Porous multicomponent chitosan/poly(ε-caprolactone)-block poly (ethylene glycol)/SiO2 aerogel@polydopamine membrane for Congo red adsorption

A composite adsorbent, chitosan//poly (ε-caprolactone)-block poly (ethylene glycol)/SiO₂ aerogel@polydopamine (CS/PCL-b-PEG/SA@PDA) membrane was prepared for the adsorption of organic dyes. The matrix polymer materials of this novel adsorbent were eco-friendly. SiO₂ aerogel with nanoporous network construction was fixed in the multicomponent polymer fibers through simultaneous electrospinning-electrospray technology followed by modification of polydopamine (PDA). The composite adsorbent had a maximum adsorption capacity of 598.8 mg/g for Congo red (CR) and possessed good reusability performance. This adsorbent showed excellent performance for the selective adsorption of relatively large molecule CR dyes even under high concentration of small molecule methyl orange (MO) dyes or 1 M of salt solution. The adsorption mechanism indicated that the –NH₂ and –OH groups in adsorbent could generate the stronger electrostatic attraction with the –SO₃^- groups in CR. Meanwhile, the sufficient adsorption spaces of the adsorbent were constructed by the porous network structure of SiO₂ aerogel, the accumulation of PDA particles and the porous structure of the multicomponent composite membrane. The work provided a proactive study in designing an adsorbent for the selective adsorption of organic dyes.     

Elucidating dominant factors of PO43–, Cd2+ and nitrobenzene removal by biochar: A comparative investigation based on distinguishable biochars

Biochars produced from crab shell (CSB), oak sawdust (OB), Jerusalem artichoke tuber (JAB) and sorghum grain (SB) displayed distinguishable adsorption-related characteristics, such as specific surface area (SSA), ash content and acidic oxygen-containing functional groups (AFGs), which linked to the biochar adsorption mechanisms of most pollutants. Herein, PO₄^3–, Cd²⁺, and nitrobenzene (NB) were employed for adsorption by these biochars to elucidate the dominant factors for the adsorption. Adsorption performance of the three pollutants onto these four biochars varied considerably, as exemplified by the excellent adsorption of PO₄^3– and Cd²⁺ onto CSB (225.3 and 116.0 mg/g, respectively) as compared with onto the other three biochars (4.2–37.1 mg/g for PO₄^3– and 9.7–41.0 mg/g for Cd²⁺). OB displayed the best adsorption of NB (72.0 mg/g), followed by SB (39.5 mg/g), JAB (31.1 mg/g), and CSB (23.6 mg/g). The kinetics and isotherm adsorption assessments couple with material characterization suggested that the sorption of selected pollutants on biochars was attributed to the multiple mechanisms involved, including coprecipitation, chemical bonds, cation exchange, physical absorption, and complexation. Further path analysis suggested that AFGs and ash content in biochars were more important than SSA with regards to pollutant removal, especially, with ash playing a crucial role in the removal of Cd²⁺ and PO₄^3–, and AFGs being mainly responsible for NB adsorption. These findings might offer guidance on the preparation or modification of biochar with a targeted function for pollutant removal through an understanding the dominant factors.     

Preparation of carbon-aerogel polypyrrole composite for desalination by hybrid capacitive desalination method

Capacitive Deionization (CDI) is an emerging technology with great potential applications. Most researchers view it as a viable water treatment alternative to reverse osmosis. This research reports the preparation and application of a carbon aerogel polypyrrole (CA-PPy) composite for the desalination of NaCl solution by the hybrid CDI method. The carbon aerogel (CA) was prepared from a Resorcinol / Formaldehyde precursor by the sol–gel method. The aerogel obtained from the sol–gel was then pyrolysed in a tube furnace to form CA. Polypyrrole (PPy) was prepared by the Oxidative chemical polymerisation of pyrrole, ferric chloride hexahydrate (oxidant), and sodium dodecyl sulfate (dopant). A composite of CA and PPy was then prepared and used to modify carbon electrodes. The CA-PPy composite was characterised to verify its composition, morphology, thermal properties, and functional groups. The electrochemical properties of the material were determined by Cyclic voltammetry (CV) and Electrochemical impedance spectroscopy (EIS) tests. The electrochemical tests were done using a GAMRY potentiostat electrochemical workstation, a 1.0 M KCl was used as the electrolyte, and the applied potential window was (-0.2 to + 0.6) V for the CV test. The EIS test was done with the same concentration of KCl electrolyte at an applied potential of 0.22 V and at a frequency range of (0.1 – 100, 000) Hz. The optimal specific capacitance of the CA is 115F/g, and that of the composite is 360.1F/g, they were both obtained at a scan rate of 5 mV/s. The CDI desalination study of the CA-PPy composite showed a salt adsorption capacity (SAC) of 10.10 mg/g (300 mg/L NaCl solution) – 15.7 mg/g (800 mg/L NaCl solution) at 1.2 V applied voltage. The salt recovery efficiency of the electrode material in the 300 mg/L solution is 27 %, in the 500 mg/L solution, it is 20.12 %, and in the 800 mg/L solution, it is 15.41 %. The electrode material also showed good electrochemical stability after nine cycles of ion adsorption/desorption study.     

Post Synthetic Modification of NH2-(Zr-MOF) via Rapid Microwave-promoted Synthesis for Effective Adsorption of Pb(II) and Cd(II)

Excessive heavy metals in the water constitute a health hazard to humans, yet it may be efficiently purified using adsorbents. Herein, for the first time, UiO-66-NH₂ was modified by Glycidyl methacrylate (GMA) via microwave heating method to investigate its potential for adsorption of Pb(II) and Cd(II) metal ions. Synthesized MOF was characterized by TGA, XRD, BET, FE-SEM-EDX, and FTIR. The MOF has a huge surface area of 1144 m²/g, a mean pore diameter of 2.84 nm, and a total pore volume of 0.37 cm³/g. The effect of UiO-66-GMA performance was evaluated by investigating the impact of pH (1–9), contact time (0–200 min), initial metal ions concentration (20–1000 mg/L), temperature (25–55 °C), adsorbent dosage (0.5–3 g/L), and co existences of other metals was investigated on Pb(II) and Cd(II) percentage removal. Following an analysis of the adsorption isotherms, kinetics, and thermodynamics, the Temkin isothermal model showed an excellent fit with the adsorption data (R² = 0.99). The adsorption process was a spontaneous endothermic reaction and kinetically followed the pseudo-second-order kinetics model. Microwave heating method produced highly crystalline small Zr-MOF nanoparticles with a short reaction time. It promoted the simple yet highly efficient synthesis of Zr-based MOFs, as shown by the reaction mass space-time yield. The adsorption capability of Pb to the presence of several polar functional groups, including as primary and secondary amines, ester, alkene, and hydroxyl groups. This adsorbent is a potential candidate for wastewater treatment due to its outstanding structural stability in acidic and basic solutions, high removal efficiency, and recyclability.     

Ice-templated porous polymer/UiO-66 monolith for Congo Red adsorptive removal

Chitosan/MOF composite porous monolith used in water remediation as adsorbent can realize high-efficient removal of pollutant in water and facile recycling from water. However, dissolution of chitosan (without crosslinking) in acidic aqueous solution will cause breakage of composite monolith. Herein, we report a chitosan/UiO-66 monolith prepared by ice-templating method. Specially, a pre-crosslinking treatment (by glutaraldehyde) is employed before the monolith formation, which obviously boosts its stability in aqueous solution. The composite monolith is evaluated by SEM, N₂ adsorption, XRD, and batch adsorption tests for Congo Red (CR). The results show that the composite monolith possesses a typical ice-templating structure with hierarchical (mirco- / meso- and macro-) pores. UiO-66 particles are embedded on the surface of chitosan matrix, and the crystal structure of UiO-66 is not changed obviously by the crosslinking and freezing process. The composite monolith exhibits high adsorption efficiency (90% of CR was removed from its aqueous solution in 60 min) and the maximum adsorption capacity of 246.21 mg/g (derived from Langmuir model) can be reached. After adsorption, the monolith is collected by a facile procedure and recovered using ethanol for evaluating its reusability. After 4 cycles, the CR removal efficiency of the composite monolith still remains ~90% of the initial efficiency. This work demonstrates that the simple crosslinking procedure before monolith formation can ensure the intact shape of the chitosan/MOF monolith during adsorption.     

Removal of permethrin pesticide from water by chitosan–zinc oxide nanoparticles composite as an adsorbent

Synthesis of chitosan–ZnO nanoparticles (CS–ZnONPs) composite beads was performed by a polymer-based method. The resulting bionanocomposite was characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD) spectroscopy and infrared spectroscopy (FT-IR). Adsorption applications for removal of pesticide pollutants were conducted. The optimum conditions, including adsorbent dose, agitating time, initial concentration of pesticide and pH on the adsorption of pesticide by chitosan loaded with zinc oxide nanoparticles beads were investigated. Results showed that 0.5 g of the bionanocomposite, in room temperature and pH 7, could remove 99% of the pesticide from permethrin solution (25 ml, 0.1 mg L⁻¹), using UV spectrophotometer at 272 nm. Then, the application of the adsorbent for pesticide removal was studied in the on-line column. The column was regenerated with NaOH solution (0.1 M) completely, and then reused for adsorption application. The CS–ZnONPs composite beads appear to be the new promising material in water treatment application with 56% regeneration after 3 cycles.     

Optimized adsorption and effective disposal of Congo red dye from wastewater: Hydrothermal fabrication of MgAl-LDH nanohydrotalcite-like materials

The effectiveness of Congo red (CR) adsorption from aqueous solutions onto MgAl-layered double hydroxide (MgAl-LDH) nanosorbents was examined in this study. MgAl-LDH was synthesized using the hydrothermal method, and physicochemical characterization was performed via powdered X-ray diffraction, high-resolution transmission electron microscopy, Fourier transform infrared analysis, and zeta potential measurements. For optimum adsorption of CR onto the synthesized MgAl-LDH nanosorbent, the adsorption process was employed in batch experiments. Adsorption parameters, such as the adsorbent dosage, solution pH, contact time, and initial adsorbate concentration, vary with the adsorption kinetics and isotherm mechanism. The results of the batch experiments indicated rapid adsorption of CR dye from aqueous solutions onto MgAl-LDH during the first 30 min until equilibrium was achieved at 180 min with a dye concentration of 50 mg/100 mL and MgAl-LDH adsorbent dosage of 0.05 g. The experimental adsorption data fit adequately with the monolayer coverage under the Langmuir isotherm model (R² = 0.9792), and showed the best fit with the pseudo-second-order kinetic model (R² = 0.996). The change in zeta potential confirmed the effective adsorption interaction between the positively charged MgAl-LDH and the negatively charged CR molecules with electrostatic interactions. This work is distinguished by the successful hydrothermal preparation of MgAl-LDH in the form of homogenous nanoscale particles (～100 nm). The prepared MgAl-LDH showed a high adsorption capacity toward anionic CR dye with a maximum adsorption capacity of 769.23 mg/g. This capacity is higher than those reported for other adsorbents in previous research.     

Study on adsorption performance of manganese titanium oxide composite biochar for removal of Rhodamine B

A novel manganese titanium oxide/biological carbon (Mn/Ti/BC) composite was synthesized and prepared by hydrothermal synthesis to further improve the adsorption performance of Rhodamine B. The microstructure of the composite was analyzed by characterization means such as scanning electron microscopy(SEM),FT-IR spectroscopy and X-ray diffraction. The adsorption experiments were carried out by varying the parameters such as adsorption time, adsorbent dosage, initial concentration of the solution, and temperature. The adsorbed samples were analyzed by UV spectrophotometer. The obtained data were tested for the Langmuir and Freundlich isotherm models at equilibrium. The R₂ (correlation coefficient) values indicated that the data were in good agreement with the Langmuir adsorption model. The experimental results showed that the removal rate of Rhodamine B reached 98% when the solution concentration of Rhodamine B was 100 mg/L, and the addition of manganese titanium oxide-biomass carbon composite was 0.5 g, and the dosage ratio was 1:1:1 (Mn–Ti–C). The adsorption process was chemisorption in accordance with the secondary kinetic equation. With low cost, fast adsorption, and good stability,the Mn–Ti–C composite is an excellent adsorption material with good application prospects.     

Facile synthesis of a novel nanocomposite for determination of mercury and copper ions in food and water samples

This paper describes the modification of sodium aluminum silicate hydrate by 3-bromo-5-chlorosalicylaldehyde to form a new composite. Furthermore, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Transmission electron microscopy (TEM), CHN elemental analysis, Nitrogen gas sorption analyzer, and Scanning electron microscopy (SEM) tools were used for characterizing the synthesized composite. The XRD pattern of the synthesized composite shows a halo at 2Θ = 25°, confirming the destruction of the crystalline structure of the nanomaterial owing to the association with an organic substance. The synthesized composite was utilized for the removal and preconcentration of mercury and copper ions from water and food samples. The maximum adsorption capacity of the synthesized composite towards mercury and copper ions is 107.53 and 130.89 mg/g, respectively. In addition, the relative standard deviation was less than 3 %, showing excellent reproducibility. The dynamic analytical ranges are 0.8–380 μg/L and 1.00–550 μg/L for copper and mercury ions, respectively. The preconcentration factor is 10.     

Chitosan as a biosorbent for adsorption of iron (II) from fracking wastewater

In this work, porous chitosan (CS) was investigated as a biosorbent for the removal of iron (II) from the synthetic fracking wastewater. The underlying problem with the production water from fracking industries is that it contains iron (II) up to 55 mg/L, which needs to be eliminated. Porous CS had a specific surface area of 1.05 m²/g with the average pore diameter of 319 A, as determined by using Brunauer‐Emmett‐Teller surface area analysis. The kinetics, isotherms, and thermodynamic analysis confirm that the porous CS can be a potential candidate for iron (II) removal. Both the pseudo‐first‐order model and pseudo‐second‐order model have good fit on iron (II) adsorption with the porous CS. Kinetic studies revealed that the CS‐iron (II) adsorption system was controlled by intraparticle diffusion. The monolayer adsorption capacity of the porous CS from Langmuir model was found to be 51.81 mg/g. The experimental data were fitted against common adsorption isotherms and yielded excellent fits in the following order: Langmuir > Temkin > Freundlich > Dubinin‐Radushkevich isotherms. Thermodynamic studies revealed that the adsorption of iron (II) onto porous CS was feasible and spontaneous. The adsorption process is endothermic, and the entropy is the driving force.     

Rapid removal of anionic organic dye from contaminated water using a poly(3-aminobenzoic acid/graphene oxide/cobalt ferrite) nanocomposite low-cost adsorbent via adsorption techniques

This research study aims to remove hazardous anionic azo dyes (Congo red (CR)) from aqueous solutions via a simple adsorption method using a poly(3-aminobenzoic acid/graphene oxide/cobalt ferrite) nanocomposite (P3ABA/GO/CoFe₂O₄) as a novel and low-cost nanoadsorbent, as synthesized by a simple and straightforward polymerization method. Typically, 3-aminobenzoic acid (3ABA), as monomer, was chemically polymerized with graphene oxide (GO) and cobalt ferrite (CoFe₂O₄) in an aqueous acidic medium containing an ammonium persulfate initiator. The adsorbent P3ABA/GO/CoFe₂O₄ nanocomposite was characterized using various techniques such as Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, transmission electron microscopy, scanning electron microscopy, energy-dispersive analysis by X-ray and Brunauer–Emmett–Teller, vibrating sample magnetometer, and zeta potential techniques. These techniques confirmed the interaction between the poly(3-aminobenzoic acid) with GO and CoFe₂O₄ due to the presence of π-π interactions, hydrogen bonding, and electrostatic forces. Herein, the removal efficiency of dye from aqueous solution by the adsorbent was studied according to several parameters such as the pH of the solution, dye concentration, dosage of adsorbent, contact time, and temperature. The adsorption of the dye was fitted using a Langmuir model (R² between 0.9980 and 0.9995) at different temperatures, and a kinetic model that was pseudo-second order (R² = between 0.9993 and 0.9929) at various initial concentrations of CR dye. In addition, the data revealed that the P3ABA/GO/CoFe₂O₄ nanocomposite exhibited a high adsorption capacity (153.92 mg/g) and removal for CR dye (98 %) at pH 5. Thermodynamic results showed the adsorption process was an endothermic and spontaneous reaction. It was found that, in terms of reusability, the P3ABA/GO/CoFe₂O₄ adsorbent can be used for up to six cycles. In this study, P3ABA/GO/CoFe₂O₄ nanocomposites were found to be low cost, and have an excellent removal capability and fast adsorption rate for CR from wastewater via a simple adsorption method. Moreover, this adsorbent nanocomposite could be simply separated from the resultant solution and recycled.     

Activated carbon blended with grape stalks powder: Properties modification and its application in a dye adsorption

In this study, activated carbon was blended with grape stalks powder to adsorb methylene blue (MB) dye with various concentrations from a wastewater. For this purpose, five independent variables involving pH (2–13), contact time (5–270 min), grape stalks powder dosage (0.1–10 g/l), methylene blue initial concentration (20–300 mg/l), and activated carbon dosage (0.1–10 g/l) for methylene blue adsorption were studied. The Central Composite Design (CCD) under Response Surface Methodology (RSM) was applied to estimate the independent variables effects on the methylene blue adsorption. The pseudo- first order, pseudo-second order, Elovich and intraparticle diffusion models were employed to study the adsorption kinetics and isotherm. The Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models were applied to investigate the adsorption isotherm. It was concluded that the intraparticle diffusion isotherm and pseudo-second order kinetic models could show the best results. Furthermore, some data such as physical adsorption (by analyzing FTR and applying some standard equations) and mean free energy (E) were discovered in this research. Finally, activated carbon blended with grape stalks powder as an effective bio-adsorbent for the methylene blue reduction from a wastewater was introduced.     

Preparation and Pb (II) adsorption in aqueous of 2D/2D g‐C3N4/MnO2 composite

A novel g‐C₃N₄/MnO₂ composite was prepared by in situ deposition of MnO₂ on graphitic carbon nitride (g‐C₃N₄) nanosheets, and its adsorption properties were evaluated for removal of Pb (II) in aqueous. Fourier transform‐infrared, spectrometer scanning electron microscopy and transmission electron microscopy characterization showed the g‐C₃N₄/MnO₂ composite had a two‐dimensional/two‐dimensional (2D/2D) structure with ample active sites. The Brunauer–Emmett–Teller specific surface area of g‐C₃N₄/MnO₂ composites (234.9 m²/g) was 13.5 times larger than that of g‐C₃N₄ (17.37 m²/g), providing better conditions for adsorption. The adsorption kinetic data were better fitted with the pseudo‐second‐order model. The Langmuir model was more suitable for describing the experimental equilibrium data of g‐C₃N₄/MnO₂, and the maximum adsorption capacity was 204.1 mg/g for Pb (II). The adsorption of g‐C₃N₄/MnO₂ composite for Pb (II) was an endothermic and spontaneous process, and reached adsorption equilibrium rapidly within initial 150 min. This composite was an excellent adsorbent because of its higher adsorption capacity and facile preparation progress.     

The selective and enhanced adsorptive behaviors of supramolecular recrystallized 1,3,5-benzenetricarboxylic acid assembled nano-bacterial cellulose

The effluent discharge produced in the textile printing and dyeing, leather and other fields, will cause the irreversible environmental pollution and extremely threatening safety of living organisms. The appropriate and efficient disposal method of dyestuff originated wastewater has been widely concerned in the past decades. In this study, the recrystallization of 1,3,5-benzene tricarboxylic acid (RCTMA) was put forward via a hydrothermal method to form the supramolecular RCTMA-based hexamer and thereafter assembled into the porous nano-bacterial cellulose (NBC) to construct the RCTMA@NBC composite. The morphology and surface properties of RCTMA@NBC were examined by scanning electron microscope, X-ray diffraction, and Fourier transform infrared spectroscopy. This RCTMA@NBC was employed to adsorb methylene blue (MB) adjusting the pH, temperature, and dosage of adsorbent. The result showed the maximal absorption capacity of RCTMA@NBC appeared under pH = 7.1 and higher temperature will hinder the adsorption of dyes. Moreover, the adsorption isotherms and kinetics were evaluated which was more confirmed to Langmuir model and quasi-second-order kinetic equation, and the simulated maximum adsorption capacities of MB was 1162.12 mg/g. Moreover, cationic golden XGL and anionic brilliant crocein were selected to further verify the distinct adsorptive behavior. The excellent affinity towards cationic dyes proved the easy combination was based on the chemical force originated from mutual attraction between opposite charges, π–π interactions, and H-bonding, whereas the poor attraction for brilliant crocein was due to the electrostatic repulsion between sulfonic and carboxyl groups. The synthesized RCTMA@NBC possesses higher efficiency and selective adsorption, which exhibits the promising potential in the field of precise treatment of organic dye wastewater.     

Crown ether-type organic composite adsorbents embedded in high-porous silica beads for simultaneous recovery of lithium and uranium in seawater

The syntheses of crown ether-type organic composite adsorbents embedded in high-porous silica beads for simultaneous recovery of lithium and uranium in seawater have been achieved and the adsorption behavior of lithium and uranium on the composite adsorbents has been examined in several types of original seawater in the wide temperature and pH ranges. As a result, the composite adsorbents composed of benzo-15-crown-5 (BC15) and benzo-18-crown-6 (BC18) showed the top-class maximum adsorption capacities for lithium [6.5 mg/g (BC15), 11 mg/g (BC18)] and uranium [12 mg/g (BC15), 4.2 mg/g (BC18)].

     

Removal of Anionic Dyes from Aqueous Solution with Layered Cationic Aluminum Oxyhydroxide

It is highly desired yet challenged to find an adsorbent with low cost and excellent performance in the removal of organic dyes from aqueous solution. Here we reported that a layered cationic aluminum oxyhydroxide material hydrothermally synthesized from the low-cost source materials of AlCl₃∙6H₂O, CaO and H₂O, known as JU-111, can meet such criterion in removing methyl orange(MO) and Congo red(CR). JU-111 shows fast adsorption kinetics[especially for CR(15 s)] and high adsorption capacity(MO:>1000 mg/g; CR:>2900 mg/g), surpassing most of the reported adsorbents. Comprehensive characterizations of the adsorption process of MO and CR revealed that both adsorptions were achieved via the anion exchange process. The characteristics of extremely low cost and excellent performance render JU-111 great potential in the practical applications in the removal of anionic dyes.     

Adaptive neuro-fuzzy interference system modelling for chlorpyrifos removal with walnut shell biochar

Accumulation of chlorpyrifos (CP), a pesticide, causes a significant environmental problem in food, surface/ground waters further to human health. The removal of the CP pollutant in surface/wastewater could be achieved by biochar due to the improved physical and chemical properties. In this work, the CP removal capacities of biochar samples derived from walnut shells at various temperatures from 450 to 900 °C were investigated. The experiments were performed as laboratory batch type study and the adsorption efficiency was determined at various conditions such as adsorbent dosage (10–500 mg/L), sorbate concentrations (100–1500 µg/L), contact time (0–300 min), initial pH (3–10), and the number of recycle.By subtracting the pyrolysis temperature from 450 °C to 900 °C, the surface areas were found to increase from 12.9 m²/g to 353.3 m²/g, respectively.The 143 experimental data were evaluated by a pair of kinetics and isotherm models and the Adaptive Neural Fuzzy Inference System (ANFIS). The developed ANFIS model was 98.56% successful in predicting the CP removal efficiency depending on the adsorption conditions. Walnut Shell Biochar (WSBC) can be applied for CP adsorption with 86.64% removal efficiency under optimum adsorption conditions (adsorbent = 250 µg/L, sorbate = 1000 µg/L, pH = 7.07 and contact time 15 min) thanks to its improved porosity. It was determined that the biochar samples could be reused 5 times. Equilibrium adsorption was observed to conform to the Langmuir isotherm, and the maximum adsorption capacity for WSBC@900 was 3.536 mg/g.     

Quartzite an efficient adsorbent for the removal of anionic and cationic dyes from aqueous solutions

Quartzite obtained from local source was investigated for the removal of anionic dye congo red (CR) and cationic dye malachite green (MG) as an adsorbent from aqueous solution in batch experiment. The adsorption process was studied as a function of dye concentration, contact time, pH and temperature. Adsorption process was described well by Langmuir and Freundlich isotherms. The adsorption capacity remained 666.7 mg/g for CR dye and 348.125 mg/g for MG dye. Data was analyzed thermodynamically, ΔH⁰ and ΔG⁰ values proved that adsorption of CR and MG is an endothermic and spontaneous process. Adsorption data fitted best in the pseudo-first order kinetic model. The adsorption data proved that quartzite exhibits the best adsorption capacity and can be utilized for the removal of anionic and cationic dyes.     

Effective removal of anionic dyes from aqueous solutions by novel polyethylenimine-ozone oxidized hydrochar (PEI-OzHC) adsorbent

The adsorption behavior of the anionic dyes Remazol Brilliant Blue R (RBBR) and Reactive Black 5 (RB5) from aqueous solutions by polyethylenimine ozone oxidized hydrochar (PEI-OzHC) was investigated. The adsorption capacities of both dyes increased with functionalization of PEI in the hydrochar adsorbent. The results of surface characterization (FTIR, BET, TGA, elemental analysis, and SEM) showed that PEI modification greatly enhanced the adsorbent surface chemistry with a slight improvement of adsorbent textural properties. In addition, the adsorption kinetics data showed an excellent adsorption efficiency as reflected in the high removal percentages of the anionic dyes. The Isotherm results indicated that RBBR and RB5 dye adsorption occurred via monolayer adsorption, and chemisorption was the rate-controlling step. The PEI-OzHC adsorbent possesses higher maximum Langmuir adsorption capacity towards RBBR (218.3 mg/g) than RB5 (182.7 mg/g). This increase in adsorption capacity is attributed to the higher number of functional groups in RBBR that interact with the adsorbent. This study reveals the potential use of adsorbents derived from pine wood hydrochar in municipal as well as industrial wastewater treatment. Furthermore, surface chemistry modification is proven as an effective strategy to enhance the performance of biomass-derived adsorbents.     

Mechanistic insights into methylene blue removal via olive stone-activated carbon: A study on surface porosity and characterization

Global attention is increasingly focused on the adverse health and environmental impacts of textile dyes, marking the necessity for effective and sustainable dye remediation strategies in industrial wastewater. This study introduces a novel, eco-friendly activated carbon produced from olive stones (OLS), a readily available by-product of the olive oil industry. The OLS was chemically activated with H₃PO₄ and KOH, creating two materials: OLS-P and OLS-K, respectively. These were then utilized as cost-effective adsorbents for the removal of methylene blue (MB) dye. The activated materials were characterized via X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FTIR), iodine number, and pHpzc analysis, with the zero-point charge determined as approximately pH 1 for OLS-P and pH 8 for OLS-K. Batch adsorption experiments conducted at various temperatures revealed that adsorption process followed the pseudo-second-order kinetic model and the Langmuir isotherm model. Temperature was found to significantly impact adsorption performance, with OLS-K demonstrating a substantial increase in adsorption capacity (q_e) from 6.27 mg/g at 23˚C to 94.7 mg/g at 32 ˚C. Conversely, OLS-P displayed a decrease in q_e from 16.78 mg/g at 23 ˚C to 3.67 mg/g at 32 ˚C as temperature increased. The study highlights the potential of KOH-treated olive stones as a promising, cost-efficient adsorbent for methylene blue remediation from wastewater.