Cu-Co bi-metal catalyst prepared by perovskite CuO/LaCoO3 used for higher alcohol synthesis from syngas

Cu-Co bi-metal catalysts derived from CuO/LaCoO3 perovskite structure were prepared by one-step citrate complexing method, and the structure evolution reaction from CuO/LaCoO3 to Cu-Co2C/La202CO3 under 1-12 pretreatment was investigated by techniques of XRD, TPR and TEM. The results suggest that a much higher dispersion of copper significantly enhanced the reduction of cobalt, and a stronger interaction between copper and cobalt ions in LaCoO3 particles led to the formation of bi-metallic Cu-Co particles in the reduced catalysts and the enrichment of Co on the surface of bimetallic particles. The prepared catalysts were highly active and selective for the alcohol synthesis from syngas due to the presence of copper-modified C02C species.     

A novel solid-gas process to synthesize LaMnO3 perovskite with high surface area and excellent activity for methane combustion

A novel solid-gas route to prepare LaMnO3 perovskite catalysts for methane combustion has been developed. The method was carried out using a polyvinylpyrrolidone-metal complex as precursor via a solid-gas process to obtain the target materials. The structure and properties of the precursor and the catalysts were characterized by FT-IR, TG-DSC, XRD and N2 adsorption-desorption techniques. The results indicate that the catalysts synthesized via the solid-gas process possess higher surface areas, better thermal resistance and catalytic activity as compared to those prepared with the conventional sol-gel citrate method.     

Preparation and characterization of Mn/MgAlFe as transfer catalyst for SOx abatement

A series of manganese-promoted MgAlFe mixed oxides, used as sulfur transfer catalysts, were prepared by acid-processed gelatin method and characterized by TGA-DTA, XRD, N2 adsorption-desorption and FT-IR techniques. It was found that the sulfur transfer catalysts with 0.5?3.0 wt% manganese showed its good dispersion in the precursor. The novel Mn/MgAlFe catalysts with 0.5?5.0 wt% manganese oxide showed a high oxidative adsorption rate and sulfur adsorption capacity, and 5.0 wt% Mn/MgAlFe sample was superior to the others for SO2 removal. Moreover, the presence of CO had no obvious effect on the adsorption activity of sulfur transfer catalysts for SO2 uptake.     

CH4 reforming with CO2 for syngas production over La2O3 promoted Ni catalysts supported on mesoporous nanostructured γ-A12O3

Nanostructured -y-A12O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N2 adsorption-desorption, TPR, TPO, TPH, NH3-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m2.g-1 and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and Oxide to drv reformin feed increased the methane conversion and led to carbon free ooeration in combined orocesses.     

CH_4 reforming with CO_2 for syngas production over La_2O_3 promoted Ni catalysts supported on mesoporous nanostructured γ-Al_2O_3

Nanostructured γ-Al2O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N2adsorption-desorption,TPR, TPO, TPH, NH3-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m2 g-1and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and O2 to dry reforming feed increased the methane conversion and led to carbon free operation in combined processes.     

TiO2 supported cobalt-manganese nano catalysts for light olefins production from syngas

Cobalt-manganese nano catalysts were prepared by sol-gel method. This research investigated the effects of different cobalt-manganese (Co/Mn = 1/1) loading, pH and calcination conditions on the catalytic performance of Co-Mn/TiO2 catalysts for Fischer-Tropsch synthesis (FTS) in a fixed bed reactor. It was found that the catalyst containing 30wt%(Co-Mn)/TiO2 was an optimal catalyst for the conversion of synthesis gas to light olefins especially propylene. The activity and selectivity of optimal catalyst were studied under different operational conditions. The results showed that the best operational conditions were H2 /CO = 1/1 molar feed ratio at 250℃ and GHSV = 1300 h-1 under atmospheric pressure. Characterization of catalysts was carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N2 adsorption-desorption measurements.     

Oxidative dehydrogenation of propane over Ni-Mo-Mg-O catalysts

In this work, a series of Ni-Mo-Mg-O catalysts with mesoporous structure prepared by sol-gel method were investigated for the oxidative dehydrogenation of propane (ODHP). The techniques of temperature-programmed reduction with H2 (H2-TPR), N2 adsorption-desorption, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and X-ray photoelectron spectra (XPS) were employed for catalyst characterization. It is found that the activity of the catalysts for ODHP increases first and then decreases with the increase of Mo content. The catalyst with a Mo/Ni atomic ratio of 1/1 exhibits the best catalytic activity, which gives the propene selectivity of 81.4% at a propane conversion of 11.3% under 600°C and maintains the good catalytic performance for 22 h on stream. This is related not only to its high reducibility and dispersion as revealed by TPR and XRD, but also to the formation of more selective oxygen species on the MoOx-NiO interface as identified by XPS.     

Dehydrocyclization of Diphenylamine to Carbazole over Platinum-Based Bimetallic Catalysts

 Gas phase dehydrocyclization of diphenylamine (DPA) to carbazole over monometallic and bimetallic 0.4 wt% Pt-based catalysts in a fixed bed reactor was studied in the presence of hydrogen at a temperature of 550 ^oC. Alumina and carbon supported Pt catalysts showed very high initial activity (> 95%). The selectivity for carbazole over carbon supported Pt catalysts was slightly lower. Doping of the catalyst with potassium led to an increase in the selectivity for carbazole by 15%. Bimetallic Pt-Sn catalysts prepared by co-impregnation were less selective than catalysts prepared by successive impregnation. The selectivity for carbazole over bimetallic Pt-Sn catalysts prepared by successive impregnation was 75%, but their activity decreased with increased Sn loading. Highly active and reasonably selective catalysts were Ir-doped bimetallic Pt-based catalysts. The conversion of diphenylamine over Pt-Ir catalysts was above 98% and the selectivity for carbazole was nearly 55%, while the lifetime was much longer.     

Multi-walled carbon nanotubes as a ligand in nickel α-diimine based ethylene polymerization

Two novel heterogeneous nickel ?-diimine based polymerization catalysts, containing MWCNT as the main ligand, were synthesized by novel in situ catalyst preparation technique. The in situ synthesis was performed by covalent attachment of the acenaphthenic ligand core to amine functionalized MWCNT ligand arms through diimine bonding and further nickel dibromide chelation. The prepared catalysts were fully characterized and their structures and supporting efficiencies were determined. Single or double introduction of the MWCNTs through their ends or sidewall(s) in the catalytic system, as a ligand, influenced the catalytic performance, microstructure and morphology of obtained polyethylenes. MWCNT sidewall bonding to para-aryl position of the tetramethylphenyl moiety performed as more electron-donating ligand than MWCNT ends linked to the imine bond and protected the catalytic system to retain its activity. This character resulted in the maintenance of the resulting polymer topology at elevated temperatures so that the catalytic activity and the obtained polymer melting points remained around 110 g PE?mmol?1 Ni?h?1 and 123 ℃ in all polymerization temperatures respectively. In polymerization trials, molecular weight fall against temperature was not as sharp as what had been observed in sequentially prepared catalysts insofar as the molecular weight of resultant polymer at 60 ℃ reached to 310000 g?mol?1 which was close to the highest value had been reported at 30 ℃ for sequentially prepared catalysts. TEM observations showed the presence of the stopped-growth polymer chains due to geometrical constrains or ligand debonding for both catalytic systems.     

Cobalt supported on CNTs-covered γ-and nano-structured alumina catalysts utilized for wax selective Fischer-Tropsch synthesis

Cobalt supported on carbon nanotubes(CNTs)-covered alumina has been recently developed and successfully utilized as a catalyst in Fischer-Tropsch synthesis(FTS).Problems associated with shaping of Co/CNTs into extrudates or pellets as well as catalyst attrition rendered these materials unfavorable for industrial applications.In this investigation regularγ-and nano-structured(N-S)alumina as well as CNTs-covered regularγ-and N-S-alumina supports were impregnated by cobalt nitrate solution to make new cobalt-based catalysts which were also promoted by Ru.The catalysts were characterized and tested in a micro reactor to evaluate their applicability in FTS.γ-Al2O3 was prepared by calcination of bohemite and N-S-Al2O3 was prepared by sol-gel method using aluminum chloride as starting material.Catalyst evaluations indicated that N-S-Al2O3 was superior to regularγ-Al2O3 and that CNTs-covered alumina supports were favored over non-covered ones in terms of activity and heavy hydrocarbon selectivity.These were justified by porosimetric characteristics of the catalysts and existence of CNTs points of view. CNTs-covered catalysts also showed higher wax selectivity and better resistance to deactivation.Furthermore,TPR analysis indicated that the cobalt aluminate phase,which is responsible for the permanent deactivation of alumina supported Co-based catalysts,did not form on alumina supported Co-based catalysts covered with CNTs due to weaker interactions between cobalt and alumina.     

Methane reforming With CO2 to syngas over CeO2-promoted Ni/Al2O3-ZrO2 catalysts Prepared Via a direct sol-gel process

CeO2-promoted Ni/Al2O3-ZrO2 (Ni/Al2O3-ZrO2-CeO2) catalysts were prepared by a direct sol-gel process with citric acid as gelling agent. The catalysts used for the methane reforming with CO2 was studied by infrared spectroscopy (IR), thermal gravimetric analysis (TGA), microscopic analysis, X-ray diffraction (XRD) and temperature-programmed reduction (TPR). The catalytic performance for CO2 reforming of methane to synthesis gas was investigated in a continuous-flow micro-reactor under atmospheric pressure. TGA, IR, XRD and microscopic analysis show that the catalysts prepared by the direct sol-gel process consist of Ni particles with a nanostructure of around 5 nm and an amorphous-phase composite oxide support. There exists a chemical interaction between metallic Ni particles and supports, which makes metallic Ni well dispersed, highly active and stable. The addition of CeO2 effectively improves the dispersion and the stability of Ni particles of the prepared catalysts, and enhances the adsorption of CO2 on the surface of catalysts. The catalytic tests for methane reforming with CO2 to synthesis gas show that the Ni/Al2O3-ZrO2-CeO2 catalysts show excellent activity and stability compared with the Ni/Al2O3 catalyst. The excellent catalytic activity and stability of the Ni/Al2O3-ZrO2-CeO2 are attributed to the highly, uniformly and stably dispersed small metallic Ni particles, the high reducibility of the Ni oxides and the interaction between metallic Ni particles and the composite oxide supports.     

Effects of impregnation sequence on the microstructure and performances of Cu-Co based catalysts for the synthesis of higher alcohols

Silica-supported CuCo catalysts were prepared by impregnation method with different impregnation sequence for higher alcohols synthesis. These catalysts were characterized by H2-TPR, XRD, N2 adsorption, XPS techniques and CO selective hydrogenation reaction measurement. The effects of impregnation sequence on the structure and performance of catalysts were investigated, and there were important influences on the selectivity to higher alcohols. There was a strong synergistic effect between copper and cobalt for the co-impregnated sample. The CuCo/SiO2 catalyst prepared by co- impregnation showed a better yield of total alcohols, and a higher selectivity to total alcohols which reached 51.5%.     

Dimethylether production on zeolite catalysts activated by Cl-, F- and/or ultrasonication

The chlorinated and fluorinated zeolite catalysts were prepared by the impregnation of zeolites( H-ZSM-5,H-MOR or H-Y) using two halogen precursors( ammonium chloride and ammonium fluoride) in this study. The influence of ultrasonic irradiation was evaluated for optimizing both halogen precursors for production of dimethylether( DME) via methanol dehydration in a fixed bed reactor. The catalysts were characterized by SEM,XRD,BET and NH3-TPD. The reaction conditions were temperatures from 100 to 300 ℃ and a WHSV = 15. 9 h-1. All halogenated catalysts showhigher catalytic activities at all reaction temperatures studied. However, the halogenated zeolite catalysts prepared under ultrasonic irradiation showhigher performance for DME formation. The chlorinated zeolite catalysts show higher activity and selectivity for DME production than the respective fluorinated versions.     

PREPARATION AND CHARACTERIZATION OF BIMETALLIC Pd-Fe/Al_2O_3 CATALYSTS—CHARACTERIZATION BY INFRARED SPECTROSCOPY AND X-RAY DIFFRACTION

Series of bimetallic catalysts Pd-Fe/Al_2O_3 with various palladiumand iron contents were prepared by impregnating metal precursors in differentsequences.Techniques were employed to characterize the catalysts,XRD forthe existing form of the supported metals,XPS for the surface metal contentsand chemical states,in silu IR with the aid of CO as a probe molecule for theinfluence of iron amount and adding sequence upon the dispersion and the elec-tronic state of palladium.On the catalyst prepared by coimpregnating,the pal-ladium and iron contents are higher than those prepared by impregnating in dif-ferent sequence,but the ratio of Pd/Fe(in atom)is lower than those on thelatter two.The iron atoms shield the palladium and enhance the dispersity ofpalladium.In the catalyst prepared by first impregnating with iron and thenwith palladium,the iron has a strong ability to disperse palladium and the dis-persity increases with the iron loading.In the catalyst prepared by first dopingwith palladium and then iron,the     

Structure and Properties of Sol—Gel Derived CuNiMnZrO2 Catalysts for CO Hydrogenation

Two CuNiMnZrO2 catalysts (crystallized or non-crystallized) were prepared by co-hydrolyzing zirconium n-propoxide with Cu(NO3)2, Mn(NO3)2 and Ni(NO3)2 in an ethanol solution in the presence of diglycol. The physical and chemical properties of the catalysts were characterized using BET, XRD,TEM, XPS and CO-DRIFT techniques. It was found that the non-crystallizied CuNiMnZrO2 catalyst demonstrated highly dispersed active phases and high activity for CO adsorption, which resulted in good performance for synthesis of higher alcohols in CO hydrogenation compared to crystallized CuNiMnZrO2.     

Heterogeneous Photocatalytic Mineralization of Chlorobenzene by Paratungstate-loaded Titania Catalysts in an Aqueous Medium

Paratungstate-loaded titania catalysts were prepared via the addition of a series of aqueous solutions of paratungstate( denoted as W7 ) into an isopropanol solution of Ti[ OCH( CH3 )2 ]4 by means of the sol-gel method. The catalysts were characterized by EDX, BET, FTIR, UV-Vis DRS, XRD and the results indicate that such paratungstateloaded catalysts maintained their heptatungstate structure in the anatase titania matrix up to 400℃. The catalysts were tested for the heterogeneous photodegradation of chlorobenzene in aqueous media and showed a better catalytic activity than P-25 TiO2 because paratungstate can prevent the recombination of the holes and electrons produced during irradiation. Moreover, the paratungstate-loaded titania catalysts can resist the disaggregation during the photoirradiation and can be easily recycled from the aqueous suspensions after reactions.     

CeO2-ZrO2-La2O3-Al2O3 composite oxide and its supported palladium catalyst for the treatment of exhaust of natural gas engined vehicles

Composite supports CeO2-ZrO2-Al2O3 (CZA) and CeO2-ZrO2-Al2O3-La2O3 (CZALa) were prepared by co-precipitation method. Palladium catalysts were prepared by impregnation and their purification ability for CH4, CO and NOx in the mixture gas simulated the exhaust from natural gas vehicles (NGVs) operated under stoichiometric condition was investigated. The effect of La2O3 on the physicochemical properties of supports and catalysts was characterized by various techniques. The characterizations with X-ray diffraction (XRD) and Raman spectroscopy revealed that the doping of La2O3 restrained effectively the sintering of crystallite particles, maintained the crystallite particles in nanoscale and stabilized the crystal phase after calcination at 1000 ℃. The results of N2-adsorption, H2-temperature-programmed reduction (H2-TPR) and oxygen storage capacity (OSC) measurements indicated that La2O3 improved the textural properties, reducibility and OSC of composite supports. Catalytic activity testing results showed that the catalysts exhibit excellent activities for the simultaneous removal of methane, CO and NOx in the simulated exhaust gas. The catalysts supported on CZALa showed remarkable thermal stability and catalytic activity for the three pollutants, especially for NOx. The prepared palladium catalysts have high ability to remove NOx, CH4 and CO, and they can be used as excellent catalysts for the purification of exhaust from NGVs operated under stoichiometric condition. They also have significant potential in industrial application because of their high performance and low cost.     

Effects of Ce/Zr ratio on the structure and performances of Co-Ce_（1-x）Zr_xO_2 catalysts for carbon dioxide reforming of methane

The Co-incorporated Ce1-xZrxO2 catalysts were prepared by co-precipitation for carbon dioxide reforming of methane. The ratio of Ce to Zr was varied to optimize the performances of co-precipitated Co-Ce-Zr-Ox catalysts. The prepared catalysts were characterized by various physico-chemical characterization techniques including TPR, X-ray diffraction, N2 adsorption at low temperature, XPS and CO2-TPSR. The co-precipitated Co-Ce0.8Zr0.2O2 sample containing 16% CoO exhibited a higher catalytic activity among the five catalysts, and the activity was maintained without significant loss during the reaction for 60 h. Under the conditions of 750 ℃, 0.1 MPa, 36000 ml/(h·g{cat}), and CO2/CH4 molar ratio of 1 : 1, the CO2 conversion over this catalyst was 75% while the CH4 conversion was 67%. The cubic Ce0.8Zr0.2O2 facilitated a higher dispersion and a higher reducibility of the cobalt component, and the apparent activation energy for Co-Ce0.8Zr0.2O2 sample was 49.1 kJ/mol in the CO2/CH4 reforming reaction. As a result, the Co-Ce0.8Zr0.2O2 sample exhibited a higher activity and stability for the reforming of CH4 with CO2.     

Characteristics of La-modified Ni-Al2O3 and Ni-SiO2 catalysts for COx-free hydrogen production by catalytic decomposition of methane

Hydrotalcite precursors of La modified Ni-Al2O3 and Ni-SiO2 catalysts prepared by co-precipitation method and the catalytic activities were examined for the production of COx-free H2 by CH4 decomposition. Physico-chemical characteristics of fresh, reduced and used catalysts were evaluated by XRD, TPR and O2 pulse chemisorptions, TEM and BET-SA techniques. XRD studies showed phases due to hydrotalcite-like precursors in oven dried form produced dispersed NiO species upon calcination in static air above 450 C. Raman spectra of deactivated samples revealed the presence of both ordered and disordered forms of carbon. Ni-La-Al2O3catalyst with a mole ratio of Ni : La : Al = 2 : 0.1 : 0.9 exhibited tremendously high longevity with a hydrogen production rate of 1300 molH2 mol 1 Ni. A direct relationship between Ni metal surface area and hydrogen yields was established.     

Meso-macroporous Al2O3 supported Ru catalysts for CO preferential oxidation in hydrogen-rich gases

Series of meso-macroporous Al2O3 supported Ru catalysts with different loadings were prepared by incipient wetness method and applied to preferential oxidation of CO in hydrogen-rich gases. N2 adsorption-desorption, SEM, XRD, TEM, CO chemisorption and H2 -TPR techniques were employed to characterize the catalysts. The results indicate that Ru/Al2O3 catalysts have meso-macroporous structure, high surface area and high metal dispersion. The characterization results of XRD and CO chemisorption indicate the entry of Ru ions into Al2O3 lattice. The results of catalytic performance tests indicate that the meso-macroporous Al2O3 supported Ru catalysts for CO preferential oxidation showed good activity under high space velocity. It is proposed that the macropores in the Ru/Al2O3 catalyst favor mass transfer and mesopores help to improve the dispersion of metal, resulting in the excellent catalytic performance.