂合成了不同分子量的端丙烯酰胺基聚(N-异丙基丙烯酰胺)(PNIPAm)大分子单体;与丙烯酰胺共聚合,合成了以PNIPAm为侧链的接枝聚丙烯酰胺.用FTIR和¹HNMR方法表征了接枝聚合物与大分子单体的组成.该接枝聚合物在水溶液中具有热缔合特性及明显的温敏增稠性,水溶液的粘度在32～50℃之间随温度增加而增加.     

Fenton试剂氧化处理模拟含聚丙烯酰胺污水的研究北大核心CSCD

主要研究了利用Fenton试剂氧化法处理模拟含部分水解聚丙烯酰胺的污水,考察了H2O2浓度、Fe2+浓度、温度、反应时间、pH值等因素对Fenton试剂氧化降解模拟含部分水解聚丙烯酰胺污水的影响。结果表明:H2O2浓度为5.3mmol.L-1、Fe2+浓度为1.44mmol.L-1、温度30℃、反应时间15min、pH值范围3～4时,聚丙烯酰胺的氧化降解效果最好,且在最佳条件下,聚丙烯酰胺和CODCr的去除率分别达到87.61%和82.60%。通过对Fenton氧化降解前后的聚丙烯酰胺样品的红外谱图对比,可以推断出Fenton试剂将侧链的酰胺基氧化成羧基。     

疏水缔合聚丙烯酰胺与双子表面活性剂的相互作用

制备了一种脂肪酸酯双磺酸盐型双子表面活性剂, 利用粘度法、界面张力法和原子力显微镜研究了疏水缔合聚丙烯酰胺与双子表面活性剂在溶液中的相互作用. 实验结果表明: 疏水缔合聚丙烯酰胺在溶液中能够通过自组装形成疏水微区并发展成网络结构, 疏水微区与表面活性剂在溶液中能形成混合胶束; 当一定量的表面活性剂加入时, 对疏水缔合聚丙烯酰胺的自组装起促进作用, 而过多双子表面活性剂的加入又会对聚合物分子的自组装起抑制作用, 从而显著影响疏水缔合聚丙烯酰胺的溶液性质, 随着表面活性剂浓度的增加, 聚合物溶液粘度先增加、再降低; 同时, 疏水缔合聚丙烯酰胺对双子表面活性剂的界面性能也有较大影响, 聚合物的加入使双子表面活性剂降低油/水界面张力的能力下降, 油/水界面张力达到平衡所需时间延长.     

表面活性剂复合体系提高原油采收率研究

为了提高中后期油田原油的采收率,采用聚丙烯酰胺和非离子-阴离子型表面活性剂NPAC构建了一种二元复合驱油体系。以油水界面张力性能、黏度、老化稳定性、乳化能力、洗油率等作为评价指标,研究并优化NPAC活性剂复合体系对提高原油采收率的试验条件,为油田回注提供理论与实践参考。研究表明:聚丙烯酰胺和NPAC二元复合体系综合性能优异,原油洗油率达到32. 4%,乳化指数为2. 1。该研究对指导表面活性剂/聚合物二元复合体系对提高油田原油采收率具有重要意义。     

絮凝处理对聚驱污水中部分水解聚丙烯酰胺浓度的影响

用常见无机和有机絮凝剂处理了聚驱污水,分别考察了絮凝剂单剂和复配处理后聚驱污水中残余部分水解聚丙烯酰胺(HPAM)质量浓度和透光率随絮凝剂剂量的变化.结果表明:采用无机絮凝剂处理聚驱污水时,残余HPAM质量浓度随絮凝剂剂量增加先减小后增大;采用有机絮凝剂处理聚驱污水时,残余HPAM质量浓度随絮凝剂剂量增加而线性增加.将无机絮凝剂与无机絮凝剂复配使用,则残余HPAM质量浓度与透光率成反比;将无机絮凝剂与有机絮凝剂复配使用,则残余HPAM质量浓度取决于复配体系中阳离子聚丙烯酰胺(CPAM)的添加量.     

超高分子量阳离子型聚丙烯酰胺合成及其絮凝性能研究

聚丙烯酰胺(PAM)的絮凝性能与其分子量成正相关，而阳离子型聚丙烯酰胺(CPAM)在处理含带电悬浮颗粒的污水过程中显著优于聚丙烯酰胺。然而，传统共聚法难以合成超高分子量的阳离子型聚丙烯酰胺，从而限制了其絮凝性能。本项工作以超高分子量聚丙烯酰胺为基板，通过季铵化反应，直接获得了超高分子量的阳离子型聚丙烯酰胺絮凝剂。通过进一步系统探究季铵化反应条件，优化了产物的阳离子度，其絮凝性能也得到极大提高。     

凝胶色谱法定量分析污水中聚丙烯酰胺

建立了凝胶色谱分析污水中部分水解聚丙烯酰胺的方法。采用普通商品水溶性凝胶色谱往,通过变换淋洗剂的作法,消除了非体积排斥效应的影响,实现了定量分析。讨论了紫外检测波长对部分水解聚丙烯酰胺测定结果的影响,检验了油田污水、选矿污水、自来水及盐水体系对结果的影响,并与溴氧比法测定的结果作了比较,所建方法的浓度分析范围为０．１～２００ｍｇ／Ｌ,精度为±２％,检测下限为０．１ｍｇ／Ｌ。     

聚二甲基二烯丙基氯化铵对于模拟油田聚驱污水的絮凝性能

用絮凝剂二甲基二烯丙基氯化铵(DMDAAC)的均聚物和共聚物处理了模拟油田聚驱污水.考察了影响絮凝效果的因素,并进行了与无机絮凝剂的复配研究.实验结果表明:DMDAAC的均聚物和共聚物的最佳絮凝温度分别为30℃和33℃;最佳投药量范围与污水中部分水解聚丙烯酰胺浓度有关;残留聚合物含量低,阳离子度高时,絮凝效果较好;与聚合氯化铝(PAC)的复配可以实现优势互补,达到较理想的聚驱污水处理效果.     

超亲水-水下超疏油PVDF-g-PAA多孔膜的制备及油水分离性能

采用相反转方法制备了丙烯酸(AA)接枝的超亲水-水下超疏油聚偏氟乙烯膜(PVDF-g-PAA),通过加入一定量的聚乙烯吡咯烷酮获得可用于油水分离的多孔聚偏氟乙烯膜.多孔聚偏氟乙烯膜具有较好的抗油污染性能及较高的力学强度,可以快速高效地分离油水混合体系和乳化油水体系,分离性质稳定,多次使用后对油水混合物的分离效率在98%以上,对油水乳化液的分离效率在91%以上,可广泛应用于油水混合体系和乳化油水体系的油水分离.     

金属阳离子对聚丙烯酰胺溶液黏度的影响及其降黏机理研究

聚丙烯酰胺(HPAM)是油田常用的驱油聚合物,用油田污水配制HPAM溶液易导致其黏度明显降低,影响驱油效果。依据埕东油田污水实测的各种金属阳离子含量来配制HPAM溶液,测得各金属阳离子对其黏度影响由大到小的顺序为:Na⁺>Fe²⁺>Ca²⁺>K⁺>Mg²⁺;通过红外光谱和扫描电镜分析金属阳离子导致HPAM溶液降黏的机理,Na⁺、K⁺、Ca²⁺、Mg²⁺主要是通过与HPAM链上的羧酸根阴离子静电引力相互作用,降低HPAM分子表面原有的电荷密度,造成分子链卷曲,同时减弱了极性基团的溶剂化能力,释放大量的"束缚水",从而使黏度显著降低;Fe²⁺离子主要是与水中溶解氧共同作用,引发自由基反应,导致HPAM骨架水解断裂,致使黏度显著降低。     

Interaction Between the Hydrophobically Modified Polyacrylamide and HPAM-Flooding Produced Liquid

In order to utilize the produced liquid of hydrolyzed polyacrylamide (HPAM) flooding to enhance oil recovery, the interaction between hydrophobically modified polyacrylamide (HMPAM) and the produced liquid of HPAM flooding was investigated. The viscous characteristic of HMPAM in aqueous solution was investigated by Ubbelohde viscometer. The results show the intrinsic viscosity of HMPAM in aqueous solution is higher than that of HPAM, indicating that HMPAM has better effect on increasing the viscosity of aqueous solution. The viscosity of the complex system consisted of HMPAM and the produced liquid from HPAM flooding is lower than that of the HMPAM system, but higher than that of the HMPAM/HPAM complex system in mineralized water. In order to investigate the major factor of the influence on the viscosity of the HMPAM/produced liquid complex system, the viscosities of HMPAM/HPAM (and hydrolyzed HPAM with different hydrolysis degree) in distilled water and in mineralized water were studied. The fluorescence spectrum and transmission electron microscopy measurements were carried out to investigate the interaction between HPMAM and produced liquid from a microscopic perspective. These results are useful for farther enhancing oil recovery after HPAM flooding.     

化学驱油过程中部分水解聚丙烯酰胺的二级结构研究

高分子量聚丙烯酰胺水溶液因其显著的增粘作用与粘弹性而在三次采油中得到广泛应用 .多年来大庆油田采用注入部分水解聚丙烯酰胺 (HPAM)水溶液驱油 ,实践证明 ,此法可大幅度提高原油采出率[1,2 ] .关于聚丙烯酰胺及其部分水解产物 (结构上等价于丙烯酰胺与丙烯酸的无规共聚物 )的链结构评价及其同高价离子的络合作用已有一些报道 [3～ 6] .在聚合物驱油过程中 ,HPAM水溶液在地下岩层中流动时间较长 ,实验室难以模拟 ,有关 HPAM流经地下岩层后的结构研究尚未见报道 .评价化学驱油油田矿场采出液中 HPAM的链结构 ,并探讨其结构变化机理…     

Enhanced heavy oil recovery by organic alkali combinational flooding solutions

Although alkaline/surfactant/polymer (ASP) flooding is successfully applied in oil fields, some disadvantages such as scales, corrosion effects, and viscosity reductions of polymer solutions appear. Usage of organic alkalis can avoid or decrease these disadvantages. In this paper, the physicochemical properties, including interfacial tension (IFT), and viscosity, of organic alkali combinational flooding solutions and their effectiveness as enhanced oil recovery agents are investigated. Monoethanolamine (MEA) is the optimal one for decreasing the IFT among the three organic alkalis studied in this paper. Although MEA cannot decrease the IFT as low as NaOH does, it has good compatibility with both surfactant and the polymer hydrolyzed polyacrylamide (HPAM). MEA not only helps a surfactant solution or HPAM/surfactant mixture attain ultralow IFT values, but can also promote better viscosity stability for HPAM or HPAM/surfactant solutions compared to NaOH. Moreover, core flood experiments show that adding MEA can obtain additional tertiary oil recovery of 6%–10% original oil in place (OOIP) on the top of HPAM or HPAM/surfactant flooding, although MEA has a lower enhanced oil recovery than NaOH. The experimental results show that MEA is a good choice to replace NaOH in enhancing heavy oil recovery.     

水解聚丙烯酰胺柠檬酸铝体系成胶行为与形态结构的研究

采用光学显微镜、扫描电镜及流变性能测试等手段 ,研究了部分水解聚丙烯酰胺 (HPAM )与柠檬酸铝 (AlCA)的成胶行为与形态结构 .结果表明 ,当AlCA浓度超过 10 0mg/L时 ,随HPAM浓度由低向高变化 ,HPAM AlCA交联体系可形成三种不同形态结构的凝胶 :分散凝胶 (由交联聚合物颗粒形成的分散体 )、两相(分散凝胶相与连续网状凝胶相 )共存凝胶和连续网状凝胶 .HPAM AlCA形成分散凝胶时 ,无明显的粘度升高现象 ,但体系中存在由HPAM大分子交联在一起的颗粒结构 .HPAM AlCA在形成连续网状凝胶时 ,体系复模量和复粘度大幅度提高 ,网状凝胶中含有粒状凝胶颗粒 .     

一些聚合物对中相微乳液物性的影响

研究了水解聚丙烯酰胺、黄原胶和木质素磺酸盐对中相微乳液相体积、粘度和界面张力的影响。实验结果表明: 含有聚丙烯酰胺时,中相微乳液的相态、增溶参数、中相与下相间界面张力及中相粘度均无明显变化。生物聚合物对中相微乳液的物理性质影响也不大。木质素磺酸盐则对微乳液的形成产生明显影响: 随着木质素磺酸盐浓度的增大,微乳液由中相转变为上相,相应的物理参数亦有变化。     

Enhanced Viscosity of Poly(acrylamide) Solution in the Presence of Chromium Citrate Triggered by Release of CO2

Partially hydrolyzed polyacrylamide (HPAM) has been widely used for water shut-off and profile control to enhance oil recovery. Herein, we reported a novel technique by which the crosslinking between HPAM and Cr³⁺ in aqueous solutions at 60 ℃ can be delayed effectively. Citric acid was selected as an organic complexing agent of Cr³⁺ so that the crosslinking between HPAM and Cr³⁺ can be prevented completely. Due to the decomposition of the bicarbonate (HCO₃^-) embedded in solution, CO₂ released from solution and the pH value of solution increased gradually. The degree of ionization of HPAM and its ability to complex with Cr³⁺ increased accordingly. When the complexation of Cr³⁺ with HPAM is stronger than that with citric acid, the viscosity of the HPAM solution increased significantly. Under the closed condition, together with the existence of potassium dihydrogen phosphate (KH₂PO₄), the release of CO₂ was very slow and the condition was highly controlled so that the ionization of HPAM was prevented initially. Furthermore, the hydrogen bonding interactions between HPAM and melamine embedded in solution previously also postponed the ionization of HPAM. As a result, the crosslinking between HPAM and Cr³⁺ can be delayed for almost one month, completely meeting the requirements for deep water shut-off and profile control to enhance oil recovery.     

Studies on the Preparation and Properties of Organic Acid Aluminate Linked Polyacrylamide

The organic acid aluminate (AlOA) was used as a linked agent to enhance the viscosity of partially hydrolyzed polyacrylamide (HPAM) solution. The influencing factors, such as HPAM concentration, pH, temperature, and salinity on the linked polymer system were probed via the investigations on rheological properties, microstructure, and location of the linked polymer systems. The result show that the scattered gelatin particles are contained in the linked polymer network structure. The system behaves as mainly elasticity, and the system belongs to the linear viscoelastic fluid. For the solution with elasticity, its subsequent fluid not only has a boost effect on the front fluid, but also the front fluid has a stronger effect of “drawing” and “dragging” on its side and subsequent fluid. Therefore, it will be important in both theory investigation and the actual oil recovery.     

粘度法研究胶态分散凝胶交联过程

通过粘度测定方法,研究了部分水解聚丙烯酰胺（ＨＰＡＭ）／ 柠檬酸铝（ＡｌＣｉｔ） 交联过程中粘度变化的特性．聚合物浓度高的ＨＰＡＭ／ＡｌＣｉｔ 体系粘度随反应时间的延长而上升,其体系粘度最终高于相同聚合物浓度的ＨＰＡＭ 溶液粘度．聚合物浓度低的ＨＰＡＭ／ＡｌＣｉｔ 体系粘度随反应时间的延长而下降,其体系粘度低于相同聚合物浓度的ＨＰＡＭ 溶液粘度．ＨＰＡＭ／ＡｌＣｉｔ 交联体系的聚合物浓度低于临界浓度时,交联反应后形成稀胶态分散凝胶（ＴＣＤＧ） ．在实验条件下,临界浓度在１５０ ～３００ｍｇ／Ｌ 之间．当聚合物浓度于临界浓度和７００ｍｇ／Ｌ之间时,形成浓胶态分散凝胶（ＣＣＤＧ） ;当聚合物浓度高于７００ｍｇ／Ｌ 时,ＨＰＡＭ／ＡｌＣｉｔ 交联体系形成整体凝胶．     

聚丙烯酰胺的形态结构研究

本文用电子显微镜深入的研完了部分水解聚丙烯酰胺在水溶液中的形态。给出大分子的伸展网状结构是其稀溶液高粘度的结构本质。并详细讨论了聚合物的水解度、分子量、外加盐种类及波度与分子聚集状态的关系。