以纯硅silicalite-1为晶种制备空心结构ZSM-5沸石分子筛

微孔分子筛在实际应用过程中常常受到扩散限制的影响,分子筛内部的利用率不高;制备空心结构分子筛对于改善分子筛扩散传质、提高分子筛利用率具有重要意义。以纯硅silicalite-1为晶种,以四丙基氢氧化铵(TPAOH)为结构导向剂制备ZSM-5分子筛;无定型硅铝物种首先在晶种表面晶化生长,同时碱性合成体系的碱度则可以溶解不稳定的silicalite-1晶种,通过控制调变生长与溶解的相对速率制备得到具有空心结构的ZSM-5分子筛;该多级孔道ZSM-5分子筛的制备方法简单、易操作,具有广泛的应用潜力。     

ZSM-5分子筛膜的研究进展

本文分析了ZSM-5分子筛膜的主要合成方法和研究现状,总结了ZSM-5分子筛膜的缺陷与修饰方法,指出了ZSM-5分子筛膜的表征手段是以XRD、SEM、TEM和单组分气体渗透等为主,对ZSM-5分子筛膜的应用和前景进行了展望.     

低成本原料一步直接合成小晶粒ZSM-5分子筛

以硫酸铝、水玻璃、正丁胺、水、晶种、NaCl、浓硫酸等低成本试剂为原料,一步直接合成法制备了高结晶度小晶粒ZSM-5分子筛,详细考察了凝胶陈化方式、滴加顺序、晶化时间、晶化温度、水量及原料硅铝比对分子筛结晶度及粒度的影响.通过XRD、SEM等对合成的分子筛进行了详细表征.研究结果表明:采用低温水浴回流搅拌陈化方式、在160～170℃、晶化30 h可获得高结晶度小晶粒ZSM-5分子筛.正反加顺序对分子筛结晶度影响不大.     

ZSM-5分子筛膜的研究进展

本文分析了ZSM-5分子筛膜的主要合成方法和研究现状,总结了ZSM-5分子筛膜的缺陷与修饰方法,指出了ZSM-5分子筛膜的表征手段是以XRD、SEM、TEM和单组分气体渗透等为主,对ZSM-5分子筛膜的应用和前景进行了展望。     

ZSM-5分子筛膜的研究进展

本文分析了ZSM-5分子筛膜的主要合成方法和研究现状，总结了ZSM-5分子筛膜的缺陷与修饰方法，指出了ZSM-5分子筛膜的表征手段是以XRD、SEM、TEM和单组分气体渗透等为主，对ZSM-5分子筛膜的应用和前景进行了展望。     

ZSM-5、ZSM-57分子筛和丝光沸石间的转晶规律

考察了硅铝比、碱度、有机胺模板剂、晶化时间及温度等合成条件对ZSM-5、ZSM-57 分子筛和丝光沸石之间相互转晶的影响. 发现较高的碱度、较长的晶化时间有利于合成丝光沸石；较低的碱度、较高的诱导晶化温度、较长的晶化时间有利于合成低硅铝比的ZSM-57 分子筛；合成低硅铝比的ZSM-5分子筛则需要在能合成丝光沸石和ZSM-57 分子筛的碱度区间内精确调节碱度, 缩短晶化时间、降低诱导晶化温度、加入适当晶种, 有利于合成低硅铝比的ZSM-5 分子筛. 合成条件稍微改变, 会导致各种沸石之间发生转晶, 晶化产物出现两种或两种以上的晶型.     

ZSM-5分子筛结晶度及晶粒大小的影响因素

以硅溶胶为硅源,偏铝酸钠为铝源,用晶种法制备ZSM-5分子筛.考察了物料混合方式、陈化时间、晶化时间、晶化温度、碱度和水量等对ZSM-5分子筛相对结晶度和晶粒大小的影响.用X射线衍射仪(XRD)、扫描电子显微镜(SEM)和激光粒度分析等对所合成样品进行了表征.结果表明:在一定的高碱度条件下形成高浓度的硅铝酸盐凝胶,才能合成出晶化良好的样品,ZSM-5分子筛是按固相机理形成的;合成ZSM-5分子筛的相对结晶度和平均颗粒度均随晶化温度的升高及硅铝酸盐凝胶浓度的增加而增大,在室温陈化24 h、180℃晶化12～24 h时相对结晶度最高,平均颗粒度基本上与陈化时间无关.     

多级孔ZSM-5分子筛的制备及其在炼油领域中的应用

多级孔ZSM-5分子筛结合了微孔分子筛可调变的酸性、良好的水热稳定性以及介孔材料优异的传质扩散性能,在催化领域有着广阔的应用前景.我们综述了近年来多级孔ZSM-5分子筛的研究进展,重点概述了多级孔ZSM-5分子筛的不同制备方法,包括后处理法、硬模板法和软模板法等,同时介绍了多级孔ZSM-5分子筛在炼油领域的应用研究,并在上述基础上对多级孔ZSM-5分子筛的研究趋势进行了展望.     

高效ZSM-5-L二元复合分子筛的合成及正戊烷芳构化性能

通过优化水热陈化条件制备纳米L沸石,再采用水热合成结合原位二次晶化法,合成具有微-介复合孔结构的高效ZSM-5-L二元复合分子筛.考察了体系pH、二次晶化温度等因素对ZSM-5-L复合分子筛合成的影响,采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和傅里叶变换红外光谱(FTIR)等技术对复合分子筛进行表征,确定了最佳复合条件:pH=10.5~11.5,晶化温度170℃,晶化时间24 h.ZSM-5-L复合分子筛具有不同于ZSM-5沸石、L沸石及两者机械混合物的物性特征,且具有微-介复合孔结构.以正戊烷催化转化为探针反应,评价了ZSM-5-L复合分子筛轻烃芳构化反应性能.在相同反应条件下,ZSM-5-L复合分子筛具有优于2种单分子筛及二者机械混合物的正戊烷芳构化催化性能.     

以天然矿物为全部硅铝源低成本绿色合成ZSM-5分子筛的研究

ZSM-5分子筛被广泛地应用于催化、吸附分离、离子交换和绿色化工等领域,但目前其合成主要是以无机化学品为硅铝源,从源头来看是非绿色化的过程.我们以热活化的硅藻土和亚熔盐活化的累托土为全部硅铝源,通过调变两种矿物的加入比例调变合成体系的硅铝比,在水热合成体系中制备ZSM-5分子筛.系统地考察模板剂用量、碱度、投料硅铝比、晶化时间等合成条件对产物结构和性质的影响,并对在最优条件下合成的ZSM-5分子筛的物化性质进行了详细地表征,结果表明：以天然矿物为全部硅铝源可以合成出具有较高结晶度、晶粒尺寸约为4 μm的六面体挛晶形貌的ZSM-5分子筛,该分子筛比商业ZSM-5分子筛具有更高的水热稳定性和更优的加氢异构性能.     

Microwave synthesis of zeolite membranes: A review

Significant progress has been achieved in the last years on microwave synthesis of zeolite membranes. In many cases, microwave synthesis has proven to remarkably reduce the synthesis time. In addition, microwave synthesis could also result in different membrane morphology, orientation, composition, and thus the different permeation characteristics as compared with those synthesized by conventional heating. This review attempts to summarize the obtained progress in microwave synthesis of zeolite membranes. Some topics are discussed, including: (1) case study of microwave synthesis of zeolite membranes, e.g. LTA, MFI, AFI, and other types of zeolite membranes; (2) differences between conventional and microwave synthesis; (3) formation mechanism and the so called “specific microwave effect” in the case of microwave synthesis of zeolite membranes; (4) scaling-up of zeolite membrane production by employing microwave heating. The latter three topics are mainly focused on LTA type zeolite membranes. Concluding remarks and future perspective are also suggested in the end.     

Copper-exchanged LTA zeolite membranes with enhanced water flux for ethanol dehydration

Phase-pure and well-intergrown Cu-LTA membranes are developed through copper ions exchange of sodium ions in Na-LTA framework. For pervaporation of 90.0 wt% ethanol/10.0 wt% water mixtures, the Cu-LTA membrane shows much higher water flux than Na-LTA membranes due to the enhancement of the pore size after ions exchange.     

含硼MFI型分子筛膜制备与渗透汽化性能研究

采用二次生长法在廉价的多孔莫来石管状支撑体上合成了含硼MFI(B-MFI)分子筛膜。通过XRD、FTIR、ICP-AES、11BMAS NMR和SEM对形成膜和粉末进行表征,并考察了溶胶nB/nSiO2比、料液温度和浓度对分子筛膜渗透汽化性能的影响。表征结果证实BO4存在于MFI晶体骨架中。溶胶nB/nSiO2比对膜层微结构和渗透汽化性能有较大影响。B-MFI型分子筛膜选择性地从水溶液中透过有机物,在60℃、质量分数5%丙酮/水和乙醇/水体系的分离因子分别为260和70,均高于同等条件下制备的silicalite-1分子筛膜。     

Improving the Gas-Separation Properties of PVAc-Zeolite 4A Mixed-Matrix Membranes through Nano-Sizing and Silanation of the Zeolite

Mixed-matrix membranes containing synthesised nano-sized zeolite 4A and PVAc were fabricated to investigate the effect of zeolite loading on membrane morphology, polymer-filler interaction, thermal stability and gas separation properties. SEM studies revealed that, although the membranes with 40 wt % nano-sized zeolite particles were distributed uniformly through the polymer matrix without voids, the membranes with 15 wt % zeolite loading showed agglomeration. With increasing zeolite content, the thermal stability improved, the permeability decreased and the selectivity increased. The effect of silanation on dispersion of 15 wt % zeolite 4A nanoparticles through PVAc was investigated by post-synthesis modification of the zeolite with 3-Aminopropyl(diethoxy)methylsilane. Modification of the nanoparticles improved their dispersion in PVAc, resulting in higher thermal stability than the corresponding unmodified zeolite membrane. Modification also decreased the rigidity of the membrane. Partial pore blockage of the modified zeolite nanoparticles after silanation caused a further decrease in permeability, compared to the 15 wt % unmodified zeolite membrane.     

PREPARATION OF SILICALITE-1 AND ZSM-5 ZEOLITE/ CERAMIC COMPOSITE MEMBRANES

ＰＲＥＰＡＲＡＴＩＯＮＯＦＳＩＬＩＣＡＬＩＴＥ┐１ＡＮＤＺＳＭ┐５ＺＥＯＬＩＴＥ／ＣＥＲＡＭＩＣＣＯＭＰＯＳＩＴＥＭＥＭＢＲＡＮＥＳＺｈａｎｇＬｉｘｉｏｎｇ，ＪｉａＭｅｎｇｄｏｎｇ，ＭｉｎＥｎｚｅ（ＲｅｓｅａｒｃｈＩｎｓｔｉｔｕｔｅｏｆＰｅｔｒｏｌｅ...     

NaA型分子筛膜的合成及分离性能的研究

在自制的片状多孔陶瓷载体上,通过多次原位水热晶化合成出ＮａＡ型分子筛膜,通过扫描电子显微镜观测,发现在某些区域,小颗粒的ＮａＡ型分子筛以非常紧密的形式畸晶孪生在一起,其致密度远好于由分子筛晶粒松散无规律堆积而形成的膜排列经类膜生长形式可能是获得取致密无缺陷型分子筛膜的一种途径,单组分及双组分气体渗透测试结果表明,在所合成的分子筛膜上,晶粒间隙孔可能是主要的膜扩散通道,可凝聚气体异丁烷因发生毛细管凝     

Zeolite Membranes: From the Laboratory Scale to Technical Applications

Current trends and novel concepts in R&D of zeolite membranes like the seeding supported crystallization and the preparation of Al-containing zeolite membranes are discussed. The influences of adsorption and diffusion on the permeation properties of zeolite membranes are considered. Dehydration of ethanol by steam permeation and pervaporation as the first zeolite membrane based industrial separation is presented. Membrane supported dehydrogenation and esterification are discussed as possible applications of a catalytic membrane reactors. In memoriam Wolfgang Schirmer.     

高硅ZSM—5沸石填充硅橡胶膜的醇—水渗透蒸发分离性质

高硅ZSM－5沸石填充疏水性硅橡胶蓦地低浓度醇－水体度醇－水体的渗透蒸发性质的研究有明，提高沸石硅铝比，增加填充量以及进行酸处理皆有利于改善膜对醇－水的分离系数和通量。料液的成，浓度以及温度对膜的分离性质也有显著影响。     

澄清溶液中NaA型分子筛膜的合成及气体渗透性能

The use of zeolite membranes in separation or combined reaction and separation processes is very attractive. Advantages of using such a type of membranes include their ability to discriminate molecules based on the molecular size and their stability[1]. In the past ten years, most efforts were involved in the synthesis and permeation studies of MFI zeolite membrane[2, 3]. Recently, NaA zeolite membrane has attracted much attention because of its high potential in the dehydration of organic liquids[4]. However, few gas permeation results were reported[5]. Furthermore, most of the NaA zeolite membrane was synthesized from gel[4]. In this letter, the synthesis of NaA zeolite membrane from clear solution and its gas permeation properties are reported.