Novel visible-light-driven photocatalyst of NiO/Cd/g-C3N4 for enhanced degradation of methylene blue

Novel NiO/Cd/g-C₃N₄ photocatalysts were synthesized using a green and straightforward microwave-assisted method and characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), the Brunauer–Emmett–Teller (BET) method, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and ultraviolet–visible spectroscopy (UV–Vis). The ternary NiO/Cd/g-C₃N₄ nanocomposites were evaluated for the degradation of methylene blue (MB) at room temperature under the visible light irradiation. Experimental results revealed that the weight percent of cadmium had a remarkable effect on the photodegradation efficiency. The NiO/Cd/g-C₃N₄ (0.1%) sample exhibited superior activity in the degradation reaction. The activity of this nanocomposite was about 4.5 and 3.25 fold higher than those of the pure g-C₃N₄ and NiO/g-C₃N₄ samples in the degradation of MB, respectively. The enhanced photocatalytic activity was attributed to the low energy gap, increased absorption capacity of the visible light, and efficient suppression of the recombination of photogenerated electron-hole pairs. A detailed photocatalytic mechanism over the nanocomposite of NiO/Cd/g-C₃N₄ (0.1%) was proposed with superoxide radical anion O₂^– as the main reactive species. The stability of the nanocomposite was confirmed after four consecutive runs as well.     

Hydrogen production and photocatalytic activity of g-C3N4/Co-MOF (ZIF-67) nanocomposite under visible light irradiation

Herein, cobalt (Co)-based metal–organic zeolitic imidazole frameworks (ZIF-67) coupled with g-C₃N₄ nanosheets synthesized via a simple microwave irradiation method. SEM, TEM and HR-TEM results showed that ZIF-67 were uniformly dispersed on g-C₃N₄ surfaces and had a rhombic dodecahedron shape. The photocatalytic properties of g-C₃N₄/ZIF-67 nanocomposite were evaluated by photocatalytic dye degradation of crystal violet (CV), 4-chlorophenol (4-CP) and photocatalytic hydrogen (H₂) production. In presence of visible light illumination, the photocatalytic dye results showed that 95% CV degradation and 53% 4-CP degradation within 80 min. The H₂ production of the g-C₃N₄/ZIF-67 composite was 2084 μmol g⁻¹, which is 3.84 folds greater than that of bare g-C₃N₄ (541 μmol g⁻¹).     

Sunlight assisted photocatalytic degradation of organic pollutants using g-C3N4-TiO2 nanocomposites

The photocatalytic degradation of environmentally non-benign, toxic organic pollutants such as bisphenol A (BPA), brilliant green (BG), or mixture of dyes have been carried out using g-C₃N₄-TiO₂ (GNT) nanocomposites. The GNT nanocomposites were synthesized by using hydrothermal method with different compositions and these nanocomposites were characterized using the different techniques. X-ray diffraction revealed that the anatase phase of TiO₂ has been retained in composites; while characteristic reflection of g-C₃N₄ at 27.07° (d = 3.22 Å) is not observed due to its lower content in the nanocomposites. Raman spectra confirms the formation of composites between TiO₂ with g-C₃N₄. Furthermore nano-scale dimensions of the bare or composites have been proved by FE-SEM and HR-TEM analysis. X-ray photoelectron spectroscopy (XPS) shows the presence of C, N, Ti and O as a constituents, with peaks due to CC, NCN of g-C₃N₄. Among the different nanocomposites, g-C₃N₄-TiO₂ catalyst having 30% g-C₃N₄ and 70% TiO₂ in molar proportion (i.e. 30-GNT) is exhibiting the highest efficiency for degradation of the different dyes in correlation to its higher surface area, lower optical band gap as well as more visible-light absorption (i.e., λ > 400 nm) in the electromagnetic spectrum.     

碳纳米管改性g-C3N4提升可见光催化降解性能

以尿素为原料,引入少量的多壁碳纳米管(CNT)改性,采用简便方法制备CNT/g-C_3N_4催化剂。利用扫描电镜(SEM)、透射电镜(TEM)、傅里叶红外光谱仪(FT-IR)、X射线衍射(XRD)、X射线光电子能谱(XPS)、紫外-可见-近红外分光光度计(UV-Vis-NIR Spectrophotometer)、荧光光谱(PL)等手段对CNT/g-C_3N_4催化剂进行表征。结果表明,g-C_3N_4与CNT之间的协同作用,影响了gC_3N_4的能带结构,增强了其对可见光的吸收,改善了光生载流子的分布,提高了电子-空穴对的分离效率。并以罗丹明B(RhB)水溶液模拟废水,在可见光下考察催化剂的光催化降解性能,发现当CNT掺杂量为0.1%(w/w)时效果最佳,降解速率常数是体相g-C_3N_4的3.1倍,且研究发现超氧自由基是该体系下的主要活性物种。     

Microwave-assisted synthesis of the Fe2O3/g-C3N4 nanocomposites with enhanced photocatalytic activity for degradation of methylene blue

The preparation and photocatalytic performance of the Fe₂O₃/g-C₃N₄ nanocomposites with different weight percentage of iron was investigated in this study. Samples were successfully synthesized using melamine and ferric nitrate as the precursors via the green and facile microwave-assisted method. The physicochemical and structural properties of the Fe₂O₃-doped g-C₃N₄ were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), the Brunauer–Emmett–Teller (BET) method, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and ultraviolet–visible spectroscopy (UV–Vis). The photocatalytic activity of the Fe₂O₃/g-C₃N₄ catalysts was evaluated by the degradation of methylene blue (MB) at room temperature under visible light irradiation. As expected, the as-synthesized samples exhibited considerable improvement in the photodegradation of MB. The Fe₂O₃/g-C₃N₄ (1.0 wt%) nanocomposite had superior photocatalytic activity, with almost 70% degradation efficiency within 90 min of irradiation. The enhanced performance was ascribed to the separation and migration of the photoinduced electron–hole pairs and taking part of the charge carriers in the chemical redox reactions at the surface of the photocatalyst. In this work, the effect of Fe weight percentage on the degradation potential was also studied, and the photocatalytic mechanism was proposed with the main reactive species •OH.     

Highly Efficient Ag3PO4/g-C3N4 Z-Scheme Photocatalyst for Its Enhanced Photocatalytic Performance in Degradation of Rhodamine B and Phenol

Ag₃PO₄/g-C₃N₄ heterojunctions, with different g-C₃N₄ dosages, were synthesized using an in situ deposition method, and the photocatalytic performance of g-C₃N₄/Ag₃PO₄ heterojunctions was studied under simulated sunlight conditions. The results revealed that Ag₃PO₄/g-C₃N₄ exhibited excellent photocatalytic degradation activity for rhodamine B (Rh B) and phenol under the same light conditions. When the dosage of g-C₃N₄ was 30%, the degradation rate of Rh B at 9 min and phenol at 30 min was found to be 99.4% and 97.3%, respectively. After five cycles of the degradation experiment for Rh B, g-C₃N₄/Ag₃PO₄ still demonstrated stable photodegradation characteristics. The significant improvement in the photocatalytic activity and stability of g-C₃N₄/Ag₃PO₄ was attributed to the rapid charge separation between g-C₃N₄ and Ag₃PO₄ during the Z-scheme charge transfer and recombination process.     

g-C3N4纳米管的制备及其光催化降解性能

以三聚氰胺和碳酸氢铵混合物为原料,采用简便热解法制备g-C_3N_4纳米管。热解过程中碳酸氢铵分解释放出大量的NH3,能够诱导纳米管的形成。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、红外光谱(IR)、N_2吸附-脱附、紫外-可见漫反射光谱以及紫外可见光谱(UV)等分析测试方法对该光催化剂的微观形貌结构和催化性能进行了表征。以罗丹明光催化降解为模型反应研究了g-C_3N_4纳米管的光催化活性。g-C_3N_4纳米管的表面积明显增大,且能够有效地促进光生电子转移,在可见光下具有较强的光催化性能,降解率在60和120 min时分别能达到95%和99.4%,且循环重复利用5次后降解率不低于92%。     

氮缺陷石墨相氮化碳的制备及其光催化降解环境有机污染物性能

通过在三聚氰胺热分解过程中加入NaHCO₃制备出具有氮缺陷的石墨相氮化碳（g-C₃N₄）,利用X射线衍射（XRD）、傅里叶变换红外光谱（FT-IR）、N₂吸附-脱附、X射线光电子能谱（XPS）、紫外-可见漫反射光谱（UV-vis DRS）和固体荧光光谱（PL）等方法对其进行表征,并在可见光（λ> 420nm）照射下,以水相中罗丹明B（RhB）的降解为模型反应,研究了该氮缺陷g-C₃N₄对有机污染物降解的光催化活性。结果表明,引入氮缺陷可以提高g-C₃N₄对可见光的吸收以及电子-空穴对的分离效率,进而提高g-C₃N₄的可见光催化活性。催化剂CNK0.005、CNK0.01和CNK0.05在30min内对RhB的降解率分别为79.8%、100.0%和87.6%;而在相同条件下,没有氮缺陷的g-C₃N₄对RhB的降解率仅为59.8%。     

MoS2/g-C3N4复合材料的制备及可见光催化性能

首先在N-甲基吡咯烷酮溶液中超声剥离得到少层的MoS₂,将其与石墨相氮化碳（g-C₃N₄）复合,制得MoS₂/g-C₃N₄复合材料。采用X射线衍射（XRD）,扫描电镜（SEM）,X射线光电子能谱（XPS）,傅里叶变换红外光谱（FTIR）,Raman光谱,紫外-可见漫反射吸收光谱（DRS）和光致荧光（PL）技术对复合材料进行表征。可见光下考察MoS₂/g-C₃N₄复合材料光催化降解罗丹明B（RhB）的活性,结果表明：将少量MoS₂与g-C₃N₄复合可明显提高光催化活性,且1%（w/w）MoS₂/g-C₃N₄复合物的光催化活性最高,可能的原因是MoS₂和g-C₃N₄匹配的能带结构,增大了界面间电荷的传输,降低了光生电子-空穴的复合,进而提高了光催化活性。     

一锅法制备Co3O4/g-C3N4复合光催化剂及其光催化性能

以三聚氰胺和六水合氯化钴为原料,一锅法制备Co_3O_4负载的多孔石墨相氮化碳(Co_3O_4/g-C_3N_4)复合光催化材料。采用X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL)等手段对其结构和光学特性进行表征。以盐酸四环素(TC)为目标污染物,评价了不同负载量Co_3O_4/g-C_3N_4复合光催化剂的可见光催化性能。结果表明,所制备的Co_3O_4/g-C_3N_4复合光催化剂为多孔结构,其比表面积较大,并在可见光区域具有显著的吸收。利用原位生成的Co_3O_4纳米粒子在氮化碳表面形成异质结构,可有效转移光生载流子,降低光生电子-空穴的再结合率,从而提高光催化活性。并且存在最佳Co_3O_4复合量,当六水合氯化钴加入量为三聚氰胺的8%(w/w)时,所制备的复合光催化剂CoCN-8具有最佳的光催化性能。在可见光的照射下,60 min内可降解85%的TC,而同样条件下,纯g-C_3N_4仅降解23%的TC。     

Photocatalytic desulfurization of thiophene base on molecular oxygen and zinc phthalocyanine/g-C3N4

Oxidative desulfurization is considered to be one of the promising new methods for super-deep desulfurization of fuel oil. Herein, zinc phthalocyanine/g-C₃N₄ (g-C₃N₄/ZnTcPc) composites were synthesized by a facile in situ hydrothermal technique, utilizing g-C₃N₄, Zn(CH₃COO)₂ and 1,2,4-benzenetricarboxylic anhydride as the precursors. The crystal structure, morphology and chemical environment of the catalysts were respectively confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Photocatalytic activity of the resulting g-C₃N₄/ZnTcPc composites was evaluated by desulfurization of thiophene in fuel under visible light with molecular O₂ as the oxidant. Compared with pure g-C₃N₄ and ZnTcPc, g-C₃N₄/ZnTcPc presented a significantly enhanced photocatalytic activity for the degradation of thiophene in fuel under visible irradiation. Sulfur content of model gasoline (800 ppm) after desulfurization for 90 min was decreased to 125 ppm. The possible preparation pathway of g-C₃N₄/ZnTcPc has been proposed according to the results of XRD and TEM. The formation mechanism of g-C₃N₄/ZnTcPc–O₂ complex is proposed to be desulfurization by molecular oxygen.

     

g-C3N4纳米管的制备及其光催化降解性能

以三聚氰胺和碳酸氢铵混合物为原料,采用简便热解法制备g-C₃N₄纳米管。热解过程中碳酸氢铵分解释放出大量的NH₃,能够诱导纳米管的形成。利用X射线衍射（XRD）、扫描电子显微镜（SEM）、红外光谱（IR）、N₂吸附-脱附、紫外-可见漫反射光谱以及紫外可见光谱（UV）等分析测试方法对该光催化剂的微观形貌结构和催化性能进行了表征。以罗丹明光催化降解为模型反应研究了g-C₃N₄纳米管的光催化活性。g-C₃N₄纳米管的表面积明显增大,且能够有效地促进光生电子转移,在可见光下具有较强的光催化性能,降解率在60和120 min时分别能达到95%和99.4%,且循环重复利用5次后降解率不低于92%。     

MoS_2/g-C_3N_4复合材料的制备及可见光催化性能

首先在N-甲基吡咯烷酮溶液中超声剥离得到少层的MoS_2,将其与石墨相氮化碳(g-C_3N_4)复合,制得MoS_2/g-C_3N_4复合材料。采用X射线衍射(XRD),扫描电镜(SEM),X射线光电子能谱(XPS),傅里叶变换红外光谱(FTIR),Raman光谱,紫外-可见漫反射吸收光谱(DRS)和光致荧光(PL)技术对复合材料进行表征。可见光下考察MoS_2/g-C_3N_4复合材料光催化降解罗丹明B(Rh B)的活性,结果表明:将少量MoS_2与g-C_3N_4复合可明显提高光催化活性,且1%(w/w)MoS_2/g-C_3N_4复合物的光催化活性最高,可能的原因是MoS_2和g-C_3N_4匹配的能带结构,增大了界面间电荷的传输,降低了光生电子-空穴的复合,进而提高了光催化活性。     

Synthesis g-C3N4 of high specific surface area by precursor pretreatment strategy with SBA-15 as a template and their photocatalytic activity toward degradation of rhodamine B

Using SBA-15 as a template, high surface area porous graphitic carbon nitrides (g-C₃N₄) were successfully synthesized by pretreating melamine using hydrochloric acid, and fully characterized by Fourier-Transform infrared (FT-IR), X-ray diffraction (XRD), scanning electron micrographs (SEM), N₂ adsorption-desorption, ultraviolet-visible (UV-Vis) spectroscopy, photoluminescence (PL) spectrum. The results of these analyses indicated that the g-C₃N₄ synthesized from HCl-pretreated melamine with SBA-15 as a template has enhanced specific surface area and increased the separation rate of the photogenerated electrons and holes compared with bulk g-C₃N₄, but didn’t change the structure of bulk g-C₃N₄. The photocatalytic activity of samples was evaluated by the degradation of rhodamine B (RhB) under xenon lamp. The results indicated that the activity was improved significantly with the increase of specific surface area. The rate constant for CN-3（HCl pretreatment melamine precursor and SBA-15 as a template） was 13 times as high as g-C₃N₄. Furthermore, the CN-3 catalyst exhibited outstanding structural and catalytic stability.     

In Situ Synthesis of Cu3P/P-Doped g-C3N4 Tight 2D/2D Heterojunction Boosting Photocatalytic H2 Evolution†

Heterojunction design in a two-dimensional (2D) fashion has been deemed beneficial for improving the photocatalytic activity of g-C₃N₄ because of the promoted interfacial charge transfer, yet still facing challenges. Herein, we construct a novel 2D/2D Cu₃P nanosheet/P-doped g-C₃N₄ (PCN) nanosheet heterojunction photocatalyst (PCN/Cu₃P) through a simple in-situ phosphorization treatment of 2D/2D CuS/g-C₃N₄ composite for photocatalytic H₂ evolution. We demonstrate that the 2D lamellar structure of both CuS and g-C₃N₄ could be well reserved in the phosphorization process, while CuS and g-C₃N₄ in-situ transformed into Cu₃P and PCN, respectively, leading to the formation of PCN/Cu₃P tight 2D/2D heterojunction. Owing to the large contact area provided by intimate face-to-face 2D/2D structure, the PCN/Cu₃P photocatalyst exhibits significantly enhanced charge separation efficiency, thus achieving a boosted visible-light-driven photocatalytic behavior. The highest rate for H₂ evolution reaches 5.12 μmol·h^–1, nearly 24 times and 368 times higher than that of pristine PCN and g-C₃N₄, respectively. This work represents an excellent example in elaborately constructing g-C₃N₄-based 2D/2D heterostructure and could be extended to other photocatalyst/co-catalyst system.      

NiFe2O4/g-C3N4 heterojunction composite with enhanced visible-light photocatalytic activity

Spinel structure nickel ferrite (NiFe₂O₄) doped graphitic carbon nitride (g-C₃N₄) photocatalyst NiFe₂O₄/g-C₃N₄ was synthesized by the coprecipitation route to enhance the photocatalytic activity for the visible-light driven degradation of methyl orange. The NiFe₂O₄ doping content is responsible for the microstructure and photocatalytic activity of NiFe₂O₄/g-C₃N₄ samples. Compared with pure NiFe₂O₄ and g-C₃N₄, the 2-NiFe₂O₄/g-C₃N₄ composite with NiFe₂O₄ doping of 2.0 wt% exhibited excellent photocatalytic activity and superior stability after five runs for degrading methyl orange under visible light irradiation. The catalytic activity of 2-NiFe₂O₄/g-C₃N₄ sample produced using the coprecipitation route was higher than those of conventional 2-NiFe₂O₄/g-C₃N₄ bulks prepared by the impregnation approach. The prepared samples for the photocatalytic degradation of methyl orange followed pseudo-first-order reaction kinetics. It’s ascribed to the synergistic effect between NiFe₂O₄ and g-C₃N₄, which can inhibit the recombination of photoexcited electron-hole pairs, accelerate photoproduced charges separation, and enhance the visible light absorption.     

In-situ polymerization for PPy/g-C3N4 composites with enhanced visible light photocatalytic performance

Polypyrrole-modified graphitic carbon nitride composites (PPy/g-C₃N₄) are fabricated using an in-situ polymerization method to improve the visible light photocatalytic activity of g-C₃N₄. The PPy/g-C₃N₄ is applied to the photocatalytic degradation of methylene blue (MB) under visible light irradiation. Various characterization techniques are employed to investigate the relationship between the structural properties and photoactivities of the as-prepared composites. Results show that the specific surface area of the PPy/g-C₃N₄ composites increases upon assembly of the amorphous PPy nanoparticles on the g-C₃N₄ surface. Owing to the strong conductivity, the PPy can be used as a transition channel for electrons to move onto the g-C₃N₄ surface, thus inhibiting the recombination of photogenerated carriers of g-C₃N₄ and improving the photocatalytic performance. The elevated light adsorption of PPy/g-C₃N₄ composites is attributed to the strong absorption coefficient of PPy. The composite containing 0.75 wt% PPy exhibits a photocatalytic efficiency that is 3 times higher than that of g-C₃N₄ in 2 h. Moreover, the degradation kinetics follow a pseudo-first-order model. A detailed photocatalytic mechanism is proposed with ·OH and ·O₂^? radicals as the main reactive species. The present work provides new insights into the mechanistic understanding of PPy in PPy/g-C₃N₄ composites for environmental applications.     

Photocatalytic activity under visible light illumination of organic dyes over g-C3N4/MgAl2O4 nanocomposite

Using a grinding method, nanocomposites of graphitic carbon nitride (g-C₃N₄) and magnesium aluminate (MgAl₂O₄) spinel were successfully synthesized for the photocatalytic degradation of methylene blue (MB) and methyl orange (MO). Variously formulated g-C₃N₄/MgAl₂O₄ nanocomposites were characterized by thermal gravimetric analysis (TGA), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy equipped with energy dispersive spectroscopy (SEM/EDS), transmission electron microscopy (TEM) and surface area and micropore analysis (BET surface area). The g-C₃N₄ powder exhibited a nanosheet structure whereas the MgAl₂O₄ spinel comprised agglomerated nanoparticles. The optical properties of the g-C₃N₄/MgAl₂O₄ nanocomposites were investigated by diffuse reflectance spectroscopy (DRS). As the g-C₃N₄ loading content increased from 0 to 30%, the optical band gap energy of the nanocomposite decreased from 3.84 to 2.86 eV, the specific surface area decreased from 153.78 to 114.45 m²/g, and the porosity decreased from 0.447 to 0.347 cm³/g. A 20%g-C₃N₄/MgAl₂O₄ nanocomposite proved to be the most effective photocatalyst and degraded MB faster and more completely than MO. The degradation rates of both MO (0.0107 min^?1) and MB (0.0386 min^?1) in a mixed MO-MB system were greater than the degradation rates in their single systems. The key factor that improved the photocatalytic degradation of MO was the synergistic effect whereas the synergistic effect and photosensitization were the key factors that enhanced the photocatalytic degradation of MB. The g-C₃N₄/MgAl₂O₄ nanocomposite is suitable for the photocatalytic degradation of mixed dyes because its point of zero charge is neutral and it is stable and recyclable.     

One-step fabrication and high photocatalytic activity of porous graphitic carbon nitride/graphene oxide hybrid by direct polymerization of cyanamide without templates

Graphene oxide modified porous g-C₃N₄ (porous g-C₃N₄/GO) had been synthesized by means of one-step calcination of cyanamide for efficient photocatalysis under visible light irradiation (λ > 400 nm). We expect that the photocatalytic activity of this hybrid photocatalyst could be enhanced by the efficient visible light absorption due to the porous structure and efficient photo generated charge separation at the heterojunction formed between porous g-C₃N₄ and GO. Scanning electron microscopy (SEM) images demonstrated that the as prepared photocatalyst is composed of GO and porous g-C₃N₄. The UV-vis diffuse reflectance spectrum shows that optical absorption of porous g-C₃N₄/GO is more intensive than for pristine g-C₃N₄. The enhanced generation of photocurrent under visible light irradiation (λ > 400 nm) is observed for the porous g-C₃N₄/GO. The results of photocatalytic experiments reveal that the pseudofirst-order kinetic constant of photocatalytic degradation of methylene blue (MB) using the porous g-C₃N₄/GO is 6 times higher than that of pristine g-C₃N₄.     

Two-step calcination synthesis of Z-scheme α-Fe2O3/few-layer g-C3N4 composite with enhanced hydrogen production and photodegradation under visible light

Solar photocatalytic technology is of great significance for adjusting energy structure and environmental improvement. Developing an efficient and low-cost photocatalyst is key to realizing the conversion of solar to chemical energy. In this study, α-Fe₂O₃-modified few-layer g-C₃N₄ hybrids (α-Fe₂O₃/FL g-C₃N₄) were successfully prepared by a two-step calcination route with a mixture of α-Fe₂O₃ and melamine. The samples were characterized by Thermogravimetric analysis, X-ray diffraction, Fourier transform infrared, scanning electron microscope, transmission electron microscope, High-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, Brunauer–Emmett–Teller, UV–Vis absorption spectrum, photoluminescence, and Time-resolved photoluminescence spectroscopy; furthermore, their photoelectrochemical measurements and their photocatalytic performances were evaluated by visible light-driven hydrogen evolution and degradation of RhB. The results showed that the hydrogen production activity and degradation ability of α-Fe₂O₃/FL g-C₃N₄ were significantly enhanced compared with those of α-Fe₂O₃ / multilayer g-C₃N₄ (α-Fe₂O₃/ML g-C₃N₄) and FL g-C₃N₄. The enhanced photoactivities were mainly attributed to the synergistic effect between the increased visible-light absorption, enhanced surface area, and highly efficient electron transfer and separation on the Z-type heterojunction interface. This work not only provides evidence for the formation of FL g-C₃N₄ nanosheets using a thermal exfoliation method but also provides new insights into the interfacial charge carrier dynamics of Z-scheme α-Fe₂O₃/FL g-C₃N₄ heterostructures for photocatalytic H₂ generation and pollutant degradation.