紫外光辐射对TiO2溶胶的影响研究

用紫外-可见吸收光谱、动态光散射与透射电镜研究紫外光辐射对T₂溶胶的影响,结果表明,光辐射使T₂溶胶在可见光区的吸收减少,紫外区吸收增加,吸收带隙增大.与非光辐射的T₂溶胶粒子相比,光辐射使T₂溶胶粒子分布均匀且平均粒径减小,提高了T₂纳米粒子在室温下的晶化程度.     

4-(4-甲氧基苯亚甲基)-2-苯基-5(4H)-噁唑酮纳米带的可控制备及光学特性研究

选取大π共轭体系4-(4-甲氧基苯亚甲基)-2-苯基-5(4H)-噁唑酮作为研究对象,采用再沉淀法制备其纳米晶体,通过研究溶剂、温度、搅拌速度、搅拌时间等因素对所形成的纳米粒子的形貌尺寸的影响,成功制备出了形貌较单一的纳米棒和纳米带结构并进一步考察了它们的紫外吸收和发射光谱,结果表明随着纳米粒子尺寸的增加,其吸收光谱和荧光光谱均出现红移,荧光量子效率随着粒子尺寸的增大略有增大.     

TiO2-CdS-MCM-41复合纳米材料的合成和表征

利用γ-巯丙基三甲氧基硅烷及表面预吸附水解技术在MCM-41介孔分子筛孔道内部以化学键合的形式依次引入了CdS和TiO2纳米粒子.紫外-可见吸收光谱结果表明,借助于巯基的络合能力,MCM-41能有效地从反胶束中萃取CdS纳米粒子.利用小角XRD谱图成功地跟踪观察到了MCM-41介孔分子筛随纳米粒子的引入而产生的孔径变化.     

多形态ZnO纳米粒子的制备及其紫外—可见光吸收性能研究

选用失水山梨醇单油酸酯／反应物水溶液／环己烷制成微乳液等“微反应器”，在其中控制反应，制备出了具有球形及棒状、不规则片状与球形但呈细胞器状排布的纳米氧化锌。用透射电镜（TEM）、动态激光光微射（DLLS）与X－射线衍射对产物的结构、形态、大小与化学成分进行了表征。系统研究了反应体系的组分、配比、反应温度及分散方法等反应条件对“微反应器”与产物形态、大小的影响。探讨了ZnO纳米粒子的稳定性及其原因。并对ZnO纳米粒子的紫外—可见光吸收性能进行了表征。     

牛血红蛋白与银纳米粒子相互作用的光谱研究

运用紫外-可见吸收光谱(UV-Vis)、荧光光谱、同步荧光光谱、圆二色光谱(CD)及傅立叶变换红外光谱(FTIR)等手段, 研究牛血红蛋白(Bovine Hemoglobin, 简称BHb)与银纳米粒子的相互作用. 结果表明, BHb能吸附在银纳米粒子的表面, 使其415 nm处的特征等离子体共振吸收峰强度下降, 峰位红移. 随银纳米粒子的浓度增大, BHb分子中Soret带的吸收持续降低, 说明银纳米粒子可能使部分血红素辅基从它们的键腔中脱离出来. Stern-Volmer方程分析表明, 银纳米粒子静态猝灭BHb的内源荧光. 由UV-Vis和荧光光谱的变化, 计算BHb与银纳米粒子的结合常数, 其数量级达到10⁹～10¹⁰. 同步荧光光谱的蓝移说明, 银纳米粒子扰动BHb分子内部的酪氨酸、色氨酸残基所处的微环境, 使之包埋于疏水腔中. 拟合计算远紫外CD数据发现, 银纳米粒子诱导BHb产生轻微的二级结构改变, α-螺旋含量降低. FTIR光谱结果提示, BHb中半胱氨酸残基的硫、羧基氧、酰胺及氨基酸残基中的氮原子与银纳米粒子可能有表面键合作用.     

二苯胺磺酸钠还原法制备粒径可控的金纳米粒子

采用二苯胺磺酸钠还原四氯合金酸的方法,在室温条件下,用SDS(十二烷基硫酸钠)、SDBS(十二烷基苯磺酸钠)作表面活性剂,成功地合成了金纳米粒子.分别讨论了还原剂二苯胺磺酸钠、表面活性剂(SDS、SDBS)及四氯台金酸的浓度等对金纳米粒子的粒径和形貌的影响.通过控制反应条件,可以合成出平均粒径大约为10、14、30、36nm的金纳米粒子.利用透射电镜(TEN)、紫外-可见(UV-Vis)吸收光谱对金纳米粒子进行了表征.研究结果表明不同的SDS或SDBS/HAuCl4的摩尔比,对金纳米粒子的尺寸大小有影响.     

双相分散聚乙烯吡咯烷酮包覆氧化锌纳米粒子的微乳液法制备,结构和光学性质

以乙酰丙酮锌为前躯体、聚乙烯吡咯烷酮(PVP)为表面活性剂,采用纳米微乳液法制备了有机相和水相双分散PVP包覆氧化锌(PVP-ZnO)纳米粒子;采用X射线衍射仪、透射电镜、红外光谱仪分析了其相组成、微结构及化学特征,利用紫外-可见吸收光谱仪和荧光光谱仪测定了其光学性质.结果表明,制备的纳米ZnO具有六方纤锌矿结构,粒径分布范围窄,结晶性好.纳米ZnO表面包裹PVP,使得PVP-ZnO在无机和有机溶剂中皆具有很好的分散性.与此同时,PVP-ZnO纳米粒子在紫外区尤其是373 nm处显示很强的紫外吸收,而在380nm的激发光下在496nm左右产生强蓝绿光发射,并在587nm处伴有弱黄绿光发射.     

帽状锌纳米结构的制备及其表面等离子体共振特性

利用真空热蒸发法在二氧化硅纳米粒子单层膜上沉积锌薄膜制备了帽状锌纳米结构. 采用透射电镜(TEM)、扫描电镜(SEM)、X射线衍射(XRD)和紫外-可见吸收光谱(UV-Vis)对样品的形貌、结构和光学特性进行了表征和研究. SEM照片表明所得到的复合纳米粒子为不完全包裹的帽状结构, 且其表面较粗糙. XRD分析结果显示在二氧化硅纳米粒子上沉积的锌膜呈多晶六角密堆结构. 吸收光谱研究表明, 帽状锌纳米结构在570～760 nm范围内具有明显的由纵向双极子表面等离子体共振引起的吸收峰, 且随着锌帽层厚度的增加或二氧化硅内核粒径的增大, 该吸收峰逐渐红移; 当内核粒径增大到500 nm时, 帽状锌纳米结构在412 nm附近还出现了一个四极子共振峰.     

维生素E绿色还原法制备银纳米粒子的研究

采用一种绿色还原法制备银纳米粒子,以维生素E为还原剂,淀粉为稳定剂,在液相中还原硫酸银,通过改变溶液的pH值和反应时间,得到不同粒径的黄色银纳米粒子,并分别采用透射电镜、红外光谱、紫外-可见吸收光谱、扫描电镜和电化学方法对银纳米粒子进行表征。结果表明:维生素E在溶液中被氧化生成苯醌,反应得到的银纳米粒子为球形,粒径为8~25 nm;在较强碱性条件下,得到的银纳米粒子尺寸较小,分布较均匀,其平均粒径约为10 nm;不同条件下生成的银溶胶分别在417、411、409、408 nm处出现紫外吸收峰,这些吸收峰均为银纳米粒子的表面共振吸收;生成的银纳米粒子具有很好的电化学性质,并对L-半胱氨酸的电化学反应显示了良好的催化活性。     

粒径可控纳米CeO_2的微乳液法合成

以十六烷基三甲基溴化铵(CTAB)/正丁醇/正辛烷/硝酸铈(Ce(NO3)3)水溶液(氨水)所形成的反相微乳液体系合成CeO2前驱体,利用热重(TG)和X射线衍射(XRD)分析方法确定了得到纳米CeO2的适宜焙烧温度为550℃,CeO2前驱体经550℃焙烧后得到纳米CeO2.采用XRD、透射电镜(TEM)、紫外-可见(UV-Vis)分光光度计等表征手段分别对纳米CeO2的晶形、形貌、粒径及紫外吸收性质进行了表征,该纳米CeO2粒子具有立方晶型结构,分散性较好、粒径范围为5-18nm.考察了微乳液中正辛烷与正丁醇质量比、Ce(NO3)3浓度对纳米CeO2粒径的影响,结果表明:利用微乳液法,通过改变微乳液中正辛烷与正丁醇质量比、Ce(NO3)3浓度能够对纳米CeO2粒径进行有效控制;纳米CeO2的粒径均随着正辛烷与正丁醇质量比和Ce(NO3)3浓度的增大而减小.同时,对不同条件下制得的纳米CeO2的紫外吸收性质进行了考察.     

Composition/structural evolution and optical properties of ZnO/Zn nanoparticles by laser ablation in liquid media

We present composition-controlled synthesis of ZnO-Zn composite nanoparticles by laser ablation of a zinc metal target in pure water or in aqueous solution of sodium dodecyl sulfate (SDS). By SDS concentration, composition and size of the nanoparticles can be controlled in a wide range. Relative amounts of the components Zn and ZnO, the particle size, and the microstructure can evolve with SDS concentration in solution. High SDS concentration corresponds to high relative amount of Zn nanoparticles existing as the core in the core/shell nanostructures, whereas low SDS concentration leads to high ZnO amount. This was explained by a dynamic mechanism on the basis of the competition between aqueous oxidation and SDS capping protection. Correspondingly, optical absorption spectra evolve from the excitonic peak of ZnO (about 350 nm) to the Zn surface plasmon resonance (about 242 nm) with rise of SDS concentration. A blue (about 450 nm) photoluminescence was observed in the obtained ZnO nanoparticles, which was attributed to existence of interstitial zinc in ZnO lattices. This study has revealed that laser ablation of active metal in liquid media is an appropriate method to synthesize a series of metal oxide semiconductor-metal composite nanoparticles with controlled composition and size.     

Sonochemical synthesis of cerium oxide nanoparticles-effect of additives and quantum size effect

Cerium oxide (CeO(2)) nanoparticles were prepared sonochemically, by using cerium nitrate and azodicarbonamide as starting materials, and ethylenediamine or tetraalkylammonium hydroxide as additives. The additives have a strong effect on the particle size and particle size distribution. CeO(2) nanoparticles with small particle size and narrow particle size distribution are obtained with the addition of additives; while highly agglomerated CeO(2) nanoparticles are obtained in the absence of additives. Monodispersed CeO(2) nanoparticles with a mean particle size of ca. 3.3 nm are obtained when tetramethylammonium hydroxide (TMAOH) is used as the additive and the molar ratio of cerium nitrate/azodicarbonamine/TMAOH is 1/1/1. Blue shifts of the absorption peak and the absorption edges of the products are observed in the UV-Vis absorption spectra as a result of the quantum size effect. The samples have been characterized using powder XRD, TEM, DLS, and absorption spectra.     

Synthesis of ZnO nanoparticles on a clay mineral surface in dimethyl sulfoxide medium

Nanocrystalline ZnO particles have been prepared with different methods using zinc cyclohexanebutyrate as precursor in dimethyl sulfoxide (DMSO) medium via alkaline hydrolysis. A series of preparations were carried out in the presence of layered silicates (kaolinite and montmorillonite). It was revealed by different measurement techniques that the presence of the clay minerals has a stabilization influence on the size of the ZnO nanocrystals. UV-vis absorption spectra show a blue shift when the nanoparticles are prepared in the presence of the clay minerals. The average particle diameters calculated from the Brus equation ranged from 2.6 to 13.0 nm. The UV-vis spectra of the synthesized nanoparticles did not show any red shift after 2-3 days, demonstrating that stable ZnO nanocrystals are present in the dispersions. The presence of the ZnO nanoparticles was also proven by fluorescence measurements. A number of the nanoparticles are incorporated into the interlamellar space of the clays, and an intercalated structure is formed as proven by X-ray diffraction (XRD) measurements. The size of the nanoparticles in the interlamellar space is in the range of 1-2 nm according to the XRD patterns. Transmission electron microscopy and high-resolution transmission electron microscopy investigations were applied to determine directly the particle size and the size distribution of the nanoparticles.     

Preparation and properties of polymer/zinc oxide nanocomposites using functionalized zinc oxide quantum dots

Poly(methyl methacrylate) (PMMA)/zinc oxide (ZnO) or carbazole polymer (PCEM)/ZnO nanocomposites, which are composed of high molecular weight PMMA or PCEM with narrow molecular weight distributions and ZnO nanoparticles, were successfully prepared by atom transfer radical polymerization (ATRP) initiated by 2-bromo-2-methylpropionyl (BMP) group (ZnBM) introduced onto the ZnO nanoparticle surfaces. Introduction of the BMP group onto the ZnO surfaces was achieved by esterification of OH group of the ZnO surfaces. The chemically attached OH group-having ZnO nanoparticles (ZnHM) were fabricated by sol-gel reaction from zinc acetate dihydrate, followed by treatment of the ZnO nanoparticles with 2-hydroxypropionic acid (HPA). The ZnHM nanoparticles showed one UV absorption and two emission bands: UV emission peak and broad visible emission band, while the ZnBM exhibited broad UV absorption and no emission spectra. The PMMA/ZnO nanocomposites displayed UV absorption and photoluminescent (PL) band with blue emission on the basis of the ZnHM nanoparticles, where the ZnO nanoparticles dispersed homogeneously in the PMMA matrix. The PCEM/ZnO nanocomposites depicted UV emission peak due to the carbazole unit in the UV range, but no visible emission. Thermal properties of the PMMA/ZnO nanocomposites were improved by dispersion of the ZnO nanoparticles into the PMMA, but the PCEM/ZnO nanocomposites showed no improvement of the thermal properties.     

Influence of solvent on the growth of ZnO nanoparticles

We have synthesized ZnO nanoparticles by precipitation from zinc acetate in a series of n-alkanols from ethanol to 1-hexanol as a function of temperature. In this system, nucleation and growth are relatively fast and, at longer times, the average particle size continues to increase due to diffusion-limited coarsening. During coarsening, the particle volume increases linearly with time, in agreement with the Lifshitz-Slyozov-Wagner (LSW) model. The coarsening rate increases with increasing temperature for all solvents and increases with alkanol chain length. We show that the rate constant for coarsening is determined by the solvent viscosity, surface energy, and the bulk solubility of ZnO in the solvent.     

Physicochemical Interaction of ZnO Fine Particles with 5‐Mono‐(4‐carboxyphenyl)‐10,15,20‐Triphenylporphyrin

This study deals with an investigation on the preparation and physicochemical interactions of ZnO nanoparticles with acid functionalized porphyrin [5‐mono‐(4‐carboxyphenyl)‐10,15,20‐triphenylporphyrin (CPTPP)] for photovoltaic applications in a detailed manner. Zinc acetate and sodium hydroxide were used as the starting materials for the synthesis of ZnO nanoparticles at 60 °C in an alcoholic medium. The freshly prepared fine particles were then functionalized with CPTPP. Both the virgin and pregnant ZnO particles were characterized by using UV‐Visible spectrophotometry (UV), fluorescence emission (PL), Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The band gap energy obtained for ZnO particles, having a value of 3.47 eV, shows significant quantum confinement effect and enhanced photophysical activity. FTIR analysis of the doped ZnO nanostructures showed the presences of some chemical species. SEM analysis revealed a clear change in the surface morphologies of undoped ZnO. The average crystallite size of nanoparticles, calculated from XRD peaks, was found in the nano regime. The lattice parameters calculated for ZnO nanocrystals were also found in good agreement with those given in the literature. From the enhancement in the red shift of the UV‐Vis spectra, it is concluded that hybridization of acid functionalized porphyrin can cause a significant expansion in the total absorption region of ZnO semiconductor for photovoltaic applications.     

A simple solvothermal route towards the morphological control of ZnO and tuning of its optical and photocatalytic properties

ZnO nanoparticles with different morphologies were solvothermally synthesized by controlling the alkali (sodium hydroxide) concentration in an isopropanol solution. The products were characterized by means of powder X-ray diffraction, UV-visible absorption spectra, scanning electron microscopy, transmission electron microscopy, and selected area electron diffraction. The morphologies of the formed ZnO nanocrystals were dependent on the concentration of the alkali, and with increases of sodium hydroxide concentration, the ZnO nanocrystals evolved from rod to hexagonal bipyramid, and then to a flower-like nanostructure. The flower-like nanostructure resulted from the etching of the hexagonal bipyramid by the excess alkali. The photoluminescence and photocatalytic properties of the prepared ZnO were investigated. The difference of green emission among the ZnO nanocrystals indicated that a higher sodium hydroxide concentration led to a higher level of defects. The size, the surface structure and defects in the ZnO nanocrystals affected its photo-degradation characteristics.     

Enhanced photocatalytic activity of ZnO nanoparticles by surface modification with KF using thermal shock method

ZnO nanoparticles were modified with KF using thermal shock method at various temperatures in order to improve the photocatalytic activity of ZnO under both UVA and visible light irradiation. The influences of KF-modification on the crystal structure, morphology, UV–visible absorption, specific surface area as well as surface structure of ZnO were respectively characterized by XRD, FE-SEM, UV–Visible diffuse reflectance, N₂ adsorption and XPS spectroscopy. The photocatalytic activity was evaluated via the degradation of methylene blue under UVA irradiation. According to the results, the thermal shock process with KF did not modify the structure, the particle size and the optical properties of ZnO nanoparticles but successfully increase their UVA and visible light induced photocatalytic activity. This enhancement of activity may be attributed to the increase of surface hydroxyl groups and zinc vacancies of modified ZnO samples.     

Synthesis of P(AA‐SA)/ZnO composite latex particles via inverse miniemulsion polymerization and its application in pH regulation and UV shielding

Poly(acrylic acid‐co‐sodium acrylate)/zinc oxide, P(AA‐SA)/ZnO, composite latex particles were synthesized by inverse miniemulsion polymerization. The ZnO nanoparticles were prepared by hydrothermal synthesis and undergone oleic acid (OA) surface treatment. The X‐ray diffraction pattern and FT‐IR spectra characterized the crystal structure and functional groups of OA‐ZnO nanoparticles. An appropriate formulation in preparing P(AA‐SA) latex particles, ensuring the dominant in situ particle nucleation and growth, was developed in our experiment first. Sodium hydroxide was chosen as a costabilizer, because of its ability to increase the deprotonation of acylic acid and enhance the hydrophilicity of monomer, acrylic acid besides providing osmotic pressure. The growth mechanism of P(AA‐SA)/ZnO composite particles was proposed. The OA‐ZnO nanoparticles were adsorbed on or around the surface of P(AA‐SA) latex particles by hydrophobic interaction, thus enhanced the interfacial tension over latex particles. The P(AA‐SA)/ZnO composite latex particles owned better thermal stability than pure latex particles. The pH regulation capacity was excellent for both ZnO and P(AA‐SA) particles. Combining P(AA‐SA) and ZnO nanoparticles into composite particles, the performance in pH regulation and UV shielding was discussed from our experimental results. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8081–8090, 2008     

The effect of surface properties on visible luminescence of nanosized colloidal ZnO membranes

Luminescence properties of nanosized zinc oxide (ZnO) colloids depend greatly on their surface properties, which are in turn largely determined by the method of preparation. ZnO nanoparticles in the size range from 3 to 9 nm were prepared by addition of tetramethylammonium hydroxide ((CH3)4NOH) to an ethanolic zinc acetate solution. X-ray diffraction (XRD) indicates nanocrystalline ZnO membranes with polycrystalline hexagonal wurtzite structure. The ZnO membranes have a strong visible-emission intensity and the intensity depends upon hydrolysis time. The infrared spectra imply a variety of forms of zinc acetate complexes present on the surface of ZnO particles. The effect of the ZnO membrane surface properties on photoluminescence is discussed.