Photolysis of 1,2-dihydroquinolines in micellar solutions of anionic and cationic surfactants

The kinetics of the photolysis of substituted 1,2-dihydroquinolines (DHQ) in micellar solutions was studied by steady-state and flash photolysis. The photolysis mechanism depends dramatically on the location of DHQ molecules in micelles, which is governed by the surfactant nature. In micellar solutions of the anionic surfactant sodium dodecyl sulfate (SDS), where the DHQ molecules are located in the Stern layer, the intermediate species decay kinetics follows a first-order law. When DHQ is in neutral form (pH 4–12), the rate constant of the intermediate carbocation decay increases from 25 to 198 s^?1 with an increasing concentration of DHQ in micelles. The positive micellar catalysis is caused by the acceleration of the final product formation with the DHQ molecule via proton abstraction from the intermediate cation. The formation of several types of intermediate species—carbocations in the aqueous phase and aminyl radicals in micelles—is observed in micellar solutions of the cationic surfactant cetyltrimethylammonium bromide (CTAB) due to the preferential location of DHQ molecules in the micellar core. The carbocation decays via a pseudofirst-order reaction with a rate constant close to that in the aqueous solution. The lifetime of the DHQ aminyl radicals in the micellar solutions is longer by several orders of magnitude than the lifetime observed for homogeneous solutions of hydrocarbons and alcohols.     

Production of aqueous colloidal dispersions of carbon nanotubes

Stable homogeneous dispersions of carbon nanotubes (CNTs) have been prepared by using sodium dodecyl sulfate (SDS) as dispersing agent. To our knowledge, it is the first report to quantitatively characterize colloidal stability of the dispersions by UV-vis spectrophometric measurements. When the sediment time reaches 500 h, the supernatant CNT concentration drops as much as 50% for the bare CNT suspension, compared to 15% with the addition of SDS. Furthermore, after 150 h, no precipitation is found for CNT/SDS dispersions, exhibiting an extreme stability. Zeta potential, auger electron microscopy, and FTIR analysis are employed to investigate the adsorption mechanism in detail. It has been concluded that the surfactant containing a single straight-chain hydrophobic segment and a terminal hydrophilic segment can modify the CNTs-suspending medium interface and prevent aggregation over long periods. The morphology of the CNT dispersions is observed with optical microscopy. An intermediate domain of homogeneously dispersed nanotubes exhibits an optimum at 0.5 wt% CNTs and 2.0 wt% SDS.     

Dielectric relaxation spectroscopy of aqueous micellar electrolyte solutions: A novel application to infer Dukhin number and zeta potential of a micelle

The complex permittivities of aqueous SDS solutions, with and without the addition of sodium chloride (NaCl), are measured in the frequency range from 200 MHz to 14 GHz. The SDS concentrations are chosen such that the SDS molecules aggregate to micelles. In this frequency range, the measured spectra allow for the identification of two different relaxation processes. That is, the relaxation of the water molecules at frequencies above 1 GHz and the micellar relaxation at frequencies lower than 1 GHz. It is found that the addition of NaCl to the system mostly affects the micellar relaxation process. In detail, the time constant as well as the amplitude of the relaxation decrease by adding NaCl. These effects are attributed to the change in the solution conductivity that changes the properties of the micelle's electrical double layer. We also extract the Dukhin number of the micelles as a function of surfactant and electrolyte content from the measurements. The Dukhin number is a dimensionless group that describes the influence of the surface conductivity on a phenomena. A regression between Dukhin numbers and free sodium ions is found so that all data collapses on a single curve independent of the surfactant concentration. The surface conductivity is a manifestation of the electrical double layer and we use the Bikerman equation to infer the zeta potential of the micelles. Comparison to literature data shows very good agreement and proves that dielectric relaxation spectroscopy can be engaged to infer the zeta potential of micelles. Abbreviations: CMC critical micelle concentration, DRS dielectric relaxation spectroscopy, EDL electrical double layer     

The Hybrids of Polystyrene-block-Poly(ethylene Oxide) Micelles and Sodium Dodecyl Sulfate in Aqueous Solutions: Interaction with Rh Ions and Rh Nanoparticle Formation

The interaction of amphiphilic block copolymer, polystyrene-block-poly(ethylene oxide) (PS-b-PEO), with anionic surfactant, sodium dodecyl sulfate (SDS), in aqueous media has been studied by sedimentation in ultracentrifuge. Three well-defined populations of hybrid aggregates corresponding to micelles, micellar clusters, and supermicellar aggregates were detected in the PS-b-PEO/SDS aqueous solutions at various rotation rates. Parameters of all the micellar aggregates were characterized depending on the SDS loading. An increase in the SDS loading was found to result in an increase in block copolymer/surfactant micelle size and weight at the SDS concentration of 0.8x10(-3) mol/L and in a slight decrease of both parameters at critical micelle concentration and at higher concentration. This decrease was caused by incorporation of SDS molecules in block copolymer micelles followed by charging the PS core and repulsion between similar charges. Using dichlorotetrapyridine rhodium(III)chloride hexahydrate ([Rh(Py)(4)Cl(2)]Clx6H(2)O), ion exchange of surfactant counterions in the hybrid PS-b-PEO/SDS system for Rh cations was carried out, which allowed saturating the micellar structures with Rh species. Subsequent reduction of the Rh-containing hybrid solutions with NaBH(4) resulted in the formation of Rh nanoparticles with a diameter of 2-3 nm mainly located in the block copolymer micellar aggregates. Copyright 2000 Academic Press.     

Small angle neutron scattering study of sodium dodecyl sulfate micellar growth driven by addition of a hydrotropic salt

The structures of aggregates formed in aqueous solutions of an anionic surfactant, sodium dodecyl sulfate (SDS), with the addition of a cationic hydrotropic salt, p-toluidine hydrochloride (PTHC), have been investigated by small angle neutron scattering (SANS). The SANS spectra exhibit a pronounced peak at low salt concentration, indicating the presence of repulsive intermicellar interactions. Model-independent real space information about the structure is obtained from a generalized indirect Fourier transformation (GIFT) technique in combination with a suitable model for the interparticle structure factor. The interparticle interaction is captured using the rescaled mean spherical approximation (RMSA) closure relation and a Yukawa form of the interaction potential. Further quantification of the geometrical parameters of the micelles was achieved by a complete fit of the SANS data using a prolate ellipsoidal form factor and the RMSA structure factor. The present study shows that PTHC induces a decrease in the fractional charge of the micelles due to adsorption at the micellar surface and consequent growth of the SDS micelles from nearly globular to rodlike as the concentration of PTHC increases.     

Adsorption kinetics of surfactant mixtures from micellar solutions as studied by maximum bubble pressure technique

The adsorption kinetics of micellar solutions of anionic/cationic SDS/DATB mixtures with mixing ratios of 10/1 and 10/2, respectively, are studied experimentally by means of the maximum bubble pressure method. For long adsorption times the adsorption of the highly surface-active anionic/cationic complex leads to a decrease of dynamic surface tension in comparison to the single SDS system. However, the situation is the reverse for short adsorption times where the dynamic surface tension is increased by addition of the cationic surfactant, although the overall concentration is increased. This unexpected behavior is explained by partial solubilization of free SDS molecules into micelles formed by SDS/DTAB complexes. With increasing overall concentration, when eventually the CMC of SDS is reached, the anionic/cationic complex itself is solubilized by SDS micelles. Finally, no complex micelles, which for their part can solubilize an excess of SDS molecules, are present. Hence, the dynamic properties of the solution are no longer influenced by the depletion of SDS molecules and the mixture tends to behave like a pure SDS solution.     

Effect of the electrostatic charge on the mechanism inducing liposome solubilization: a kinetic study by synchrotron radiation SAXS

The anionic surfactant sodium dodecyl sulfate (SDS) was used to induce the initial steps of the solubilization of liposomes. The structural transformations as well as the kinetics associated with this initial period were studied by means of time-resolved small-angle X-ray scattering (SAXS) using a synchrotron radiation source. Neutral and electrically charged (anionic and cationic) liposomes were used to investigate the effect of the electrostatic charges on the kinetics of these initial steps. The mechanism that induces the solubilization process consisted of adsorption of surfactant on the bilayers and desorption of mixed micelles from the liposomes surface to the aqueous medium. In all cases the time needed for desorption of the first mixed micelles was shorter than that for complete adsorption of the surfactant on the liposomes surface. The present work demonstrates that adsorption of the SDS molecules on negatively charged liposomes was slower and release of mixed micelles from the surface of these liposomes was faster than for neutral liposomes. In contrast, in the case of positively charged liposomes, the adsorption and release processes were, respectively, faster and slower than those for neutral vesicles.     

Determination of the surface coverage of exfoliated carbon nanotubes by surfactant molecules in aqueous solution

To determine the surface coverage of exfoliated carbon nanotubes by surfactant molecules, we propose four experimental methods based on thermogravimetric analysis, UV-vis spectroscopy, surface tension measurements, and a variant of Maron's titration. We apply all four methods to aqueous mixtures of carbon nanotubes and the surfactant sodium dodecyl sulfate and consistently find a surface coverage of between 1.5 and 2 g of surfactant per gram of carbon nanotubes. This corresponds to slightly more than two SDS molecules per square nanometer, which is comparable to the known maximum packing density of SDS at the air-water interface.     

Effect of added poly(oxyethylene)dodecyl ether on the phase and rheological behavior of wormlike micelles in aqueous SDS solutions

Upon the addition of a short EO chain nonionic surfactant, poly(oxyethylene) dodecyl ether (C12EOn), to dilute micellar solution of sodium dodecyl sulfate (SDS) above a particular concentration, a sharp increase in viscosity occurs and a highly viscoelastic micellar solution is formed. The oscillatory-shear rheological behavior of the viscoselastic solutions can be described by the Maxwell model at low shear frequency and combined Maxwell-Rouse model at high shear frequency. This property is typical of wormlike micelles entangled to form a transient network. It is found that when C12EO4 in the mixed system is replaced by C12EO3 the micellar growth occurs more effectively. However, with the further decrease in EO chain length, phase separation occurs before a viscoelastic solution is formed. As a result, the maximum zero-shear viscosity is observed at an appropriate mixing fraction of surfactant in the SDS-C12EO3 system. We also investigated the micellar growth in the mixed surfactant systems by means of small-angle X-ray scattering (SAXS). It was found from the SAXS data that the one-dimensional growth of micelles was obtained in all the SDS-C12EOn (n=0-4) aqueous solutions. In a short EO chain C12EOn system, the micelles grow faster at a low mixing fraction of nonionic surfactant.     

SDS对SB3-12胶束表面电荷密度的调控作用及对药物增溶的影响

两性离子甜菜碱表面活性剂(SB3-12)胶束具有较好的生物相容性,由于相反电荷的极性头之间具有静电中和作用,胶束表面具有小的负电荷密度。当加入阴离子的十二烷基硫酸钠(SDS)以后,负离子SD-与SB3-12胶束极性区内层季铵正电荷的静电中和作用,能连续地调节胶束表面磺酸基的负电荷密度,这有利于对药物分子的选择性增溶和调节在生理条件下的药物的输送。等温滴定量热(ITC)研究发现SB3-12和SDS有强的协同效应,混合临界胶束浓度(CMC)和胶束化焓明显降低,并得到两者协同效应的弱静电作用机理。当模型药物分子芦丁(Rutin)与SB3-12/SDS混合胶束作用时,芦丁7位羟基的氢解离后的阴离子与SDS共同作用于SB3-12形成混合胶束。UV-Vis吸收光谱和~1H NMR谱研究发现,在SB3-12胶束中,芦丁分子的A环位于季铵阳离子附近,B环位于两个相反电荷之间的弱极性区域。在SDS胶束中,B环位于栅栏层,而A环和二糖暴露于水相侧。在混合胶束中,随着SDS摩尔分数增加,对A环的静电吸引变弱。离子表面活性剂对两性离子表面活性剂胶束表面电荷密度的调节作用,本质上是对胶束极性区域的物理及化学性质的微调,进而实现对药物的可控增溶。     

Surface activity and redox behavior of a non-ionic surfactant containing a phenothiazine group

A novel non-ionic surfactant, -(phenothiazinylhexyl)-ω-hydroxy-oligo(ethylene oxide) (PCPEG) containing phenothiazine as an electro-active group has been synthesized. Fundamental interfacial behavior of the surfactant at the air/water interface has been investigated by means of surface tensiometry to provide an insight into the relationship between the structure of the hydrophobic moiety and the surfactant properties. A comparison of diffusivity of PCPEG in the aqueous phase with that in the acetonitrile solution at high PCPEG concentrations shows that micellization has a pronounced effect on the redox behavior of PCPEG. The electrochemical responses for PCPEG aqueous solutions at the interface of a glassy carbon electrode are fairly dependent on the concentration of PCPEG. Above CMC, PCPEG molecules self-associate to form micellar aggregates and the formation and disruption of micelles can be reversibly controlled by change in the redox state of the phenothiazine group. The cyclic voltammetric responses for PCPEG aqueous solutions have been correlated with the dissolved states to explain the distinctive feature of the surfactant.     

Partitioning of macrocyclic compounds in a cationic and an anionic micellar solution: a small-angle neutron scattering study

Following a previous investigation on partitioning of some macrocycle compounds in sodium dodecyl sulfate (SDS) and dodecyltrimethylammonium bromide (DTAB) aqueous solutions and their effect on the micellar structure, a small-angle neutron scattering (SANS) study has been performed at fixed surfactant content (0.20 mol/L) and varying macrocycle concentrations from 0.20 up to 1.0 mol/L. Conductivity measurements have been also performed in order to evaluate the effect of the presence of macrocycles on the critical micellar concentration (cmc) of the two surfactants. SANS experimental data were fitted successfully by means of a core-plus-shell monodisperse prolate ellipsoid model. It has been found that 1,4,7,10,13,16-esaoxacyclooctadecane (18C6) and 4,7,13,16-tetraoxa-1,10-diazacyclooctadecane (22) do not interact with DTAB micelles whereas their sodium complexes interact with SDS aggregates and partially localize, as a consequence of electrostatic interaction, on the micellar surface or in the Stern layer. 2,5,8,11,14,17-Hexaoxabicyclo[16.4.0] dicosane (B18C6), as a consequence of the increased hydrophobic character with respect to 18C6, interacts with DTAB hydrocarbon chains and partially localizes in the inner part of micelles. This finding has been successfully used to justify the higher amount of B18C6 compared to the 18C6 one found in the SDS micellar phase. The substituted crown ether has been found localized both on the micelle surface via complex formation and in the inner part of micelles as a consequence of the increased hydrophobic character. For all systems, the aggregate size primarily decreases with the amount of macrocycle in the micellar phase. The interpretation of cmc trends as a function ofmacrocycle concentration gives information on its distribution between micellar and aqueous phases that is in line with SANS results.     

Competitive adsorption of an anionic and a nonionic surfactant on polystyrene latex particles as monitored by small x-ray scattering

Adsorption of the anionic surfactant sodium dodecylsulfate (SDS) as well as competitive adsorption of SDS with the nonionic surfactant Triton X-405 on a polystyrene latex has been examined by the use of small-angle x-ray scattering (SAXS). Since the latex particles only have a low contrast towards water whereas the electron densities of the added surfactants are rather high, their gradual adsorption can be monitored with good sensitivity. The particles covered with SDS have been investigated by the contrast variation method. A distinct core-shell structure has been observed. After maximum coverage of the surface is reached, the additional surfactant forms free micelles. The analysis presented here allows the simultaneous investigation of the covered particles and the free micelles. This is due to their respective characteristic scattering contributions in different angular ranges. Information on the competitive adsorption could be obtained by analyzing the structure of the coated particles and the composition of the free mixed micelles. The adsorption is shown to be an equilibrium process where adsorption of the nonionic component is found to be much stronger than of the SDS molecules.     

Adsorption of the anionic surfactant sodium dodecyl sulfate on a C18 column under micellar and high submicellar conditions in reversed‐phase liquid chromatography

Micellar liquid chromatography makes use of aqueous solutions or aqueous‐organic solutions containing a surfactant, at a concentration above its critical micelle concentration. In the mobile phase, the surfactant monomers aggregate to form micelles, whereas on the surface of the nonpolar alkyl‐bonded stationary phases they are significantly adsorbed. If the mobile phase contains a high concentration of organic solvent, micelles break down, and the amount of surfactant adsorbed on the stationary phase is reduced, giving rise to another chromatographic mode named high submicellar liquid chromatography. The presence of a thinner coating of surfactant enhances the selectivity and peak shape, especially for basic compounds. However, the risk of full desorption of surfactant is the main limitation in the high submicellar mode. This study examines the adsorption of the anionic surfactant sodium dodecyl sulfate under micellar and high submicellar conditions on a C₁₈ column, applying two methods. One of them uses a refractive index detector to obtain direct measurements of the adsorbed amount of sodium dodecyl sulfate, whereas the second method is based on the retention and peak shape for a set of cationic basic compounds that indirectly reveal the presence of adsorbed monomers of surfactant on the stationary phase.     

Application of a chemical equilibrium model to thermodynamic functions of transfer of alcohols from water to aqueous surfactants

In ternary aqueous solutions, hydrophobic solutes such as alcohols tend to aggregate with surfactants to form mixed micelles. These systems can be studied by meas of the functions of transfer of hydrophobic solutes from water to aqueous solutions of surfactant. These thermodynamic functions often go through extrema in the critical micellar concentration (CMC) region of the surfactant. A simple model based on interactions between surfactant and hydrophobic solute monomers, on the distribution of the hydrophobic solute between water and the micelles and on the shift in the CMC induced by the hydrophobic solute, can simulate the magnitude and trends of the transfer functions using parameters which are mostly derived from the binary systems. In order to check the model more quantitatively, volumes and heat capacities of transfer of alcohols from water to aqueous solutions of a nonionic surfactant, octyldimethylamine oxide, were measured. A quantitative agreement was achieved with three adjustable parameters. Good fits are also obtained for the transfers to the ionic surfactants, octylamine hydrobromide and sodium dodecylsulfate. When the equilibrium displacement contribution is small, the distribution constants and the partial molar properties of the alcohols in the micellar phase agree well with the parameters obtained with similar models.     

正离子型疏水改性聚氧乙烯单成相组分双水相系统的相行为

对正离子型疏水改性聚氧乙烯(HM-EO)单成相组分双水相系统的相行为进行了考察,并分析其电荷特性.HM-EO在水溶液中呈现两亲性,可以形成胶束,进而形成带电的胶束簇集体.通过改变溶液的pH值、盐浓度及添加带相反电荷的表面活性剂SDS,可改变胶束簇集体的带电状态,从而影响系统的相行为.增大pH值,有利于系统的分相.盐的添加也可以增大双水相两相区域,正离子影响次序为K+>Na+,负离子次序为SO42->F->Cl->Br->I-.进一步考察了HM-EO和SDS之间的相互作用,结果表明SDS能与HM-EO形成混合胶束簇集体,改变HM-EO双水相系统的带电特性.     

丙烯酰胺型阴离子表面活性单体的化学结构与其胶束化行为

对两种丙烯酰胺型阴离子表面活性单体(2-丙烯酰胺基十四烷磺酸钠, NaAMC₁₄S; 2-丙烯酰胺基十二烷磺酸钠, NaAMC₁₂S)的化学结构与胶束化行为的关系进行了较深入的研究. 使用紫外分光光度法测定了NaAMC₁₄S, NaAMC₁₂S及十二烷基磺酸钠(SDS)在水中的溶解度, 同时采用表面张力法(环法)测定了它们在不同温度下的临界胶束浓度CMC; 采用稳态荧光探针法测定了不同浓度的胶束聚集数与本征胶束聚集数. 实验结果表明, 与普通表面活性剂相比, 由于丙烯酰胺型阴离子表面活性单体分子中具有两个亲水头基, 在水中的溶解性能较强, 故具有较低的Krafft温度; 在溶液表面的饱和吸附量低, 故降低水表面张力的能力较差, 即表面活性差; 疏水缔合的胶团较为疏松, 故聚集数很小; 胶束内分子间的疏水相互作用较弱, 故临界胶束浓度CMC较高.     

Local dynamics of micelles of new long-chain surfactants in aqueous media

The molecular dynamics, organization, and phase state of aqueous solutions of new long-chain cationic surfactants with saturated hydrocarbon radicals (from C₁₆ to C₂₂) containing one or two hydroxyl groups in their polar heads are studied by the spin-probe EPR spectroscopy. In the region of micellar solutions, local mobility of surfactant molecules slightly changes with an increase in the length of hydrocarbon radical, whereas the order parameter of micelles increases notably. The addition of two hydroxyl groups to the polar part of long-chain (C ₂₂) surfactant molecule considerably decreases local mobility and increases the ordering of micellar system compared to the micelles of analogous surfactant with one hydroxyl group. Phase transition from micellar to a solid state is observed in this system with a decrease in temperature. The addition of KCl to aqueous surfactant solution lowers the local mobility, increases the order parameter of micelles, and can cause changes in the phase state of a system. In the presence of salt, the correlation time of probe rotation and its order parameter depend on surfactant concentration. Apparently, this is explained by changes in the shape of micelles upon variations in surfactant concentration.     

Mixed self-assembly of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers and sodium dodecyl sulfate in aqueous solution

Interaction of amphiphilic poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers with anionic sodium dodecyl sulfate (SDS) has been investigated in aqueous solution. Formation of mixed micelles has been confirmed by surface tension measurements, whereas the influence of the surfactant on the copolymer self-assembling has been studied by measurement of the 1H NMR self-diffusion coefficients and by small-angle neutron scattering. As a rule, the surfactant decreases the heterogeneity of the micellar structures formed by the copolymer in water. Moreover, increasing the content of SDS results in the increasingly more important extension of the poly(ethylene oxide) (PEO) corona chains and the copolymer micelle deaggregation. The stability of the micelles against SDS increases with the length of the hydrophobic block. Preliminary two-dimensional NMR measurements with nuclear Overhauser enhancement have confirmed the spatial vicinity between SDS and the constitutive blocks of the copolymer.