Colorimetric response of spiropyran derivative for anions in aqueous or organic media

We previously found that a simple spiropyran derivative (1:1′,3′,3′-trimethyl-6-nitro-spiro-[2H-1-benzopyran-2,2′-indoline]) behaves as a selective and sensitive cyanide anion (CN⁻) receptor in aqueous media under UV irradiation¹³. The receptor, when irradiated by UV light in a water/MeCN mixture, creates a CN⁻-selective absorption band via a nucleophilic addition of CN⁻ to 1 (formation of the 1-CN⁻ species) and allows quantitative determination of very low levels of CN⁻. In the present work, effects of pH and water content on the response of 1 to anions were studied to clarify the detailed properties of 1. In aqueous media, 1 reacts selectively with CN⁻regardless of pH and water content, but the reaction is suppressed by a decrease in pH and an increase in water content due to the protonation of CN⁻. In contrast, in pure MeCN, addition of F⁻ also creates a new absorption band, as does CN⁻. This is promoted via a nucleophilic interaction between 1 and F⁻ in a 1:2 stoichiometry (formation of the 1-2F⁻ species). The 1-CN⁻ and 1-2F⁻ species have different photochemical properties; the 1-CN⁻ species is stable upon UV irradiation, while the UV irradiation of the 1-2F⁻ species leads to a decomposition of the spiropyran platform.     

Colorimetric and fluorometric dual-modal probes for cyanide detection based on the doubly activated Michael acceptor and their bioimaging applications

In this study, we synthesized CTB and CB probes based on doubly activated Michael acceptors to selectively detect cyanide (CN⁻) anions through a one-step condensation reaction of coumarinyl acrylaldehyde with the corresponding derivatives of malonyl urea (thiourea). Through the conjugated addition of CN⁻ to the β-site of the Michael acceptor, both probes displayed colorimetric and fluorometric dual-modal responses that were highly reactive and selective. CTB generates an active fluorescent response, whereas CB displays a ratiometric fluorescent response. The fluorescent signal of the probes reached its maximum given only 1 CN⁻ equivalent and the signal change was linearly proportional to CN⁻ concentrations ranging from 0 to 5 μM with the detection limits 18 and 23 nM, respectively. The reaction rate of the probes is highly dependent on the methylene acidity of malonyl urea derivatives. Thus, the response rate of CTB to CN⁻ is 1.2-fold faster than that of CB, and the response rate of CB to CN⁻ is 1.2-fold faster than that of the previously examined CM. We then verified the highly reactive nature of the β-site of the probes through density functional reactivity theory calculations. In addition, according to proof-of-concept experiments, these probes may be applied to analyze CN⁻ contaminated water and biomimetic samples. Finally, cell cytotoxicity and bioimaging studies revealed that the probes were cell-permeable and could be used to detect CN⁻ with low cytotoxicity.     

Fluoride-induced intermolecular excimer formation of bispyrenyl thioureas linked by polyethylene glycol chains

New bispyrenyl thioureas linked by polyethylene glycol (PEG) chains, L1-L3, and methoxy benzene pyrene thiourea, L4, were synthesized. Upon binding with F⁻ in CHCl₃, L1-L3 exhibited strong excimer emission bands (I_E) and weak monomer emission bands (I_M), while L4 displayed the same intensity of both bands. However, little or no change was observed in fluorescence spectra of L1 upon adding OH⁻, AcO⁻, BzO⁻, H₂PO₄⁻, Cl⁻, Br⁻, and I⁻. Therefore, only F⁻ induced the pyrene excimer formation. Job’s plots showed 1/1 or 2/2 complexation of L1 with F⁻. Ratios of I_E/I_M of L1·F⁻ complex were dependent on the concentration of L1, implying that the dimerization of L1 proceeded via the intermolecular excimer formation. Among L1-L4, L1 possessed the highest binding constant and sensitivity toward F⁻ implying the importance of the linking PEG chain. L1 was demonstrated to be an excellent probe for F⁻ in CHCl₃ with the detection limit as low as 46.2 μg/L.     

Anion recognition through hydrogen bonding by adamantane-dipyrromethane receptors

Adamantane-dipyrromethane (AdD) receptors [di(pyrrole-2-yl)methyladamantane (1), 2,2-di(pyrrole-2-yl)adamantane (2), 1,3-bis[di(pyrrole-2-yl)methyl]adamantane (3), 2,2,6,6-tetra(pyrrole-2-yl)adamantane (4)] form complexes with F⁻, Cl⁻, Br⁻, AcO⁻, NO₃⁻, HSO₄⁻, and H₂PO₄⁻. The association constants of the complexes were determined by ¹H NMR titrations, whereas the geometries of complexes 1·F⁻ (2:1), 2·F⁻ (2:1), 2·Cl⁻ (2:1), 2·AcO⁻ (2:1), and 4·F⁻ (1:1) were determined by X-ray structural analysis. The most stable complexes are of 2:1 stoichiometry with F⁻ and AcO⁻. The stability constants are in accordance with the anion basicity and the ability of AdD receptors to place the hydrogen bonding donor groups in a tetrahedral fashion around anions. The binding energies of the complexes between receptors 1-4 and F⁻ anion are calculated using quantum chemical methods. The calculated results show that the solvent polarity is important for the complexation of fluoride ion with AdD receptors 1-4.     

Synthesis, optical and electrochemical properties of new receptors and sensors containing anthraquinone and benzimidazole units

Novel anion receptors and sensors, HBIMANQ and BIMANQ fabricated from the imidazolole unit and anthraquinone moieties were synthesized. ¹H NMR spectroscopy and UV-vis titrations in DMSO-d₆ and DMSO, respectively, showed that both receptors underwent deprotonation at the NH- moiety of the amide-anthraquinone unit in the presence of basic anions such as F⁻ and AcO⁻. These phenomena gave a dramatic color change due to charge transfer transition corresponding to the shift of λ_max from 371 nm to 489 nm. Redox chemistry of HBIMANQ and BIMANQ in the presence of anions (F⁻, Cl⁻, AcO⁻, BzO⁻, and H₂PO₄⁻) using cyclic voltammetry showed the different CV responses upon addition of various anions. In the case of HBIMANQ with various anions, the CV changes are dependent on the basic strength of anions in order of F⁻>AcO⁻, BzO⁻>H₂PO₄⁻>Cl⁻, Br⁻. Interestingly, the CV responses of BIMANQ with H₂PO₄⁻ exhibited the most significant changes. BIMANQ, thus, has an excellent electrochemical selectivity toward H₂PO₄⁻.     

Naked eye sensing of anions using thiourea based chemosensors with real time application

Novel chromogenic sensors with thiourea moiety as receptor unit were synthesized and characterized using IR and NMR spectroscopic techniques. The receptors 1 and 2 bearing hydrogen bonding site demonstrate visually striking color change, UV–vis, and fluorescence responses for F⁻, AcO⁻, and OH⁻ over other anions such as Cl⁻, Br⁻, H₂PO₄⁻ and HSO₄⁻. Both the receptors 1 and 2 demonstrate detection limit at micro molar level. Further insight to the nature of interaction between receptors and anions was studied using ¹H NMR titration experiment. In particular, the fluoride of tooth paste and mouthwash in water phase can be detected by receptor 2.     

Ferrocene-based imidazolium receptors for anions

Cyclic and acyclic ferrocene derivatives bearing two imidazolium rings have been synthesized and characterized by NMR, elemental analysis, mass spectra, and X-ray crystallography. Electrochemical measurements revealed that all the receptors displayed a significant anodic shift response for F⁻. In addition, for receptors 1, 2, and 4, addition of HSO₄⁻ induced quite different electrochemical behavior with dramatic cathodic peak current increase on CV. ¹H NMR titrations demonstrated that receptors 1, 2, and 4 showed selectivity for AcO⁻ while receptor 3 exhibited high affinity toward Cl⁻ among the anions investigated.     

A ratiometric fluorescent chemosensor, 1,10-phenanthroline-4,7-dione, for anions in aqueous-organic media

A new fluorescent chemosensor, 1,10-phenanthroline-4,7-dione (1), which is capable of the ratiometric sensing of anions in aqueous MeCN, was developed. Chemosensor 1 recognized an anion via two NH groups in the molecule, and showed a much higher affinity for F⁻ than that of 4-quinolone, which binds to an anion at one NH group of the molecule. Upon binding to F⁻, the intensity of the emission band ascribed to the complex of 1-F⁻ was drastically enhanced, while the emission intensity of unbound 1 gradually decreased. The changes in these two emission bands enabled the successful ratiometric sensing.     

Novel highly selective anion chemosensors based on 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole

2-(2-Hydroxyphenyl)-5-phenyl-1,3,4-oxadiazole 1 and 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole 2 were used as anion fluorescent and colorimetric chemosensors with high selectivity for H₂PO₄⁻ and F⁻ over Cl⁻, while 2 can even distinguish H₂PO₄⁻ from F⁻.     

Novel receptors with quinoline and amide moieties for the biologically important ions

New chromogenic anion receptors 2 and 4 utilizing quinoline and nitrophenyl groups as signaling groups were synthesized. In these receptors, amide and amine groups made strong multiple hydrogen interactions with anions. The receptors 2 and 4 bind anions with a selectivity of F⁻ > CN⁻ >  and proved to be an efficient naked-eye detector for the fluoride and cyanide ion.     

Anion recognition by 2,2′-binaphthalene derivatives bearing urea and thiourea groups at 8- and 8′-positions by UV-vis and fluorescence spectroscopies

Synthesis and anion recognition properties of 2,2′-binaphthalene derivatives bearing two thiourea (1) and urea (2) groups at 8- and 8′-positions were studied. The structure of receptor 1 was determined by X-ray crystallography. UV-vis spectra of the receptors showed characteristic changes around 300-400 nm through isosbestic points upon the addition of biologically relevant anions such as acetate, dihydrogenphosphate, and chloride in MeCN and DMSO due to restriction of the rotation around the single bond connecting two naphthyl moieties by cooperative guest binding of two recognition sites. Job’s plots showed 1:1 complexation for guest anions. The fluorescence quantum yields of free form of 1 and 2 in MeCN were determined to be 0.021 and 0.57, respectively. The fluorescence intensities of the receptors diminished upon the addition of anions in MeCN. The association constants of receptors 1 and 2 were one or two orders of magnitude greater than the corresponding monothiourea and urea receptors 3 and 4 indicating cooperative hydrogen bonding with guest anions. The selectivity trends of association of anions were F⁻>AcO⁻>H₂PO₄⁻>Cl⁻>>HSO₄⁻≈NO₃⁻≈Br⁻≈I⁻ for 1, and F⁻>AcO⁻≈Cl⁻>H₂PO₄⁻>Br⁻>HSO₄⁻>I⁻≈NO₃⁻ for 2. Receptor 2 showed remarkable Cl⁻ selectivity presumably owing to suitable orientation for effective hydrogen bond formation with Cl⁻.     

Simple naphthalimide based anion sensors: deprotonation induced colour changes and CO2 fixation

The 4-amino-1,8-naphthalimide based chemosensors 2, 4 and 6 show striking green-to-purple colour changes due to the deprotonation of the 4-amino moiety on interaction with strongly basic anions such as F⁻: these colour changes reverse gradually with time due to the fixation of atmospheric CO₂ (as HCO₃⁻) yielding 1:1 adducts as demonstrated by X-ray crystallography.     

Calix[4]arenes containing urea and crown/urea moieties: effects of the crown ether unit and Na towards anion binding ability

Calix[4]arenes containing urea and crown/urea moieties, 7 and 10, respectively have been synthesized. ¹H NMR titrations of 7 and 10 with anions in DMSO-d₆ showed that 7 and 10 formed complexes with Cl⁻, Br⁻, NO₃⁻ and H₂PO₄⁻ to a different extent. The association constants of 7 and 10 towards anions were calculated and found to vary as H₂PO₄⁻>Cl⁻>Br⁻>NO₃⁻. However, compared to 7 the presence of the crown unit in 10 resulted in a slightly higher affinity to Cl⁻ and Br⁻, but a lower affinity to H₂PO₄⁻. Upon addition of Na⁺, the binding ability of 10 towards H₂PO₄⁻ is increased due to ion-pair enhancement.     

New interlocked molecules generated from a podand containing urea units and imidazolium salts using an anion template

A podand containing urea units (L) was found to form interlocked structures with 2,5-dihexylamide imidazolium salts (3·X), 2,5-dihexyl imidazolium salts (4·X), and 2,5-dihexyl benzoimidazolium salts (5·X), where X=Cl⁻, Br⁻, and PF₆⁻ using anions as templates. The binding ability of L and guest molecules was evaluated by ¹H NMR titrations in CDCl₃. It was found that L could form complexes with guest molecules in the following order, 3·X > 5·X > 4·X. Stabilities of the complexes also depended on shape of the templated anions: Cl⁻>Br⁻?PF₆⁻. Hydrogen bonding and π-π stacking interactions played an important role in the self-assembling of these interlocked molecules.     

Dual responsive chemosensors for anions: the combination of fluorescent PET (Photoinduced Electron Transfer) and colorimetric chemosensors in a single molecule

The design and synthesis of two novel fluorescent PET anion sensors is described, based on the principle of ‘fluorophore-spacer-(anion)receptor’. The sensors 1 and 2 employ simple diaromatic thioureas as anion receptors, and the fluorophore is a naphthalimide moiety that absorbs in the visible part of the spectrum and emits in the green. Upon recognition of anions such as F⁻ and AcO⁻ in DMSO, the fluorescence emission of 1 and 2 was ‘switched off’, with no significant changes in the UV-vis spectra. This recognition shows a 1:1 binding between the receptor and the anions. In the case of F⁻, further additions of the anion, gave rise to large changes in the UV-vis spectra, where the λ_max at 455 nm was shifted to 550 nm. These changes are thought to be due to the deprotonation of the 4-amino moiety of the naphthalimide fluorophore. This was in fact found to be the case, using simple naphthalimide derivatives such as 6. Sensors 1 and 2 can thus display dual sensing action; where at low concentrations, the fluorescence emission is quenched, and at higher concentrations the absorption spectra are modulated.     

Synthesis, structural characterization and electrochemistry of C,N-chelated organotin(IV) dicarboxylates with ferrocenyl substituents

A set of C,N-chelated organotin(IV) ferrocenecarboxylates, [L^CN(n-Bu)Sn(O₂CFc)₂] (1), [(L^CN)₂Sn(O₂CFc)₂] (2), [L^CN(n-Bu)Sn(O₂CCH₂Fc)₂] (3), [L^CN(n-Bu)Sn(O₂CCH₂CH₂Fc)₂] (4), [L^CN(n-Bu)Sn(O₂CCHCHFc)₂] (5), [L^CN(n-Bu)Sn(O₂CfcPPh₂)₂] (6), [(L^CN)₂Sn(O₂CfcPPh₂)₂] (7), and [L^CN(n-Bu)₂Sn(O₂CFc)] (8) (L^CN = 2-(N,N-dimethylaminomethyl)phenyl, Fc = ferrocenyl and fc = ferrocene-1,1′-diyl) has been synthesized by metathesis of the respective organotin(IV) halides and carboxylate potassium salts and characterized by multinuclear NMR and IR spectroscopy. The spectral data indicated that the tin atoms in diorganotin(IV) dicarboxylates bearing one C,N-chelating ligand (1 and 3-6) are seven-coordinated with a distorted pentagonal bipyramidal environment around the tin constituted by the n-butyl group, the chelating L^CN ligand and bidentate carboxylate. Compounds 2 and 7 possessing two chelating L^CN ligands comprise octahedrally coordinated tin atoms and monodentate carboxylate donors, whereas compound 8 assumes a distorted trigonal bipyramidal geometry around tin with the carboxylate binding in unidentate fashion. The solid state structures determined for 1⋅C₆D₆ and 2 by single-crystal X-ray diffraction analysis are in agreement with spectroscopic data. Compounds 1, 3-5, and 8 were further studied by electrochemical methods. Whereas the oxidations of ferrocene units in bis(carboxylate) 2 and monocarboxylate 8 proceed in single steps, compound 1 undergoes two closely spaced one-electron redox waves due to two independently oxidized ferrocenyl groups. The spaced analogues of 2, compounds 3-5, again display only single waves corresponding to two-electron exchanged.     

Cation-anion interactions involving hydrogen bonds: Syntheses and crystal structures study of hexafluorotitanate(IV) salts with pyridine and methyl substituted pyridines

Fluorotitanates (LH)₂[TiF₆]·nH₂O (1: R = pyridine, n = 1, 2: R = 2-picoline, n = 2, 3: R = 2,6-lutidine, n = 0, 4: R = 2,4,6-collidine, n = 0) and (LH)[TiF₅(H₂O)] (3a: L = 2,6-lutidine) have been synthesized by the reaction of pyridine or corresponding methyl substituted pyridines and titanium dioxide dissolved in hydrofluoric acid. The crystal structures of ionic compounds 1, 2, 3, 3a and 4 have been determined by single-crystal X-ray diffraction analysis. The hydrogen bonding led to the formation of discrete (LH)₂[TiF₆] units (4), chains (1-3), and layers (3a). The additional π-π interactions present in 1, 2, and 4 results in chain structures of 1 and 4 and in a layer structure of 2. The [TiF₆]²⁻ and [TiF₅(H₂O)]⁻ anions were observed by ¹⁹F NMR spectroscopy in aqueous solutions of 1, 2, 3, 3a and 4.     

A new fluorescent chemosensor for F based on inhibition of excited-state intramolecular proton transfer

New fluorescent chemosensor 1 with two amidoanthraquinone groups (1-AAQs) at the lower rim of p-tert-butylcalix[4]arene has been synthesized. The significant changes of absorption and fluorescence bands show that chemosensor 1 is selective toward fluoride ion (F⁻) over other anions such as Cl⁻, Br⁻, I⁻, CH₃COO⁻, , , and OH⁻. The ESIPT process of 1 is inhibited by the fluoride-induced H-bonding followed by deprotonation of NH of the 1-AAQ.     

Ferrocenyl D-π-A conjugated polyenes with 3-dicyanomethylidene-1-indanone and 1,3-bis(dicyanomethylidene)indane acceptor groups: Synthesis, linear and second-order nonlinear optical properties and electrochemistry

Second-order nonlinear optical chromophores incorporating the ferrocenyl group as an electron donor and 3-dicyanomethylidene-1-indanone and 1,3-bis(dicyanomethylidene)indane acceptor groups, connected by a conjugated polyenic bridge of varied length (2[n] and 3[n], respectively) have been synthesized. The electronic absorption spectra of these compounds display in the visible region bands attributable to π-π* and metal-to ligand charge transfer (MLCT) transitions. The energies of these transitions are close to those reported earlier for ferrocenyl D-π-A chromophores with the strongest acceptor groups, e.g., with the 3-dicyanomethylidene-2,3-dihydrobenzothiophene-1,1-dioxide group (1[n]) [V. Alain, M. Blanchard-Desce, C.-T. Chen, S.R. Marder, A. Fort, M. Barzoukas, Synt. Met. 81 (1996) 133]. The solid-state structure of 2[3], determined by X-ray diffraction shows a significant reduction of the bond length alternation (BLA), 0.05 Å, suggesting high first hyperpolarizability. However, a centrosymmetrical packing of molecules of this compound in the crystal excludes its second harmonic generation ability. The μβ values of 2[n] and 3[n], determined by the EFISH technique at 1907 nm are high and increase with the increasing length of the conjugated π-bridge. The highest value of μβ (8720 × 10⁻⁴⁸ esu) was determined for 3[4], which is close to that reported for 1[4] (11 200 × 10⁻⁴⁸ esu), the highest value found for a ferrocenyl D-π-A chromophore until now.     

Organotin compounds: an ionophore system for fluoride ion recognition

Ion-selective properties were established for membrane electrodes prepared by using organotin compounds of type (L^CNRSnF₂)_n, (R = n-Bu (I), = Ph (II)) and (L^CNSnF₃)_n (III) (L^CN = C₆H₄(CH₂NMe₂)-2). Electrodes formulated with the optimized membranes containing the organotin compounds I-III as ionophores and sodium tetraphenylborate (10-30%) exhibited high selectivity for fluoride over other anions. An electrode prepared with ionophore II using dibutyl phthalate as the plasticizer and 15% sodium tetraphenylborate (NaTPB) as anion additive, possesses the best potentiometric response characteristics. It shows a detection limit of 7.9 × 10⁻⁷ M with a slope of 62.7 mV decade⁻¹ of activity in buffer solutions of pH 5.5. The interference from other anions is suppressed under this optimized measurement conditions. An entirely non-Hofmeister selectivity sequence (F⁻ > CH₃COO⁻ > Cl⁻ > I⁻ ∼ Br⁻ >ClO₄⁻ > NO₂⁻ > NO₃⁻ > SCN⁻) with remarkable preference towards fluoride is obtained. The influence on the electrode performances by anion additive was studied, and the possible response mechanism was investigated by UV-vis spectra. The electrode has been used for direct determination of fluoride in drinking mineral water with satisfactory results.