荞麦皮生物吸附去除水中Cr(Ⅵ)的吸附特性和机理

农业废弃物荞麦皮作为生物吸附剂去除水中Cr(Ⅵ),研究了荞麦皮对Cr(Ⅵ)的去除动力学以及溶液pH、吸附剂用量和Cr(Ⅵ)初始浓度对去除效率的影响;通过FT-IR,XPS,SEM-EDX对荞麦皮表面组成和结构进行表征,探索荞麦皮去除Cr(Ⅵ)的机理.结果显示:荞麦皮对Cr(Ⅵ)有很高的去除效率.常温下5.0 g·L-1的荞麦皮在pH=2.0下对100 mg·L-1 Cr(Ⅵ)溶液的去除率可达99.87%.荞麦皮对Cr(Ⅵ)的去除率随溶液pH降低而升高,在pH=2.0时达到最大;随吸附剂用量增加而增大;随Cr(Ⅵ)初始浓度增加而减小.单位质量荞麦皮对Cr(Ⅵ)的去除量随吸附剂用量增加而减小;随Cr(Ⅵ)初始浓度增加而增加,最后趋于稳定.在20℃,pH=2.0,吸附用量为5.0 g·L-1时,荞麦皮对Cr(Ⅵ)的最大去除容量约为36.4 mg·g-1.荞麦皮吸附去除Cr(Ⅵ)的过程符合准二级吸附动力学.FT-IR,XPS和SEM-EDX分析结果表明:荞麦皮是一个多孔材料,表面存在羧基、氨基、羟基等活性基团;荞麦皮对Cr(Ⅵ)的去除是一个吸附-还原耦合的过程,包括Cr(Ⅵ)在荞麦皮表面上的静电吸附,以及此后的固相还原和对还原态的Cr(Ⅲ)再吸附;Cr(Ⅲ)的吸附主要是通过与荞麦皮表面的羧基、氨基的配位,以及与其中的阳离子发生离子交换作用实现的.     

Characteristic and Mechanism of Cr（VI） Biosorption by Buckwheat Hull from Aqueous Solutions

农业废弃物荞麦皮作为生物吸附剂去除水中Cr（VI）,研究了荞麦皮对Cr（VI）的去除动力学以及溶液pH、吸附剂用量和Cr（VI）初始浓度对去除效率的影响;通过FT-IR,XPS,SEM．EDX对荞麦皮表面组成和结构进行表征,探索荞麦皮去除Cr（VI）的机理．结果显示：荞麦皮对Cr（VI）有很高的去除效率．常温下5．0g·L^-1的荞麦皮在pH=2.0下对100mg·L^-1Cr（V0溶液的去除率可达99．87％．荞麦皮对Cr（VI）的去除率随溶液pH降低而升高,在pH=2.0时达到最大;随吸附剂用量增加而增大;随Cr（VI）初始浓度增加而减小．单位质量荞麦皮对Cr（V1）的去除量随吸附剂用量增加而减小;随Cr（VI）初始浓度增加而增加,最后趋于稳定．在20℃,pH=2．0,吸附用量为5．0g·L^-1时,荞麦皮对Cr（W）的最大去除容量约为36．4mg·g^-1．荞麦皮吸附去除Cr（Vb的过程符合准二级吸附动力学．FT-IR,XPS和SEM-EDX分析结果表明：荞麦皮是一个多孔材料,表面存在羧基、氨基、羟基等活性基团;荞麦皮对Cr（VI）的去除是一个吸附一还原耦合的过程,包括Cr（VI）在荞麦皮表面上的静电吸附,以及此后的固相还原和对还原态的Cr（Ⅲ）再吸附;Cr（Ⅲ）的吸附主要是通过与荞麦皮表面的羧基、氨基的配位,以及与其中的阳离子发生离子交换作用实现的．     

氨基改性核桃壳对废水中Cr(Ⅵ)的静态吸附研究

对1.0~1.6mm的新疆核桃壳进行改性,在其表面引入氨基基团,以此作为吸附剂,研究其对含Cr(VI)模拟废水的静态吸附性能。实验结果表明,改性核桃壳对Cr(VI)有很好的吸附作用,对于50m L浓度为20mg/L模拟水样,当温度为25℃,水样初始p H值为5.89,吸附剂用量为0.50g,吸附时间为180min时,Cr(VI)的去除率可以达到98.6%,并且随着体系温度的升高,改性核桃壳对Cr(VI)的吸附量逐渐增加。吸附等温线拟合结果表明,Langmuir吸附等温模型能更好地描述上述吸附过程。     

氨基功能化纳米Fe3O4磁性高分子吸附剂对废水中Cr(VI)的吸附研究

采用分散聚合法通过共聚、开环反应, 对纳米Fe3O4进行表面功能化修饰, 得到富含NH2官能团的纳米磁性高分子复合材料. 通过透射电镜(TEM)、振动样品磁强计(VSM)、热重差热分析(TGA)、X射线衍射(XRD)、红外光谱(IR)等对其进行表征, 着重研究了其作为吸附剂对Cr(VI)的吸附性能. 结果表明: 该吸附剂对Cr(VI)的吸附能在10 min内达到平衡; 废水溶液pH值能显著影响吸附剂对Cr(VI)的吸附效果, pH为2.5时效果最佳. 废水中Cr(VI)的初始浓度、吸附时间、温度等因素对吸附效果均有不同程度的影响. 结合相应pH值下Cr(VI)的形态分布, 探讨了这种新型材料对Cr(VI)的吸附机理. 结果表明: 其吸附机理及吸附容量与废水中Cr(VI)的离子形式有关; 吸附过程以离子交换与静电引力为主. 等温吸附数据符合Langmuir模型, T＝308 K, pH＝2.5, V＝40 mL时, 吸附剂的饱和吸附容量qm＝25.58 mg/g. 吸附为吸热过程, 焓变ΔH＝8.64 kJ/mol.     

废轮胎回转窑中试热解炭的重金属离子吸附特性

对废轮胎回转窑中试热解炭的重金属离子Pb2＋、Cr3＋和Cr6＋吸附特性进行了研究，分析了溶液pH值、接触时间、吸附剂用量以及溶液初始浓度对重金属去除率的影响。结果表明，溶液pH值对热解炭的重金属去除率有显著影响，阳离子Pb2＋、Cr3＋的去除率随pH的增加而增大，在弱酸和中性环境中去除率接近100％；Cr6＋在强酸性溶液中被还原成为Cr3＋，经二次吸附，总Cr去除率可达99％以上；Pb2＋和Cr3＋的去除率随热解炭用量和吸附时间的增大而增加，热解炭用量和吸附时间有一个最佳值。Pb2＋和Cr3＋的吸附为单分子层吸附，可用Langnuir和两段Freundlich等温吸附式描述，Freundlich拟合指数表明，热解炭具有较好的吸附性能。经酸洗后的热解炭对Pb2＋的去除率变低。     

生物吸附剂菹草干粉对Cr(Ⅵ)的吸附性能

开发了高效去除重金属Cr(Ⅵ)污染的生物吸附剂,菹草(Potamogeton crispus)干粉吸附剂,通过单因素分析考察了吸附时间、吸附剂颗粒大小、溶液初始pH值、吸附剂用量、Cr(Ⅵ)初始浓度以及离子强度等对重金属离子Cr(Ⅵ)的吸附性能。 结果表明,对吸附效果影响显著的因素有Cr(Ⅵ)初始浓度、吸附剂颗粒大小、溶液初始pH值和离子强度;其吸附行为符合准二级动力学方程,相关系数为0.9998;菹草对Cr(Ⅵ)的吸附等温线符合Langmuir方程。     

交联化羟丙基壳聚糖对Cr(Ⅵ)的吸附与结构分析

研究了交联化羟丙基壳聚糖对Cr(Ⅵ)的吸附作用,探讨了溶液的pH值、反应时间、温度、初始浓度等因素对其吸附性能的影响,并且用FTIR、XRD和SEM对吸附前后物质进行了表征与结构分析。实验表明,pH是交联羟丙基壳聚糖吸附Cr(Ⅵ)的主要影响因素。在pH=5时,对Cr(Ⅵ)初始浓度为15mg/L的溶液,可控制温度在20℃左右吸附2h,吸附剂交联羟丙基壳聚糖用量为1g/100mL溶液即能达到满意的吸附效果。吸附后由于交联羟丙基壳聚糖与Cr(Ⅵ)的配位作用使得交联羟丙基壳聚糖的结晶性明显降低;Cr(Ⅵ)的配位使得交联羟丙基壳聚糖的表面形貌发生了改变。     

氨基功能化纳米Fe3O4磁性高分子吸附剂对废水中Cr(Ⅵ)的吸附研究

采用分散聚合法通过共聚、开环反应,对纳米Fe3O4进行表面功能化修饰,得到富含NH2官能团的纳米磁性高分子复合材料.通过透射电镜(TEM)、振动样品磁强计(VSM)、热重差热分析(TGA)、X射线衍射(XRD)、红外光谱(IR)等对其进行表征,着重研究了其作为吸附剂对Cr(Ⅵ)的吸附性能.结果表明:该吸附剂对Cr(Ⅵ)的吸附能在10 min内达到平衡;废水溶液pH值能显著影响吸附剂对Cr(Ⅵ)的吸附效果,pH为2.5时效果最佳.废水中Cr(VI)的初始浓度、吸附时间、温度等因素对吸附效果均有不同程度的影响.结合相应pH值下Cr(Ⅵ)的形态分布,探讨了这种新型材料对Cr(Ⅵ)的吸附机理.结果表明:其吸附机理及吸附容量与废水中Cr(Ⅵ)的离子形式有关;吸附过程以离子交换与静电引力为主.等温吸附数据符合Langmuir模型,T=308 K pH=2.5,V=40 mL时,吸附剂的饱和吸附容量qm=25.58 mg/g.吸附为吸热过程,焓变△H=8.64 kJ/mol.     

油茶果壳活性炭的制备及其对Cr(Ⅵ)的去除

利用磷酸活化法制备油茶果壳活性炭,并将其作为吸附剂用于去除水溶液中的Cr(Ⅵ),同时探讨了不同参数(Cr(Ⅵ)的初始浓度、吸附剂的用量、pH、温度等)对油茶果壳活性炭吸附Cr(Ⅵ)的影响。结果表明:当温度为293 K,Cr(Ⅵ)初始浓度为250 mg/L,pH为2.0时,Cr(Ⅵ)的最大吸附量可达165.0 mg/L。根据吸附动力学原理,发现其吸附过程遵循拟二级动力学模型。Cr(Ⅵ)的去除程度随Cr(Ⅵ)初始浓度的升高而增加,且其平衡数据与Freundlich模型拟合良好。     

活性炭纤维电吸附重金属及磺胺甲恶唑性能研究

使用盐酸对吸附剂活性炭纤维（activated carbon fiber,ACF）进行改性,通过SEM、BET和FTIR对改性前后的ACF形貌及结构进行系统表征发现,改性后ACF较改性前表面杂质减少且沟壑更加明显,比表面积提高22%,微孔体积增加5%,含氧官能团（C-O和C=O）明显增多. 以水中重金属离子（Zn(II)及Cr(VI)）和抗生素磺胺甲恶唑（Sulfamethoxazole,SMX）为目标污染物,研究改性后ACF对目标污染物的吸附（静吸附和电吸附）性能,考察了浓度、pH、外加电压对吸附的影响. 结果表明,ACF用量为5 g,电压为1.2 V,Zn(II)、Cr(VI)及SMX浓度均为10 mg·L^-1,Zn(II)溶液pH为5时,ACF吸附水中Zn(II)的最大吸附量为9.25 mg·g^-1,是静吸附条件的2.15倍;Cr(VI)溶液pH为4时,ACF吸附Cr(VI)的最大吸附量为8.86 mg·g^-1,是静吸附条件的1.96倍;SMX溶液pH为6时,ACF吸附SMX的最大吸附量为8.32 mg·g^-1,是静吸附条件的1.84倍. ACF吸附Zn(II)、Cr(VI)及SMX的动力学曲线均符合准二级动力学模型,吸附过程为化学吸附. Freundlich等温模型能更好地描述ACF对Zn(II)、Cr(VI)及SMX的吸附特性,其吸附形式为多分子层吸附. ACF通过电极反接方式进行循环再生,脱附速率快且脱附效果明显,经4次循环再生后,ACF对Zn(II)、Cr(VI)及SMX的去除率均在90%以上.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.