Porous ZnO/Co3O4/N‐doped carbon nanocages synthesized via pyrolysis of complex metal–organic framework (MOF) hybrids as an advanced lithium‐ion battery anode

Metal oxides have a large storage capacity when employed as anode materials for lithium‐ion batteries (LIBs). However, they often suffer from poor capacity retention due to their low electrical conductivity and huge volume variation during the charge–discharge process. To overcome these limitations, fabrication of metal oxides/carbon hybrids with hollow structures can be expected to further improve their electrochemical properties. Herein, ZnO‐Co₃O₄ nanocomposites embedded in N‐doped carbon (ZnO‐Co₃O₄@N‐C) nanocages with hollow dodecahedral shapes have been prepared successfully by the simple carbonizing and oxidizing of metal–organic frameworks (MOFs). Benefiting from the advantages of the structural features, i.e. the conductive N‐doped carbon coating, the porous structure of the nanocages and the synergistic effects of different components, the as‐prepared ZnO‐Co₃O₄@N‐C not only avoids particle aggregation and nanostructure cracking but also facilitates the transport of ions and electrons. As a result, the resultant ZnO‐Co₃O₄@N‐C shows a discharge capacity of 2373 mAh g^?1 at the first cycle and exhibits a retention capacity of 1305 mAh g^?1 even after 300 cycles at 0.1 A g^?1. In addition, a reversible capacity of 948 mAh g^?1 is obtained at a current density of 2 A g^?1, which delivers an excellent high‐rate cycle ability.     

Two‐Dimensional Cobalt‐/Nickel‐Based Oxide Nanosheets for High‐Performance Sodium and Lithium Storage

Two‐dimensional (2D) nanomaterials are one of the most promising types of candidates for energy‐storage applications due to confined thicknesses and high surface areas, which would play an essential role in enhanced reaction kinetics. Herein, a universal process that can be extended for scale up is developed to synthesise ultrathin cobalt‐/nickel‐based hydroxides and oxides. The sodium and lithium storage capabilities of Co₃O₄ nanosheets are evaluated in detail. For sodium storage, the Co₃O₄ nanosheets exhibit excellent rate capability (e.g., 179 mA h g^?1 at 7.0 A g^?1 and 150 mA h g^?1 at 10.0 A g^?1) and promising cycling performance (404 mA h g^?1 after 100 cycles at 0.1 A g^?1). Meanwhile, very impressive lithium storage performance is also achieved, which is maintained at 1029 mA h g^?1 after 100 cycles at 0.2 A g^?1. NiO and NiCo₂O₄ nanosheets are also successfully prepared through the same synthetic approach, and both deliver very encouraging lithium storage performances. In addition to rechargeable batteries, 2D cobalt‐/nickel‐based hydroxides and oxides are also anticipated to have great potential applications in supercapacitors, electrocatalysis and other energy‐storage‐/‐conversion‐related fields.     

A Core–Shell Fe/Fe2O3 Nanowire as a High‐Performance Anode Material for Lithium‐Ion Batteries

The preparation of novel one‐dimensional core–shell Fe/Fe₂O₃ nanowires as anodes for high‐performance lithium‐ion batteries (LIBs) is reported. The nanowires are prepared in a facile synthetic process in aqueous solution under ambient conditions with subsequent annealing treatment that could tune the capacity for lithium storage. When this hybrid is used as an anode material for LIBs, the outer Fe₂O₃ shell can act as an electrochemically active material to store and release lithium ions, whereas the highly conductive and inactive Fe core functions as nothing more than an efficient electrical conducting pathway and a remarkable buffer to tolerate volume changes of the electrode materials during the insertion and extraction of lithium ions. The core–shell Fe/Fe₂O₃ nanowire maintains an excellent reversible capacity of over 767 mA h g^?1 at 500 mA g^?1 after 200 cycles with a high average Coulombic efficiency of 98.6 %. Even at 2000 mA g^?1, a stable capacity as high as 538 mA h g^?1 could be obtained. The unique composition and nanostructure of this electrode material contribute to this enhanced electrochemical performance. Due to the ease of large‐scale fabrication and superior electrochemical performance, these hybrid nanowires are promising anode materials for the next generation of high‐performance LIBs.     

Reduced Graphene Oxide‐Supported TiO2 Fiber Bundles with Mesostructures as Anode Materials for Lithium‐Ion Batteries

Although the synthesis of mesoporous materials is well established, the preparation of TiO₂ fiber bundles with mesostructures, highly crystalline walls, and good thermal stability on the RGO nanosheets remains a challenge. Herein, a low‐cost and environmentally friendly hydrothermal route for the synthesis of RGO nanosheet‐supported anatase TiO₂ fiber bundles with dense mesostructures is used. These mesostructured TiO₂‐RGO materials are used for investigation of Li‐ion insertion properties, which show a reversible capacity of 235 mA h g^?1 at 200 mA g^?1 and 150 mA h g^?1 at 1000 mA g^?1 after 1000 cycles. The higher specific surface area of the new mesostructures and high conductive substrate (RGO nanosheets) result in excellent lithium storage performance, high‐rate performance, and strong cycling stability of the TiO₂‐RGO composites.     

Hermetically Coated and Well‐Separated Co3O4 Nanophase within Porous Graphitic Carbon Nanosheets: Synthesis,Confinement Effect,and Improved Lithium‐Storage Capacity and Durability

Considerable lithium‐driven volume changes and loss of crystallinity on cycling have impeded the sustainable use of transition metal oxides (MOs) as attractive anode materials for advanced lithium‐ion batteries that have almost six times the capacity of carbon per unit volume. Herein, Co₃O₄ was used as a model MO in a facile process involving two pyrolysis steps for in situ encapsulation of nanosized MO in porous two‐dimensional graphitic carbon nanosheets (2D‐GCNs) with high surface areas and abundant active sites to overcome the above‐mentioned problems. The proposed method is inexpensive, industrially scalable, and easy to operate with a high yield. TEM revealed that the encaged Co₃O₄ is well separated and uniformly dispersed with surrounding onionlike graphitic layers. By taking advantage of the high electronic conductivity and confinement effect of the surrounding 2D‐GCNs, a hierarchical GCNs‐coated Co₃O₄ (Co₃O₄@GCNs) anode with 43.5 wt % entrapped active nanoparticles delivered a remarkable initial specific capacity of 1816 mAh g^?1 at a current density of 100 mA g^?1. After 50 cycles, the retained capacity is as high as 987 mAh g^?1. When the current density was increased to 1000 mA g^?1, the anode showed a capacity retention of 416 mAh g^?1. Enhanced reversible rate capability and prolonged cycling stability were found for Co₃O₄@GCN compared to pure GCNs and Co₃O₄. The Co₃O₄@GCNs hybrid holds promise as an efficient candidate material for anodes due to its low cost, environmentally friendly nature, high capacity, and stability.     

Self‐Assembling Synthesis of Free‐standing Nanoporous Graphene–Transition‐Metal Oxide Flexible Electrodes for High‐Performance Lithium‐Ion Batteries and Supercapacitors

The synthesis of nanoporous graphene by a convenient carbon nanofiber assisted self‐assembly approach is reported. Porous structures with large pore volumes, high surface areas, and well‐controlled pore sizes were achieved by employing spherical silica as hard templates with different diameters. Through a general wet‐immersion method, transition‐metal oxide (Fe₃O₄, Co₃O₄, NiO) nanocrystals can be easily loaded into nanoporous graphene papers to form three‐dimensional flexible nanoarchitectures. When directly applied as electrodes in lithium‐ion batteries and supercapacitors, the materials exhibited superior electrochemical performances, including an ultra‐high specific capacity, an extended long cycle life, and a high rate capability. In particular, nanoporous Fe₃O₄–graphene composites can deliver a reversible specific capacity of 1427.5 mAh g^?1 at a high current density of 1000 mA g^?1 as anode materials in lithium‐ion batteries. Furthermore, nanoporous Co₃O₄–graphene composites achieved a high supercapacitance of 424.2 F g^?1. This work demonstrated that the as‐developed freestanding nanoporous graphene papers could have significant potential for energy storage and conversion applications.     

K2Mn4O8/Reduced Graphene Oxide Nanocomposites for Excellent Lithium Storage and Adsorption of Lead Ions

Ion diffusion efficiency at the solid–liquid interface is an important factor for energy storage and adsorption from aqueous solution. Although K₂Mn₄O₈ (KMO) exhibits efficient ion diffusion and ion‐exchange capacities, due to its high interlayer space of 0.70 nm, how to enhance its mass transfer performance is still an issue. Herein, novel layered KMO/reduced graphene oxide (RGO) nanocomposites are fabricated through the anchoring of KMO nanoplates on RGO with a mild solution process. The face‐to‐face structure facilitates fast transfer of lithium and lead ions; thus leading to excellent lithium storage and lead ion adsorption. The anchoring of KMO on RGO not only increases electrical conductivity of the layered nanocomposites, but also effectively prevents aggregation of KMO nanoplates. The KMO/RGO nanocomposite with an optimal RGO content exhibits a first cycle charge capacity of 739 mA h g^?1, which is much higher than that of KMO (326 mA h g^?1). After 100 charge–discharge cycles, it still retains a charge capacity of 664 mA h g^?1. For the adsorption of lead ions, the KMO/RGO nanocomposite exhibits a capacity of 341 mg g^?1, which is higher than those of KMO (305 mg g^?1) and RGO (63 mg g^?1) alone.     

One‐Pot Method for Synthesizing Spherical‐Like Metal Sulfide–Reduced Graphene Oxide Composite Powders with Superior Electrochemical Properties for Lithium‐Ion Batteries

A facile, one‐pot method for synthesizing spherical‐like metal sulfide–reduced graphene oxide (RGO) composite powders by spray pyrolysis is reported. The direct sulfidation of ZnO nanocrystals decorated on spherical‐like RGO powders resulted in ZnS–RGO composite powders. ZnS nanocrystals with a size below 20 nm were uniformly dispersed on spherical‐like RGO balls. The discharge capacities of the ZnS–RGO, ZnO–RGO, bare ZnS, and bare ZnO powders at a current density of 1000 mA g^?1 after 300 cycles were 628, 476, 230, and 168 mA h g^?1, respectively, and the corresponding capacity retentions measured after the first cycles were 93, 70, 40, and 21 %, respectively. The discharge capacity of the ZnS–RGO composite powders at a high current density of 4000 mA g^?1 after 700 cycles was 437 mA h g^?1. The structural stability of the highly conductive ZnS–RGO composite powders with ultrafine crystals during cycling resulted in excellent electrochemical properties.     

Preparation of Yolk‐Shell and Filled Co9S8 Microspheres and Comparison of their Electrochemical Properties

In this study, we report the first preparation of phase‐pure Co₉S₈ yolk–shell microspheres in a facile two‐step process and their improved electrochemical properties. Yolk–shell Co₃O₄ precursor microspheres are initially obtained by spray pyrolysis and are subsequently transformed into Co₉S₈ yolk–shell microspheres by simple sulfidation in the presence of thiourea as a sulfur source at 350 °C under a reducing atmosphere. For comparison, filled Co₉S₈ microspheres were also prepared using the same procedure but in the absence of sucrose during the spray pyrolysis. The prepared yolk–shell Co₉S₈ microspheres exhibited a Brunauer–Emmett–Teller (BET) specific surface area of 18 m² g^?1 with a mean pore size of 16 nm. The yolk–shell Co₉S₈ microspheres have initial discharge and charge capacities of 1008 and 767 mA h g^?1 at a current density of 1000 mA g^?1, respectively, while the filled Co₉S₈ microspheres have initial discharge and charge capacities of 838 and 638 mA h g^?1, respectively. After 100 cycles, the discharge capacities of the yolk–shell and filled microspheres are 634 and 434 mA h g^?1, respectively, and the corresponding capacity retentions after the first cycle are 82 % and 66 %.     

Flame Spray Pyrolysis for Finding Multicomponent Nanomaterials with Superior Electrochemical Properties in the CoOx‐FeOx System for Use in Lithium‐Ion Batteries

High‐temperature flame spray pyrolysis is employed for finding highly efficient nanomaterials for use in lithium‐ion batteries. CoO_x‐FeO_x nanopowders with various compositions are prepared by one‐pot high‐temperature flame spray pyrolysis. The Co and Fe components are uniformly distributed over the CoO_x‐FeO_x composite powders, irrespective of the Co/Fe mole ratio. The Co‐rich CoO_x‐FeO_x composite powders with Co/Fe mole ratios of 3:1 and 2:1 have mixed crystal structures with CoFe₂O₄ and Co₃O₄ phases. However, Co‐substituted magnetite composite powders prepared from spray solutions with Co and Fe components in mole ratios of 1:3, 1:2, and 1:1 have a single phase. Multicomponent CoO_x‐FeO_x powders with a Co/Fe mole ratio of 2:1 and a mixed crystal structure with Co₃O₄ and CoFe₂O₄ phases show high initial capacities and good cycling performance. The stable reversible discharge capacities of the composite powders with a Co/Fe mole ratio of 2:1 decrease from 1165 to 820 mA h g^?1 as the current density is increased from 500 to 5000 mA g^?1; however, the discharge capacity again increases to 1310 mA h g^?1 as the current density is restored to 500 mA g^?1.     

Synthesis of Cobalt Ion‐Based Coordination Polymer Nanowires and Their Conversion into Porous Co3O4 Nanowires with Good Lithium Storage Properties

Cobalt ion‐based coordination polymer nanowires were synthesized by using nitrilotriacetic acid (NA) as a chelating agent by a one‐step hydrothermal approach. In the synthesis, cobalt ions were bonded with amino or carboxyl groups of NA to form one‐dimension polymer nanowires, which can be confirmed by FTIR and TGA results. Our experimental results show that the morphologies of polymer nanowires greatly depend on the precursor salts, ratios between deionized water and isopropyl alcohol. The probable molecular formula and growth mechanism have been proposed. After heat treatment, the cobalt ion‐based coordination polymer nanowires can be converted into porous Co₃O₄ nanowires, which completely preserved the nanowire‐like morphology. When used as anodes in lithium‐ion batteries, the obtained porous Co₃O₄ nanowires exhibited a high reversible capacity of 810 mA h g^?1 and stable cyclic retention at 30th cycle. The good electrochemical performance could be attributed to the porous nanostructure of Co₃O₄, which provides pathways for easy accessibility of electrolytes and fast transportation of lithium ions.     

Preparation of a Reduced Graphene Oxide Wrapped Lithium‐Rich Cathode Material by Self‐Assembly

A lithium‐rich cathode material wrapped in sheets of reduced graphene oxide (RGO) and functionalized with polydiallyldimethylammonium chloride (PDDA) was prepared by self‐assembly induced from the electrostatic interaction between PDDA–RGO and the Li‐rich cathode material. At current densities of 1000 and 2000 mA g^?1, the PDDA–RGO sheet wrapped samples demonstrated increased discharge capacities, increasing from 125 to 155 mA h g^?1 and from 82 to 124 mA h g^?1, respectively. The decreased resistance implied by this result was confirmed from electrochemical impedance spectroscopy results, wherein the charge‐transfer resistance of the pristine sample decreased after wrapping with the PDDA–RGO sheets. The PDDA–RGO sheets served as a protective layer sand as a conductive material, which resulted in an improvement in the retention capacity from 56 to 81 % after 90 cycles.     

Cobalt–Manganese Mixed‐Sulfide Nanocages Encapsulated by Reduced Graphene Oxide: In Situ Sacrificial Template Synthesis and Superior Lithium Storage Properties

This work demonstrates a facile in situ synthesis of cobalt–manganese mixed sulfide (CoMn‐S) nanocages on reduced graphene oxide (RGO) sheets by using a crystalline Co–Mn precursor as the sacrificial template. The CoMn‐S/RGO hybrid was applied as the anode for Li‐ion storage and exhibited superior specific capacity, excellent cycling performance, and great rate capability. In particular, lithium storage testing revealed that the hybrid delivered high discharge–charge capacities of 670 mA h g⁻¹ at 1.0 A g⁻¹ after 400 cycles and 925 mA h g⁻¹ at 0.1 A g⁻¹ after 300 cycles. The outstanding electrochemical performance of CoMn‐S/RGO is attributed to the close entanglement of nanocages with RGO nanosheets achieved by the synthetic method, which greatly improves ion/electron transport along the interfaces and efficiently mitigates volume dilation during lithium reactions. This rational design of both the composition and architecture of mixed metal sulfides can be expanded to other composite systems for high‐capacity Li‐ion batteries and provides a unique insight into the development of advanced hybrid electrode materials.     

Hierarchical ZnCo2O4@NiCo2O4 Core–Sheath Nanowires: Bifunctionality towards High‐Performance Supercapacitors and the Oxygen‐Reduction Reaction

Increasing energy demands and worsening environmental issues have stimulated intense research on alternative energy storage and conversion systems including supercapacitors and fuel cells. Here, a rationally designed hierarchical structure of ZnCo₂O₄@NiCo₂O₄ core–sheath nanowires synthesized through facile electrospinning combined with a simple co‐precipitation method is proposed. The obtained core–sheath nanostructures consisting of mesoporous ZnCo₂O₄ nanowires as the core and uniformly distributed ultrathin NiCo₂O₄ nanosheets as the sheath, exhibit excellent electrochemical activity as bifunctional materials for supercapacitor electrodes and oxygen reduction reaction (ORR) catalysts. Compared with the single component of either ZnCo₂O₄ nanowires or NiCo₂O₄ nanosheets, the hierarchical ZnCo₂O₄@NiCo₂O₄ core–sheath nanowires demonstrate higher specific capacitance of 1476 F g^?1 (1 A g^?1) and better rate capability of 942 F g^?1 (20 A g^?1), while maintaining 98.9 % capacity after 2000 cycles at 10 A g^?1. Meanwhile, the ZnCo₂O₄@NiCo₂O₄ core–sheath nanowires reveal comparable catalytic activity but superior stability and methanol tolerance over Pt/C as ORR catalyst. The impressive performance may originate from the unique hierarchical core–sheath structures that greatly facilitate enhanced reactivity, and faster ion and electron transfer.     

Self‐Template Synthesis of Hybrid Porous Co3O4–CeO2 Hollow Polyhedrons for High‐Performance Supercapacitors

In this work, hybrid porous Co₃O₄–CeO₂ hollow polyhedrons have been successfully obtained via a simple cation‐exchange route followed by heat treatment. In the synthesis process, ZIF‐67 polyhedron frameworks are firstly prepared, which not only serve as a host for the exchanged Ce3⁺ ions but also act as the template for the synthesis of hybrid porous Co₃O₄–CeO₂ hollow polyhedrons. When utilized as electrode materials for supercapacitors, the hybrid porous Co₃O₄–CeO₂ hollow polyhedrons delivered a large specific capacitance of 1288.3 F g^?1 at 2.5 A g^?1 and a remarkable long lifespan cycling stability (<3.3 % loss after 6000 cycles). Furthermore, an asymmetric supercapacitor (ASC) device based on hybrid porous Co₃O₄–CeO₂ hollow polyhedrons was assembled. The ASC device possesses an energy density of 54.9 W h kg^?1, which can be retained to 44.2 W h kg^?1 even at a power density of 5100 W kg^?1, indicating its promising application in electrochemical energy storage. More importantly, we believe that the present route is a simple and versatile strategy for the preparation of other hybrid metal oxides with desired structures, chemical compositions and applications.     

Reduced Graphene Oxide–Ag3PO4 Heterostructure: A Direct Z‐Scheme Photocatalyst for Augmented Photoreactivity and Stability

A visible light driven, direct Z‐scheme reduced graphene oxide–Ag₃PO₄ (RGO–Ag₃PO₄) heterostructure was synthesized by means of a simple one‐pot photoreduction route by varying the amount of RGO under visible light illumination. The reduction of graphene oxide (GO) and growth of Ag₃PO₄ took place simultaneously. The effect of the amount of RGO on the textural properties and photocatalytic activity of the heterostructure was investigated under visible light illumination. Furthermore, total organic carbon (TOC) analysis confirmed 97.1 % mineralization of organic dyes over RGO–Ag₃PO₄ in just five minutes under visible‐light illumination. The use of different quenchers in the photomineralization suggested the presence of hydroxyl radicals ( ^. OH), superoxide radicals ( ^. O₂^?), and holes (h⁺), which play a significant role in the mineralization of organic dyes. In addition to that, clean hydrogen fuel generation was also observed with excellent reusability. The 4 RGO–Ag₃PO₄ heterostructure has a high H₂ evolution rate of 3690 μmol h^?1 g^?1, which is 6.15 times higher than that of RGO.     

A Robust Solid Electrolyte Interphase Layer Augments the Ion Storage Capacity of Bimetallic‐Sulfide‐Containing Potassium‐Ion Batteries

Metal–organic framework‐derived NiCo_2.5S₄ microrods wrapped in reduced graphene oxide (NCS@RGO) were synthesized for potassium‐ion storage. Upon coordination with organic potassium salts, NCS@RGO exhibits an ultrahigh initial reversible specific capacity (602 mAh g^?1 at 50 mA g^?1) and ultralong cycle life (a reversible specific capacity of 495 mAh g^?1 at 200 mA g^?1 after 1 900 cycles over 314 days). Furthermore, the battery demonstrates a high initial Coulombic efficiency of 78 %, outperforming most sulfides reported previously. Advanced ex situ characterization techniques, including atomic force microscopy, were used for evaluation and the results indicate that the organic potassium salt‐containing electrolyte helps to form thin and robust solid electrolyte interphase layers, which reduce the formation of byproducts during the potassiation–depotassiation process and enhance the mechanical stability of electrodes. The excellent conductivity of the RGO in the composites, and the robust interface between the electrodes and electrolytes, imbue the electrode with useful properties; including, ultrafast potassium‐ion storage with a reversible specific capacity of 402 mAh g^?1 even at 2 A g^?1.     

Highly Reversible Lithium Storage in Hierarchical Ca2Ge7O16 Nanowire Arrays/Carbon Textile Anodes

Aligned Ca₂Ge₇O₁₆ nanowire arrays were successfully grown on carbon textiles to form hierarchical 3D structures by using a facile hydrothermal method on a large scale. Typical Ca₂Ge₇O₁₆ nanowires are single crystals that show preferred growth along the [001] direction. The 3D hierarchical structures were used as binder‐free anodes for lithium‐ion batteries, which showed the features of highly reversible capacity (900–1100 mA h g^?1 at a current density of 300 mA g^?1), remarkable cycling stability, even over 100 cycles, and good rate capability, with a capacity of about 500 mA h g^?1 at 3 A g^?1. Furthermore, highly bendable full cells were also fabricated, which showed high flexibility, with little voltage change after bending 600 times, and superior temperature tolerance within the range 4–60 °C, thus demonstrating their promising potential for applications in high‐performance lithium‐ion batteries.     

CNT@Fe3O4@C Coaxial Nanocables: One‐Pot,Additive‐Free Synthesis and Remarkable Lithium Storage Behavior

By using carbon nanotubes (CNTs) as a shape template and glucose as a carbon precursor and structure‐directing agent, CNT@Fe₃O₄@C porous core/sheath coaxial nanocables have been synthesized by a simple one‐pot hydrothermal process. Neither a surfactant/ligand nor a CNT pretreatment is needed in the synthetic process. A possible growth mechanism governing the formation of this nanostructure is discussed. When used as an anode material of lithium‐ion batteries, the CNT@Fe₃O₄@C nanocables show significantly enhanced cycling performance, high rate capability, and high Coulombic efficiency compared with pure Fe₂O₃ particles and Fe₃O₄/CNT composites. The CNT@Fe₃O₄@C nanocables deliver a reversible capacity of 1290 mA h g^?1 after 80 cycles at a current density of 200 mA g^?1, and maintain a reversible capacity of 690 mA h g^?1 after 200 cycles at a current density of 2000 mA g^?1. The improved lithium storage behavior can be attributed to the synergistic effect of the high electronic conductivity support and the inner CNT/outer carbon buffering matrix.     

One‐Pot Synthesis of Pomegranate‐Structured Fe3O4/Carbon Nanospheres‐Doped Graphene Aerogel for High‐Rate Lithium Ion Batteries

A unique hierarchically nanostructured composite of iron oxide/carbon (Fe₃O₄/C) nanospheres‐doped three‐dimensional (3D) graphene aerogel has been fabricated by a one‐pot hydrothermal strategy. In this novel nanostructured composite aerogel, uniform Fe₃O₄ nanocrystals (5–10 nm) are individually embedded in carbon nanospheres (ca. 50 nm) forming a pomegranate‐like structure. The carbon matrix suppresses the aggregation of Fe₃O₄ nanocrystals, avoids direct exposure of the encapsulated Fe₃O₄ to the electrolyte, and buffers the volume expansion. Meanwhile, the interconnected 3D graphene aerogel further serves to reinforce the structure of the Fe₃O₄/C nanospheres and enhances the electrical conductivity of the overall electrode. Therefore, the carbon matrix and the interconnected graphene network entrap the Fe₃O₄ nanocrystals such that their electrochemical function is retained even after fracture. This novel hierarchical aerogel structure delivers a long‐term stability of 634 mA h g^?1 over 1000 cycles at a high current density of 6 A g^?1 (7 C), and an excellent rate capability of 413 mA h g^?1 at 10 A g^?1 (11 C), thus exhibiting great potential as an anode composite structure for durable high‐rate lithium‐ion batteries.