Application of Metalfix Chelamine prior to the determination of noble metals by the inductively coupled plasma atomic emission spectrometry

Metalfix Chelamine chelating resins of two different bead sizes (150-300 and 40-80 μm) were examined and compared regarding their application for sorption of Au, Ir, Pd, Pt, Rh and Ru ions from medium of HCl, HNO₃ and mixtures of HCl and HNO₃. The quantitative enrichment of Au, Ir, Pd and Pt was established for the resin of 150-300 μm particle size and for solutions acidified with HCl and HNO₃ (3:1) up to the concentration of 0.50 mol l⁻¹. In the case of Rh and Ru, the uptake of these metals by the resin was lower than 50%. For the elution, solutions of different reagents, i.e. HCl, HNO₃, KCN, KI, KSCN and (NH₂)₂CS, were studied with respect to the complete release of the analytes retained by the resin. In addition, influence of various base metals, i.e. Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn, on the retention of the noble metals was investigated. Under the selected conditions for the retention and elution of Au, Ir, Pd and Pt, the analytical performance of the proposed pre-concentration procedure was evaluated and it was applied to the determination of these noble metals in anodic sludge sample.     

Nanoporous ultra-high-entropy alloys containing fourteen elements for water splitting electrocatalysis

High-entropy alloys (HEAs) are near-equimolar alloys comprising five or more elements. In recent years, catalysis using HEAs has attracted considerable attention across various fields. Herein, we demonstrate the facile synthesis of nanoporous ultra-high-entropy alloys (np-UHEAs) with hierarchical porosity via dealloying. These np-UHEAs contain up to 14 elements, namely, Al, Ag, Au, Co, Cu, Fe, Ir, Mo, Ni, Pd, Pt, Rh, Ru, and Ti. Furthermore, they exhibit high catalytic activities and electrochemical stabilities in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in acidic media, superior to that of commercial Pt/graphene and IrO₂ catalysts. Our results offer valuable insights for the selection of elements as catalysts for various applications.

Nanoporous ultra-high-entropy alloys containing 14 elements (Al, Ag, Au, Co, Cu, Fe, Ir, Mo, Ni, Pd, Pt, Rh, Ru, and Ti) were obtained by dealloying. The products showed excellent electrocatalytic performance for water splitting in acidic media.     

Sandwich Complexes of the As_4～(2-) Aromatic Ring with Some Transition Metals

The equilibrium geometries,energies,harmonic vibrational frequencies,and nucleus independent chemical shifts(NICS) of the new type sandwich structures [As4MAs4]n-(M = Fe,Co,Ni,Ru,Rh,Pd,Os,Ir and Pt;n = 0,1 or 2) are investigated at the B3LYP level.All the [As4MAs4]n-species adopt staggered(D4d) conformations as their stable structures and eclipsed(D4h) conformations as their transition states,and once the sandwich complexes are formed,the As42- square properties remain unchanged.The NICS calculation confirms that the complexes of Fe,Co,and Ni are aromatic with negative NICS values,and those of Ru,Rh,and Ir exhibit slight aromaticity,while those of Pd,Os,and Pt show slight antiaromaticity.     

Displacement solid-phase extraction on mercapto-functionalized magnetite microspheres for inductively coupled plasma mass spectrometric determination of trace noble metals

A flow injection online displacement solid-phase extraction (DSPE) via magnetic immobilization of mercapto-functionalized magnetite microspheres onto the inner walls of a knotted reactor (KR) coupled with inductively coupled plasma mass spectrometry was developed for selective preconcentration and determination of trace noble metals (Ru, Rh, Pd, Pt, Ir and Au) in complex matrices. Online DSPE of 2.7 mL aqueous solution gave the enhancement factors of 32-46 for the six noble metals in comparison with direct nebulization of aqueous sample solution, and the detection limits (3 s) of 2.1 ng L(-1) for Ru, 1.9 ng L(-1) for Rh, 2.5 ng L(-1) for Pd, 1.8 ng L(-1) for Ir, 1.9 ng L(-1) for Pt and 1.7 ng L(-1) for Au. The sample throughput of the developed method was about 20 samples h(-1), and the relative standard deviation for eleven replicate determinations of the noble metals at the 30 ng L(-1) level ranged from 1.2% to 2.1%. The recoveries of Ru, Rh, Pd, Pt, Ir and Au still maintained 90% even after successive 140 cycles of DSPE. The developed method was successfully applied to selective determination of trace Ru, Rh, Pd, Pt, Ir and Au in complex matrices.     

Sandwich Complexes of the As42-Aromatic Ring with Some Transition Metals

The equilibrium geometries, energies, harmonic vibrational frequencies, and nuc- leus independent chemical shifts (NICS) of the new type sandwich structures [As4MAs4]n- (M = Fe, Co, Ni, Ru, Rh, Pd, Os, Ir and Pt; n = 0, 1 or 2) are investigated at the B3LYP level.All the [As4MAs4]n- species adopt staggered (D4d) conformations as their stable structures and eclipsed (D4h) conformations as their transition states, and once the sandwich complexes are formed, the As42- square properties remain unchanged.The NICS calculation confirms that the complexes of Fe, Co, and Ni are aromatic with negative NICS values, and those of Ru, Rh, and Ir exhibit slight aromaticity, while those of Pd, Os, and Pt show slight antiaromaticity.     

The sticking probability for H2 on some transition metals at a hydrogen pressure of 1 bar

The sticking probability for hydrogen on films of Co, Ni, Cu, Ru, Rh, Pd, Ir, and Pt supported on graphite has been measured at a hydrogen pressure of 1 bar in the temperature range 40-200 degrees C. The sticking probability is found to increase in the order Ni, Co, Ir, Pd, Pt, Rh, and Ru at temperatures below 150 degrees C, whereas at higher temperatures, the sticking probability for Pd is higher than for Pt. The sticking probability for Cu is below the detection limit of the measurement. The measured sticking probabilities are slightly lower than those obtained at high hydrogen coverage under ultrahigh vacuum conditions. This could be a consequence of the higher hydrogen pressure used here. The apparent desorption energies extracted from the steady-state desorption rate are found to agree reasonably well with published values for the heat of adsorption at high coverage. However, the sticking probability is not related in a simple way to published values for the heat of adsorption at low coverage, with Ru and Rh giving exceptionally high values for the sticking probability. It is suggested that this is due to the presence of adsorption sites with very low desorption energy on Ru and Rh.     

Pyrimidinethiol as a reagent for extraction separation of platinum metals and gold Determination of Pd(II), Os(VIII) and Ru(III)

The solvent extraction separation of Pt(IV), Pd(II), Os(VIII), Ru(III) and Au(III) from one another and also from Rh(III) and Ir(III) with 1-(2'-nitro-4'-tolyl)-4,4,6-trimethyl-(1H, 4H)-2-pyrimidinethiol has been investigated. Photometric procedures have been developed for the determination of Pd(II), Os(VIII) and Ru(III) with the same reagent. The reagent allows the enrichment of Pd(II) and Au(III) at the trace level from a large volume of aqueous medium even in the presence of base metals. The method can be used for the determination of platinum metals and gold in alloys.     

Chloroform extraction of metal ethyl xanthates from hydrochloric acid media

The chloroform extraction of 32 elements (Fe, Co, Ni, Zn, Cd, Ge, Sn, Pb, V, As, Sb, Bi, Cu, Ag, Au, Mn, Re, Ga, In, Tl, Ce, Se, Te, Cr, Mo, U, Pt, Pd, Rh, Ir, Ru and Os) from O.1-10M hydrochloric acid media in the presence of potassium ethyl xanthate has been studied. The oxidation states in which some elements react, and potential analytical separations, are discussed. Pd(II), As(III) and Se(IV) are completely extracted as ethyl xanthate complexes, Te(IV) is almost completely extracted, and Au(III) is largely extracted over the range of acid concentration investigated. Mn(II), Zn, Rh(III), Ir(IV), Ru(III), Os(IV), Cr(III), Cr(VI), Ce(III) and Ce(IV) are not extracted. Ge is partly extracted from 6-10M media as the chloro-complex. Depending on the acid concentration, the remaining elements are all partially extracted as xanthate complexes.     

Theoretical Investigations of the Activation of CO_2 on the Transition Metal-doped Cu(100) and Cu(111) Surfaces

Periodic density functional theory calculations have been performed to investigate the chemisorption behavior of CO_2 molecule on a series of surface alloys that are built by dispersing individual middle-late transition metal(TM) atoms(TM = Fe, Co, Ni, Ru, Rh, Pd, Ag, Os, Ir, Pt, Au) on the Cu(100) and Cu(111) surfaces. The most stable configurations of CO_2 chemisorbed on different TM/Cu surfaces are determined, and the results show that among the late transition metals, Co, Ru, and Os are potentially good dopants to enhance the chemisorption and activation of CO_2 on copper surfaces. To obtain a deep understanding of the adsorption property, the bonding characteristics of the adsorption bonds are carefully examined by the crystal orbital Hamilton population technique, which reveals that the TM atom primarily provides d orbitals with z-component, namely d_z~2, d_(xz), and d_(yz) orbitals to interact with the adsorbate.     

Specificity of noble metals dynamic sorption preconcentration on reversed-phase sorbents

The reversible sorption preconcentration of noble metals (NMs) using different schemes “sorbent–reagent–eluent” was investigated. The extraction of Au, Pd, Pt, Ir, Rh and Ru chlorocomplexes from hydrochloric acid solutions on hyper-crosslinked polysterene MN-200 in the form of ion associates with tributylamine (TBA) and 4-(n-octyl)diethylenetriamine (ODETA) was investigated. It was found that Pd, Pt and Au were quantitatively and reversibly extracted using TBA on hyper-crosslinked polysterene; the appropriate eluent for desorption was 1 M solution of HCl in ethanol. Ir, Rh and Ru under these conditions were not sorbed quantitatively. It was found that sorbent hydrophobicity is not the main characteristic that defines the efficiency of sorption of a particular NM ion associate. Different efficiencies of hyper-crosslinked polysterene MN-200 for sorption of square-planar chlorcomplexes of Pt, Pd and Au and octahedral complexes of Ir, Rh and Ru were found. For the first time, the sorbents with their own N-atoms – StrataX and StrataX-AW – were used for the sorption of Ir, Rh and Ru. Using these sorbents, the sorption of Ir was increased up to 95%, and the sorption of Ru and Rh was increased to about 40%. We can explain these results by nonspecific interaction of chlorcomplexes of Ir, Rh and Ru with ethylenediamine groups of the sorbent. Weak bases with large anions may be applied for desorption of Ir, Rh and Ru. Two schemes of dynamic sorption preconcentration of NMs from hydrochloric acid solutions were proposed – hyper-crosslinked polysterene MN-200 for the determination of Au, Pd, Pt, and StrataX-AW for Ir, Rh and Ru.     

Determination of platinum metals complexes with 2-(6-methyl-2-benzothiazolylazo)-5-diethylaminophenol by reversed-phase high performance liquid chromatography

The use of 2-(6-methyl-2-benzothiazolylazo)-5-diethylaminophenolas a precolumn derivatizing reagent in the reversed-phase high performance liquid Chromatographic separation and determination of Ru(III), Rh(III), Os(IV), Ir(IV), Pt(II), Co(II), Ni(II) and Cu(II) is reported. When the mobile phase consists of methanol-water (76/24% v/v) and 20 mmol/l (pH 5.0) acetate buffer, the eight complexes can be separated within 35 min on a C₈ column. The detection limits are Ru 7.0, Rh 5.1, Os 1.5, Ir 7.6, Pt 3.7, Co 0.62, Ni 0.14 and Cu 1.2 ng/ml, respectively, at a signal-to-noise ratio of 3. RSDs were typically Ca. 1%.     

Chloroform extraction of ethyl xanthate complexes from sulphuric acid media

The chloroform extraction of 30 elements (Fe, Co, Ni, Zn, Cd, Ge, Sn, V, As, Sb, Bi, Cu, Ag, Au, Mn, Re, Ga, In, Tl, Se, Te, Cr, Mo, U, Pt, Pd, Rh, Ir, Ru and Ce) from 0.1-8M sulphuric acid in the presence of potassium ethyl xanthate has been studied. Pd(II), Bi, As(III), Sb(III), Se(IV) and Te(IV) are completely extracted and Au(III) is largely extracted over the range of acid concentration investigated. Fe(II), Tl(I), Rh(III) and Cr(VI) are only slightly extracted and Se(VI), Te(VI), Ru(III), Cr(III), Mn(II), Zn, Ce(IV), Ir(IV) and Ge(IV) are not extracted at all. Depending on the acid concentration, the remaining elements are all partly extracted. Results are compared with those obtained in an earlier study of the extraction of xanthate complexes from hydrochloric acid media. The processes involved in the formation of some xanthate complexes and potential analytical separations are discussed.     

Development of liquid-liquid extraction and separation method for ruthenium(III) with 2-octylaminopyridine from succinate media: Analysis of catalysts

Ruthenium(III) has been efficiently extracted from 0.05 M sodium succinate at pH 9.5 by 2-octylaminopyridine in xylene and stripped with aqueous 10% (w/v) thiourea solution and determined spectrophotometrically. Various parameters viz., pH, weak acid concentration, reagent concentration, stripping agents, contact time, loading capacity, aq.: org. volume ratio, solvent has been thoroughly investigated for quantitative extraction of ruthenium(III). The utility of method was analyzed by separating the ruthenium(III) from binary mixture along with the base metals like Cu(II), Ag(I), Fe(II), Co(II), Bi(III), Zn(II), Ni(II), Se(IV), Te(IV), Al(III) and Hg(II) as well as platinum group metals (PGMs). Ruthenium(III) was also separated from ternary mixtures like Os(VIII), Pd(II); Pd(II), Pt(IV); Pd(II), Au(III); Pd(II), Cu(II); Fe(II), Cu(II); Ni(II), Cu(II); Co(II), Ni(II); Se(IV), Te(IV); Rh(III), Pd(II); Fe(III), Os(VIII). The stoichiometry 1: 2: 1 (metal: succinate: extractant) of the proposed complex was determined by slope analysis method by plotting graph of logD _[Ru(III)] versus logC _[2-OAP] and logD _[Ru(III)] versus logC _[succinate]. The interference of various cations and anions has been studied in detail and the statistical evaluations of the experimental results are reported. The method was successfully applied for the analysis of ruthenium in various catalysts, synthetic mixtures corresponding to the composition of alloys and minerals.     

The application of discontinuous,countercurrent, liquid-liquid extraction to the study of the distribution of metal ions between hydrochloric acid and methyl isobutyl ketone

Summary The extraction of the elements Ti, V, Cr, Mn, Fe, Co, Ni, Zn, Ga, As, Nb, Mo, Ru, Rh, Pd, Ag, Cd, In, Sn, Sb, La, W, Re, Os, Ir, Pt, Au, Hg, Tl, Pb and Bi from hydrochloric acid into methyl isobutyl ketone has been studied as a function of hydrochloric acid concentration. The results are presented in graphical form. The data were obtained by studying the distribution patterns of the elements after equilibration on a Craig countercurrent liquid-liquid extraction apparatus.

---

Zusammenfassung Die Extraktion der Elemente Ti, V, Cr, Mn, Fe, Co, Ni, Zn, Ga, As, Nb, Mo, Ru, Rh, Pd, Ag, Cd, In, Sn, Sb, La, W, Re, Os, Ir, Pt, Au, Hg, Tl, Pb und Bi mit Methylisobutylketon aus salzsaurer Lösung als Funktion der Säurekonzentration wurde studiert. Die Ergebnisse wurden aus den Spitzen der Verteilungskurven nach Einstellung des Gleichgewichts in einem diskontinuierlichen Gegenstrom-flüssig-flüssig-Extraktionsapparat berechnet.

---

Résumé On a étudié l'extraction des éléments Ti, V, Cr, Mn, Fe, Co, Ni, Zn, Ga, As, Nb, Mo, Ru, Rh, Pd, Ag, Cd, In, Sn, Sb, La, W, Re, Os, Ir, Pt, Au, Hg, Tl, Pb et Bi en solution chlorhydrique par la méthylisobutylcétone. On présente les résultats sous forme graphique. Les données ont été obtenues en étudiant les diagrammes de distribution des éléments après équilibrage sur un appareil Craig à extraction à contre-courant liquide-liquide.

     

火试金预浓集结合中子活化和电感耦合等离子体质谱法测定铂族元素

建立了两种以火试金预浓集为基础的、可用于准确测定铂族元素的方法;中子活化法和电感耦合等离子体质谱法。讨论了它们的分析检出限、准确度及其适应性。并用这两种方法测定了5种候选地质参考物质中铂族元素的含量。     

General Synthesis of Single-Atom Catalysts for Hydrogen Evolution Reactions and Room-Temperature Na-S Batteries

Herein, we report a comprehensive strategy to synthesize a full range of single-atom metals on carbon matrix, including V, Mn, Fe, Co, Ni, Cu, Ge, Mo, Ru, Rh, Pd, Ag, In, Sn, W, Ir, Pt, Pb, and Bi. The extensive applications of various SACs are manifested via their ability to electro-catalyze typical hydrogen evolution reactions (HER) and conversion reactions in novel room-temperature sodium sulfur batteries (RT-Na-S). The enhanced performances for these electrochemical reactions arisen from the ability of different single active atoms on local structures to tune their electronic configuration. Significantly, the electrocatalytic behaviors of diverse SACs, assisted by density functional theory calculations, are systematically revealed by in situ synchrotron X-ray diffraction and in situ transmission electronic microscopy, providing a strategic library for the general synthesis and extensive applications of SACs in energy conversion and storage.     

Crystallographic and structural characterization of heterometallic platinum compounds. Part II. Heterobinuclear Pt compounds with Pt?M (M = transition or lantanide metal) > 3.0 ?

This review covers almost two hundred and twenty heterobinuclear platinum compounds in which Pt?M separation is over 3.0 ?. The M is a transition metal (Cu, Ag, Au, Ti, V, Cr, Mo, W, Mn, Re, Fe, Ru, Os, Co, Rh, Ir, Ni and Pd). There is an example of a lanthanide, Yb and a actinide, U. The Pt atom has oxidation numbers 0, +2 and +4. The Pt coordination geometries include trigonal planar Pt(0); square planar Pt(II); trigonal bipyramidal, and pseudo octahedral Pt(IV), with the most frequent being square planar. The most common ligands for Pt are P and C donor atoms, as well as a chlorine atom. The Pt ?? Ag distance of 3.002(1) ? is the shortest found in this series. There are examples which contain two crystallographically independent molecules, which differ mostly by degree of distortion and even one unique example, which contains eight such molecules. These are examples of distortion isomerism. Factors affecting bond lengths and angles are discussed and some ambiguities in coordination polyhedral are outlined.     

The extraction of noble metals with n-octylaniline

The extraction of noble metals with n-octylaniline at varying concentrations of different mineral acids was studied, and optimum conditions for their separation from the base metals commonly present in platinum-bearing materials were established. The successful application of the procedure to the analysis of mattes, sludges, and flotation concentrates is shown. The lower limit of determination in such materials is 100 ppm for Pt and Ir, 40 ppm for Ru, and 10 ppm for Pd and Rh.     

Combinatorial electrochemical synthesis and characterization of tungsten-based mixed-metal oxides

Automated systems for electrochemical synthesis and high-throughput screening of photoelectrochemical materials were developed and used to prepare tungsten-based mixed-metal oxides, W(n)O(m)M(x) [M = Ni, Co, Cu, Zn, Pt, Ru, Rh, Pd, and Ag], specifically for hydrogen production by photoelectrolysis of water. Two-dimensional arrays (libraries) of diverse metal oxides were synthesized by automated cathodic electrodeposition of the oxides on Ti foil substrates. Electrolytes for the mixed oxides were prepared from various metal salts added to a solution containing tungsten stabilized as a peroxo complex. Electrodeposition of the peroxo-stabilized cations gave rise to three distinguishable oxide groups: (1) mixed-metal oxides [Ni], (2) metal-doped tungsten oxides [Pt, Ru, Rh, Pd, Ag], and (3) metal-metal oxide composites [Co, Cu, Zn]. The oxides typically showed n-type semiconducting behavior. Automated measurement of photocurrent using a scanning photoelectrochemical cell showed the W-Ni mixed oxide had the largest relative zero bias photocurrent, particularly at a low Ni concentration (5-10 atomic percent Ni). Pt and Ru were also found to increase the photoactivity of bulk tungsten oxide at relatively low concentrations; however, at concentrations above 5 atomic percent, crystallization of WO(3) was inhibited and photoactivity was diminished. Addition of Co, Cu, and Zn to WO(3) was not found to improve the photoelectrochemical activity.