Membranes,immobilization, and protective strategies for enzyme fuel cell stability

Enzymatic biofuel cells (EBFCs) for direct biochemical energy conversion are a promising candidate for addressing the growing power demands for low-power implantable and wearable devices. EBFCs comprise electrodes modified with biorecognition elements that produce bioelectrical energy from the redox activity of an organic fuel (sugars, alcohols) and an oxidant at the surface of the anode and cathode. The biorecognition layers are carefully constructed using enzymes immobilized on the electrode via surface modification strategies to increase the enzyme loading and hence the turnover rate. In addition, a polymer encapsulation membrane is implemented to create a protective microenvironment for the enzymes to enhance the biofuel cell's productivity. In this brief review, the different methods carried out to improve the stability of the EBFC system are discussed. New trends and key challenges are presented to illustrate the importance of the various materials implemented in extending the operational lifetime of EBFCs.     

A Photoelectrochemical Solar Cell Consisting of a Cadmium Sulfide Photoanode and a Ruthenium–2,2′‐Bipyridine Redox Shuttle in a Non‐aqueous Electrolyte

A photoelectrochemical (PEC) cell consisting of an n‐type CdS single‐crystal electrode and a Pt counter electrode with the ruthenium–2,2′‐bipyridine complex [Ru(bpy)₃]^2+/3+ as the redox shuttle in a non‐aqueous electrolyte was studied to obtain a higher open‐circuit voltage (V_OC) than the onset voltage for water splitting. A V_OC of 1.48 V and a short‐circuit current (I_SC) of 3.88 mA cm^?2 were obtained under irradiation by a 300 W Xe lamp with 420–800 nm visible light. This relatively high voltage was presumably due to the difference between the Fermi level of photo‐irradiated n‐type CdS and the redox potential of the Ru complex at the Pt electrode. The smooth redox reaction of the Ru complex with one‐electron transfer was thought to have contributed to the high V_OC and I_SC. The obtained V_OC was more than the onset voltage of water electrolysis for hydrogen and oxygen generation, suggesting prospects for application in water electrolysis.     

A Comparative Study of Functionalized High‐Purity Carbon Nanotubes towards the V(IV)/V(V) Redox Reaction Using Cyclic Voltammetry and Scanning Electrochemical Microscopy

Functionalized high purity carbon nanotubes (CNTs) with various amounts of oxygen containing surface groups were investigated towards the relevant redox reactions of the all‐vanadium redox flow battery. The quinone/hydroquinone redox peaks between 0.0 and 0.7 V vs. Ag|AgCl|KCl_sat. were used to quantifying the degree of functionalization and correlated to XPS results. Cyclic voltammetry in vanadyl sulfate‐containing 3 M H₂SO₄ as a common supporting electrolyte showed no influence of the amount of surface groups on the V(IV)/V(V) redox system. In contrast, the reactions occurring at the negative electrode (V(II)/V(III) and V(III)/V(IV)) are strongly affected by oxygen surface groups. However, under modified experimental conditions, SECM experiments detecting the consumption of VO²⁺ molecules by CNT thin films in pH=2 solution show improved onset potentials with increased surface oxygen content up to ∼ 3 at%. Further increase in surface oxygen up to 8 at% led to minor improvement. These dissimilar results under different experimental conditions are rationalized by suggesting that oxygen functional groups do not form the active site for the V(IV)/V(V) reaction but wetting of the catalyst layer is of high importance.     

Experimental and computational studies on a new mixed ligand oxido–rhenium(V) compound

A mixed ligand oxido–rhenium(V) complex, [ReOS₃(HL)]Cl.H₂O ( 1p Cl.H₂O), with 3‐thiopentane‐1,5‐dithiolato (S₃) as a tridentate ligand and imidazolidinethione (HL) as an ancillary monodentate sulfur donor co‐ligand, has been synthesized. 1p Cl.H₂O has been characterized by spectral analyses. The X‐ray crystal structure of 1p Cl.H₂O shows that the complex contains a distorted square‐pyramidal “ReOS₄” core. The structural parameters agree with our optimized structure of 1p ⁺. Subsequently, the optimized structure was used to calculate systematically the relative stabilities of a sequence of oxido–Re(V) and the analogous oxido–Tc(V) complexes just by varying the donor sites (N, S, and O) on the tridentate ligand moiety in 1p ⁺. Electrochemical studies on 1p Cl.H₂O show an oxidative rhenium(VI)/ rhenium(V) couple at 1.561 V versus Ag/AgCl under controlled linear diffusion situation. Vibrational frequencies, electronic structures, and redox potential of 1p ⁺ have been calculated theoretically employing density functional theory (DFT) or time‐dependent‐DFT methods. The experimental findings are in excellent agreement with the computed results. The calculated redox potentials of the investigated oxido–Re(V) complexes and their oxido–Tc(V) counterparts are shown to correlate linearly with their respective chemical potential values.     

Direct Electron Transfer and Electrocatalysis of Myoglobin Based on its Direct Immobilization on Carbon Ionic Liquid Electrode

Direct electron transfer of myoglobin (Mb) was achieved by its direct immobilization on carbon ionic liquid electrode (CILE) with a conductive hydrophobic ionic liquid, 1‐butyl pyridinium hexaflourophosphate ([BuPy][PF₆]) as binder for the first time. A pair of well‐defined, quasi‐reversible redox peaks was observed for Mb/CILE resulting from Mb redox of heme Fe(III)/Fe(II) redox couple in 0.1 M phosphate buffer solution (pH 7.0) with oxidation potential of ?0.277 V, reduction potential of ?0.388 V, the formal potential E°′ (E°′=(E_pa+E_pc)/2) at ?0.332 V and the peak‐to‐peak potential separation of 0.111 V at 0.5 V/s. The average surface coverage of the electroactive Mb immobilized on the electrode surface was calculated as 1.06±0.03×10^?9 mol cm^?2. Mb retained its bioactivity on modified electrode and showed excellent electrocatalytic activity towards the reduction of H₂O₂. The cathodic peak current of Mb was linear to H₂O₂ concentration in the range from 6.0 μM to 160 μM with a detection limit of 2.0 μM (S/N=3). The apparent Michaelis–Menten constant (K and the electron transfer rate constant (k_s) were estimated to be 140±1 μM and 2.8±0.1 s^?1, respectively. The biosensor achieved the direct electrochemistry of Mb on CILE without the help of any supporting film or any electron mediator.     

Efficient Fe‐Co‐N‐C Electrocatalyst Towards Oxygen Reduction Derived from a Cationic CoII‐based Metal–Organic Framework Modified by Anion‐Exchange with Potassium Ferricyanide

Fe‐Co‐N‐C electrocatalysts have proven superior to their counterparts (e.g. Fe‐N‐C or Co‐N‐C) for the oxygen reduction reaction (ORR). Herein, we report on a unique strategy to prepare Fe‐Co‐N‐C?x (x refers to the pyrolysis temperature) electrocatalysts which involves anion‐exchange of [Fe(CN)₆]^3? into a cationic Co^II‐based metal‐organic framework precursor prior to heat treatment. Fe‐Co‐N‐C‐900 exhibits an optimal ORR catalytic performance in an alkaline electrolyte with an onset potential (E_onset: 0.97 V) and half‐wave potential (E_1/2: 0.86 V) comparable to that of commercial Pt/C (E_onset=1.02 V; E_1/2=0.88 V), which outperforms the corresponding Co‐N‐C‐900 sample (E_onset=0.92 V; E_1/2=0.84 V) derived from the same MOF precursor without anion‐exchange modification. This is the first example of Fe‐Co‐N‐C electrocatalysts fabricated from a cationic Co^II‐based MOF precursor that dopes the Fe element via anion‐exchange, and our current work provides a new entrance towards MOF‐derived transition‐metal (e.g. Fe or Co) and nitrogen‐codoped carbon electrocatalysts with excellent ORR activity.     

The Electrochemical Behavior of a N‐containing Calix[4]arene Derivative

The electrochemical behavior of 5,11,17,23‐Tetrakis‐dimethylaminomethylcalix[4]arene (DCA) has been investigated by cyclic voltammetry (CV). The results show that there is an irreversible electrochemical oxidative wave with peak potential of 1.35 V in chloroform at a glassy carbon electrode. The kinetic parameters of the andic wave, such as α, n and k_s, were discussed. In addition, a new pair of quasi‐reversible redox peaks with peak potentials of 0.72 V and 0.94 V was found. It can result in DCA electrodeposition at the electrode surface. This film modified electrode was characterized by CV and electrochemical impedance spectroscopy (EIS). Moreover, the possible mechanism of electrodeposition was also discussed     

A High‐Voltage Molecular‐Engineered Organic Sensitizer–Iron Redox Shuttle Pair: 1.4 V DSSC and 3.3 V SSM‐DSSC Devices

The development of high voltage solar cells is an attractive way to use sunlight for solar‐to‐fuel devices, multijunction solar‐to‐electric systems, and to power limited‐area consumer electronics. By designing a low‐oxidation‐potential organic dye ( RR9 )/redox shuttle (Fe(bpy)₃^3+/2+) pair for dye‐sensitized solar‐cell (DSSC) devices, the highest single device photovoltage (1.42 V) has been realized for a DSSC not relying on doped TiO₂. Additionally, Fe(bpy)₃^3+/2+ offers a robust, readily tunable ligand platform for redox potential tuning. RR9 can be regenerated with a low driving force (190 mV), and by utilizing the RR9 /Fe(bpy)₃^3+/2+ redox shuttle pair in a subcell for a sequential series multijunction (SSM)‐DSSC system, one of the highest known three subcell photovoltage was attained for any solar‐cell technology (3.34 V, >1.0 V per subcell).     

Electroanalytical Study of Methanol Oxidation and Oxygen Reduction at Carbon Nanohorns‐Pt Nanostructured Electrodes

This work reports a comprehensive electroanalytical study of carbon nanohorns (CNHs) in electrochemical applications. Compared to other types of carbons, the bare CNHs electrode exhibited higher peak current densities and lowest anodic peak‐to‐cathodic peak separation of less than 50 mV for the [Fe(CN)^4?]₆/[Fe(CN)^3?]₆ redox couple. Furthermore, CNHs exhibited excellent electrocatalyst supporting properties for porous Pt film towards methanol oxidation reaction reaching a peak current density of 127 mA cm^?2 or peak current mass activity 184 mA mg_Pt^?1. Regarding oxygen reduction reaction, an onset potential as positive as 0. 77 V vs. Ag/AgCl was achieved with CNHs/porous Pt film.     

A Sustainable Redox‐Flow Battery with an Aluminum‐Based,Deep‐Eutectic‐Solvent Anolyte

Nonaqueous redox‐flow batteries are an emerging energy storage technology for grid storage systems, but the development of anolytes has lagged far behind that of catholytes due to the major limitations of the redox species, which exhibit relatively low solubility and inadequate redox potentials. Herein, an aluminum‐based deep‐eutectic‐solvent is investigated as an anolyte for redox‐flow batteries. The aluminum‐based deep‐eutectic solvent demonstrated a significantly enhanced concentration of circa 3.2 m in the anolyte and a relatively low redox potential of 2.2 V vs. Li⁺/Li. The electrochemical measurements highlight that a reversible volumetric capacity of 145 Ah L⁻¹ and an energy density of 189 Wh L⁻¹ or 165 Wh kg⁻¹ have been achieved when coupled with a I₃⁻/I⁻ catholyte. The prototype cell has also been extended to the use of a Br₂‐based catholyte, exhibiting a higher cell voltage with a theoretical energy density of over 200 Wh L⁻¹. The synergy of highly abundant, dendrite‐free, multi‐electron‐reaction aluminum anodes and environmentally benign deep‐eutectic‐solvent anolytes reveals great potential towards cost‐effective, sustainable redox‐flow batteries.     

Octamethyl‐1, 1′‐di(2‐pyridyl)ferrocene: A Redox‐Active Ligand with a Pronounced Selectivity for Divalent Metal Ions

Octamethyl‐1, 1′‐di(2‐pyridyl)ferrocene ( 1 ) acts as molecular electrochemical sensor for magnesium, calcium, zinc, and cadmium ions in acetonitrile solution. The new redox peak, anodically shifted by ca. 0.40 V, which appears in the cyclic voltammogram of 1 in the presence of even small amounts (10 mol %) of these ions, is unaffected by an excess of alkali metal ions. Metal complexation is accompanied by a batho‐ and hyper‐chromic shift of the band in the visible region of the UV‐Vis spectrum of 1 . A detailed study of the behaviour of 1 towards zinc chloride in acetonitrile solution has revealed that 1 is able to accommodate a maximum of two zinc ions. Oxidation of zinc‐coordinated 1 leads to partial decomplexation. The N‐methyl and N‐benzyl species 1 Me⁺, 1 Me₂²⁺, 1 Bzl⁺ and 1 Bzl₂²⁺ have been synthesized and the former two structurally investigated by X‐ray diffraction. Alkylation causes an anodic shift of the redox potential of the ferrocene nucleus, which is linearly dependent on the number of alkyl groups introduced. Octamethyl‐1, 1′‐di(2‐thiophenyl)ferrocene ( 2 ) has also been synthesized and structurally characterized by X‐ray diffraction. Cyclic voltammetry has revealed that, in contrast to 1 , 2 does not respond to the divalent metal ions studied.     

Porous Nitrogen‐doped Reduced Graphene Oxide Gels as Efficient Supercapacitor Electrodes and Oxygen Reduction Reaction Electrocatalysts

Heteroatom‐doped carbon materials have been widely used in energy storage and conversion such as supercapacitors and electrocatalysts. In this work, L‐asparagine (Asn), an amino acid derivative, has been used as a doping agent to prepare nitrogen‐ doped reduced graphene oxide gels (N‐GAs). The 3D interconnected structure gives rise to the superior electrochemical properties for supercapacitor and electrocatalytic oxygen reduction reaction (ORR). The N‐GA‐4 (the mass ratio of Asn to graphene oxide (GO) is 4 : 1 by hydrothermal method) electrode shows the capacitance of 291.6 F·g^–1 at 0.5 A·g^–1. Meanwhile, the assembled symmetric supercapacitor achieves a maximum energy density of 23.8 Wh· kg^–1 when the power density is 451.2 W·kg^–1, and demonstrates an ultralong cycling life that the retention of capacitance is 99.3% after 80000 cycles. What's more, the annealed aerogel N‐GA‐4‐900 exhibits an onset potential (E_onset) of 0.95 V, half wave potential (E_1/2) of 0.84 V (vs. RHE) and the oxygen reduction current density of 5.5 mA·cm^–2 at 0.1 V with nearly four‐electron transfer, which are superior to commercial Pt/C. This work offers a new insight into the synthesis and applications of N‐GAs materials towards high performance in supercapacitors and ORR.     

Electroenzymatic Nitrogen Fixation Using a MoFe Protein System Immobilized in an Organic Redox Polymer

We report an organic redox‐polymer‐based electroenzymatic nitrogen fixation system using a metal‐free redox polymer, namely neutral‐red‐modified poly(glycidyl methacrylate‐co‐methylmethacrylate‐co‐poly(ethyleneglycol)methacrylate) with a low redox potential of ?0.58 V vs. SCE. The stable and efficient electric wiring of nitrogenase within the redox polymer matrix enables mediated bioelectrocatalysis of N₃^?, NO₂^? and N₂ to NH₃ catalyzed by the MoFe protein via the polymer‐bound redox moieties distributed in the polymer matrix in the absence of the Fe protein. Bulk bioelectrosynthetic experiments produced 209±30 nmol NH₃ nmol MoFe^?1 h^?1 from N₂ reduction. ¹⁵N₂ labeling experiments and NMR analysis were performed to confirm biosynthetic N₂ reduction to NH₃.     

Direct Electron Transfer of Horseradish Peroxidase in Gellan Gum–Hydrophilic Ionic Liquid Gel Film

A new composite film of microbial exocellular polysaccharide‐gellan gum (GG) and hydrophilic room temperature ionic liquid 1‐butyl‐3‐methyl‐imidazolium tetrafluoroborate (BMIMBF₄) was firstly used as an immobilization matrix to entrap horseradish peroxidase (HRP), and its properties were studied by UV/vis spectroscopy, cyclic voltammetry and electrochemical impedance spectroscopy. The results showed that BMIMBF₄ could promote the electron transfer between HRP and electrode surface, and the existence of GG could successfully immobilize BMIMBF₄ on the electrode surface with improved stability. HRP–BMIMBF₄–GG/GCE exhibited a pair of well‐defined and quasireversible cyclic voltammetric peaks in 0.1 M pH 7.0 phosphate buffer solutions at 1.8 V/s, which was the characteristic of HRP Fe(III)/Fe(II) redox couples. The formal potentials (E°′) was ?0.368 V (vs. SCE) and the peak‐to‐peak potential separation (ΔE_P) was 0.058 V. The peak currents were five times as large as those of HRP–GG/GCE. The average surface coverage (Γ*) and the apparent Michaelis‐Menten constant (K_m) were 4.5×10^?9 mol/cm² and 0.67 μM, respectively. The electron transfer rate constant was estimated to be 15.8 s^?1. The proposed electrode showed excellent electrocatalytic activity towards hydrogen peroxide (H₂O₂). The linear dynamic range for the detection of H₂O₂ was 0.05–0.5 μM with a correlation coefficient of 0.9945 and the detection limit was estimated at about 0.02 μM (S/N=3). BMIMBF₄–GG composite film was promising to immobilize other redox enzymes or proteins and attain their direct electrochemistry.     

Tetrathiafulvalene–Oligo(para‐phenyleneethynylene) Conjugates: Formation of Multiple Mixed‐Valence Complexes upon Electrochemical Oxidation

Short monodisperse oligo‐ (para‐phenyleneethynylene) (pOPE) units bearing laterally attached tetrathio‐substituted tetrathiofulvalene (TTF) units have been synthesised from functionalised aromatic building blocks by using the Sonogashira cross‐coupling methodology. The unusual redox properties of these TTF–pOPE conjugates were observed by employing electrochemical methods, such as cyclic voltammetry and exhaustive electrolysis. We found that formally one half of the TTF units in the pOPE monomer 1 , dimer 2 , and trimer 3 (with 2, 4, and 6 TTF units, respectively) are electrochemically silent during the first‐step oxidation at 0.49 V. We propose the formation of persistent mixed‐valence complexes from the TTF and TTF^+. units present in an equal ratio. Such mixed‐valence dyads (single or multiple in the partially oxidised 1 – 3 ) exhibit an unusual stability towards oxidation until the potential of the second oxidation at 0.84 V is achieved. This finding suggests that below this potential the oxidation of the respective mix‐valence complexes is extremely slow.     

Electronic Finetuning of a Bio‐inspired Iron(II) tetra‐NHC Complex by trans Axial Isocyanide Substitution

The synthesis of trans axially substituted mono‐ ( 1 a ) and bis(tert‐butylisocyanide) ( 1 b ) derivatives of the highly active homogeneous bio‐inspired iron(II) olefin epoxidation (pre‐)catalyst 1 bearing an equatorial macrocyclic tetra N‐heterocyclic carbene and two trans axial labile acetonitrile ligands is reported. NMR spectroscopy and SC‐XRD indicate a considerable π‐backdonation from the iron(II) centres to the isocyanide ligand(s). The impact of isocyanide substitution on the electronic features of the complexes is studied by cyclic voltammetry revealing a significant increase in half‐cell potential assignable to the reversible Fe(II)/Fe(III) redox couple with an increasing number of isocyanides as a result of their π‐accepting properties: E_1/2=0.15 V ( 1 ), E_1/2=0.35 V ( 1 a ), E_1/2=0.44 V ( 1 b ).     

Quantum‐Chemical and Electrochemical Investigation of the Electrochemical Windows of Halogenated Carborate Anions

The range of electrochemical stability of a series of weakly coordinating halogenated (Hal=F, Cl, Br, I) 1‐carba‐closo‐dodecaborate anions, [1‐R‐CB₁₁X₅Y₆]^? (R=H, Me; X=H, Hal, Me; Y=Hal), has been established by using quantum chemical calculations and electrochemical methods. The structures of the neutral and dianionic radicals, as well as the anions, have been optimized by using DFT calculations at the PBE0/def2‐TZVPP level. The calculated structures are in good agreement with existing experimental data and with previous calculations. Their gas‐phase ionization energies and electron affinities were calculated based on their optimized structures and were compared with experimental (cyclic and square‐wave) voltammetry data. Electrochemical oxidation was performed in MeCN at room temperature and in liquid sulfur dioxide at lower temperatures. All of the anions show a very high resistance to the onset of oxidation (2.15–2.85 V versus Fc^0/+), with only a minor dependence of the oxidation potential on the different halogen substituents. In contrast, the reduction potentials in MeCN are strongly substituent dependent (?1.93 to ?3.32 V versus Fc^0/+). The calculated ionization energies and electron affinities correlate well with the experimental redox potentials, which provide important verification of the thermodynamic validity of the mostly irreversible redox processes that are observed for this series. The large electrochemical windows that are afforded by these anions indicate their suitability for electrochemical applications, for example, as supporting electrolytes.     

EQCM Study of Iridium Anodic Oxidation in H2SO4 and KOH Solutions

In the present study anodic oxidation of iridium layer formed thermally on a gold‐sputtered quartz crystal electrode has been investigated by electrochemical quartz crystal microgravimetry (EQCM) in the solutions of 0.5 M H₂SO₄ and 0.1 M KOH. The emphasis here has been put on the microgravimetric behavior of iridium as a metal, because a few previous EQCM studies reported in literature have been devoted to iridium oxide films (IROFs). The objective pursued here has been to elucidate the nature of the main voltammetric peaks, which occur at different ranges of potential in the solutions investigated. It has been found that anodic oxidation of iridium electrode in 0.5 M H₂SO₄ and 0.1 M KOH solutions is accompanied by irregular fluctuations of the electrode mass at 0.4 V<E<0.8 V followed by regular increase in mass at 0.8 V<E<1.2 V. The cathodic process initially, at 1.2 V>E>0.9 V, proceeds without any or with slight increase in electrode mass, whereas at E<0.8 V a regular decrease in mass is observed. It has been found that mass to charge ratio characterizing the processes of interest is 2 to 3 g F^?1in acidic medium, whereas in the case of alkaline one it is 4 to 6 g F^?1. The main pair of peaks seen in the voltammograms of Ir electrode in alkaline medium at E<0.8 V is attributable to redox transition Ir(0)→Ir(III), whereas those observed in the case of acidic medium at E>0.8 V should be related to the redox process Ir(0)→Ir(IV) going via intermediate stage of Ir(III) formation. As a consequence of these redox transitions, the gel‐like surface layer consisting of Ir(III) or Ir(IV) hydrous oxides forms on the electrode surface.     

Poly(triphenylamine)s derived from oxidative coupling reaction: Substituent effects on the polymerization,electrochemical, and electro‐optical properties

A series of triphenylamine‐based polymers containing electron‐donating methoxy (? OCH₃) and electron‐withdrawing cyano or nitro (? CN or ? NO₂) substituents in the main chains have been designed and investigated. These conjugated polymers ( P1 – P3 ) could be readily prepared by oxidative coupling polymerization from monomers ( M1 – M3 ) using FeCl₃ as an oxidant. The P2 and P3 exhibited moderate high T_g values (203–205 °C) and thermal stability. These polymers in NMP solution showed UV–vis absorption around 288–404 nm and photoluminescence peaks around 435–492 nm. P1 – P3 showed reversible oxidation redox couples at E_onset = 0.67, 0.99, and 1.00 V in solution of 0.1 M tetrabutylammonium perchlorate (TBAP)/acetonitrile (CH₃CN), respectively. M3 and P3 exhibited reversible reduction redox couples at E_onset = ?1.04 and ?1.03 V. These polymers also revealed electrochromic characteristic changing color at different potential. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 285–294, 2009     

Design of an Os Complex‐Modified Hydrogel with Optimized Redox Potential for Biosensors and Biofuel Cells

Multistep synthesis and electrochemical characterization of an Os complex‐modified redox hydrogel exhibiting a redox potential ≈+30 mV (vs. Ag/AgCl 3 m KCl) is demonstrated. The careful selection of bipyridine‐based ligands bearing N,N‐dimethylamino moieties and an amino‐linker for the covalent attachment to the polymer backbone ensures the formation of a stable redox polymer with an envisaged redox potential close to 0 V. Most importantly, the formation of an octahedral N6‐coordination sphere around the Os central atoms provides improved stability concomitantly with the low formal potential, a low reorganization energy during the Os^3+/2+ redox conversion and a negligible impact on oxygen reduction. By wiring a variety of enzymes such as pyrroloquinoline quinone (PQQ)‐dependent glucose dehydrogenase, flavin adenine dinucleotide (FAD)‐dependent glucose dehydrogenase and the FAD‐dependent dehydrogenase domain of cellobiose dehydrogenase, low‐potential glucose biosensors could be obtained with negligible co‐oxidation of common interfering compounds such as uric acid or ascorbic acid. In combination with a bilirubin oxidase‐based biocathode, enzymatic biofuel cells with open‐circuit voltages of up to 0.54 V were obtained.