Enzymatically Crosslinked Emulsion Gels Using Star‐Polymer Stabilizers

A novel type of emulsion gel based on star‐polymer‐stabilized emulsions is highlighted, which contains discrete hydrophobic oil and hydrophilic aqueous solution domains. Well‐defined phenol‐functionalized core‐crosslinked star polymers are synthesized via reversible addition‐fragmentation chain transfer (RAFT)‐mediated dispersion polymerization and are used as stabilizers for oil‐in‐water emulsions. Horseradish‐peroxidase‐catalyzed polymerization of the phenol moieties in the presence of H₂O₂ enables rapid formation of crosslinked emulsion gels under mild conditions. The crosslinked emulsion gels exhibit enhanced mechanical strength, as well as widely tunable composition.

     

Self‐Assembling Hydrogels Crosslinked Solely by Receptor–Ligand Interactions: Tunability,Rationalization of Physical Properties,and 3D Cell Culture

We report a novel, noncovalent hydrogel system crosslinked solely by receptor–ligand interactions between biotin and avidin. The simple hydrogel synthesis and functionalization together with the widespread use of biotinylated ligands in biosciences make this versatile system suitable for many applications. The gels possess a range of tunable physical properties, including stiffness, lifetime, and swelling. The erosion rates, unexpectedly fast compared to the kinetic parameters for biotin–avidin, are explored in terms of stretching tensions on the polymers, a concept well‐known on the single‐molecule level, but largely unexplored in supramolecular systems. As proof of utility, the gels were functionalized with different peptide sequences to control human mesenchymal stromal cell morphology in 3D culture.     

Swelling Behavior of pH-Sensitive Copolymers Containing 2-Acrylamido-2-Methyl Propane Sulfonic Acid and Acrylic Acid Crosslinked with Vinyl Trimethoxy Silane Crosslinker

Copolymers of 2-acrylamido-2-methyl propane sulfonic acid and acrylic acid were crosslinked in the presence of different mol% of either vinyl trimethoxy silane (VTMS) as the crosslinking agent under acidic conditions or N,N-methylenebisacrylamide (MBA) as crosslinker using solution radical polymerization. The resultant xerogels were characterized by extracting the soluble fractions and measuring the equilibrium water content. Soluble fractions of the crosslinked networks were reduced by varying the MBA and VTMS concentrations. The surface morphology of the crosslinked polymers was observed by scanning electron microscope. The influence of pH on the swelling behavior of gels was investigated. The swelling behaviors of the resulting gels show pH sensitivity.     

Shear‐reversibly Crosslinked Alginate Hydrogels for Tissue Engineering

Injectable delivery vehicles in tissue engineering are often required for successful tissue formation in a minimally invasive manner. Shear‐reversibly crosslinked hydrogels, which can recover gel structures from shear‐induced breakdown, can be useful as an injectable, because gels can flow as a liquid when injected but re‐gel once placed in the body. In this study, injectable and shear‐reversible alginate hydrogels were prepared by combination crosslinking using cell‐crosslinking and ionic crosslinking techniques. The addition of a small quantity of calcium ions decreased the number of cells that were required to form cell‐crosslinked hydrogels without changing the shear reversibility of the system. The physical properties and gelation behavior of the gels were dependent on the concentration of both the cells and the calcium ions. We found that gels crosslinked by combination crosslinking methods were effective to engineer cartilage tissues in vivo. Using both ionic and cell‐crosslinking methods to control the gelation behavior may allow the design of novel injectable systems that can be used to deliver cells and other therapeutics for minimally invasive therapy, including tissue engineering.

     

Zr(IV)‐Crosslinked Polyacrylamide/Polyanionic Cellulose Composite Hydrogels with High Strength and Unique Acid Resistance

Recently, metal coordination has been widely utilized to fabricate high‐performance hydrogels, but conventional metal‐based hydrogels face some drawbacks, such as staining or acid lability. In the present study, a novel kind of colorless Zr(IV)‐crosslinked polyacrylamide/polyanionic cellulose (PAM/PAC) composite hydrogel with unique acid resistance was constructed via acrylamide polymerization in a PAC solution, followed by posttreatment in a zirconium oxychloride (ZrOCl₂) solution. The prepared gels were characterized in terms of Fourier transform infrared spectroscopy, scanning electron microscopy, and tensile and compressive mechanics, as well as acid resistance. Inside the gels, the synergistic action of hydrogen bonding and Zr(IV) coordination is responsible for their improved mechanical properties and good energy dissipation ability. One hydrogel with nearly 90 wt % of water content can sustain approximately 5 MPa of compression stress at 90% strain without damage. Both microscopic network structures and macroscopic mechanics demonstrate facile adjustability via changing the PAC dosages in polymerization and/or ZrOCl₂ concentrations in posttreatment. Moreover, the gels present unexpected acid resistance due to the strong Zr(IV) coordination with PAC, demonstrating their potential application as hydrogel electrolytes in supercapacitors. The current work provides a new approach to fabricate metal coordination‐based high strength, colorless hydrogels with acid resistance. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 981–991     

Crosslinked polyamide based on main‐chain type polybenzoxazines derived from a primary amine‐functionalized benzoxazine monomer

Two types of main‐chain type polybenzoxazines with amide and benzoxazine groups as repeating units in the main chain, termed as poly(amide‐benzoxazine), have been synthesized. They have been prepared by polycondensation reaction of primary amine‐bifunctional benzoxazine with adipoyl and isophthaloyl dichloride using dimethylacetamide as solvent. Additionally, a model reaction is designed from the reaction of 3,3′‐(4,4′‐methylenebis(4,1‐phenylene))bis(3,4‐dihydro‐2H‐benzo[e][1,3]oxazin‐6‐amine) with benzoyl chloride. The structures of model compound and polyamides are confirmed by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopies. Differential scanning calorimetry and FTIR are also used to study crosslinking behavior of both the model compound and polymers. Thermal properties of the crosslinked polymers are also studied by thermogravimetric analysis. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Relaxivity of Gd-Based MRI Contrast Agents in Crosslinked Hyaluronic Acid as a Model for Tissues

The efficiency of MRI contrast agents depends on the relaxation rate enhancement that they can induce at imaging fields. It is well known that, at these fields, large relaxation rates are obtained by binding of gadolinium(III) ions to large molecules. By the same token, the interaction of the gadolinium(III) complexes with macromolecules that are found in biological tissues can be responsible for an increase of the relaxation rate with respect to the value observed in liquids. We investigate here the relaxation enhancement of gadoteridol (Gd-HP-DO3A) in crosslinked hyaluronic acid, taken as model tissue, using fast field-cycling relaxometry. The analysis of the relaxation profiles as a function of the magnetic fields indicates that a sizable increase in the relaxation rates is due to a modest interaction of the contrast agent with the hydrogel and to the slower mobility of the water molecules outside the first-coordination sphere of the gadolinium(III) ion.     

Enhanced Bone Defect Repair by Polymeric Substitute Fillers of MultiArm Polyethylene Glycol‐Crosslinked Hyaluronic Acid Hydrogels

Bone regeneration is still one of the greatest challenges for the treatment of bone defects since no current clinical approach has been proven effective. To develop an alternative biodegradable bone graft material, multiarm polyethylene glycol (PEG) crosslinked hyaluronic acid (HA) hydrogels are synthesized and applied to promote osteogenesis of mesenchymal stem cells (MSCs) with the ultimate goal for bone defect repair. The multiarm PEG‐HA hydrogels provide a significant improvement of alkaline phosphatase (ALP) activity and calcium mineralization of the in vitro encapsulated MSCs under osteogenic condition after 3, 7, and 28 days. In addition, the multiarm PEG‐HA hydrogels also facilitate healing of the cranial bone defects more effectively in a Sprague Dawley rat model after 10 weeks of implantation based on histological evaluations and microcomputed tomography analysis. These promising results set the stage for the development of innovative biodegradable hydrogels to provide a more effective and versatile treatment option for bone regeneration.     

A color‐code for glycosaminoglycans identification by means of polyacrylamide gel electrophoresis stained with the cationic carbocyanine dye Stains‐all

Cationic dyes such as toluidin blue are commonly employed to visualize glycosaminoglycans (GAGs) on electrophoresis gels; however, the carbocyanine‐based dye Stains‐all have been increasingly used to stain the non‐sulfated hyaluronic acid and other GAGs in submicrogram quantities. In this short communication, we demonstrate that Stains‐all is able to stain the most common GAGs on polyacrylamide gels with distinct and contrasting colors in a reproducible manner. We also show that this staining method is useful to identify GAGs present both in mixtures and in submicrogram quantities. Therefore, Stains‐all has shown to be useful in identifying GAGs on polyacrylamide gels with basis on their specific colors, at least on screening level.     

Long‐Distance Electronic Energy Transfer in Light‐Harvesting Supramolecular Polymers

The efficient collection of solar energy relies on the design and construction of well‐organized light‐harvesting systems. Herein we report that supramolecular phenanthrene polymers doped with pyrene are effective collectors of light energy. The linear polymers are formed through the assembly of short amphiphilic oligomers in water. Absorption of light by phenanthrene residues is followed by electronic energy transfer along the polymer over long distances (>100 nm) to the accepting pyrene molecules. The high efficiency of the energy transfer, which is documented by large fluorescence quantum yields, suggests a quantum coherent process.     

Characterization of ring‐opening polymerization of genipin and pH‐dependent cross‐linking reactions between chitosan and genipin

In this study, a novel chitosan‐based polymeric network was synthesized by crosslinking with a naturally occurring crosslinking agent—genipin. The results showed that the crosslinking reactions were pH‐dependent. Under basic conditions, genipin underwent a ring‐opening polymerization prior to crosslinking with chitosan. The crosslink bridges consisted of polymerized genipin macromers or oligomers (7 ～ 88 monomer units). This ring‐opening polymerization of genipin was initiated by extracting proton from the hydroxyl groups at C‐1 of deoxyloganin aglycone, followed by opening the dihydropyran ring to conduct an aldol condensation. At neutral and acidic conditions, genipin reacted with primary amino groups on chitosan to form heterocyclic amines. The heterocyclic amines were further associated to form crosslinked networks with short chains of dimmer, trimer, and tetramer bridges. An accompanied reaction of nucleophilic substitution of the ester group on genipin by the primary amine group on chitosan would occur in the presence of an acid catalysis. The extent in which chitosan gels crosslinked with genipin was significantly dependent on the crosslinking pH values: 39.9 ± 3.8% at pH 5.0, 96.0 ± 1.9% at pH 7.4, 45.4 ± 1.8% at pH 9.0, and 1.4 ± 1.0% at pH 13.6 (n = 5, p < 0.05). Owing to the different crosslinking extents and different chain lengths of crosslink bridges, the genipin‐crosslinked chitosan gels showed significant difference in their swelling capability and their resistance against enzymatic hydrolysis, depending on the pH conditions for crosslinking. These results indicated a direct relationship between the mode of crosslinking reaction, and the swelling and enzymatic hydrolysis properties of the genipin‐crosslinked chitosan gels. The ring‐opening polymerization of genipin and the pH‐dependent crosslinking reactions may provide a novel way for the preparation and exploitation of chitosan‐based gels for biomedical applications. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1985–2000, 2005     

One‐Pot Automated Synthesis of Quasi Triblock Copolymers for Self‐Healing Physically Crosslinked Hydrogels

The preparation of physically crosslinked hydrogels from quasi ABA‐triblock copolymers with a water‐soluble middle block and hydrophobic end groups is reported. The hydrophilic monomer N‐acryloylmorpholine is copolymerized with hydrophobic isobornyl acrylate via a one‐pot sequential monomer addition through reversible addition fragmentation chain‐transfer (RAFT) polymerization in an automated parallel synthesizer, allowing systematic variation of polymer chain length and hydrophobic–hydrophilic ratio. Hydrophobic interactions between the outer blocks cause them to phase‐separate into larger hydrophobic domains in water, forming physical crosslinks between the polymers. The resulting hydrogels are studied using rheology and their self‐healing ability after large strain damage is shown.

     

A Guiding Principle for Strengthening Crosslinked Polymers: Synthesis and Application of Mobility‐Controlling Rotaxane Crosslinkers

Three component mobility controlling vinylic rotaxane crosslinkers with two radically polymerizable vinyl groups ( RC_R s) were synthesized to prove that the mobility of the components of the RC_R s plays a crucial role in determining the properties of rotaxane‐crosslinked polymers (RCPs). RC_R s (R=H, Me, or Et) were obtained from living ring‐opening polymerization. RCP_Et was prepared using RC_Et , which exhibits the lowest component mobility. The low component mobility is reflected in inferior mechanical strength and stretching ability in tensile stress tests compared to components with good (R=Me) and high (R=H) mobility. However, RCP_Et exhibited significantly higher stress and strain values than the corresponding covalently crosslinked polymers ( CCP_R s). These results indicate that a suitable component mobility substantially enhances the mechanical strength of RCPs. This behavior could serve as a guiding principle for the molecular design of advanced RCs.     

Phenylboronate‐diol crosslinked polymer/SWCNT hybrid gels with reversible sol–gel transition

This work demonstrates the successful incorporation of functionalized single‐walled carbon nanotubes (f‐SWCNTs) into the phenylboronate‐diol crosslinked polymer gel to create a hybrid system with reversible sol–gel transition. The phenylboronic acid‐containing and diol‐containing polymers were first separately prepared by the reversible addition–fragmentation chain transfer polymerization. Covalent functionalization of single‐walled carbon nanotubes (SWCNTs) with an azide‐derivatized, diol‐containing polymer was then accomplished by a nitrene addition reaction. Subsequently, the hybrid gels were prepared by crosslinking the mixture of f‐SWCNTs and diol‐containing polymer with the phenylboronic acid‐containing polymer. The hybrid gel has been characterized by scanning electron microscopy (SEM) and rheological analysis. The SEM measurement demonstrated a homogeneous dispersion of f‐SWCNTs within the gel matrices. Rheological experiments also demonstrated that the hybrid gel exhibited storage moduli significantly higher than those of the native gel obtained from the phenylboronic acid‐containing and diol‐containing polymers. The hybrid gel can be switched into their starting polymer (f‐SWCNTs) solutions by adjusting the pH of the system. Moreover, the hybrid gel revealed a self‐healing property that occurred autonomously without any outside intervention. By employing this dynamic character, it is possible to regenerate the used gel, and thus, it has the potential to perform in a range of dynamic or bioresponsive applications Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation of temperature‐responsive polymer gels physically immobilizing core‐shell type bioconjugates

Poly(N‐isopropylacrylamide) (PNIPAAm) gels are temperature‐responsive polymer gels; and were prepared by redox polymerization of N‐isopropylacrylamide in the presence of N,N′‐methylenebisacrylamide as a crosslinking reagent and core‐shell type bioconjugates, which were core‐crosslinked polyion complex micelles formed from the mixture of bovine pancreas trypsin and poly(ethylene glycol)‐block‐poly(α,β‐aspartic acid). The phase transition temperature of PNIPAAm gels was no change with physically immobilization of bioconjugates. Also, the enzymatic activity of bioconjugates was essentially maintained even in PNIPAAm gels, although enzymatic reaction rate was apparently controlled by temperature, i.e., by the degree of swelling of PNIPAAm gels. Further, the control of enzymatic reaction synchronizing the phase transition of PNIPAAm gels immobilized bioconjugates. PNIPAAm gels could immobilize core‐shell type bioconjugates, and were successfully prepared without interfering with the properties of temperature‐responsive polymer gels and the bionanoreactor. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5942–5948, 2007     

Spin‐Crossover Physical Gels: A Quick Thermoreversible Response Assisted by Dynamic Self‐Organization

Iron(II) triazolate coordination polymers with lipophilic sulfonate counterions with alkyl chains of different lengths have been synthesized. In hydrocarbon solvents, these polymers formed a physical gel and showed a thermoreversible spin transition upon the sol–gel phase transition. The formation of a hydrogen‐bonding network between the triazolate moieties and sulfonate ions, bridged by water molecules, was found to play an important role in the spin‐crossover event. The spin‐transition temperature was tuned over a wide range by adding a small amount of 1‐octanol, a scavenger for hydrogen‐bonding interactions. This additive was essential for the iron(II) species to adopt a low‐spin state. Compared with nongelling references in aromatic solvents, the spin‐crossover physical gels are characterized by their quick thermal response, which is due to a rapid restoration of the hydrogen‐bonding network, possibly because of a dynamic structural ordering through an enhanced lipophilic interaction of the self‐assembling components in hydrocarbon solvents.     

Remarkable Regioisomer Control in the Hydrogel Formation from a Two‐Component Mixture of Pyridine‐End Oligo(p‐phenylenevinylene)s and N‐Decanoyl‐L‐alanine

N‐Decanoyl‐L ‐alanine (DA) was mixed with either colorless 4,4′‐bipyridine (BP) or various derivatives such as chromogenic oligo(p‐phenylenevinylene) (OPV) functionalized with isomeric pyridine termini in specific molar ratios. This mixtures form salt‐type gels in a water/ethanol (2:1, v/v) mixture. The gelation properties of these two‐component mixtures could be modulated by variation of the position of the ′′N′′ atom of the end pyridyl groups in OPVs. The presence of acid–base interactions in the self‐assembly of these two‐component systems leading to gelation was probed in detail by using stoichiometry‐dependent UV/Vis and FTIR spectroscopy. Furthermore, temperature‐dependent UV/Vis and fluorescence spectroscopy clearly demonstrated a J‐type aggregation mode of these gelator molecules during the sol‐to‐gel transition process. Morphological features and the arrangement of the molecules in the gels were examined by using scanning electron microscopy (SEM), atomic force microscopy (AFM), and X‐ray diffraction (XRD) techniques. Calculation of the length of each molecular system by energy minimization in its extended conformation and comparison with the XRD patterns revealed that this class of gelator molecules adopts lamellar organizations. Rheological properties of these two‐component systems provided clear evidence that the flow behavior could be modulated by varying the acid/amine ratio. Polarized optical microscopy (POM), differential scanning calorimetry (DSC), and XRD results revealed that the solid‐phase behavior of such two‐component mixtures (acid/base=2:1) varied significantly upon changing the proton‐acceptor part from BP to OPV. Interestingly, the XRD pattern of these acid/base mixtures after annealing at their associated isotropic temperature was significantly different from that of their xerogels.     

One‐pot fabrication of robust interpenetrating hydrogels via orthogonal click reactions

Interpenetrating polymer network (IPN) hydrogels have been fabricated through a facile one‐pot approach from tetra/bifunctional telechelic macromonomers with epoxy, amine, azide, and alkyne groups by orthogonal double click reactions: epoxy‐amine reaction and copper‐catalyzed azide‐alkyne cycloaddition. Both the crosslinked networks are simultaneously constructed in water from the biocompatible poly (ethylene glycol)‐based macromonomers. The crosslinking density of each network was finely tuned by the macromonomer structure, permitting control of network molecular weights between crosslinks of the final gels. Compared to corresponding single network gels, the IPN gels containing both tightly and loosely crosslinked networks exhibited superior mechanical properties with shear moduli above 15 kPa and fracture stresses over 40 MPa. The synthetic versatility of this one‐pot approach will further establish design principles for the next generation of robust hydrogel materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1459–1467     

Acid‐Degradable Core‐Crosslinked Micelles Prepared from Thermosensitive Glycopolymers Synthesized via RAFT Polymerization

A thermoresponsive block copolymer, namely poly(acryloyl glucosamine)‐block‐poly(N‐isopropylacryamide) (PAGA₁₈₀‐b‐PNIPAAM₃₅₀) was simultaneously self‐assembled and crosslinked in aqueous medium via RAFT polymerization at 60 °C to afford core‐crosslinked micelles exhibiting a glycopolymer corona and a PNIPAAM stimuli‐responsive core. An acid‐labile crosslinking agent, 3,9‐divinyl‐2,4,8,10‐tetraoxaspiro[5.5]undecane, was employed to generate thermosensitive and acid‐degradable core‐shell nanoparticles. Stable against degradation at pH = 6 and 8.2, the resulting core crosslinked micelles readily hydrolyzed into well‐defined free block copolymers at lower pH (30 min and 12 h respectively at pH = 2 and 4).

     

Synthesis and Characterization of Crosslinked Polymers for Biomedical Composites

Three kinds of low molecular weight unsaturated polyesters containing carbon-carbon double bonds were synthesized by the reaction of poly (ε-caprolactone) diol or D,L-lactide and glycolic acid with maleic anhydride or fumaric acid. These functionalized polymers were thermally crosslinked in the presence of radical initiator to prepare the crosslinked polymers available as a matrix resin for biomedical composites. Hydrolysis of the crosslinked polyesters was investigated in buffer solution at 37°C.