Spectroscopic analysis of naphtholazobenzimidazole in organised solution

Micelle–water partition coefficient (K_x ) of naphtholazobenzimidazole dye (NAB) in aqueous solutions of cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulphate (SDS) has been determined spectrophotometerically. Changes in absorption patterns of dye caused by surfactants and solvents were quantified in terms of dye–surfactant ratio (n _D/n _S) and solvent water partition coefficients (P), respectively. Multiple residence sites have been suggested for dye molecules within micelles, based on shifts in azo-hydrazone tautomeric equilibrium. Micelle–water partition coefficients were used to evaluate the influence of dye on critical micelle concentration of CTAB and SDS. At same micelle concentration, M, the relative solubility of NAB was greater in cationic surfactant CTAB than in anionic surfactant SDS.     

Study of Partitioning and Solubilization of Some New Chalcones Between Aqueous and Micellar Phases

The partitioning behavior of four newly synthesized chalcones between aqueous and micellar phases of ionic surfactants (SDS and CTAB) was investigated using ultraviolet-visible spectroscopy. The simple absorption spectra were recorded to study the interaction between these drugs and surfactants (in the concentration range below critical micelle concentration to above critical micelle concentration). The absorption data is also used to determine the number of additive molecules incorporated per micelle of the surfactant. The partition coefficient (K_x) of additives between bulk water phase and the micellar phase was determined in the range of 5.52 × 10⁺⁴ to 5.06 × 10⁺⁵ at 298 K by differential spectroscopic method. The corresponding standard free energy of partition ΔG°_p obtained was in the range of ?27.05 kJmol^?1 to ?32.54 kJmol^?1. The relative solubility of additives between aqueous and micellar phases in different micellar concentrations was also estimated. The results showed that the chalcones are preferably soluble in cationic surfactant micelles.     

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

A UV-Visible Study of Partitioning of Pyrene in an Anionic Surfactant Sodium Dodecyl Sulfate

The interaction of hydrophobic dye pyrene with sodium dodecyl sulphate (SDS), an anionic surfactant, was studied in the process of solubilization. Difference UV-Visible spectroscopy was used to carry out the study. The partition coefficient (K_x), and number of dye molecules incorporated per micelle (n) was calculated. High K_x value shows that pyrene is partitioned strongly from polar to nonpolar environment. Steady-state fluorescence spectroscopy is used to check the environment of the pyrene as it is a well-known fluorescent probe. Onset of slope in curves is used to determine the critical micelle concentration (CMC).     

Spectrophotometric studies on the interactions of C.I. Basic Red 9 and C.I. Acid Blue 25 with hexadecyltrimethylammonium bromide in cationic surfactant micelles

Interactions between cationic dye-cationic surfactant and anionic dye-cationic surfactant systems were investigated in aqueous solutions using spectrophotometric method at 288.15, 298.15, 308.15 and 318.15 K. C.I. Basic Red 9 (BR9) and C.I. Acid Blue 25 (AB25) were used as cationic and anionic dyes, respectively, and hexadecyltrimethylammonium bromide (HDTMABr) was selected as cationic surfactant in this study. Although there was an interaction between the AB25 and the HDTMABr molecules, an interaction between the BR9 and HDTMABr did not occur due to the electrostatic repulsion forces. Binding constants and partition coefficients between the micellar and the bulk water phases for the AB25-HDTMABr system were calculated from the changes in absorbance values and the critical micelle concentrations at different temperatures. It was found that the values of binding constant and partition coefficient decreased with increasing temperature. Thermodynamic parameters (ΔG⁰, ΔH⁰ and ΔS⁰) were determined for the binding and partition processes of AB25-HDTMABr system. It was concluded from ΔG⁰ values that the binding of AB25 to HDTMABr occurred spontaneously. In addition, the binding and partition processes were exothermic.     

Surface activity—thermodynamic properties and light scattering studies for some novel aliphatic polyester surfactants

The preparation of 12 new polyester surfactants based on aliphatic amines and different ethylene oxide content is described. These surfactants were characterized by determining their molecular weights and polydispersity by gel permeation chromatography (GPC) and nitrogen content. Drop volume tensiometry (DVT) was used to measure the surface tension at 25, 35, 45 and 55°C. The surface tension isotherms were used to determine critical micelle concentration (CMC), maximum Gibb's adsorption (Γ_max), minimum area per molecule (A_min), the effectiveness of surface tension reduction (π_cmc) and the efficiency (pC₂₀). The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic, ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad, ΔS_ad) were calculated and the data showed that these surfactants favor micellization to adsorption. The static scattered light intensity measurements provide the calculation of the molecular weight of micelle and the aggregation number (N°), while the dynamic light scattering provide the hydrodynamic radius of micelle (R_H) and the diffusion coefficient at different surfactant concentrations. The hydrodynamic radius of micelle (R_H) at different surfactant concentrations could be used also to determine the CMC giving results that are comparable to those obtained by surface tension measurements. All the data are discussed regarding the chemical structure of the polymeric surfactants. Copyright © 2004 John Wiley & Sons, Ltd.     

Hydrophobic effect for anionic dye - cationic surfactant interaction in aqueous and mixed solvent

Abstract

The interaction between anionic dyes [Reactive Orange 122 (R.O 122), Reactive Blue 19 (R.B 19), Reactive Violet 5 (R.V 5) and Acid Green 20 (A.G 20)] with cationic surfactant cetyltrimethylammoniun bromide (CTAB) has been investigated by spectrophotometry and conductance technique. The used dyes are characterized by tautomeric behavior which affects the mechanism of the interaction. Various parameters such as dye structure, surfactant composition, solvent composition, temperature and pH of the medium were studied. The spectral data were applied for calculating the binding constant between dye and surfactant (K_b), fraction of micellization (?_mic), and standard free energy change of binding (ΔG°_b) in 0,10,20 and 30 v/v % acetonitile (AN). Conductance technique was constructed to estimate the ion pairing constant (K_a) at different temperatures and v/v % AN. Thermodynamic parameters (ΔG°, ΔH° and ΔS°) for ion pair formation were evaluated. The role of hydrophobic and electrostatic effect on dye-surfactant interaction was discussed.     

Hexadecyltrimethylammonium bromide micellization in glycine,diglycine, and triglycine aqueous solutions as a function of surfactant concentration and temperatures

Micellization behavior of hexadecyltrimethylammonium bromide (HTAB) was investigated conductometrically in aqueous solutions containing 0.02 mol kg^?1glycine (Gly), diglycine (Gly-Gly), and triglycine (Gly-Gly-Gly) as a function of surfactant concentration at different temperatures. The critical micelle concentration (CMC) of HTAB exhibits a decreasing trend as the number of carbon atoms increases from Gly to Gly-Gly-Gly, favoring the micelle formation. The values of CMC and the degree of counterion dissociation of the micelles were utilized to evaluate the standard free energy for transferring the surfactant hydrophobic chain out of the solvent to the interior of the micelle, ΔG _HP ^○ , free energy associated with the surface contributions, ΔG _S ^○ , standard free energy, ΔG _m ^○ , enthalpy, ΔH _m ^○ , and entropy, ΔS _m ^○ of micellization were also calculated. The results show that the micellization of HTAB in aqueous solutions as well as in aqueous Gly/Gly-Gly/Gly-Gly-Gly solutions is primarily governed by the entropy gain due to the transfer of the hydrophobic groups of the surfactant from the solvent to the interior part of the micelle. The CMC obtained by fluorometric method is in close agreement with those obtained conductometrically. Furthermore, decrease in the I ₁/I ₃ ratio of pyrene fluorescence intensity suggests the solubilization of the additives by the surfactant micelles and that this solubilization increases as the hydrophobicity increases from Gly to Gly-Gly-Gly.     

Physicochemical Properties and Surface Tension Prediction of Mixed Surfactant Systems: Triton X‐100 with Dodecylpyridinium Bromide and Triton X‐100 with Sodium Dodecylsulfonate

Dependences of the surface tension of aqueous solutions of ionic (dodecylpyridinium bromide, sodium dodecylsulfonate) and nonionic (Triton X‐100) surfactants and their mixtures on total surfactant concentration and solution composition were studied, and the surface tension of the mixed systems were predicted using different Miller's model. It was found that how to select the model for calculation of ω is corresponding to the degree of the deviation from the ideality during the adsorption of mixed surfactants. The compositions of micelles and adsorption layers at air‐solution interface as well as parameters (β^m, β^ads) of headgroup‐headgroup interaction between the molecules of ionic and nonionic surfactants were calculated based on Rubingh model. The parameters (B₁) of chain‐chain interaction between the molecules of ionic and nonionic surfactants were calculated based on Maeda model. The free energy of micellization calculated from the phase separation model (ΔG ₂ ^m ), and by Maeda's method (ΔG ₁ ^m ) agree reasonably well at high content of nonionic surfactant. The excess free energy ΔG _ads ^E and ΔG _m ^E (except α=0.4) for TX‐100/SDSn system are more negative than that TX‐100/DDPB system. These can be probably explained with the EO groups of TX‐100 surfactant carrying partial positive charge.     

Physicochemical investigation of sulfonamide-derived compounds interacting with conventional cationic surfactants in aqueous media

The sulfonamide core in compounds is effective synthons, which offer exciting perspectives in chemotherapeutic and pharmacological research. In this study, we investigated the molecular interaction of potent sulfonamide derivatives (SDs), 2-benzenesulfonamido-3-methylbutyric acid (BSB) and tetraaquabis{3-methyl-2-[(phenylsulfonyl)amino]butanoate}copper(II) (Cu-BSB), with cationic surfactants, cetyltrimethyl ammonium bromide (CTAB) and ethylhexadecyl dimethyl ammonium bromide (EHDAB), using UV-visible spectroscopy and steady-state fluorescence measurements. Various mathematical models were applied to quantify the effect of cationic surfactants on physicochemical characteristics of BSB and Cu-BSB. These interactions were confirmed by estimating the partition coefficient (K_x), binding capacities (K_b), Stern-Volmer quenching constant (K_sv), and related Gibbs free energies (ΔG_b). The in-depth mechanism revealed that the binding mode in SD–surfactants combinational system is spontaneous and quenching exists in static mode initiated by ground-state complex formation. We believe that the true knowledge of host–guest interaction mechanisms concerning model membrane with entrapped moiety can help in better understanding of molecular recognition in related phospholipid membrane models.     

Micellar parameters of diblock copolymers and their interactions with ionic surfactants

The interactions of non-ionic amphiphilic diblock copolymer poly（oxyethylene/oxybutylene）(E₃₉B₁₈) with anionic surfactant sodium dodecyl sulphate（SDS） and cationic surfactant hexadecyltrimethylammonium bromide（CTAB） were studied by using various techniques such as surface tension,conductivity,steady-state fluorescence and dynamic light scattering.Surface tension measurements were used to determine the critical micelle concentration（CMC） and thereby the free energy of micellization(△G_mic),free energy of adsorption(△G_ads),surface excess concentration（Γ） and minimum area per molecule（A）.Conductivity measurements were used to determine the critical micelle concentration（CMC）,critical aggregation concentration（CAC）,polymer saturation point（PSP）,degree of ionization（α） and counter ion binding（β）. Dynamic light scattering experiments were performed to check the changes in physiochemical properties of the block copolymer micelles taken place due to the interactions of diblock copolymers with ionic surfactants.The ratio of the first and third vibronic peaks（I₁/I₃） indicated the polarity of the pyrene micro environment and was used for the detection of micelle as well as polymer-surfactant interactions.Aggregation number（N）,number of binding sites（n） and free energy of binding （△G_b） for pure surfactants as well as for polymer-surfactant mixed micellar systems were determined by the fluorescence quenching method.     

Factors influencing the mechanism of surfactant catalyzed reaction of vitamin C-ferric chloride hexahydrate system

The kinetics of vitamin C by ferric chloride hexahydrate has been investigated in the aqueous ethanol solution of basic surfactant viz. octadecylamine (ODA) under pseudo-first order conditions. The critical micelle concentration (CMC) of surfactant was determined by surface tension measurement. The effect of pH (2.5–4.5) and temperature (15–35°C) in the presence and absence of surfactant were investigated. Activation parameters, ΔE _a, ΔH ^#, ΔS ^#, ΔG ^≠, for the reaction were calculated by using Arrhenius and Eyring plot. Surface excess concentration (Γ_max), minimum area per surfactant molecule (A _min), average area occupied by each molecule of surfactant (a), surface pressure at the CMC (Π_max), Gibb’s energy of micellization (ΔG _M°), Gibb’s energy of adsorption (ΔG _ad°), were calculated. It was found that the reaction in the presence of surfactant showed faster oxidation rate than the aqueous ethanol solution. Reaction mechanism has been deduced in the presence and absence of surfactant.     

Effective solubilization of chalcones in micellar phase: Conductivity and voltammetric study

The solubilization of four chalcones, between aqueous and micellar phases of ionic surfactants (SDS and CTAB), was investigated by conductivity and cyclic voltammetry (CV) techniques. From conductivity data, a decrease in the critical micellar concentration (CMC) of the surfactants, in presence of the chalcones was ascribed to the decreased charge density over the surfactants. The results were seconded by thermodynamic parameters including degree of ionization (α), counter ion binding (β), and standard Gibbs free energy of micellization (ΔG _m ^○ ). The added surfactant decreased the peak current of the oxidized chalcone and shifted the peak potential either positively (in presence of SDS) or negatively (in presence of CTAB). The effect is rationalized as chalcone-surfactant interaction and quantitated as binding constant (K _b) assorting values from 8.78 to 552.97 M^?1. The preferred solubilization of the chalcones in the micellar phase has been inferred.     

CETYLPYRIDINIUM CHLORIDE + TETRADECYLTRIMETHYLAMMONIUM BROMIDE MIXED MICELLES IN POLYETHYLENE GLYCOL 1000 + WATER MIXTURES*

The conductances of cetylpyridinium chloride (CPyCl) + tetradecyltrimethylammonium bromide (TTAB) mixtures over the entire mole fraction range of CPyCl (x_CPyCl) were measured in aqueous binary mixtures of polyethylene glycol 1000 (PEG 1000) containing 0.5, 1, 2, 5 and 10 wt% of PEG 1000 at 30°C. From the conductivity data, the critical micellar concentration (cmc), degree of counter ion association (χ) and the standard free energy of micelle formation (ΔG^o _M ) of CPyCl and TTAB were computed. The DG^o _M value is further divided into the hydrophobic contribution of free energy of transfer of the surfactant hydrocarbon chain from the medium to the micelle (ΔG^o _HP ), and the energy associated with the surface contributions (ΔG^o _s ) consisting of electrostatic interactions between the head groups and counter ions. Both contributions show a linear dependence on the amount of PEG additive. These results have been explained on the basis of the medium effects of aqueous PEG.

The mixed micelle formation by CPyCl+TTAB show non-ideal behavior which is quite similar in the absence, as well as in the presence, of PEG additive as evaluated by using the regular solution theory. The interaction parameter, b, is always negative and remains almost constant with respect to the amount of PEG additive. This indicates that the mixed micelle formation occurs mainly due to the synergistic interactions between the unlike surfactant monomers only.     

Effect of Association of Bromophenol Blue with Tween Surfactants on Its Acid-Base Equilibria at High pH

The acid base equilibria of the sulfonephthalein dye bromophenol blue (BPB) in aqueous nonionic micellar solutions of Tween 20, Tween 40, Tween 60, and Tween 80 have been investigated spectroscopically using a partition equilibrium method. A visible red shift in the absorbance of the basic form of the dye with increase in surfactant concentration was observed at and above pH 6.98. This has been attributed to the stabilization of the acid form of the dye by the POE groups on the head of the surfactant monomers. Such stabilization effect was found to decreases with decrease in the number of carbon atom in the hydrophobic tail and with the increase in the hydrophile-lipophile balance (HLB) of the surfactant molecule. The equilibrium constant of the partition of the dyes between micellar and aqueous pseudophases (K_ass) was found to increase with the surfactants in the order Tween 80 < Tween 60 < Tween 40 < Tween 20. The pK_a2 of the dyes were predicted and found to be in good agreement with the experimental values.     

Micellization of anionic gemini surfactants and their interaction with polyacrylamide

A series of anionic gemini surfactants have been synthesized. The surface properties and micellization process of as-prepared sulfonate gemini surfactants (SGS) and carboxylate gemini surfactant (CGS) have been studied by surface tension measurement and isothermal titration microcalorimetry. Meanwhile, the interaction of these five surfactants with polyacrylamide (PAM) was investigated using surface tension, steady-state fluorescence measurement, and isothermal titration microcalorimetry. The results show that the critical micelle concentrations (CMCs) of above-mentioned surfactants are more than 1 order of magnitude lower than those of corresponding single chain surfactants. Moreover, the enthalpy of micelle formation (ΔH _mic) for the investigated gemini surfactants is negative. In the surfactant–PAM systems, the thermodynamic parameters of binding have also been determined. The conclusion may be drawn that the binding strength of SGS onto PAM is stronger than that of CGS, resulting from more compact structure of SGS aggregates. With increasing surfactant hydrophobicity, the values of ΔH _agg become more exothermic and a ΔS _agg decrease was observed. Therefore, the interaction between SGS and PAM is enthalpy-driven.     

Synthesis,Crystal Structure,Spectral and Thermodynamic Properties of One Benzoindole Pentamethine Cyanine Dye

One benzoindole pentamethine cyanine dye was synthesized and characterized by ¹H NMR, IR, MS and UV‐Vis spectra. The UV‐Vis absorption and fluorescence spectra of the dye in chloroform, dimethyl sulfoxide, acetone, ethanol and methanol were investigated, and the λ_max of the dye was in the region 682.0–689.0 nm with large molar extinction coefficients (? > 10⁵ M^?1cm^?1) in different solvents. The structure of the dye was also characterized and analyzed by X‐ray diffraction. Crystallographic data revealed that the dye belonged to orthorhombic, with space group P2₁2₁2₁, a = 10.059(2) Å, b = 15.098(4) Å, c = 24.989(6) Å, V = 3794.8(15) ų, Z = 4. The C‐H···F intermolecular hydrogen bonds were displayed in the molecular system, which were effective in the molecular packing. The aggregation behavior and thermodynamic properties of the dye in aqueous methanol solution were also studied by means of UV‐Vis spectroscopy methods. The results indicated that the dye existed monomer‐dimer equilibrium in aqueous methanol solutions. The fundamental properties of the dye, such as the dimeric association constant K_D, the dimeric free energy ΔG_D, the dimeric entropy ΔS_D, and the dimeric enthalpy ΔH_D were determined. The ΔH_D of the dye was –46.0 kJ mol^?1.     

DNA与金属锇配合物相互作用的表面电化学研究

采用自己建立的DNA表面电化学研究微量方法, 研究了单双链DNA与两种锇配合物(联吡啶锇和二氯菲咯啉锇)的相互作用. 研究发现, 两种锇配合物都是通过静电作用与DNA结合, 其作用方式不受溶液离子强度的影响. 并计算得到了联吡啶锇和二氯菲咯啉锇与dsDNA和ssDNA相互作用的多个热力学和动力学参数, 如结合常数K_3＋或K_2＋, 结合常数比K_3＋/K_2＋, 离子强度为零时的极限比 , 结合自由能ΔG_b, 解离速度常数k, 结合位点数s.     

Aggregation behavior of naphthalimide fluorescent surfactants in aqueous solution

A group of novel fluorescent surfactants, N-n-alkyl-4-(1-methylpiperazine)-1,8-naphthalimide iodine [C_nndi]I (n?=?8, 10, and 12), have been synthesized and their aggregation behavior in aqueous solution have been explored by surface tension, electric conductivity, hydrogen-1 NMR spectra, absorption, and fluorescence spectra. Compared with traditional cationic surfactants, the [C_nndi]I have a rather lower critical micelle concentration and higher surface activity. Absorption and fluorescence spectra were proved to be facile method to monitor directly the aggregation states of fluorescent surfactant molecules in solution and revealed clearly the formation of face-to-face stacked structure of the [C_nndi]I molecules driven by the π–π interactions. The micelle formation process for [C_nndi]I was demonstrated to be enthalpy-driven in the temperature range investigated. Possible aggregation process was given based on the experimental results. The combination of dye and surfactant provides a way for monitoring the formation process of micelle directly by fluorescence spectra.     

Sorption/diffusion behaviour of anionic surfactants in polyacrylamide hydrogels: from experiment to modelling

The sorption and diffusion processes of anionic surfactants with different chain length through polyacrylamide hydrogels with low swelling degree have been studied by electrical conductivity measurements. The multicomponent equilibrium equation has been used to model the sorption isotherms of different anionic surfactant in the hydrogels. Such isotherms show that initial rapid sorption of unimer surfactant into the membranes occurs, suggesting that non-freezing water can be involved in these interactions. In aqueous solution, at concentrations near and above the critical micelle concentration an anti-co-operative region is found. The diffusion coefficients of the anionic surfactants inside the hydrogel matrix show that the mobility of diffusing surfactant entities is dependent on cross-linker concentration and chain length. The Cukier hydrodynamic model and the free volume theory as modified by Peppas and Reinhart were applied to explain the dependence of the diffusion coefficients of surfactant on surfactant concentration inside the hydrogel. The hydrodynamic model was applied with success to the more hydrophilic surfactant, sodium 1-octanesulfonate, showing that the diffusion coefficients, D, increase when the resistance to hydrodynamic medium decreases; when the surfactant chain length increases (sodium dodecyl sulfate and sodium 1-hexadecane sulphonate) the variation of D with the free volume can only be understood considering the sieving effect produced by the surfactant inside gel.