Telechelic,Antimicrobial Hydrophilic Polycations with Two Modes of Action

Telechelic antimicrobial poly(2‐oxazoline)s with quaternary ammonium (quat) end groups are shown to be potent antimicrobial polymers against Gram‐positive bacterial strains. In this study, the activity against the Gram‐negative bacterium Escherichia coli is additionally implemented by hydrolyzing the poly(2‐methyl‐2‐oxazoline) with two quart end groups to poly(ethylene imine) (PEI). The resulting telechelic polycations are active against Staphylococcus aureus and E. coli. The contribution of the PEI backbone is determined by measuring the antimicrobial activity in the presence of calcium ions. The influence of PEI on the overall activity strongly depends on the molecular weight and increases with higher mass. The PEI dominates the activity against E. coli at lower masses than against S. aureus. The quart end groups require an alkyl substituent of dodecyl or longer to dominate the antimicrobial activity. Additionally, PEI and quart end groups act synergistically.     

New amphiphilic polyacrylamides: Synthesis and characterisation of pseudo-micellar organisation in aqueous media

In order to offer new tools for developing structure-property relationships for intramolecular associative polymers (polysoaps), the synthesis of three families of comb-like amphiphilic cationic polymers with great structure variability is described. These polymers with amphiphilic repeating units are polyacryl or methacrylamides laterally substituted by a group containing a quaternary ammonium site and a hydrophobic alkyl side chain with 10-16 carbon atoms. Two complementary synthesis methods were developed successfully. In the first method, the tertiary amine groups of neutral polymer precursors were quaternised with various n-alkyl bromides. Five polymers were obtained in this way. On the contrary, the second method consisted of synthesizing first amphiphilic cationic acryl or methacrylamide monomers. The 11 monomers thus obtained were then polymerised by conventional free radical polymerisation in solution. The polymers obtained by both methods only differed in their molecular weights, the second method leading to much higher molecular weights (up to 2 × 10⁶ g/mol). A preliminary investigation of the properties of a few of these polymers in solution showed interesting amphiphilic behaviour. The variation of the reduced viscosity of hydro-methanolic polymer solutions with polymer concentration revealed a strong intramolecular macromolecular folding. The microdomains corresponding to the intramolecular association of the hydrophobic alkyl side chains were eventually characterised by pyrene fluorescence spectroscopy. The local polarity of the pyrene probe was considerably lowered with respect to that of the surrounding aqueous phase and was dependent upon the macromolecular structure of the amphiphilic cationic polymers.     

Amphiphilic polymethacrylate derivatives as antimicrobial agents

We have investigated the structure-activity relationship of cationic amphiphilic polymethacrylate derivatives in antimicrobial and hemolytic assays. The polymers were prepared by radical copolymerizations of N-(tert-butoxycarbonyl)aminoethyl methacrylate and butyl methacrylate in the presence of methyl 3-mercaptopropionate as a chain transfer agent to give precursor polymers protected with a tert-butoxycarbonyl (Boc) group. Subsequent treatment of the Boc-protected polymers with TFA affords the desired cationic random copolymers. We examined antimicrobial and hemolytic activities of a series of polymers having a wide range of mole percentage of butyl groups (0-60%) in three different molecular weight (MW) ranges. The smallest polymers (MW < 2000) showed the lowest MIC and reduced hemolytic activity compared to that of the higher MW ones. In addition, polymers containing a high percentage of butyl groups are less selective for bacterial cells than their less hydrophobic counterparts.     

New poly(phenyleneethynylene)s with cationic,facially amphiphilic structures

Polymers based on meta substituted phenylene ethylene are prepared with patterned polar and nonpolar groups to favor an extended conformation. These polymers were characterized at the air-water interface by Langmuir techniques and found to form stable monolayers with an extended conformation based on molecular models. In addition, these polymers show phospholipid membrane activity as measured by induced leakage of calcein from large unilamellar vesicles. These polymers represent new facially amphiphilic structures which are cationic in nature and surface active.     

Strong ionic interactions in noncovalent complexes between poly(ethylene imine), a cationic electrolyte,and Cibacron Blue,a nucleotide mimic – implications for oligonucleotide vectors

Cationic polymers can bind DNA to form polyplexes, which are noncovalent complexes used for gene delivery into the targeted cells. For more insight on such biologically relevant systems, the noncovalent complexes between the cationic polymer poly(ethylene imine) (PEI) and the nucleotide mimicking dye Cibacron Blue F3G‐A (CB) were investigated using mass spectrometry methods. Two PEIs of low molecular weight were utilized (M_n ≈ 423 and 600 Da). The different types of CB anions produced by Na⁺/H⁺ exchanges on the three sulfonic acid groups of CB and their dehydrated counterparts were responsible for complex formation with PEI. The CB anions underwent noncovalent complex formation with protonated, but not with sodiated PEI. A higher proportion of cyclic oligomers were detected in PEI423 than PEI600, but both architectures formed association products with CB. Tandem mass spectrometry studies revealed a significantly stronger noncovalent interaction between PEI and dehydrated CB than between PEI and intact CB. Copyright © 2014 John Wiley & Sons, Ltd.     

The Role of Hydrophobicity in the Antimicrobial and Hemolytic Activities of Polymethacrylate Derivatives

We synthesized cationic random amphiphilic copolymers by radical copolymerization of methacrylate monomers with cationic or hydrophobic groups and evaluated their antimicrobial and hemolytic activities. The nature of the hydrophobic groups, and polymer composition and length were systematically varied to investigate how structural parameters affect polymer activity. This allowed us to obtain the optimal composition of polymers suitable to act as non-toxic antimicrobials as well as non-selective polymeric biocides. The antimicrobial activity depends sigmoidally on the mole fraction of hydrophobic groups (f_HB). The hemolytic activity increases as f_HB increases and levels off at high values of f_HB, especially for the high-molecular-weight polymers. Plots of HC₅₀ values versus the number of hydrophobic side chains in a polymer chain for each polymer series showed a good correlation and linear relationship in the log–log plots. We also developed a theoretical model to analyze the hemolytic activity of polymers and demonstrated that the hemolytic activity can be described as a balance of membrane binding of polymers through partitioning of hydrophobic side chains into lipid layers and the hydrophobic collapsing of polymer chains. The study on the membrane binding of dye-labeled polymers to large, unilamellar vesicles showed that the hydrophobicity of polymers enhances their binding to lipid bilayers and induces collapse of the polymer chain in solution, reducing the apparent affinity of polymers for the membranes.     

Covalently stabilized vesicles derived from amphiphilic multiarm star polymers: Preparation,characterization, and their capability of hosting different polarity of guests

The large amount of terminal hydroxyl groups of amphiphilic multiarm star copolymers with hyperbranched polyethylenimine (PEI) as the hydrophilic core and poly(ε‐caprolactone) (PCL) arms as the hydrophobic shell were completely transformed into the radical‐crosslinkable methacrylate (MA) groups. The resulting PEI‐b‐PCL‐MA polymers could self‐assemble into vesicles in water, which was verified by dynamic light scattering (DLS) and transmission electron microscopy (TEM). After crosslinking the intravesicular MA groups, covalently stabilized vesicles (CSVs) were generated. These CSVs were further characterized by DLS and TEM, and it was found that the corona of the vesicles was not the simple double‐layer structure, but contained a certain amount of PEI‐b‐PCL unimolecular micellar units between the double‐layer. These CSVs could accommodate both apolar and polar guests using their hydrophobic PCL zones and void cores, respectively. Moreover, these CSVs showed superior capacities for apolar guests to their noncrosslinked precursors and the corresponding traditional amphiphilic multishell star polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

AMINE FUNCTIONALIZED POLYETHERS AS BILE ACID SEQUESTRANTS: SYNTHESIS AND BIOLOGICAL EVALUATION

A series of amine functionalized polymers based on polyether backbones was prepared by the chemical modification of poly(epichlorohydrin) and poly(2-chloroethylvinyl ether). Nucleophilic substitution of pendant chloroalkyl groups offers a versatile route to prepare hydrophilic, cationic polymers. Through the choice of appropriate experimental conditions, including solvent, temperature, and amine reagent, a high degree of substitution at the chloromethyl groups can be achieved. Depending on the nature of the amine used, both water-soluble and amphiphilic cationic polymers were obtained. Crosslinked hydrogels were prepared by either subsequent crosslinking of the amine functional polyethers or by reaction of chloroalkyl polyethers with multifunctional amines. These amine functional polyethers exhibited promising bile acid sequestration properties during in vivo experiments using hamsters as animal models, providing a novel approach for treating hypercholesterolemia. Some of these polymers show efficacy superior to commercially available bile acid sequestrants. The results suggest that these novel polyammonium gels may be useful as cholesterol lowering agents.     

通过甲基丙烯酰胺侧基迈克尔加成制备阳离子聚碳酸酯

针对高分子量的聚乙烯亚胺(PEI)作为基因载体效率高但毒性大,而低分子量的聚乙烯亚胺虽毒性低但对基因的结合能力差、转染效率低的矛盾,设计合成了主链可生物降解而侧链带有胺类化合物的阳离子聚碳酸酯.首先,2-氨基-1,3-丙二醇和甲基丙烯酰氯反应制得2-(甲基丙烯酰胺基)-1,3-丙二醇,再用氯甲酸乙酯在室温下用三乙胺作碱...     

Synthesis and characterization of alkyl cellulose ω-carboxyesters for amorphous solid dispersion

Poor drug solubility and consequently poor bioavailability are major impediments to new drug innovation, and they limit the performance of many existing drugs. In recent years amorphous solid dispersion (ASD) has emerged as one of the most effective approaches for enhancing drug solution concentration, and thereby bioavailability, including in many marketed drug formulations. Recently efforts have been under way in several laboratories to design new ASD polymers, rather than relying on polymers that are already in FDA-approved formulations, but were not designed as ASD polymers. We describe here the design and synthesis of a new class of polymers, alkyl cellulose ω-carboxyesters, for ASD formulation. We synthesize these polymers by reaction of cellulose alkyl ethers with monoprotected (benzyl ester), monofunctional long chain acid chlorides, followed by protecting group removal using mild hydrogenolysis to form the target alkyl cellulose ω-carboxyalkanoate. These new amphiphilic polymers have high glass transition temperatures (T_g), tunable carboxyl content for controlling release pH and drug-polymer interactions, and certain members of this new group of amphiphilic cellulose ether esters are shown to be successful at forming ASDs with the important model drug ritonavir. These ASDs efficiently release ritonavir at small intestine pH, creating the maximum attainable amorphous solubility (20 μg/mL), and maintaining it for a time period substantially greater than the normal residence time in the absorptive region of the stomach and small intestine. Members of this new class of alkyl cellulose ω-carboxyester amphiphiles show significant potential as ASD polymers for enhancing oral bioavailability of otherwise poorly soluble drugs.     

Amphiphilic segmented polyurethanes as surface modifying additives

Amphiphilic segmented polyetherurethanes were prepared from methylene diphenylene diisocyanate (MDI), poly(ethylene glycol) 1500 (PEG), and a fatty acid monoglyceride as a chain extender. The polymers were not soluble in water or methanol, but dissolved readily in organic solvents. The amphiphilic properties were demonstrated as a large hysteresis in the water contact angles, exceeding 110°. The amphiphilic polymers were shown to modify the surface properties of a poly(ether urethane) (PEU) and a poly(ether urethane urea) (PEUU) when added in 1–10 wt %, presumably due to migration of the additive to the surface. The surfaces of particularly the PEU blends became highly amphiphilic, exhibiting contact angles hystereses up to 90–100°. A surface saturation effect was observed at 5% added amphiphilic polymer. A difference in the behavior of PEU and PEUU was ascribed to differences in solubility of the additive in the matrix. On long-term exposure to water the PEUU blends increased their amphiphilic behavior.     

Amine containing cationic methacrylate copolymers as efficient gene delivery vehicles to retinal epithelial cells

Non‐viral gene delivery vectors have emerged as potential alternatives in the field of gene therapy by replacing the biological viral vectors. DNA–cationic polymer complexes are one of the most promising systems to target many inborn or acquired diseases without the utilization of conventional drugs. Despite the excellent binding efficiency of cationic polymers, the gene transfection seems limited to date. In this work, a series of ammonium‐based block‐copolymers with different alkyl side chains (ethyl, butyl, and hexyl) and functionality (alcohol, amine, and alkyl) have been prepared to evaluate their capacity to deliver genetic material. First, different ionic liquid monomers with different pendent functional groups were prepared and characterized. Then, polyplexes elaborated with different polymers at several polymer DNA ratios (w/w) were characterized in terms of size, zeta potential, and DNA binding, release, and protection capacity. Finally, the transfection efficiency and cell viability was evaluated in ARPE19 cells. We found that only the systems containing the amine pendent group were able to transfect ARPE19 cell and, that this amine containing polymer was less cytotoxic even at high polymer/DNA ratios (30:1). In conclusion, our studies suggested that the proper selection of the pendent group substantially impacts overall transfection efficiency of cationic polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 280–287     

烷基化程度对N-十八烷基化聚乙烯亚胺梳状高分子结构的影响

利用烷基化方法制备了烷基化取代程度(DS)介于47%～17.6%的N-十八烷基聚乙烯亚胺(PEI18C)梳状高分子.通过红外光谱、差示扫描量热法(DSC)、X-射线衍射和热失重分析等方法研究了PEI18C梳状高分子的结构、结晶行为和热稳定性,探讨了侧链烷基DS对C18侧链结晶及临界结晶行为的影响.结果发现,随DS的降低,PEI18C梳状高分子的结晶度由54.0%降至20.3%,可结晶碳原子数目由11.4个降到4.3个.受限于PEI骨架上C18烷基侧链的堆积排列模式并没有发生根本变化,仍以六方晶胞的形式进行排列.结果表明,侧链烷基DS或沿主链的侧链烷基分布密度对梳状高分子的结晶行为和临界结晶能力有明显的影响.从侧链结晶的角度,分析了侧链烷基取代度对梳状高分子结晶及热稳定性的影响.     

Comparison of Facially Amphiphilic versus Segregated Monomers in the Design of Antibacterial Copolymers

A direct comparison of two strategies for designing antimicrobial polymers is presented. Previously, we published several reports on the use of facially amphiphilic (FA) monomers which led to polynorbornenes with excellent antimicrobial activities and selectivities. Our polymers obtained by copolymerization of structurally similar segregated monomers, in which cationic and non‐polar moieties reside on separate repeat units, led to polymers with less pronounced activities. A wide range of polymer amphiphilicities was surveyed by pairing a cationic oxanorbornene with eleven different non‐polar monomers and varying the comonomer feed ratios. Their properties were tested using antimicrobial assays and copolymers possessing intermediate hydrophobicities were the most active. Polymer‐induced leakage of dye‐filled liposomes and microscopy of polymer‐treated bacteria support a membrane‐based mode of action. From these results there appears to be profound differences in how a polymer made from FA monomers interacts with the phospholipid bilayer compared with copolymers from segregated monomers. We conclude that a well‐defined spatial relationship of the whole polymer is crucial to obtain synthetic mimics of antimicrobial peptides (SMAMPs): charged and non‐polar moieties need to be balanced locally, for example, at the monomer level, and not just globally. We advocate the use of FA monomers for better control of biological properties. It is expected that this principle will be usefully applied to other backbones such as the polyacrylates, polystyrenes, and non‐natural polyamides.     

Synthesis and antibacterial activities of water‐soluble methacrylate polymers containing quaternary ammonium compounds

New water‐soluble methacrylate polymers with pendant quaternary ammonium (QA) groups were synthesized and used as antibacterial materials. The polymers with pendant QA groups were obtained by the reaction of the alkyl halide groups of a previously synthesized functional methacrylate homopolymer with various tertiary alkyl amines containing 12‐, 14‐, or 16‐carbon alkyl chains. The structures of the functional polymer and the polymers with QA groups were confirmed with Fourier transform infrared and ¹H and ¹³C NMR. The degree of conversion of alkyl halides to QA sites in each polymer was determined by ¹H NMR to be over 90% in all cases. The number‐average molecular weight and polydispersity of the functional polymer were determined by size exclusion chromatography to be 32,500 g/mol and 2.25, respectively. All polymers were thermally stable up to 180 °C according to thermogravimetric analysis. The antibacterial activities of the polymers with pendant QA groups against Staphylococcus aureus and Escherichia coli were determined with broth‐dilution and spread‐plate methods. All the polymers showed excellent antibacterial activities in the range of 32–256 μg/mL. The antibacterial activity against S. aureus increased with an increase in the alkyl chain length for the ammonium groups, whereas the antibacterial activity against E. coli decreased with increasing alkyl chain length. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5965–5973, 2006     

Nano-Encapsulation of Proteins Via Self-Assembly with Lipids and Polymers

Summary: The solubilization and encapsulation of the weakly soluble protein hemoglobin was investigated at the nanoscale using self-assembly with the branched polymer polyethyleneimine (PEI), the lipid glycerol monooleate (GMO), and two amphiphilic poly(ethylenglycol) monooleate derivatives with molecular weights 2100 g/mol (MO-PEG1) and 860 g/mol (MO-PEG2). The created self-assembly nanovehicles were analyzed by quasi-elastic light scattering (QELS) in order to determine their sizes as well as by circular dichroism in order to characterize the protein presence in the nanoobjects. The cationic polymer PEI formed mixed nano-objects with the protein hemoglobin. The polymer conformation in the nanovehicle was established to be sensitive to dilution, a property that can be essential for the protein release upon administration. The amphiphile MO-PEG1 was a co-surfactant in the dispersion of monoglyceride lipid nanoobjects needed for the hemoglobin encapsulation. The amphiphile MO-PEG2 formed small micelles in the absence of a lipid. The nanoobjects dispersions were studied for their stability on storage and reproducibility.     

Nanoscopic fibrous assemblies made of metallophthalocyanine-terminated amphiphilic polymers

Atom-transfer radical polymerization (ATRP) of acrylates from the initiator-modified zinc phthalocyanine yielded amphiphilic, phthalocyanine-terminated polymers with a narrow molecular-weight distribution. The disklike phthalocyanine moiety was incorporated into one end of the polymer chain. We investigated the aggregation behavior of phthalocyanine-terminated polymers in solution and in the solid state by using UV-visible, FT-IR, differential scanning calorimetry (DSC), and temperature-controlled powder X-ray diffraction (XRD) measurements. Amphiphilic phthalocaynine-terminated polymers that possess a poly[tri(ethylene glycol)methyl ether acrylate] chain aggregate in methanol to form a physical gel. Images from atomic force microscopy (AFM) and transmission electron microscopy (TEM) indicate that the physical gel contains a dense fibrous network structure, in which the zinc phthalocyanine groups were stacked into one-dimensional columnar aggregates through intermolecular pi-pi interactions between the pi-conjugated phthalocyanines and through van der Waals interaction of alkyl chains.     

梳状高分子烷基侧链构象和堆积结构的红外光谱研究

以正十九烷和两种接枝烷基链的梳状高分子N-十八烷基聚乙烯亚胺(PEI18C)、N-十八烷基聚对苯甲酰胺(PBA18C)为研究对象,利用红外光谱对处于受限和自由状态的烷基链的构象和堆积结构随温度的变化进行了对比研究.结果表明,处于受限和自由状态的烷基链的构象排列和堆积结构及其转变行为不同,且受限于柔性PEI主链和刚性PBA主链的烷基链也不相同.从主链刚性的角度,探讨了影响烷基侧链构象和堆积结构的原因.     

Amphiphilic Block Copolymer Micelles for Gene Delivery

Gene therapy is a promising method to treat acquired and inherited diseases by introducing exogenous genes into specific recipient cells. Polymeric micelles with different nanoscopic morphologies and properties hold great promise for gene delivery system. Conventional cationic polymers, poly(ethyleneimine)(PEI), poly(L-lysine)(PLL), poly(2-dimethyla-minoethyl methacrylate)(PDMAEMA) and novel cationic polymers poly(2-oxazoline)s(POxs), have been incorporated into block copolymers and decorated with targeting moieties to enhance transfection efficiency. In order to minimize cytotoxicity, nonionic block copolymer micelles are utilized to load gene through hydrophilic and hydrophobic interactions or covalent conjugations, recently. From our perspective, properties(shape, size, and mechanical stiffness, etc.) of block copolymer micelles may significantly affect cytotoxicity, transfection efficiency, circulation time, and load capacity of gene vectors in vivo and in vitro. This review briefly sums up recent efforts in cationic and nonionic amphiphilic polymeric micelles for gene delivery.     

Monolayers and Multilayers of Amphiphilic Phospholipid Analogous Poly(Acrylamide)s

Abstract

A series of amphiphilic phospholipid analogous acrylamide monomers and homopolymers containing long alkyl chains as the hydrophobic groups and phosphatidylcholine analogues as the hydrophilic groups were used to study the properties of monolayers and multilayers. The P-A isotherms of the monolayers for these monomers and polymers were measured at different temperatures. The temperature and length dependence of alkyl chains, and the difference between monomers and polymers were investigated, respectively. On the other hand, the LB multilayers of all monomers and polymers were prepared. The contact angles of LB films obtained with pure water were also measured.