SnO2/TiO2复合纳米纤维的制备及光催化性能

采用静电纺丝技术,以聚乙烯吡咯烷酮和钛酸正丁酯为前驱体,制得锐钛矿相TiO2纳米纤维。以TiO2纳米纤维为模板,通过水热合成法,制备了具有异质结构的SnO2/TiO2复合纳米纤维。利用扫描电镜(SEM)、X射线能量色散光谱（EDS）、透射电镜(TEM)和X射线衍射(XRD)等分析测试手段对其形貌和结构进行了表征,结果表明,SnO2纳米粒子均匀地生长在TiO2纳米纤维表面,形成了异质结构的SnO2/TiO2复合纳米纤维材料。通过改变反应物浓度,能有效地实现SnO2/TiO2复合纳米纤维的可控合成。以罗丹明B为模拟污染物,考察了SnO2/TiO2复合纳米纤维的光催化性能,与纯TiO2纳米纤维相比光催化活性明显提高,初步探讨了光催化反应机理。     

Transferring CdTe Nanoparticles from Liquid Phase to Polyvinylpyrrolidone Nanofibers by Electrospinning and Detecting Its Photoluminesccnce Property

The major aim of this work was to synthesize thio-stabilized CdTe nanoparticles（NPs） in an aqueous solution, which was then enwrapped with cetyltrimethylammonium bromide（CTAB）, and finally transferred to the polyvinylpyrrolidone（PVP） matrix by electrospinning. The PVP nanofibers containing CdTe NPs were characterized by scanning electron microscopy（SEM） and transmission electron microscopy（TEM）, to observe the morphology of the nanofibers and the distribution of CdTe NPs. The selective area electronic diffraction（SAED） pattern verified that CdTe NPs were cubic lattice. The photoluminescence（PL） spectrum indicated that CdTe NPs existed in an optical style in PVP nanofibers. Moreover, X-ray photoelectron spectra（XPS） revealed that thiol-stabilized CdTe NPs were enwrapped by CTAB, and PVP acted as a dispersant in the process of electrospinning.     

Transferring CdTe Nanoparticles from Liquid Phase to Polyvinylpyrrolidone Nanofibers by Electrospinning and Detecting Its Photoluminescence Property

The major aim of this work was to synthesize thio-stabilized CdTe nanoparticles(NPs) in an aqueous solution,which was then enwrapped with cetyltrimethylammonium bromide(CTAB),and finally transferred to the polyvinylpyrrolidone(PVP) matrix by electrospinning,The PVP nanofibers containing CdTe NPs were characterized by scanning electron microscopy(SEM) and transmission electron microscopy(TEM),to observe the morphology of the nanofibers and the distribution of CdTe NPs,The selective area electronic diffraction(SAED) pattern verified that CdTe NPs were cubic lattice,The photoluminescence(PL) spectrum indicated that CdTe NPs existed in an optical style in PVP nanofibers,Moreover,X-ray photoelectron spectra(XPS) revealed that thiol-stabilized CdTe NPs were enwrapped by CTAB,and PVP acted as a dispersant in the process of electrospinning.     

Surfactant-free fabrication of Cu2O nanosheets from Cu colloids and their tunable optical properties

Novel sheetlike Cu₂O two-dimensional (2D) nanoarchitectures were successfully synthesized via a copper nanoparticle-mediated process for the first time. Uniform and nearly monodisperse Cu nanocolloids were firstly synthesized by disproportionating reaction of Cu⁺ at the surfactant-free ambient conditions, and Cu₂O nanosheets were subsequently synthesized by choosing ethanol solvent agent to limit the oxidized processes of Cu nanocolloids. The synthesized products were systematically studied by X-ray powder diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV-vis absorption spectra. It was demonstrated that the solvent agent of ethanol played key roles in the formation of the as-synthesized nanosheets. By choosing the different solvent agents to limit the oxidized processes, Cu₂O nanospheres and nanocubes can be selectively synthesized accordingly.     

微观尺度高分子协同组装ZnO纳米片

以醇水混合体系作为反应介质,六水合硝酸锌和尿素为原料,聚乙烯吡咯烷酮(PVP)作为模板剂,经水热过程合成了由纳米片组装的花状微球碱式碳酸锌前驱体,经热处理得到相应的氧化锌(ZnO)产物。采用X射线衍射(XRD)和环境扫描电镜(SEM)对样品进行了表征,结果表明产物为六方纤维矿结构的ZnO,单分散花状微球直径约为2 μm,尺寸均一,组装成微球的纳米片构筑单元厚度为20 nm。红外分析表明PVP与Zn²⁺之间的化学配位作用发生在侧环的内酰基C=O键上的O位与Zn²⁺之间,研究表明PVP用量影响组装过程,在相同实验条件下,用聚乙二醇(PEG)代替PVP的模板作用,得到了粒径较大的纳米片组装的微球(φ～15 μm),在此基础上探讨了高分子结构对晶体生长和组装机制的影响。     

ZnO纳米片/微棒复合体的制备、结构及光学性能

以十六烷基三甲基溴化铵(CTAB)为表面活性剂,以氯化锌和氢氧化钠为原料,在低温水热条件下制备出具有纳米片状接枝结构的ZnO微棒。通过扫描电镜(SEM)、X射线衍射(XRD)、透射电镜(TEM)、光致发光(PL)和拉曼光谱(Raman)对产物的形貌、晶体结构和光学性能进行了表征。结果表明,表面活性剂CTAB对产物最终形貌的形成具有重要作用;微棒表面所接枝的薄片为多晶结构;产物光致发光峰是较少见的弱蓝光发射与强红光发射;同时对这种ZnO微棒的生长机理进行了探讨。     

CuCo/BNNSs纳米催化剂对固态储氢材料氨硼烷水解的催化性能

采用共还原法将CuCo双金属负载到通过聚乙烯吡咯烷酮(PVP)辅助离子插层法制备的少层氮化硼纳米片(BNNSs)上,获得了平均粒径为2.7 nm且高度分散的铜钴/氮化硼纳米片(CuCo/BNNSs)纳米催化剂。通过原子力显微镜(AFM)、X射线衍射(XRD)、傅里叶转换红外光谱(FTIR)、拉曼光谱(Raman)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)和高分辨率透射电镜(HRTEM)对载体及催化剂的结构及形貌进行表征,并研究了CuCo/BNNSs的催化性能。研究发现,由于Cu、Co、BNNSs和OH-之间高效的四重效应协同使得Cu0.5Co0.5/BNNSs纳米催化剂在室温、pH=14条件下对氨硼烷(AB,NH3BH3)水解释氢具有极高的催化活性。转化频率(TOF)值达到104.52 molH2·molmetal^-1·min^-1,且CuCo/BNNSs纳米催化剂具有良好的稳定性,6次循环利用后仍保持较高催化活性。     

Fabrication of hierarchically porous silica nanospheres through sol–gel process and pseudomorphic transformation

Hierarchically porous silica nanospheres with well-defined morphology and uniform particle size had been synthesized through a multistep sol–gel method combined with pseudomorphic transformation in the presence of polyvinylpyrrolidone (PVP) and cetyltrimethylammoium bromide (CTAB) as dual template. The prepared materials were characterized by small-angle X-ray diffraction, transmission electron microscopy, scanning electron microscopy, and nitrogen physical adsorption techniques. The preparation process and the origin of hierarchical structure were also investigated. It had been shown that the hierarchical structure of synthesized materials comprises wormlike framework mesopores with diameters of about 3 nm and bubble-like pores with diameters of 20–30 nm. CTAB and PVP behave as dual-template and are responsible for the formation of the mesopores and big pores, respectively. Not only the porous structure, but also the morphology and particle size of hierarchical materials can be adjusted by controlling the addition of PVP. In addition, the formation process of hierarchically porous silica was investigated by transmission electron microscopy, FT-IR spectra and thermo-gravimetric curves and a possible synthetic mechanism had been proposed.     

Synthesis of colloidal nanoscaled copper-indium-gallium-selenide (CIGS) particles for photovoltaic applications

In this work, Cu(In,Ga)Se(2) (CIGS) nanoparticles were synthesized using a wet chemical method. The method is based on a non-vacuum thermal process that does not use selenization. The effects of temperature, source materials, and growth conditions on the phase and particle size were investigated. X-ray diffraction results confirm the formation of a tetragonal CIGS structure as the main phase with the purity more than 99% obtained by energy-dispersive X-ray spectroscopy (EDX). The morphology and size of the samples were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Using these methods, 20-80nm particles were obtained. Through measurements of the absorption spectra of CIGS nanoparticles, the band gap of the synthesized material was determined to be about 1.44eV, which corresponds to an acceptable wavelength region for absorber layers in solar cells.     

Controlled fabrication of highly oriented ZnO microrod/microtube arrays on a zinc substrate and their photoluminescence properties

Well-aligned zinc oxide microrod and microtube arrays with high aspect ratios were fabricated on zinc foil by a simple solution-phase approach in an aqueous solution of ethylenediamine (en). The shape of the ZnO microstructures can be easily modulated from rods to tubes by adding cetyl trimethyl ammonium bromide (CTAB) into the reaction system. Control experiments demonstrate that some reaction parameters, such as the concentration of ethylenediamine, the kind of surfactant, reaction time, and the temperature, all have direct influences on the morphology of the products. Based on the early structure arising from arrested growth (nanosheets), a reasonable mechanism for the growth of ZnO microrods and microtubes has been proposed. The products were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and photoluminescence emission.     

Mercury selenide nanorods: Synthesis and characterization via a simple hydrothermal method

HgSe nanorods have been synthesized through a simple hydrothermal reduction approach. The nanorods formed were ≈45 nm average diameter and ≈3 μm nm in length. X-ray diffraction characterization suggested that the product consists of cubic phase pure HgSe. The as-prepared products were also characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). An X-ray energy dispersive spectroscopy (EDX) study further confirmed the composition and purity of the product. The synthesis procedure is simple and uses less toxic reagents than the previously reported methods. The results showed that the capping agent CTAB (cetyltrimethylammoniumbromide) plays a crucial role in the process. Other factors, such as the reaction time, temperature, different capping agent and the reductant type also have an influence on the morphology of the final products to some extent.     

Influence of surfactants on the morphologies of CaCO3 by carbonation route with compressed CO2

Three surfactants, sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB) and polyoxyethylene-80-sorbitan monooleate (Tween 80), were used to control the growth of CaCO₃ crystals by carbonation route using Ca(OH)₂ and compressed CO₂. The obtained CaCO₃ particles were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. The effects of surfactants on the morphology of the particles were studied. It was demonstrated that Tween 80 and SDS have obvious effect on the morphology of CaCO₃ particles, while CTAB does not affect morphology considerably. The possible mechanism has been discussed on the basis of the binding of the surfactants to the certain face of the crystals.     

Ag2S/Al2O3纳米复合物的水热合成及表征

采用水热技术结合煅烧的方法,成功制备了Ag2S/Al2O3纳米复合物。 通过SEM、EDX、XRD等测试技术对产品进行了表征,证明得到的产品是Ag2S/Al2O3纳米复合物;无孔Al2O3和多孔Al2O3作反应模板得到的复合物的形态和分布不同。     

Polyvinylpyrrolidone-assisted growth and optical properties of ZnO hexagonal bilayer disk-like microstructures

ZnO hexagonal bilayer disk-like microstructures are successfully prepared assisted with polyvinylpyrrolidone (PVP), and the photoluminescence (PL) spectrum of as-prepared ZnO samples showed a very strong ultraviolet (UV) emission at the UV region.     

Facile hydrothermal synthesis of 3D hierarchical Bi2SiO5 nanoflowers and their luminescent properties

Facile hydrothermal synthesis of novel hierarchical flowerlike Bi₂SiO₅ nanostructures consisting of single-crystal nanosheets is reported using polyvinylpyrrolidone (PVP, K30) as capping reagent in the presence of NaOH. The obtained products are systematically characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and Fourier transform infrared spectroscopy. Control experiments are carried out to investigate various factors that affect the morphology and size of the products. The results indicate that the nucleation and growth of the flowerlike nanostructures are dominated by a nucleation–dissolution–recrystallization growth mechanism. It is demonstrated that the concentrations of PVP and NaOH play important roles in the formation of the hierarchical nanoflowers. Moreover, the room-temperature photoluminescence properties of the Bi₂SiO₅ nanoflowers are also investigated.     

球磨-溶剂热诱导法合成WS2纳米棒及其摩擦性能

采用行星式高能球磨机，将WS₂与S粉末混合球磨，得到纳米片状结构的前驱体，然后添加分散剂聚乙二醇(PEG)用溶剂热诱导的方法使纳米片状前驱体发生结构转变，制备了棒状结构的WS₂纳米材料。用XRD、SEM、TEM等方法对WS₂纳米棒进行了形貌和结构表征，并对其作为润滑油添加剂的摩擦性能进行了初步的研究。     

静电纺丝法制备铁酸锌中空纤维及其磁学性能

以锌盐、铁盐和聚乙烯吡咯烷酮(PVP)为原料,通过静电纺丝法先制备PVP/硝酸盐复合纤维,这些复合纤维以5℃·min-1的升温速率加热到500℃并保温3h,最终得到铁酸锌(ZnFe2O4)中空纤维.通过X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)以及振动样品磁强计(VSM)等分析手段对中空纤维的晶体结构、形貌和磁学性能进行了研究.结果显示,ZnFe2O4中空纤维属于尖晶石结构,高温处理后仍能保持一维结构,纤维直径在200-400nm之间,纤维壁由大小为25nm的颗粒堆积而成.室温磁化结果显示制备的ZnFe2O4中空纤维具有超顺磁性,在10kOe的磁化强度为2.03emu·g-1.     

Zn3(OH)2V2O7·2H2O纳米片的水热制备

采用硝酸锌、五氧化二钒和氢氧化钠作为反应物,通过一个简单的CTAB辅助的水热方法制备了Zn₃(OH)₂V₂O₇·2H₂O纳米片。运用XRD,ICP-AES,FTIR,HRTEM,EDS,FE-SEM对产物的晶相和形貌进行了表征。结果表明CTAB在控制产物的形貌、尺寸分布和自组装过程中起着关键作用。同时我们研究了产物的晶体生长行为和自组装过程。     

复合半导体MoS_2/Cu_2O的制备及其光催化性能研究

采用两步法制备了MoS_2/Cu_2O催化剂,对其催化降解甲基橙(MO)性能进行了研究.首先,通过液相剥离和梯度离心获得少数层MoS_2纳米片,然后采用水热还原法在MoS_2纳米片上合成Cu_2O纳米颗粒,形成MoS_2/Cu_2O复合半导体,并分别通过扫描电子显微镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)、UV-Vis紫外可见漫反射光谱(DRS)等手段对催化剂的结构进行表征.在可见光下,MoS_2/Cu_2O复合半导体降解MO的效率明显高于纯MoS_2和Cu_2O.为了获得最佳光催化活性,探究了MoS_2质量分数(5%、10%、20%、30%、40%、50%)对MoS_2/Cu_2O复合半导体光催化降解MO的影响.最后,经过5次循环实验,MoS_2/Cu_2O降解率下降为82.5%,循环稳定性有待进一步提高.     

A Solvothermal Route to Cu2O Nanocubes and Cu Nanoparticles

IntroductionSynthesis of Cu2O and Cu nanostructures has beenactively researched for many decades because bothCu2O and Cu are important industrial materials on ac-count of their novel physical and chemical properties.In particular,Cu2O is a p-type metal ox…