α‐exomethylene lactone possessing acetal–ester linkage: Polymerization and postpolymerization modification for water‐soluble polymer

2,6‐Dimethyl‐5‐methylene‐1,3‐dioxa‐4‐one (DMDO), a cyclic acrylate possessing acetal–ester linkage, was obtained as a mixture of cis‐ and trans‐isomers (95:5) from Baylis–Hillman reaction of an aryl acrylate. The radical and anionic polymerizations of DMDO yielded the corresponding vinyl polymers without any side reactions such as cleavage of the acetal–ester linkage. The polymerization behaviors were significantly different from that of the acyclic acrylate, α‐(hydroxymethyl)acrylic acid, which was expected inactive against polymerization due to the steric hindrance around the vinylidene group by the α‐substituent. The acetal–ester linkage of the obtained polymer ( P1 ) was completely cleaved via acid hydrolysis to afford a water soluble polymer, P2 . © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 955–961     

Efficient water‐soluble drag reducing star polymers with improved mechanical stability

We describe here the first example of the synthesis of 4‐arm star poly(acrylic acid) for use as a water‐soluble drag reducing agent, by applying Cu(0)‐mediated polymerization technique. High molecular weight 4‐arm star poly(tert‐butyl acrylate) (M_n = 3.0–9.0 × 10⁵ g mol^?1) was first synthesized using 4,4′‐oxybis(3,3‐bis(2‐bromopropionate)butane as an initiator and a simple Cu(0)/TREN catalyst system. Then, 4‐arm star poly(tert‐butyl acrylate) were subjected to hydrolysis using trifluoroacetic acid resulting in water‐soluble 4‐arm star poly(acrylic acid). Drag reduction test rig analysis showed 4‐arm star poly(acrylic acid) to be effective as a drag reducing agent with drag reduction of 24.3%. Moreover, 4‐arm star poly(acrylic acid) exhibited superior mechanical stability when compared with a linear poly(acrylic acid) and commercially available drag reducing polymers; Praestol and poly(ethylene oxide). The linear poly(acrylic acid), Praestol, and poly(ethylene oxide) all showed a large decrease in drag reduction of 8–12% when cycled 30 times through the drag reduction test rig while, in contrast, 4‐arm star poly(acrylic acid) demonstrated much higher mechanical stability. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 335–344     

Synthesis and FET characterization of novel ambipolar and low‐bandgap naphthalene‐diimide‐based semiconducting polymers

A novel series of naphthalene‐diimide‐based semiconducting polymers ( P1–P4 ) containing benzodithiophene or dithienopyrrole were successfully synthesized for ambipolar semiconducting materials showing near infrared absorptions. The incorporation of a 3‐hexylthiophene (3HT) spacer extended the intramolecular charge‐transfer (ICT) peak from λ_onset = 739 nm ( P1 ) to 785 nm ( P3 ). Moreover, about 250 nm red‐shift of the ICT peaks was observed in P2 and P4 compared to P1 and P3 due to the increased high‐lying HOMO energy levels. The grazing incidence X‐ray scattering of the P3 and P4 films proved the slightly improved crystalline order in the π?π stacking direction, indicating that the planar backbone is probably due to the introduced 3HT. The P1–P4 ‐based field‐effect transistor showed n‐type dominant ambipolar characteristics. The P2 and P4 showed higher electron mobilities up to 1.5 × 10^?2 cm² V^?1 s^?1 than P1 and P3 , which might be influenced by the orientation of the polymer backbone and the intermolecular orbital overlap. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 359–367     

Crosslinkable high dielectric constant polymer dielectrics for low voltage organic field‐effect transistor memory devices

I n this study, we successfully synthesized water/methanol soluble random copolymers with a high dielectric constant, poly(n‐(hydroxymethyl) acrylamide‐co‐5‐(9‐(5‐(diethylamino)pentyl)?2‐(4‐vinylphenyl)?9H‐fluorene(P(NMA‐co‐F6NSt)), which contained chemical crosslinkable segment (NMA) and hole trapping building block (F6NSt). The feeding molar ratios of two monomers (NMA:F6NSt) were set as 100:0, 95:5, 80:20, and 67:33 for the copolymers of P1 , P2 , P3, and P4 , respectively. The crosslinked P(NMA‐co‐F6NSt) thin film could serve as both dielectric and charge storage layers in organic field‐effect transistor (OFET) memory device and exhibited high k (i.e., 4.91–6.47) characteristics, leading to a low voltage operation and a small power consumption. Devices based on the P1 ‐ P4 dielectrics showed excellent insulating properties and good charge storage performance under a low operating voltage in a range of ±5V because of tightly network structures and well‐dispersed trapping cites. In particular, P3 ‐based memory device exhibited a large memory window of 4.13 V with stable data retention stability over 10⁴ s, a large on/off ratio of 10⁴, and good endurance characteristics as high as 200 cycles. The above results suggested that a high‐performance OFET memory device could be facilely achieved using the novel crosslinkable high‐k copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3224–3236     

Synthesis of polymerizable poly(alkenoic acid)s via reversible addition fragmentation transfer polymerization for dental applications

The novel polymerizable poly(alkenoic acid)s 1a–1c (expected = 2500, 5000, and 10,000 g/mol) were synthesized in three steps starting from tert‐butyl acrylate. A RAFT polymerization using 2,2‐(thiocarbonylbis(sulfanediyl))bis(2‐methylpropanoic acid) 4 as a chain transfer agent, followed by a Mitsunobu esterification and a deprotection of the tert‐butyl ester groups with trifluoroacetic acid, provided the desired acidic polymers in moderate to good yields. The synthesized polymers were characterized by ¹H NMR spectroscopy and by gel permeation chromatography. The number‐average molecular weights measured for 1a–1c were in good agreement with the expected values. Self‐etch adhesives (SEAs) based on poly(alkenoic acid)s 1a–1c were formulated in order to investigate their adhesive properties. The addition of 1a–1c to a SEA formulation containing 10‐methacryloyloxydecyl dihydrogen phosphate resulted in a strong increase of the shear bond strength (SBS) of a dimethacrylate‐based composite to dentin. No significant influence of the polymer molecular weight on the dentin and enamel SBS was observed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1814–1821     

Polyurea microcapsules from isocyanatoethyl methacrylate copolymers

The synthesis of two types of isocyanate side chain containing copolymers, poly(methyl methacrylate‐co‐isocyanatoethyl methacrylate) (P(MMA‐co‐IEM)) and poly(benzyl methacrylate‐co‐isocyanatoethyl methacrylate) (P(BnMA‐co‐IEM)), which were synthesized by Cu(0)‐mediated radical polymerization, is reported. Polymerization proceeded to high conversion giving polymers of relatively narrow molar mass distributions. The incorporation of the bulky aromatic groups in the latter copolymer rendered it sufficiently stable toward hydrolysis and enabled the isolation of the product and its characterization by ¹H and ¹³C NMR, and FTIR spectroscopy and SEC. Both P(MMA‐co‐IEM) and P(BnMA‐co‐IEM) were functionalized with dibutylamine, octylamine, and (R)‐(+)‐α‐methylbenzyl‐amine, which further proved the successful incorporation of the isocyanate groups. Furthermore, P(BnMA‐co‐IEM) was used for the fabrication of liquid core microcapsules via oil‐in‐water interfacial polymerization with diethylenetriamine as crosslinker. The particles obtained were in the size range of 10–90 µm in diameter independent of the composition of copolymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2698–2705     

Site‐selective synthesis and characterization of BODIPY–acetylene copolymers and their transistor properties

To study the effect of site‐selective copolymerization of borondipyrromethene (BODIPY) with acetylene on the structural and optoelectronic properties, three copolymers P1–P3 were synthesized by the Sonogashira cross‐coupling of BODIPY units with diacetylene and bromine capping through all the possible linkages: α‐α ( P1 ), α‐β ( P2 ), and β‐β ( P3 ). The optoelectronic properties of the polymers were investigated systematically to understand the effect of site‐selective polymerization. The HOMO levels of the polymers were significantly tuned from P1 to P3 with negligible change in the LUMO levels. Broadening of absorption spectra from P3 to P1 was observed because of increase in the extent of conjugation. Additionally, the charge transport properties of these polymers in organic thin‐film transistors (OTFTs) revealed that P1 and P3 exhibited only p‐type mobility, whereas P2 exhibited electron mobility. Notably, the further investigations of the surface morphology of polymer films by atomic force microscopy (AFM) unveiled that comb like nanostructural arrangements in P3 was beneficial for the charge‐carrier mobility over the circular arrangements in P1 and P2 . © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1978–1986     

Polymers with alternating anthracene and phenylene building blocks linked by ethynylene and/or vinylene units: Studying structure‐properties‐relationships

Four conjugated polymers ( P1 – P4 ) consisting of alternating anthracene‐9,10‐diyl and 1,4‐phenylene building blocks connected via ethynylene as well as vinylene ( P1 and P2 ), ethynylene‐only ( P3 ), and vinylene‐only ( P4 ) moieties, respectively, were synthesized and studied. The phenylene units in all four polymers bear 2‐ethylhexyloxy side‐chains to promote good solubility. The three polymers with vinylene units ( P1 , P2 , and P4 ) were prepared using the Horner–Wadsworth–Emmons reaction. For the synthesis of the arylene‐ethynylene polymer P3, the palladium‐catalyzed Sonogashira cross‐coupling reaction was used. The polymers were characterized by NMR, Fourier transform infrared spectroscopy, and Raman spectroscopy. Photophysical, absorption and photoluminescence, and electrochemical properties were studied. Spectroscopic ellipsometry measurements were performed to gain more insight on the optical properties. In addition, the transport properties were investigated using admittance spectroscopy. The bulk hole mobility and its dependence on the electric field were evaluated for P1 and P2 . © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 129–143     

Hydrogels based on schiff base formation between an amino‐containing polyphosphazene and aldehyde functionalized‐dextrans

Hydrogels generated by the interaction of two different water‐soluble polymers offer access to a new group of soft materials. A prototype amino‐functionalized polyphosphazene with both tyramine and ferulic acid‐based side groups was coupled to aldehyde functionalized‐dextrans to form hydrogels crosslinked via Schiff base chemistry. Synthesis of the polyphosphazene was accomplished by macromolecular substitution and protection‐deprotection chemistry, with characterization by ¹H NMR, ³¹P NMR, solid state ¹³C NMR, and DSC techniques. Combination of the aqueous polyphosphazene and aldehyde functionalized‐dextran solutions at room temperature caused gelation with different gelation times and crosslink densities dependent on the aldehyde content of the dextran. The hydrogel properties were evaluated using rheology, thermal characterization, and cryo‐microscopy. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2984–2991     

Thermoresponsive poly(ionic liquid): Controllable RAFT synthesis,thermoresponse, and application in dispersion RAFT polymerization

The thermoresponsive poly(ionic liquid) of poly[1‐(4‐vinylbenzyl)‐3‐methylimidozolium tetrafluoroborate] trithiocarbonate (P[VBMI][BF₄]‐TTC) showing the soluble‐to‐insoluble phase transition in the methanol/water mixture at the upper critical solution temperature (UCST) was synthesized by solution RAFT polymerization and the synthesized P[VBMI][BF₄]‐TTC was employed as macro‐RAFT agent to mediate the RAFT polymerization under dispersion condition to afford the thermoresponsive diblock copolymer nanoparticles of poly[1‐(4‐vinylbenzyl)‐3‐methylimidozolium tetrafluoroborate]‐b‐polystyrene (P[VBMI][BF₄]‐b‐PS). The controllable solution RAFT polymerization was achieved as indicated by the linearly increasing polymer molecular weight with the monomer conversion and the narrow molecular weight distribution. The P[VBMI][BF₄]‐TTC macro‐RAFT agent mediated dispersion polymerization afforded the P[VBMI][BF₄]‐b‐PS nanoparticles, the size of which was uncorrelated with the polymerization degree of the P[VBMI][BF₄] block. Several parameters including the polymerization degree, the polymer concentration and the water content in the solvent of the methanol/water mixture were found to be correlated with the UCST of the poly(ionic liquid). The synthesized poly(ionic liquid) is believed to be a new thermos‐responsive polymer and will be useful in material science. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 945–954     

Molecular‐level structures at poly(4‐vinyl pyridine)/acid interfaces probed by nonlinear vibrational spectroscopy

The molecular structures of the interfaces between a solid poly(4‐vinyl pyridine) (P4VP) surface and poly(acrylic acid) (PAA) as well as hydrochloric acid (HCl) solutions were probed using sum frequency generation (SFG) vibrational spectroscopy in situ in real time. Spectroscopic results clearly reveal that the PAA molecules are adsorbed onto the P4VP surface via hydrogen bonding at the P4VP/PAA solution interface while the P4VP surface is protonated at the P4VP/HCl solution interface. Consequently, the water molecules near the interfaces are strongly perturbed by these two interactions, exhibiting different orderings at the two interfaces. This work clearly demonstrates the power of studying the interfacial molecular‐level structures via nonlinear vibrational spectroscopy when molecular adsorption happens at the solid–liquid interface and paves a way for our future study on tracing the adsorption dynamics of polymer chains onto solid surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 848–852     

New benzodithiophene‐ and benzooxadiazole/benzothiadiazole‐based donor–acceptor π‐conjugated polymers for organic photovoltaics

A new set of push‐pull type 2D‐conjugated polymers (P1–P4) were designed and synthesized where A1, A2 (oxygen analogues) and A3, A4 (sulfur analogues) are electron deficient units used as co‐monomers. On introduction of new repeating units into the polymer backbone, significant changes were observed in optoelectronic properties. Furthermore, the heteroatom exchange in new repeating units has also brought notable changes in photophysical properties, in particular P1 and P2 (oxygen analogues) showed bathochromic shift in UV‐vis absorption spectra and deeper HOMO energy levels than P3, P4 (sulfur analogues). Interestingly P1, P3 absorption spectra shows a vibronic shoulder (659, 652 nm) peak in lower energy region, and this might originated from non‐covalent interactions between the electron rich and electron deficient units. In addition, the systematic investigation of these polymers with additive and solvent treatment, yielded in enhanced power conversion efficiency of 4.29% for P3‐based devices in bulk heterojunction organic solar cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2668–2679     

Vinyl phenylboronic acid controlling co‐monomer for nitroxide mediated synthesis of thermoresponsive poly(2‐N morpholinoethyl methacrylate)

Low concentrations of 4‐vinylphenylboronic acid (VPBA) were copolymerized with 2‐N‐morpholinoethyl methacrylate (MEMA) by nitroxide mediated polymerization using BlocBuilder? unimolecular initiator at 80 to 90 °C. The MEMA/VPBA copolymerizations were performed at initial feed compositions (f_VPBA,0) of 0.05 to 0.10 VPBA, with f_VPBA,0 = 0.10 using dimethylacetamide (DMAc) solvent being most effective, as seen by a linear increase in number average molecular weight, M_n, versus conversion and low dispersity, ? < 1.40. The copolymers were further chain‐extended with a second batch of VPBA, resulting in a block copolymer with monomodal molecular weight distribution and ? = 1.66. For MEMA/VPBA copolymers, increases in VPBA composition and polymer solution concentration resulted in decreases in the cloud point temperature (CPT, typically varied between 27.4–37.8 °C) and CPT increased from 31.2 to 33.8 °C to about 88 °C with decreases in pH from 7 to 4. Rheological tests with small angle light scattering (SALS) confirmed CPTs measured by UV‐Vis and DLS. These copolymers were targeted as models to combine possible glucose‐sensing boronic acid functionality the thermoresponsiveness provided by MEMA groups. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1560–1572     

Random styrenic copolymers with pendant pyrene moieties: Synthesis and applications in organic field‐effect transistor memory

Three random copolymers comprised pendant styrene and 4‐(1‐pyrenyl)‐styrene (PyS) moieties in different molar ratios (21.4:1 ( P1 ), 3.9:1 ( P2 ), and 1.4:1 ( P3 )) were synthesized and employed as charge storage polymeric electret for nonvolatile organic field‐effect transistor (OFET) memory application. The impact of varying the molar ratio in side‐chain electron‐donating pyrene moieties on the thermal, optical, photophysical, electrochemical, and electrical properties of the resulting pendant copolymers was evaluated to establish structure–property relationship. The OFET memory with P3 electret layer exhibits a largest memory window of 41.8 V, long retention time of 10⁴ s with memory ratio of 10⁵, and stable reversibility of at least 100 cycles due to enhanced field‐induced holes trapping ability from higher PyS composition ratio. Therefore, polymer electret with pendant functional moieties shows potential for use as trapping layer in OFET memory devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 910–917     

Synthesis and thermoresponsive properties of OEGylated polypeptide with a LCST at body temperature in water and with a UCST in alcohol or ethanol/water solvent mixture

Thermoresponsive polypeptides bearing oligo(ethylene glycol) (OEG) pendants (i.e., P1‐OEG_x and P2‐OEG_x, x = 3, 7) were synthesized by copper‐mediated 1,3‐dipolar cycloaddition with high grafting efficiency (≥97%) between side‐chain “clickable” polypeptides, namely poly(γ‐4‐(propargoxycarbonyl)benzyl‐l ‐glutamate) (P1) or poly(γ‐4‐(4‐propargoxyphenoxycarbonyl)benzyl‐l ‐glutamate) (P2) and azido functionalized OEG (N₃‐OEG_x). P1 and P2 with similar degree of polymerization (DP = 35 or 37) were prepared from triethylamine initiated ring‐opening polymerization of respective N‐carboxyanhydrides. P1‐OEG_x (x = 3, 7) and P2‐OEG₇ showed reversible UCST‐type phase transitions in various alcoholic solvents (e.g., ethanol, propanol, n‐butanol, and n‐pentanol). P2‐OEG₃ also showed reversible UCST‐type phase transitions in ethanol/water solvent mixtures at the weight percentage of ethanol no less than 50 wt %. P1‐OEG₇ and P2‐OEG₇ showed reversible LCST‐type phase transitions in aqueous solutions. Variable‐temperature UV–vis spectroscopy revealed that the LCST‐type phase transition temperature (T_pt) of P2‐OEG₇ with benzoic acid phenyl ester linkages was at around body temperature and it was barely changed with the variation of polymer concentration, yet it showed noticeable dependence on the nature of salt (i.e., NaCl, NaBr, NaI, or KCl) and salt concentration in the range of 0–300 mM. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 163–173     

Synthesis and characterization of “Living” star‐shaped poly(N‐vinylcaprolactam) with four arms and carboxylic acid end groups

Poly(N‐vinylcaprolactam) (PNVCL) star‐shaped polymers with four arms and carboxyl end groups were synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization of N‐vinylcaprolactam (NVCL) employing a tetrafunctional trithiocarbonate as an R‐RAFT agent. The resulting star polymers were characterized using ¹H NMR, FT‐IR, gel permeation chromatography (GPC), and UV–vis. Molecular weight of star polymers were analyzed by GPC and UV–vis being observed that the values obtained were very similar. Furthermore, the thermosensitive behavior of the star polymers was studied in aqueous solution by measuring the lower critical solution temperature by dynamic light scattering. Star‐shaped PNVCL were chain extended with ethyl‐hexyl acrylate (EHA) to yield star PNVCL‐b‐PEHA copolymers with an EHA molar content between 4% and 6% proving the living character of the star‐shaped macroCTA. These star block copolymers form aggregates in aqueous solutions with a hydrodynamic diameter ranged from 170 to 225 nm. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2156–2165     

Polymer cyclization inhibits thermal decomposition of carbon‐dioxide‐derived poly(propylene carbonate)s

Remarkable enhancement of CO₂‐derived poly(propylene carbonate) (PPC) against thermal decomposition was achieved by cyclization of linear PPCs. Thus, a CO₂‐derived linear vinyl‐telechelic PPC was synthesized by CO₂–propylene oxide alternating copolymerization initiated from H₂O followed by an end‐capping esterification with 4‐pentenoic acid. Cyclic PPC was synthesized by the end‐to‐end intramolecular reaction of the vinyl‐telechelic linear PPC by metathesis condensation. Comparison of the thermal decomposition temperature (T_d) with linear and cyclic PPCs confirms surprisingly enhanced T_ds of cyclic PPCs. The elimination of chain ends through cyclization is indeed valuable for enhancing T_d of CO₂‐derived PPCs and thus turn the spotlight on the materials design utilizing CO₂. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3336–3342     

Hydrophobically controlled self‐association of pH‐ and thermo‐sensitive triblock copolymers based on poly(acrylic acid‐co‐tert‐butyl acrylate) and poly(propylene oxide)

Aqueous solution properties of amphiphilic P(AA‐co‐tBA)‐b‐PPO‐b‐ P(AA‐co‐tBA) copolymers having various tBA contents are presented in this article. These copolymers show pH‐sensitive behavior depending on tBA/AA ratio. Hydrophobic interactions between tBA units leading to pH‐dependent macroscopic aggregates were evidenced by turbidimetry. The aggregation behavior of the PPO middle block was concealed in presence of tBA units. The formation of water‐soluble aggregated objects was characterized by Asymmetrical Flow Field Flow Fractionation (AsF4). By increasing tBA/AA ratio, we observed an increase of aggregates size as well as a reduction of the critical concentration aggregation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1944–1949     

High fluorescent ethyl acrylate modified PEDOT‐MeNH2 with enhanced electrochromic performance

Two poly(2'‐aminomethyl‐3,4‐ethylenedioxythienylene) (PEDOT‐MeNH₂) derivatives were successfully synthesized by electrochemical polymerization of precursors, diethyl 3'‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl) methyl)azanediyl)dipropanoate ( monomer 1 ) and ethyl 3‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl) methyl)amino)propanoate ( monomer 2 ), respectively. Structure–property relationships of monomers and polymers, including electrochemical, optical properties, and morphology, were systematically explored. Significantly, the designed polymers exhibited red and orange emission signatures with high fluorescence quantum yields (Φ_F) of 0.044 and 0.045 compared with those of monomers; they may be used as building blocks for rational design of fluorescent materials. Moreover, cyclic voltammetry and spectroelectrochemistry studies demonstrated that poly(diethyl 3'‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl)azanediyl) dipropanoate) ( P1 ) and poly(ethyl 3‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl)amino) propanoate) ( P2 ) can be reversibly oxidized and reduced accompanied by obvious color changes from light purple to light blue for P1 , and from purple to blue for P2 . Furthermore, both P1 and P2 displayed higher optical contrasts (40–70%) in the visible region, favorable coloration efficiency (typically 50–230 cm² C^?1). From these results, the two polymers would be promising candidate materials for display applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2081–2091     

Synthesis of pH‐ and thermoresponsive poly(2‐n‐propyl‐2‐oxazoline) based copolymers

Polymers that possess lower critical solution temperature behavior such as poly(2‐alkyl‐2‐oxazoline)s (PAOx) are interesting for their application as stimulus‐responsive materials, for example in the biomedical field. In this work, we discuss the scalable and controlled synthesis of a library of pH‐ and temperature‐sensitive 2‐n‐propyl‐2‐oxazoline P(nPropOx) based copolymers containing amine and carboxylic acid functionalized side chains by cationic ring opening polymerization and postpolymerization functionalization strategies. Using turbidimetry, we found that the cloud point temperature (CP) is strongly dependent on both the polymer concentration and the polymer charge (as a function of pH). Furthermore, we observed that the CP decreased with increasing salt concentration, whereas the CP increased linearly with increasing amount of carboxylic acid groups. Finally, turbidimetry studies in PBS‐buffer indicate that CPs of these polymers are close to body temperature at biologically relevant polymer concentrations, which demonstrates the potential of P(nPropOx) as stimulus‐responsive polymeric systems in, for example, drug delivery applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1573–1582