Preparation of a Highly Fluorophilic Phosphonium Salt and its Use in a Fluorous Anion-Exchanger Membrane with High Selectivity for Perfluorinated Acids

Fluorous solvents are the most nonpolar, nonpolarizable phases known, whereas ions are inherently polar. This makes it difficult to create salts that are soluble in a fluorous solvent. Here we present the synthesis and characterization of a new fluorophilic phosphonium salt, tris{3,5-bis[(perfluorooctyl)propyl]phenyl}methylphosphonium methyl sulfate. The salt has a solubility of at least 14 mM in perfluoro(perhydrophenanthrene), perfluoro(methylcyclohexane), and perfluorohexanes. It also shows immediate potential for use as a phase-transfer catalyst in fluorous biphasic catalysis, but in this work it is used as an anion-exchanger site in the first potentiometric fluorous-membrane anion-selective electrode. The membrane sensor exhibited the exceptional selectivity of 3.9 × 10¹⁰ to 1 for perfluorooctanesulfonate over chloride, and of 2.5 × 10⁷ to 1 for perfluorooctanoate over chloride. With improvements to the sensor's detection limit and lifetime, it has the potential to be an attractive alternative to the expensive, time-consuming methods currently employed for measurement of perfluorinated acids.     

Fullerene‐Crown Ether Coated Piezoelectric Crystal Liquid Chromatographic Detector for Metal Ions and Polar/Nonpolar Organic Molecules

Fullerene(C60)‐dibenzo‐16‐crown‐5‐oxyacetic acid (DBI6C5‐OCH₂‐COOC₆₀) was prepared and applied as the coating material on piezoelectric quartz crystals for detection of various metal ions and polar/nonpolar organic molecules. The C60‐crown ether‐coated piezoelectric crystal sensor with a home‐made computer interface for signal acquisition and data processing was applied as an ion chromatographic (IC) detector for various metal ions, e.g., alkali metal, alkaline earth metal and transition‐metal ions. The piezoelectric detector exhibited quite good sensitivity of 10⁴ ～ 10⁶ Hz/M and good detection limit of 10^?3 ～ 10^?4 M for these metal ions. The C60‐crown ether piezoelectric detector compared well with the commercial conductivity detector conventionally used for metal ions. The ionic size and ionic charge seemed to have significant effect on the frequency response of the piezoelectric detector. The C60‐crown ether coated piezoelectric crystal sensor was also employed as a high performance liquid chromatographic (HPLC) detector for various polar organic molecules with frequency responses in the order: amines > carboxylic acids > alcohols > ketones. Furthermore, nonpolar organic molecules, e.g., n‐hexane, 1‐hexene and 1‐hexyne, were also detected with this piezoelectric crystal detector. The frequency responses of the piezoelectric crystal detector for these nonpolar organic molecules were in the following order: alkynes > alkenes > alkanes. The effects of solvents and flow rate on the frequency responses of the piezoelectric crystal detector were investigated. The C60‐crown ether coated piezoelectric crystal detector also showed short response time (< 1 min.) and good reproducibility.     

Reaction of halogens with copper(II) bis(diethyldithiocarbamate)

Conclusions It was established by EPR spectroscopy that the reaction of halogens with Cu(dtc)₂ has redox character in polar and nonpolar solvents. However, the ligand is oxidized in a polar solvent, and new complexes of copper(II), the coordination sphere of which is formed via different combinations of solvent molecules, halide ions, and dtc^–, are formed as a result of intraspheral transformations.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2484–2488, November, 1988.     

An efficient multiple-mode molecular logic system for pH, solvent polarity, and Hg ions

A novel fluorophore 1,3-bis(1,1,3-trimethyl-1H-benzo[e]indol-2(3H)-ylidene)propan-2-one (L) was synthesized and fully characterized by ¹H NMR, ¹³C NMR, HRMS, and X-ray single-crystal structural analysis. Compound L is a pH-controlled molecular switch due to its protonation. The fluorescence change in protic polar solvents means that this compound also could be used as a protic solvent polarity sensor. Among the considered metal ions, the fluorescence of compound L could be quenched completely by Hg²⁺ ions with a high selectivity. Based on these fluorescence characters, this fluorescent dye L has promising applications as a multiple-mode molecular logic system.     

Phosphotungstic acid as a versatile catalyst for the synthesis of fragrance compounds by alpha-pinene oxide isomerization: solvent-induced chemoselectivity

The remarkable effect of the solvent on the catalytic performance of H3PW12O40, the strongest heteropoly acid in the Keggin series, allows direction of the transformations of alpha-pinene oxide (1) to either campholenic aldehyde (2), trans-carveol (3), trans-sobrerol (4 a), or pinol (5). Each of these expensive fragrance compounds was obtained in good to excellent yields by using an appropriate solvent. Solvent polarity and basicity strongly affect the reaction pathways: nonpolar nonbasic solvents favor the formation of aldehyde 2; polar basic solvents favor the formation of alcohol 3; whereas in polar weakly basic solvents, the major products are compounds 4 a and 5. On the other hand, in 1,4-dioxane, which is a nonpolar basic solvent, both aldehyde 2 and alcohol 3 are formed in comparable amounts. The use of very low catalyst loading (0.005-1 mol %) and the possibility of catalyst recovery and recycling without neutralization are significant advantages of this simple, environmentally benign, and low-cost method. This method represents the first example of the synthesis of isomers from alpha-pinene oxide, other than campholenic aldehyde, with a selectivity that is sufficient for practical usage.     

How To Make Nitroaromatic Compounds Glow: Next-Generation Large X-Shaped,Centrosymmetric Diketopyrrolopyrroles

Red-emissive π-expanded diketopyrrolopyrroles (DPPs) with fluorescence reaching λ=750 nm can be easily synthesized by a three-step strategy involving the preparation of diketopyrrolopyrrole followed by N-arylation and subsequent intramolecular palladium-catalyzed direct arylation. Comprehensive spectroscopic assays combined with first-principles calculations corroborated that both N-arylated and fused DPPs reach a locally excited (S₁) state after excitation, followed by internal conversion to states with solvent and structural relaxation, before eventually undergoing intersystem crossing. Only the structurally relaxed state is fluorescent, with lifetimes in the range of several nanoseconds and tens of picoseconds in nonpolar and polar solvents, respectively. The lifetimes correlate with the fluorescence quantum yields, which range from 6 % to 88 % in nonpolar solvents and from 0.4 % and 3.2 % in polar solvents. A very inefficient (T₁) population is responsible for fluorescence quantum yields as high as 88 % for the fully fused DPP in polar solvents.     

分子烙印聚合物作为高效毛细管电泳添加剂的研究

分子洛印聚合物（molecular imprinted polymer)是一种高选择的有分子记忆效应的主体分子,通常在非极性环境中制备和应用。该文在极性溶剂中利用离子化作用和疏水作用制备了非共价的分子烙印聚合物,并将其作为高效毛细管电泳流动相添加剂;在含水缓冲溶液条件下,研究了单体种类、分子烙印聚合物颗粒度和含量、缓冲溶液pH值以及分离电压对分子烙印聚合物识别模板分子的影响。结果证明了在质子溶剂中制备和应用非共价分子烙印聚合物是可行的。     

Synthesis and evaluation of silica hydride‐based fluorinated stationary phases

Two novel silica hydride‐based fluorinated bonded phases have been synthesized using a hydrosilation procedure to test combined fluorine and hydride selectivity. The bonded moieties were characterized by elemental and spectral analysis. Chromatographic testing was done using hydrophilic analytes in the aqueous normal phase mode. At higher amounts of the nonpolar solvent in the mobile phase, there should be increased retention for solutes such as acids, bases and other polar compounds, whereas nonpolar solutes can be retained when water is increased as in RP chromatography. The synergistic effects of the fluorinated phase selectivity and aqueous normal phase retention on a hydride surface have been explored for small polar molecules. The stability and repeatability of the hydride‐based fluorinated stationary phases were evaluated. The use of acetone as the organic component in the mobile phase was also tested.     

Low molecular weight organogelators derived from threefold symmetric tricarbamates

A group of new low molecular weight organogelators based on threefold symmetric tricarbamate were synthesized and characterized. The tricarbamates with long alkyl chains were able to gelate a wide range of polar and nonpolar organic solvents such as acetonitrile and cyclohexane, generally at concentrations lower than 20 g/L. The best organogel formation was obtained using a threefold symmetric tricarbamate in n-dodecane, in which a sufficiently transparent gel was formed at the critical gelation concentration 1 g/L. Intermolecular hydrogen bonding by the tricarbamate in a nonpolar solvent benzene-d₆ was indicated by ¹H NMR spectra. Its maximum UV absorption was 11 nm higher in chloroform than in n-dodecane, and this red shift indicated increased conjugation between the benzene core and the carbamate substituents, which confirmed a change in its conformation from nonpolar to polar solvent. The self-assembling behavior of the tricarbamate in dilute solutions was investigated by TEM. Fiber-like networks were observed in a large range of solution concentrations.     

How to Control the Chemoselectivity of the Catalytic Formation of Chiral γ-Lactams or 2,3-Disubstituted Pyrroles by the Choice of Solvent

Summary. The reaction of the unsaturated imine methyl(3-phenylallylidene)amine with ethylene and carbon monoxide in the presence of catalytical amounts of Ru₃(CO)₁₂ leads to the formation of two heterocyclic products. One of the products is a chiral γ-lactam, the other one a 2,3-disubstituted pyrrole derivative, in which only the carbon atom from carbon monoxide is incorporated. The selectivity in the formation of the products may be controlled by the choice of solvent. In general, in nonpolar solvents the formation of the lactam is preferred whereas the use of more polar solvents enhances the yield of the pyrrole. For most of the solvents used there is a linear dependence of the product ratio on the relative permittivity of the corresponding solvent. Typically, polar aprotic solvents do not follow this rule.     

Two-dimensional surface chirality control by solvent-induced helicity inversion of a helical polyacetylene on graphite

We report the direct evidence for the macromolecular helicity inversion of a helical poly(phenylacetylene) bearing l- or d-alanine pendants with a long alkyl chain in different solvents by atomic force microscopy observations of the diastereomeric helical structures. The diastereomeric helical poly(phenylacetylene)s induced in polar and nonpolar solvents self-assembled into ordered, two-dimensional helix bundles with controlled molecular packing, helical pitch, and handedness on graphite upon exposure of each solvent. The macromolecular helicity deposited on graphite from a polar solvent further inverted to the opposite handedness by exposure to a specific nonpolar solvent, and these changes in the surface chirality based on the inversion of helicity could be visualized by atomic force microscopy with molecular resolution, and the results were quantified by X-ray diffraction of the oriented liquid crystalline, diastereomeric helical polymer films.     

How To Make Nitroaromatic Compounds Glow: Next‐Generation Large X‐Shaped,Centrosymmetric Diketopyrrolopyrroles

Red‐emissive π‐expanded diketopyrrolopyrroles (DPPs) with fluorescence reaching λ=750 nm can be easily synthesized by a three‐step strategy involving the preparation of diketopyrrolopyrrole followed by N‐arylation and subsequent intramolecular palladium‐catalyzed direct arylation. Comprehensive spectroscopic assays combined with first‐principles calculations corroborated that both N‐arylated and fused DPPs reach a locally excited (S₁) state after excitation, followed by internal conversion to states with solvent and structural relaxation, before eventually undergoing intersystem crossing. Only the structurally relaxed state is fluorescent, with lifetimes in the range of several nanoseconds and tens of picoseconds in nonpolar and polar solvents, respectively. The lifetimes correlate with the fluorescence quantum yields, which range from 6 % to 88 % in nonpolar solvents and from 0.4 % and 3.2 % in polar solvents. A very inefficient (T₁) population is responsible for fluorescence quantum yields as high as 88 % for the fully fused DPP in polar solvents.     

磁性功能化酚醛树脂的合成及对金属离子的吸附性能

磁性功能化酚醛树脂的合成及对金属离子的吸附性能;环氧酚醛树脂;螯合;金属离子;溶胀;吸附容量;吸附动力学     

用气相色谱法研究乙酸乙烯酯不对称氢甲酰化反应中溶剂的影响

用毛细管气相色谱、色－质谱和旋光色散及圆二色性谱仪等方法对乙酸乙烯酯在非极性和极性溶剂中的不对称氢甲酰化反应产物进行分离和鉴定。实验结果表明,在非极性溶剂中反应的收率、选择性、光学收率ｅ．ｅ．值（ｅｎａｎｔｉｏｍｅｒｉｃｅｘｃｅｓｓ）均比极性溶剂中的结果为好。由此探讨了不对称氢甲酰化反应中溶剂的影响。     

Influence of solvent on the thermal stability and organization of self-assembling fibrillar networks in methyl-4,6-O-(p-nitrobenzylidene)-α-d-glucopyranoside gels

Sugar based low-molecular-mass organogelator (LMOG) methyl-4,6-O-(p-nitrobenzylidene)-α-d-glucopyranoside, is a unique gelator because its small and weakly-interacting molecules can form large supramolecular structures in nonpolar, but also in polar, solvents and cause their gelation. The self-assembling properties of the gelator were studied in selected nonpolar and polar solvents. It was shown that the driving forces for both types of solvent are the intermolecular hydrogen bond interaction. The effect of the nature of the solvent on the thermal stability of the gels and on the three-dimensional network organization was determined. Different solvent parameters, such as dielectric constant, one-component solubility parameter, the polarity parameter and the Kamlet-Taft parameters were considered to quantify solvent effects on the gelation. Some correlation between these parameters and the gel stability, microstructure and the enthalpy of the phase transition were established. The effort to correlate the Kamlet-Taft parameters to the thermal stability and gelation ability is also possible but applies only to the studied gelator.     

Solvent effect on the self-assembled structure of an amphiphilic perylene diimide derivative

An amphiphilic electron-deficient (n-type) perylene diimide has been synthesized and characterized. The diimide contains a hydrophobic long chain on one end and a hydrophilic ethoxy chain on the other. The self-assembly of this molecule in polar and nonpolar solvents has been demonstrated by concentration- and temperature-dependent absorption and fluorescence spectroscopies. Analysis of the spectral change for the aggregates shows typical J-aggregates for structures precipitated from polar solvents and H-aggregates for structures precipitated from nonpolar solvents. SEM and TEM micrographs and a suggested packing scheme, compatible with the formation of nanostrips in nonpolar solvents and nanofibers in polar solvents, are presented.     

Characterization and prediction of retention in gradient-elution normal phase HPLC with ternary gradients

Summary Chromatographic behaviour of phenylurea herbicides and phenols on a silica gel column with ternary gradient elution using mobile phases containing dry 2-propanol, n-heptane and dioxane was investigated. With dried solvents and the temperature controlled to ±0.1 °C, the data from repeated experiments measured on the same column after ten months of use were reproducible. Algorithms were suggested for characterization and prediction of retention in ternary gradients at a constant ratio of the two polar solvents (elution strength gradients) and at a constant sum of their concentrations (selectivity gradients). These were based on two- and three-parameter equations describing the dependence of the sample retention factors (isocratic) on the concentration of the polar solvent in binary mobile phases. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Green synthesis of fluorescent carbon dots from Kumquat (Fortunella margarita) for detection of Fe3+ ions in aqueous solution

In this study, kumquat was first time used for synthesizing carbon dot structures (CDs) with the hydrothermal method. These newly synthesized CDs was characterized structurally and optically. The ion sensor application of the new CDs was carried out using 20 different metal ions. It was observed that CDs have high selectivity only for Fe³⁺ ions among the metal ions studied. Detection limit for Fe³⁺ ions was calculated as 0.70 µM. The results showed that these new CDs are highly selective against Fe³⁺ ions and have a very short response time such as 0.5 min. The Fe³⁺ ions selectivity of CDs was tested on real (tap water) samples. The results exhibited that this new CDs, obtained with green synthesis from Kumquat fruit without using chemical agents in one-pot simple and economical process, can be used as fluorometric sensor for detection of Fe³⁺ ions with high selectivity and sensitivity, low detection limit and rapid response time.

     

Solvent effect on the photophysical properties of the anticancer agent ellipticine

This paper investigates how solution conditions, especially solvent polarity and hydrogen bonding, affect the fluorescence of ellipticine, a natural plant alkaloid with anticancer activity. A total of 16 solvents that cover a wide range of polarities were tested. The ultraviolet (UV) absorption and fluorescence emission of ellipticine were found to be solvent dependent. The absorption and emission maximum shifted to higher wavelengths (red shift) with increased solvent polarity. The difference in absorption and emission maximum (Stokes' shift) was large, approximately 10,000-11,000 cm-1, in polar solvents (with orientation polarizability Deltaf>0.2) but unusually small, approximately 8900 cm-1, in nonpolar solvents (hexane and cyclohexane). Large Stokes' shifts were due to an intramolecular charge transfer (ICT), which was enabled by large solvent polarity and hydrogen bonding of ellipticine with the solvents. Two transitions were found in the Lippert-Mataga plot between (1) nonpolar and semipolar solvents and between (2) semipolar and polar solvents. The first transition reflected the formation of hydrogen bonds between ellipticine and the solvents whereas the second transition indicated that ellipticine underwent an ICT. In addition, the larger extinction coefficients and the longer lifetime of ellipticine obtained in protic solvents were attributed to the formation of stronger hydrogen bonds. The photophysical response of ellipticine to changes in solvent polarity and hydrogen bond formation could be used to infer the location of ellipticine in a heterogeneous medium, namely liposomes in aqueous solution. A relatively large red shift of emission in liposomes indicated that ellipticine may be in a more polar environment with respect to the lipid bilayer, possibly close to the hydrophilic interface.     

Effects of Nonpolar and Polar Solvents on the Qx and QY Energies of Bacteriochlorophyll a and Bacteriopheophytin a

The effects of nonpolar and polar solvents on the Q_x and Q_y energies of bacteriochlorophyll (BChl) a and bacteriopheophytin (BPhe) a were examined by electronic absorption spectroscopy. All of the four different energies exhibited a linear dependence on R(n) = (n² - l)/(n²+ 2), where n is the refractive index of the solvent, in both nonpolar and polar solvents. The energy of each state of both pigments could be expressed as v = -dR(n) + e (in cm^-1) where coefficient d was related to the dispersive interaction between the solute and the solvent molecules. A theory developed by Nagae showed that coefficient d originates from the quantum-mechanical fluctuation of the multipole moments of the solute, in terms of which the following characteristics of the observed d values were explained: (1) In all of the four cases of the Q_x, and Q_y energies of both BChl a and BPhe a, the d values for the polar solvents were smaller than those for the non-polar solvents. (2) In both nonpolar and polar solvents, the d value of BChl a was larger than that of BPhe a in the Q_y energy, whereas the d value of BPhe a was larger than that of BChl a in the Q_x energy. (3) The d value of the Q_x energy was larger than that of the Q_y, energy for either case of BChl a or BPhe a.