Determination of dissolved organic phosphorus in soil solutions by an improved automated photo-oxidation procedure

An improved automated photo-oxidation procedure to determine dissolved organic phosphorus in soil solutions is described. Organically combined phosphorus is converted quantitatively to orthophosphate under UV radiation and an excess of dissolved oxygen. The orthophosphate is determined spectrophotometrically using the Murphy and Riley procedure, modified by increasing the concentration of ascorbic acid. Fluoride was added to the system to overcome potential interference when working with soil solution. The limit of detection was 0.64 mug/l. PO(4)(-3) -P and calibration was linear over the range studied (5-1000 mug/l. PO(4)(-3) -P).     

Struvite precipitation for ammonia nitrogen removal in 7-aminocephalosporanic acid wastewater

7-Aminocephalosporanic acid wastewater usually contains high concentrations of ammonium (NH??-N), which is known to inhibit nitrification during biological treatment processes. Chemical precipitation is a useful technology to remove ammonium from wastewater. In this paper, the removal of ammonium from 7-aminocephalosporanic acid wastewater was studied. The optimum pH, molar ratio, and various chemical compositions of magnesium ammonium phosphate (MAP) precipitation were investigated. The results indicated that ammonium in 7-aminocephalosporanic acid wastewater could be removed at an optimum pH of 9. The Mg2?:NH??-N:PO? 3?-P molar ratio was readily controlled at a ratio of 1:1:1.1 to both effectively remove ammonium and avoid creating a higher concentration of PO? 3?-P in the effluent. MgCl?·6H?O + 85% H?PO? was the most efficient combination for NH??-N removal. Furthermore, the lowest concentration of the residual PO? 3?-P was obtained with the same combination. Struvite precipitation could be considered an effective technology for the NH??-N removal from the 7-aminocephalosporanic acid wastewater.     

Unexpected selectivities in C-H activations of toluene and p-xylene at cationic platinum(II) diimine complexes. New mechanistic insight into product-determining factors.

The C-H activation of toluene and p-xylene at cationic Pt(II) diimine complexes (N-N)Pt(CH(3))(H(2)O)(+)BF(4)(-) (N-N = Ar-N=CMe-CMe=N-Ar; 1(BF(4)(-)), N(f)-N(f), Ar = 3,5-(CF(3))(2)C(6)H(3)); 2(BF(4)(-)), N'-N', Ar = 2,6-(CH(3))(2)C(6)H(3)) has been investigated. The reactions were performed at ambient temperature in 2,2,2-trifluoroethanol (TFE), and after complete conversion of the starting material to mixtures of Pt-aryl/Pt-benzyl complexes and methane, acetonitrile was added to trap the products as more stable acetonitrile adducts. In the reactions with toluene, the relative amounts of products resulting from aromatic C-H activation were found to decrease in the order (N-N)Pt(m-tolyl)(NCMe)(+) > (N-N)Pt(p-tolyl)(NCMe)(+) > (N-N)Pt(o-tolyl)(NCMe)(+) for both 1 and 2. Unlike the reaction at 1, significant amounts of the benzylic activation product (N'-N')Pt(benzyl)(NCMe)(+) were concurrently formed in the C-H activation of toluene at 2. The C-H activation of p-xylene revealed an even more remarkable difference between 1 and 2. Here, the product ratios of (N-N)Pt(xylyl)(NCMe)(+) and (N-N)Pt(p-methylbenzyl)(NCMe)(+) were found to be 90:10 and 7:93 for reactions at 1 and 2, respectively. The elimination of toluene from (N(f)-N(f))Pt(Tol)(2) species (3a-c; a, Tol = o-tolyl; b, Tol = m-tolyl; c, Tol = p-tolyl) after protonolysis with 1 equiv of HBF(4) was investigated. Most notably, protonation in neat TFE followed by addition of acetonitrile gave a 77:23 mixture of (N(f)-N(f))Pt(m-tolyl)(NCMe)(+) (4b) and (N(f)-N(f))Pt(p-tolyl)(NCMe)(+) (4c) from all three isomeric bis(tolyl) complexes 3a-c. The presence of acetonitrile during the protonation reactions resulted in considerably less isomerization. This behavior is explained by an associative mechanism for the product-determining displacement of toluene by the solvent. For the C-H activation reactions, our findings suggest the existence of a dynamic equilibrium between the isomeric intermediates (N-N)Pt(aryl)(CH(4))(+) (aryl = tolyl/benzyl from 1; xylyl/p-methylbenzyl from 2). The observed selectivities might then be explained by steric and electronic effects in the pentacoordinate transition-state structures for the solvent-induced associative elimination of methane from these intermediates.     

Infrared spectra of C(3)H(3)(+)-N(2) dimers: identification of proton-bound c-C(3)H(3)(+)-N(2) and H(2)CCCH(+)-N(2) isomers.

Mid-infrared photodissociation spectra of mass selected C(3)H(3)(+)-N(2) ionic complexes are obtained in the vicinity of the C-H stretch fundamentals (2970-3370 cm(-1)). The C(3)H(3)(+)-N(2) dimers are produced in an electron impact cluster ion source by supersonically expanding a gas mixture of allene, N(2), and Ar. Rovibrational analysis of the spectra demonstrates that (at least) two C(3)H(3)(+) isomers are produced in the employed ion source, namely the cyclopropenyl (c-C(3)H(3)(+)) and the propargyl (H(2)CCCH(+)) cations. This observation is the first spectroscopic detection of the important c-C(3)H(3)(+) ion in the gas phase. Both C(3)H(3)(+) cations form intermolecular proton bonds to the N(2) ligand with a linear -C-H...N-N configuration, leading to planar C(3)H(3)(+)-N(2) structures with C(2v) symmetry. The strongest absorption of the H(2)CCCH(+)-N(2) dimer in the spectral range investigated corresponds to the acetylenic C-H stretch fundamental (v(1) = 3139 cm(-1)), which experiences a large red shift upon N(2) complexation (Delta(v1) approximately -180 cm(-1)). For c-C(3)H(3)(+)-N(2), the strongly IR active degenerate antisymmetric stretch vibration (v4)) of c-C(3)H(3)(+) is split into two components upon complexation with N(2): v4)(a(1)) = 3094 cm(-1) and v4)(b(2)) = 3129 cm(-1). These values bracket the yet unknown v4) frequency of free c-C(3)H(3)(+) in the gas phase, which is estimated as 3125 +/- 4 cm(-1) by comparison with theoretical data. Analysis of the nuclear spin statistical weights and A rotational constants of H(2)CCCH(+)-N(2) and c-C(3)H(3)(+)-N(2) provide for the first time high-resolution spectroscopic evidence that H(2)CCCH(+) and c-C(3)H(3)(+) are planar ions with C(2v) and D(3h) symmetry, respectively. Ab initio calculations at the MP2(full)/6-311G(2df,2pd) level confirm the given assignments and predict intermolecular separations of R(e) = 2.1772 and 2.0916 A and binding energies of D(e) = 1227 and 1373 cm(-1) for the H-bound c-C(3)H(3)(+)-N(2) and H(2)CCCH(+)-N(2) dimers, respectively.     

Binding of propylene oxide to porphyrin- and salen-M(III) cations, where M = Al, Ga, Cr, and Co

The binding of propylene oxide (PO) to a series of metal cations LM(III)(+), where for L = tetraphenylporphyrin (TPP) M = Al, Ga, Cr, and Co, and for L = (R,R)-N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexenediamine (salen) M = Al and Cr, was studied in the gas phase by electrospray tandem mass spectroscopy, and the relative stabilities of LM(PO)(2)(+) and LM(PO)(+) cations were determined. The chromium(III) and aluminum(III) cations most tenaciously bind PO, and for M = Al, coordination to the TPP ligated metal center was favored relative to salen. For (TPP)M(PO)(2)(+), the dissociation of PO followed the order M = Al > Cr, but for (TPP)M(PO)(+) the dissociation was M = Cr > Al. The single-crystal structural determinations on (R,R-salen)AlOCHMe(S)CH(2)Cl.0.5PO and (R,R-salen)AlO(2)CMe.1.5py grown in neat PO and pyridine, respectively, reveal five-coordinate aluminum(III) centers with the alkoxide/acetate ligands in the axial position of a square-based pyramid. These results are discussed in terms of the reactivity of these metal complexes in ring-opening polymerizations and copolymerizations with PO and CO(2), respectively.     

Ammonium-Nitrogen Recovery from Wastewater by Struvite Crystallization Technology

Struvite crystallization is one of the sustainable approaches for recovering ammonium nitrogen (NH₄-N) from wastewater in the form of a valuable material, in parallel with improving wastewater treatment efficiency. Focusing on NH₄-N recovery, this review discusses the factors influencing struvite crystallization including the effect of foreign elements. It is shown that more than 95% of NH₄-N could be recovered in the form of struvite, a magnesium-ammonium phosphate (MAP) salt, from some kinds of wastewater. This review emphasizes the role of utilizing alternative sources of Mg and P in improving the process sustainability. Additionally, it also explains how the MAP precipitation process could result with significant reduction of other pollutants contributing to total organic carbon, of color and turbidity, which support MAP integration with other treatment methods. The main options of lowering MAP recovery cost are presented; it was shown that applying low-cost materials of both Mg and P could save more than 65% of the process’s cost. Finally, the future research directions to improve NH₄-N recovery are pointed out.     

Laser ablation synthesis of new phosphorus nitride clusters from α-P3N5 via Laser Desorption Ionization and Matrix Assisted Laser Desorption Ionization Time-Of-Flight Mass Spectrometry

Phosphorus nitride clusters generated during Laser Desorption Ionization (LDI) and Matrix-Assisted Laser Desorption Ionization (MALDI) of solid P(3) N(5) were analyzed via Time-of-Flight Mass Spectrometry (TOF MS). The LDI TOF mass spectra show the formation of series of clusters: P(m)N(n)(+) {(m=1; n=8-11), (m=4; n=3-4), (m=5; n=1-5), (m=6; n=1-3, 5-8), (m=2-7; n=1), (m=5-10; n=2), (m=4-6; n=3), (m=4,5; n=4), (m=5,6; n=5)}, and P(m)N(n)(-) (m=4,5; n=1). Using 3-hydroxypicolinic acid (HPA) as a matrix the P(m)N(n)(+) species (m=1-4, 6, 8) with a high nitrogen content (n=4, 5, 8, 10-12, 20) were identified. The formation of a N(6)(-) cluster was also detected using a C(60) matrix. Under various conditions singly charged P(m)(+) (m=2-7, 9, 13), P(m)(-) (m=3-11, 13, 15, 17), N(n)(+) (n=5, 9, 10, 12, 13), and N(n)(-) (n=6, 10-15) clusters were identified in the mass spectra. Such high nitrogen content clusters (up to N(15)(-)) generated by laser desorption from a solid material are described for the first time. The stoichiometry of the P(m)N(n) clusters was determined via isotopic envelope analysis and computer modelling. The composition of the clusters with respect to the crystalline structure of α-P(3)N(5) is discussed.     

Rh(I) and Ir(i) derivatives of a P(S),N-substituted indene ligand: synthetic, structural, and catalytic alkene hydrosilylation studies

Treatment of 1-PiPr2-indene or 1-PiPr2-2-NMe2-indene (1a) with elemental sulfur afforded 3-iPr2P(S)-indene or 1-iPr2P(S)-2-NMe2-indene (4a) in 81% and 85% isolated yield, respectively. Addition of 4a to [(COD)M(THF)2]+BF4- afforded the corresponding [(COD)M(kappa2-N,S-4a)]+BF4- complexes (M = Rh, 5a, 76%; M = Ir, 5b, 59%; COD = eta4-1,5-cyclooctadiene), which were found to exhibit temperature-dependent NMR spectral features that were rationalized in terms of a dynamic process involving M-NMe2 dissociation, rotation about the indenyl-NMe2 bond, inversion at nitrogen, and re-coordination to M. Analysis of variable-temperature NMR data collected for 5a and 5b each yielded a value for DeltaG(double dagger) of ca. 14 kcal/mol for this process. Exposure of 5a or 5b to NaN(SiMe3)2 generated the corresponding (COD)M(kappa2-C,S-1-iPr2P(S)-2-NMe2-(C1-indenyl)) complex (M = Rh, 6a, 70%; M = Ir, 6b, 86%) in which the metal is incorporated into an M-C-P-S ring via coordination to the indenyl ring in an eta1-fashion, as well as to sulfur. Alternatively, complex 6b was prepared cleanly via lithiation of 4a followed by treatment with 0.5 equiv of [(COD)IrCl]2. The ability of 5a,b and 6a,b to mediate the addition of triethylsilane to styrene was also explored, and their performance was compared with that of Wilkinson's Catalyst ((PPh3)3RhCl) and Crabtree's catalyst ([(COD)Ir(PCy3)(Py)]+PF6-; Cy = cyclohexyl; Py = pyridine). Single-crystal X-ray diffraction data are provided for 4a, 2-NMe2-3-iPr2P(S)-indene (4b), 6a, and 6b.     

Polystyrene-supported dicyclohexylphenylphosphine adducts of amine- and phosphite-based palladacycles in the Suzuki coupling of aryl chlorides

The polystyrene-immobilised palladacyclic complexes [Pd(TFA)(kappa2-N,C-C6H4CH2NMe2){P(C6H4-4-PS)Cy2}] and [PdCl(kappa2-P,C-{P(OC6H2-2,4-tBu2)(OC6H3-2,4-tBu2)2}{P(C6H4-4-PS)Cy2}](PS = polystyrene) and the homogeneous analogues [Pd(TFA)(kappa2-N,C-C6H4CH2NMe2)(PPhCy2)] and PdCl(kappa2-P,C-{P(OC6H2-2,4-tBu2)(OC6H3-2,4-tBu2)2}(PPhCy2)] were synthesised and characterised. The X-ray structure of one of the homogeneous analogues, [Pd(TFA)(kappa2-N,C-C6H4CH2NMe2)(PPhCy2)] was determined. All the complexes have been tested and show good activity in the Suzuki coupling of aryl chloride substrates. While the polystyrene-immobilised complexes are not recyclable, they are easily extracted and show low levels of palladium leaching.     

Mononuclear, helical binuclear palladium and lithium complexes bearing a new pyrrole-based NNN-pincer ligand: fluxional property

A new pyrrole based NNN-pincer ligand, 2,5-bis(3,5-dimethylpyrazolylmethyl)pyrrole 2, was readily synthesized in two steps from pyrrole in 56% yield. The lithiation of the pincer ligand 2 using n-BuLi led to isolation of the dimeric lithium complex, [Li{μ-C(4)H(2)N-2,5-(CH(2)Me(2)pz)(2)-N,N,N}](2) 4, in 23% crystalline yield. The transmetalation reaction of 4 with [Pd(PhCN)(2)Cl(2)] afforded the mononuclear Pd(II) complex, [PdCl{C(4)H(2)N-2,5-(CH(2)Me(2)pz)(2)-N,N,N}] 5, containing one chloride ion in 45% yield. Alternatively 5 was obtained in an excellent yield of 87% by the reaction 2 of with [Pd(COD)Cl(2)] in the presence of triethylamine. On the contrary, a 20-membered macrometalacyclic molecule, [Pd(2)Cl(4){μ-C(4)H(3)N-2,5-(CH(2)Me(2)pz)(2)-N,N}(2)] 6, in which two PdCl(2) units are bridged by two molecules of 2 to give a helical structure, was synthesized by the reaction of 2 with [Pd(COD)Cl(2)] in the absence of base. The acetate analogue of complex 5, [Pd(OAc){C(4)H(2)N-2,5-(CH(2)Me(2)pz)(2)-N,N,N}] 3, was obtained by the treatment of 2 with [Pd(OAc)(2)]. The pyrrole twist angle of 5 is higher than that of 3. Complexes 3 and 5 show an AB pattern for their methylene protons at room temperature in CDCl(3) as well as in DMSO-d(6). The variable temperature NMR studies showed that the acetate and chloride complexes exhibit slightly different coalescence temperatures, which is a solvent dependent phenomenon, and twist angles.     

Encapsulation of anion/cation in the central cavity of tetrameric polyoxometalate, composed of four trititanium(IV)-substituted α-Dawson subunits, initiated by protonation/deprotonation of the bridging oxygen atoms on the intramolecular surface

Preparation and structural characterization of a novel polyoxometalate (POM), [(P(2)W(15)Ti(3)O(60.5))(4)(NH(4))](35-) 1, i.e., an encapsulated NH(4)(+) cation species in the central cavity of a tetramer (called the Dawson tetramer) constituted by trititanium(IV)-substituted α-Dawson POM substructure, are described. POM 1 was synthesized by several different methods and unequivocally characterized by complete elemental analysis, thermogravimetric and differential thermal analysis (TG/DTA), FTIR spectroscopy, solution ((15)N{(1)H}, (31)P, (183)W) NMR spectroscopy, and X-ray crystallography. First, POM 1 was synthesized by a reaction of NH(4)Cl in aqueous solution with a precursor, which was derived by thermal treatment of a monomeric triperoxotitanium(IV)-substituted Dawson POM, [α-1,2,3-P(2)W(15)(TiO(2))(3)O(56)(OH)(3)](9-) 2, for 3 h in an electric furnace at 200 °C. The encapsulated NH(4)(+) cation in 1 was confirmed by (15)N{(1)H} NMR measurement and X-ray crystallography. As another synthesis of 1, a direct exchange of the Cl(-) anion encapsulated in [{α-1,2,3-P(2)W(15)Ti(3)O(57.5)(OH)(3)}(4)Cl](25-) 3 with the NH(4)(+) cation was attained by neutralizing an aqueous solution containing 3 with the addition of aqueous NH(3) (the initial pH of ca. 2-2.5 was changed to 6.4), followed by adding NH(4)Cl. It has been clarified that the conditions as to whether the anion or the cation is encapsulated in the central cavity of the Dawson tetramer were significantly related to the protonation/deprotonation of the bridging oxygen atoms on the intramolecular surface, Ti-O-Ti/Ti-OH-Ti sites constituting the Dawson subunits.     

Orbital symmetry as a tool for understanding the bonding in Krossing's cation

The geometric and electronic structure of Krossing's cation, Ag(eta(2)-P(4))(2)(+), which shows an unexpected planar coordination environment at the metal center and D(2)(h) symmetry both in solution and in the solid state, have been investigated using density functional theory and orbital-symmetry-based energy decomposition. The analysis reveals that the contribution from electrostatic interactions to the bond energy is greater than that of orbital interactions. Partitioning of the latter term into the irreducible representations shows that, in addition to the 5s orbital, 5p orbitals of silver act as acceptor orbitals for electron donation from sigma(P-P) orbitals (a(1)(g), b(1)(u)) and n(P) orbitals (b(3)(u)). Back-donation from the 4d(10) closed shell of Ag into sigma orbitals of the pnictogen cages (b(2)(g)) is also important. However, this contribution is shown not to determine the D(2)(h) structure, contradicting conclusions from the pioneering study of the title cation (J. Am. Chem.Soc. 2001, 123, 4603). The contributions from the irreducible representations to the stabilizing orbital interactions in the D(2)(h) structure and in its D(2)(d)-symmetric conformer are analogous, indicating that the planar coordination environment at the metal center in Ag(eta(2)-P(4))(2)(+) is induced by intermolecular rather than by intramolecular interactions. Because ethylene coordination to a metal ion is an elementary reaction step in industrial processes, the bonding in Ag(C(2)H(4))(2)(+) has been analyzed as well and compared to that in Krossing's cation. Surprisingly, similar contributions to the bond energies and an involvement of metal 4d and 5p orbitals have been found, whereas a recent atoms in molecules analysis suggested that the metal-ligand interactions in silver(I) olefin complexes fundamentally differ from those in tetrahedro P(4) complexes. The only qualitative difference between the bonding patterns in Ag(eta(2)-P(4))(2)(+) and Ag(C(2)H(4))(2)(+) is the negligible energy contribution from the b(3)(u) irreducible representation in the ethylene complex because a respective symmetry-adapted linear combination of ligand orbitals is not available.     

IR spectra of C2H5(+)-N2 isomers: evidence for dative chemical bonding in the isolated ethanediazonium ion

The potential energy surface (PES) of C(2)H(5)(+)-N(2) is characterized in detail by infrared photodissociation (IRPD) spectroscopy of mass-selected ions in a quadrupole tandem mass spectrometer and ab initio calculations at the MP2/6-311G(2df,2pd) level. The PES features three nonequivalent minima. Two local minima, 1-N(2)(H) and 1-N(2)(C), are adduct complexes with binding energies of D(0) = 18 and 12 kJ/mol, in which the N(2) ligand is weakly bonded by electrostatic forces to either the acidic proton or the electrophilic carbon atom of the nonclassical C(2)H(5)(+) ion (1), respectively. The global minimum 3 is the ethanediazonium ion, featuring a weak dative bond of D(0) = 38 kJ/mol. This interaction strength is sufficient to switch the C(2)H(5)(+) structure from nonclassical to classical. The 1-N(2)(C) isomer corresponds to the entrance channel complex for addition of N(2) to 1 yielding the product 3. This reaction involves a small barrier of 7 kJ/mol as a result of the rearrangement of the C(2)H(5)(+) ion. The partly rotationally resolved IRPD spectrum of C(2)H(5)(+)-N(2) recorded in the C-H stretch range is dominated by four bands assigned to 3 and one weak transition attributed to 1-N(2)(H). The abundance ratio of 1-N(2)(H) and 3 estimated from the IRPD spectrum as ～1% is consistent with the calculated free energy difference of 12 kJ/mol. As the ethanediazonium ion escaped previous mass spectrometric detection, the currently accepted value for the ethyl cation affinity of N(2) is revised from -ΔH(0) = 15.5 ± 1.5 to ～42 kJ/mol. The first experimental identification and characterization of 3 provides a sensitive probe of the electrophilic character and fluxionality of the ethyl cation. Comparison of 3 with related alkanediazonium ions reveals the drastic effect of the size of the alkyl chain on their chemical reactivity, which is relevant in the context of hydrocarbon plasma chemistry of planetary atmospheres and the interstellar medium, as well as alkylation reactions of (bio)organic molecules (e.g., carcinogenesis and mutagenesis of DNA material).     

Comparison of structure and reactivity of phosphine-amido and hemilabile phosphine-amine chelates of rhodium

A series of mono- and binuclear rhodium(I) complexes bearing ortho-phosphinoanilido and ortho-phosphinoaniline ligands has been synthesized. Reactions of the protic monophosphinoanilines, Ph(2)PAr or PhPAr(2) (Ar = o-C(6)H(4)NHMe), with 0.5 equiv of [Rh(μ-OMe)(COD)](2) result in the formation of the neutral amido complexes, [Rh(COD)(P,N-Ph(2)PAr(-))] or [Rh(COD)(P,N-PhP(Ar(-))Ar)] (Ar(-) = o-C(6)H(4)NMe(-)), respectively, through stoichiometrically controlled deprotonation of an amine by the internal methoxide ion. Similarly, the binuclear complex, [Rh(2)(COD)(2)(μ-P,N,P',N'-mapm(2-))] (mapm(2-) = Ar(Ar(-))PCH(2)P(Ar(-))Ar), can be prepared by reaction of the protic diphosphinoaniline, mapm (Ar(2)PCH(2)PAr(2)), with 1 equiv of [Rh(μ-OMe)(COD)](2). An analogous series of hemilabile phosphine-amine compounds can be generated by reactions of monophosphinoanilines, Ph(2)PAr' or PhPAr'(2) (Ar' = o-C(6)H(4)NMe(2)), with 1 equiv of [Rh(NBD)(2)][BF(4)] to generate [Rh(NBD)(P,N-Ph(2)PAr')][BF(4)] or [Rh(NBD)(P,N-PhPAr'(2))][BF(4)], respectively, or by reactions of diphosphinoanilines, mapm or dmapm (Ar'(2)PCH(2)PAr'(2)), with 2 equiv of the rhodium precursor to generate [Rh(2)(NBD)(2)(μ-P,N,P',N'-mapm)][BF(4)](2) or [Rh(2)(NBD)(2)(μ-P,N,P',N'-dmapm)][BF(4)](2), respectively. Displacement of the diolefin from [Rh(COD)(P,N-Ph(2)PAr(-))] by 1,2-bis(diphenylphosphino)ethane (dppe) yields [Rh(P,P'-dppe)(P,N-Ph(2)PAr(-))] which, while unreactive to H(2), reacts readily and irreversibly with oxygen to form the peroxo complex, [RhO(2)(P,P'-dppe)(P,N-Ph(2)PAr(-))], and with iodomethane to yield [RhI(CH(3))(P,P'-dppe)(P,N-Ph(2)PAr(-))]. Hemilabile phosphine-amine compounds can also be prepared by reactions of [Rh(P,P'-dppe)(P,N-Ph(2)PAr(-))] with Me(3)OBF(4) or HBF(4)·Et(2)O, resulting in (thermodynamic) additions at nitrogen to form [Rh(P,P'-dppe)(P,N-Ph(2)PAr')][BF(4)] or [Rh(P,P'-dppe)(P,N-Ph(2)PAr)][BF(4)], respectively. The nonlabile phosphine-amido and hemilabile phosphine-amine complexes were tested as catalysts for the silylation of styrene. The amido species do not require the use of solvents in reaction media, can be easily removed from product mixtures by protonation, and appear to be more active than their hemilabile, cationic congeners. Reactions catalyzed by either amido or amine complexes favor dehydrogenative silylation in the presence of excess olefin, showing modest selectivities for a single vinylsilane product. The binuclear complexes, which were prepared in an effort to explore possible catalytic enhancements of reactivity due to metal-metal cooperativity, are in fact somewhat less active than mononuclear species, discounting this possibility.     

Landfill leachate treatment using the sequencing batch biofilm reactor method integrated with the electro-Fenton process

A study was conducted on the treatment of landfill leachate by combining the sequencing batch biofilm reactor (SBBR) method with the electro-Fenton method. The reduction of chemical oxygen demand (COD), biological oxygen demand (BOD₅), and ammonia nitrogen (NH ₄ ⁺ -N) from the leachate by the SBBR method was investigated. For the electro-Fenton experiment, the changes in COD and total organic carbon (TOC) with the increase in H₂O₂ dosage and electrolysis time under optimal conditions were also analysed. The results showed that the average efficiencies of reduction of COD, BOD₅, and NH ₄ ⁺ -N achieved using the SBBR method were 21.6 %, 54.7 %, and 56.1 %, respectively. The bio-effluent was degraded by the subsequent electro-Fenton process, which was rapid over the first 30 min then subsequently slowed. After 60 min of the electro-Fenton treatment, the efficiencies of reduction of TOC, COD, and BOD₅ were 40.5 %, 71.6 %, and 61.0 %, respectively. There is a good correlation between the absorbance of leachate at 254 nm (UV₂₅₄) and COD or TOC during the electro-Fenton treatment.     

MBBR两种填料对养猪废水脱氮除磷效果对比

为了探讨移动床生物膜反应器中不同填料对废水脱氮除磷效果的影响,采用碳纤维球和聚乙烯塑料两种不同悬浮填料进行对比试验。在不同运行条件下,分别测定氨氮、总氮、总磷、COD等指标,对比挂膜和脱氮除磷效果。结果表明,碳纤维球填料挂膜速度快,在不同运行条件下均比聚乙烯塑料填料对COD、NH4+-N、TN、TP等的去除效果好,去除率分别可达91.2%、98.0%、77.5%、68.1%。这说明比表面积大、孔隙率高的填料挂膜更快,挂膜量更多,更有利于实现同时生物脱氮除磷。     

Tetravalent titanium, zirconium, and cerium oxo and peroxo complexes containing an imidodiphosphinate ligand

Dinuclear Ti(IV), Zr(IV), and Ce(IV) oxo and peroxo complexes containing the imidodiphosphinate ligand [N(i-Pr(2)PO)(2)](-) have been synthesized and structurally characterized. Treatment of Ti(O-i-Pr)(2)Cl(2) with KN(i-Pr(2)PO)(2) afforded the Ti(IV) di-μ-oxo complex [Ti{N(i-Pr(2)PO)(2)}(2)](2)(μ-O)(2) (1) that reacted with 35% H(2)O(2) to give the peroxo complex Ti[N(i-Pr(2)PO)(2)](2)(η(2)-O(2)) (2). Treatment of HN(i-Pr(2)PO)(2) with Zr(O-t-Bu)(4) and Ce(2)(O-i-Pr)(8)(i-PrOH)(2) afforded the di-μ-peroxo-bridged dimers [M{N(i-Pr(2)PO)(2)}(2)](2)(μ-O(2))(2) [M = Zr (3), Ce (4)]. 4 was also obtained from the reaction of Ce[N(i-Pr(2)PO)(2)](3) with 35% H(2)O(2). Treatment of (Et(4)N)(2)[CeCl(6)] with 3 equiv of KN(i-Pr(2)PO)(2) afforded Ce[N(i-Pr(2)PO)(2)](3)Cl (5). Reaction of (Et(4)N)(2)[CeCl(6)] with 2 equiv of KN(i-Pr(2)PO)(2) in acetonitrile, followed by treatment with Ag(2)O, afforded the μ-oxo-bridged complex [Ce{N(i-Pr(2)PO)(2)}Cl](2)[μ-N(i-Pr(2)PO)(2)](2)(μ-O) (6). 6 undergoes ligand redistribution in CH(2)Cl(2) in air to give 5. The solid-state structures of [K(2){N(i-Pr(2)PO)(2)}(2)(H(2)O)(8)](n) and complexes 1-6 have been determined.     

Phosphorus complexes of N-fused porphyrin and its reduced derivatives: new isomers of porphyrin stabilized via coordination

N-fused isophlorin 3 and its tautomeric phlorin forms 4 and 5, the new constitutional isomers of porphyrin which preserve the basic skeleton of their maternal N-fused porphyrin, have been identified in the course of investigation of phosphorus insertion into N-fused porphyrin 2. N-fused porphyrin reacts with PCl3 in toluene yielding phosphorus(V) N-fused isophlorin 3-P wherein the macrocycle acts as a trianionic tridentate ligand. The identical product has been formed in the reaction of N-confused porphyrin 1 and POCl3 or PCl3. The coordinating environment of phosphorus(V) in 3-P as determined by X-ray crystallography resembles a distorted trigonal pyramid with the nitrogen atoms occupying equatorial positions with the oxygen atom lying at the unique apex. Phosphorus(V) is significantly displaced by 0.732(1) A from the N3 plane. The P-N distances are as follows P-N(22) 1.664(2), P-N(23) 1.645(2), and P-N(24) 1.672(2). All P-N(pyrrolic) bond lengths are markedly shorter than the P-N distances in phosphorus porphyrins. 3-P is susceptible to proton addition at the inner C(9) carbon atom, yielding aromatic 4-P. The modified macrocycle acts as a dianionic ligand and allows the efficient 18 pi-electron delocalization pathway. Two stereoisomers affording the syn (4-P syn) and anti (4-P anti) location of the H(9) atom with respect to the oxygen atom of the PO unit have been identified by (1)H NMR. A regioselective reduction of free base N-fused porphyrin 2 with NaBH4 yielded a nonaromatic isomer of 4, that is, N-fused phlorin 5 due to an addition of a hydride to the C(15) carbon and a proton to one of the pyrrolic nitrogens. The isomer 5 reacts with PCl 3 yielding phosphorus(V) fused isophlorin 3-P. Density functional theory has been applied to model the molecular and electronic structure of porphyrin isomers 3, 4, and 5 and their phosphorus(V) complexes.     

Potential energy surface for activation of methane by Pt(+): a combined guided ion beam and DFT study

A guided-ion beam tandem mass spectrometer is used to study the reactions of Pt(+) with methane, PtCH(2)(+) with H(2) and D(2), and collision-induced dissociation of PtCH(4)(+) and PtCH(2)(+) with Xe. These studies experimentally probe the potential energy surface for the activation of methane by Pt(+). For the reaction of Pt(+) with methane, dehydrogenation to form PtCH(2)(+) + H(2) is exothermic, efficient, and the only process observed at low energies. PtH(+), formed in a simple C-H bond cleavage, dominates the product spectrum at high energies. The observation of a PtH(2)(+) product provides evidence that methane activation proceeds via a (H)(2)PtCH(2)(+) intermediate. Modeling of the endothermic reaction cross sections yields the 0 K bond dissociation energies in eV (kJ/mol) of D(0)(Pt(+)-H) = 2.81 +/- 0.05 (271 +/- 5), D(0)(Pt(+)-2H) = 6.00 +/- 0.12 (579 +/- 12), D(0)(Pt(+)-C) = 5.43 +/- 0.05 (524 +/- 5), D(0)(Pt(+)-CH) = 5.56 +/- 0.10 (536 +/- 10), and D(0)(Pt(+)-CH(3)) = 2.67 +/- 0.08 (258 +/- 8). D(0)(Pt(+)-CH(2)) = 4.80 +/- 0.03 eV (463 +/- 3 kJ/mol) is determined by measuring the forward and reverse reaction rates for Pt(+) + CH(4) right harpoon over left harpoon PtCH(2)(+) + H(2) at thermal energy. We find extensive hydrogen scrambling in the reaction of PtCH(2)(+) with D(2). Collision-induced dissociation (CID) of PtCH(4)(+), identified as the H-Pt(+)-CH(3) intermediate, with Xe reveals a bond energy of 1.77 +/- 0.08 eV (171 +/- 8 kJ/mol) relative to Pt(+) + CH(4). The experimental thermochemistry is favorably compared with density functional theory calculations (B3LYP using several basis sets), which also establish the electronic structures of these species and provide insight into the reaction mechanism. Results for the reaction of Pt(+) with methane are compared with those for the analogous palladium system and the differences in reactivity and mechanism are discussed.     

Theoretical and experimental consideration of the reactions between VxOy+ and ethylene

We present joint theoretical and experimental results which provide evidence for the selectivity of V(x)O(y)(+) clusters in reactions toward ethylene due to the charge and different oxidation states of vanadium for different cluster sizes. Density functional calculations were performed on the reactions between V(x)O(y)(+) and ethylene, allowing us to identify the structure-reactivity relationship and to corroborate the experimental results obtained by Castleman and co-workers (Zemski, K. A.; Justes, D. R.; Castleman, A. W., Jr. J. Phys. Chem. A 2001, 105, 10237). The lowest-energy structures for the V(2)O(2)(-)(6)(+) and V(4)O(8)(-)(10)(+) clusters and the V(2)O(3)(-)(6)(+)-C(2)H(4) and V(4)O(10)(+)-C(2)H(4) complexes, as well as the energetics for reactions between ethylene and V(2)O(4)(-)(6)(+) and V(4)O(10)(+) are presented here. The oxygen transfer reaction pathway was determined to be the most energetically favorable one available to V(2)O(5)(+) and V(4)O(10)(+) via a radical-cation mechanism.The association and replacement reaction pathways were found to be the optimal channels for V(2)O(4)(+) and V(2)O(6)(+), respectively. These results are in agreement with the experimental results reported previously. Experiments were also conducted for the reactions between V(2)O(5)(+) and ethylene to include an energetic analysis at increasing pressures. It was found that the addition of energy depleted the production of V(2)O(4)(+), confirming that a more involved reaction rather than a collisional process is responsible for the observed phenomenon. In this contribution we show that investigation of reactions involving gas-phase cationic vanadium oxide clusters with small hydrocarbons is suitable for the identification of reactive centers responsible for selectivity in heterogeneous catalysis.