Ethylenediamine and Hydroxyethylenediamine Complexes of Zinc(II): A Potentiometric Study of Composition and Stability

The equilibrium potential of saturated zinc amalgam is studied as a function of concentration of free ethylenediamine molecules, [en], in the region [en] 0.001–1 M in solutions of pH 9.5, 10.5, and 11.5. At the concentration of zinc(II) ions 2 × 10^–3 M and [en] = 1 M only simple trisethylenediamine complexes of zinc(II) form in all the solutions. At smaller [en] and pH 9.5 and 10.5, complexes Zn(en)₂ ²⁺ and Zn(en)₂OH⁺ are also present; these are complemented at pH 11.5 by Zn(en)₂(OH)₂ at [en] 0.005–0.1 M. Stability constants for these complexes are calculated.     

Thermodynamics of Protonated Amine–Hexacyanoferrate(II) Complex Formation in Aqueous Solution

Thermodynamic parameters, G°, H° and TS° are reported for the formation of proton amine–hexacyanoferrate(II) complexes, in aqueous solution, at 25°C. H° were determined by the temperature dependence of formation constants and/ or by direct calorimetry in aqueous solution, at T = 25°C. Enthalpy changes for the reaction H_iAⁱ⁺ + H_j Fe(CN) ₆ ^j-4 = AFe (CN)₆H _i+j ^i+j-4 (where A = methylamine, ethylenediamine, and tetraethylenepentamine) are quite low and the main contribution to the stability of these complexes arises from the entropic term, as expected for electrostatic interactions. When j = 0, the formation entropy is linearly dependent on i according to the simple equation TS° = 13.4 i kJ-mol^–1.     

Molar enthalpies of transfer of divalent transition metal lons and their chloro complexes from N,N-dimethylformamide to N,N-dimethylacetamide

The molar enthalpies of transfer _t H ^° of some divalent metal ions (M-Mn, Co, Ni and Zn) and their chloro complexes from N,N-dimethyl-for-mamide (DMF) to N,N-dimethylacetamide (DMA) have been determined using the tetraphenylarsonium-tetraphenylborate (TATB) assumption at 25°C. Although physicochemical properties of DMF and DMA as solvent are similar, the _t H ^°(M ²⁺) value increased significantly in the order Mnt H ^° values for the mono-and dichloro complexes showed also a strong metal dependence, while those for the triand tetrachloro complexes practically do not. These results can be reasonably explained in terms of steric hindrance upon solvation of the metal ions and complexes in DMA.     

Heat capacities of aqueous perchloric acid and sodium perchlorate at 298°K: ΔC p o of ionization of water

We have used a Picker flow calorimeter for measurements leading to apparent molal heat capacities of dilute aqueous solutions of HClO₄ and NaClO₄ at 298°K. Results have been used to derive _c ^° =–27.1J-°K ^–1-mole ^–1 for HClO₄ (aq.), _c ^° =15.2J-°K ^–1-mole ^–1 for NaClO₄ (aq.), and C _p=–213.₈J-°K^–1-mole^–1 for ionization of water.     

Thermodynamics of the dissociation of ammonium ion in seawater from 5 to 40°C

The dissociation constant of NH ₄ ⁺ and the associated thermodynamic functions H° and S° in synthetic seawaters of salinity 20.31, 35.00, and 44.55 have been determined by emf measurements of cells without liquid junction over the temperature range 5 to 40°C. Cells with hydrogen electrodes and silver-silver chloride electrodes, whose standard potentials in seawater media were determined in an earlier investigation, were used. At a given temperaturet (in °C), pK _a varies linearly with the formal ionic strengthI _f (uncorrected for ion pairing) according to pK _a=pK _a ^w +(0.1552–0.0003142t)I _f where pK _a ^w is the pK in pure water. The medium effect of seawater on H° amounts to less than 200 cal-mole^–1 for a change inI _f from 0 to 0.72 mole-kg^–1, and S° is less than 1 cal-°K^–1-mole^–1 in all of the media studied, as it is in water. The observed salt effect on pK _a is in close agreement with values predicted from theories of ion-ion interactions.     

Catalytic Activity of Thallium, Lead, and Bismuth Adatoms in the Gold Dissolution Reaction in Cyanide Solutions: A Comparative Characterization

Quartz microgravimetry is used to determine the ratio between coefficients of mass transfer (1 : 0.54 : 0.48), which characterizes relative values of rates of diffusion of hydroxy complexes of thallium, lead, and bismuth in alkaline solutions. The ratio is used when refining the condition under which on a renewable electrode in solutions containing these ions at the concentration c _i the electrode coverage by relevant adatoms _i with increasing duration of contact of the electrode with solution reaches constant values: (c _Tl t) = (0.54c _Pb t) = (0.48c _Bi t). Measured are i,t curves on a renewable gold electrode at E = const in solutions containing 0.1 M KCN, 0.1 M KOH, 0.01 M KAu(CN)₂, and 8 × 10^–6 M compounds of thallium or 1.5 × 10^–5 M, lead, or 1.6 × 10^–5 M, bismuth. Shown is that at (, E) = const the currents of dissolution of gold in these solutions increase in the series Tl < Pb < Bi, which evidences an increase in this series of the catalytic activity of adatoms of these metals. Shown is that at = const the catalytic action of adatoms of thallium and bismuth has an approximately additive character. The obtained data are analyzed with allowance made for the explanation offered earlier for the catalytic effect of adatoms on the anodic dissolution of gold based on the hypothesis about the shift of the potential of the free zero charge in the negative direction after substituting a metal atom for chemisorbed cyanide ions.     

Ionization constants of aqueous ammonia from 25 to 250°C and to 2000 bar

The ionization constant of ammonia has been determined by conductivity measurements and found to vary from 1.77×10^–5 at 25°C to 1.3×10^–6mol-kg^–1 at 250°C. The pressure effect to 2000 bar has been measured and the ratio K₂₀₀₀/K₁ is 6.8 at 25°C and 11 at 250°C. The standard molar volume change for the ionization at 1 bar, V ₁ ^o , changes from –28.8 at 25°C to –67 cm³-mol^–1 at 250°C.     

Kinetics and mechanism of electroreduction of Pd(II) complexes

The kinetics and mechanism of processes of reduction of Pd(II) complexes with a number of inorganic (NH₃ , Cl^– , etc.) and organic (ethylenediamine, glycine, -alanine, etc.) ligands on a dropping-mercury electrode and a Pd electrode in solutions with various concentrations of ligands, hydrogen ions, and supporting electrolytes are reviewed. The nature of electrochemical and chemical steps of processes of reduction of various complexes of Pd(II) is discussed.Translated from Elektrokhimiya, Vol. 40, No. 12, 2004, pp. 1494–1502.Original Russian Text Copyright © 2004 by Kravtsov.     

The preparation and characterisation of chromium(III) complexes of C-meso-5, 12-dimethyl-1, 4, 8, 11-tetraazacyclotetradecane (LM). Aquation and base hydrolysis kinetics ofcis- andtrans-[CrLMCl2]+

Summary The reaction of [CrCl₃(DMF)₃] with C-meso-5, 12-dimethyl-1, 4, 8, 11-tetra-azacyclotetradecane(L_M) in DMF gives a mixture ofcis-[CrL_MCl₂]Cl (ca. 90%) andtrans-[CrL_MCl₂]Cl (ca. 10%). These complexes are readily separated, as thecis-isomer is insoluble in warm methanol while thetrans-isomer is soluble. Using the dichlorocomplexes as precursors it has been possible to prepare a range ofcis-[CrL_MX₂]⁺ complexes (X=Br^–, NO ₃ ^– , N ₃ ^– , NCS^– and X₂=bidentate oxalate) and alsotrans-[CrL_MX₂]⁺ complexes (X=Br^–, H₂O or NCS^–). The spectroscopic properties and detailed stereochemistry of the complexes are discussed.The aquation and base hydrolysis kinetics ofcis- andtrans-[CrL_MCl₂]⁺ have been studied at 25° C. Base hydrolysis of thecis-complex is extremely rapid with K_OH =1.46×10⁵ dm³ mol^–1 at 25° C. This unusual reactivity appears to be associated with thetrans II stereochemistry of thesec-NH centres of the macrocycle. Base hydrolysis of thetrans complex with thetrans III chiral nitrogen stereochemistry is quite normal with k_OH =1.1 dm³ mol^–1 s^–1 at 25° C.     

Synthesis,thermodynamic properties and kinetics of the acid-catalyzed dissociation of nickel(II) diamido polyamino complexes

The ligands 1,10-N,N-bis(2-hydroxymethylbenzoyl)-1,4,7,10-tetraazadecane (L₁) and 1,11-N,N-bis(2-hydroxymethylbenzoyl)-1,4,8,11-tetraazaundecane (L₂) have been synthesized. The stability constants of Ni^II complexes of ligands L₁ and L₂ have been studied at 25 °C using pH titrations. The kinetics of general acid (HCl, 0.04–2.34 mol dm^–3) or buffer (DEPP or DESPEN, 0.05 mol dm^–3, pH 4.83–5.72)-catalyzed dissociation of these Ni^II complexes have been investigated at 25 °C using a stopped-flow spectrophotometer. The ionic strength of solution was controlled at I = 2.34 mol dm^–3 (KCl + HCl) and I = 0.1 mol dm^–3 (KNO₃, buffer), respectively. The kinetic dissociation of Ni^II complexes catalyzed by HCl obeys the equilibrium k _obs = k _1d + k _2H[H⁺], whereas in buffer solution the observed rate constant k _obs = k _d + k _1H[H⁺]. At pH < 1.5, both the proton-assisted and direct protonation pathways contribute to the rates, whereas solvation is the dominant pathway at pH > 6. In the 4.8–5.7 pH range, the complexes dissociate mainly through a proton-assisted pathway.     

Mass,size and shape of micelles formed in aqueous solutions of ethoxylated nonyl-phenols

The study was extended to analysis of mass, size and conformation of micelles formed in aqueous solutions of ethoxylated nonyl phenols. The results obtained by ultracentrifugal technique between 293 and 323 K have proved that the slightly ethoxylated nonyl phenols form micelles with high molecular mass and larger size at constant temperature, while the increasing length of the ethylene oxide chain favours formation of micelles of smaller molecular mass and size. The transformation of conformation from oblate to spherical shapes ensues with increasing temperature at constant ethoxy number or with ethoxylation at constant temperature. The second virial coefficient decreases with increasing temperature and decreasing ethoxy number. In accordance with the earlier conclucions, the change of the second virial coefficient relates to enhanced variation of monomer solubility, stabilization of micelle structure and increased deviation from ideal behaviour of a given micellar system.Symbols a major axis of micelle, Å - a _m attractivity factor, cm³ erg molecule² - b minor axis of micelle, Å - c concentration, g dm^–3 - c _b equilibrium concentration at the bottom of the cell, g dm^–3 - c _m equilibrium concentration at the meniscus of the cell, g dm^–3 - c _o initial concentration in the cell, g dm^–3 - c _M critical micellization concentration, mol dm^–3 - e eccentricity - f _IS Isihara-constant - f/f _o frictional ratio of micelle - amount of water in micelle per ethoxy group, mol H₂O/mol EO - n aggregation number, monomer micelle^–1 - n _EO number of ethoxy groups - r distance of Schlieren peak from the axis, cm - r _b distance of cell bottom from the axis, cm - r _m distance of cell meniscus from the axis, cm - R _h equivalent hydrodynamic radius of micelle, Å - s _t sedimentation coefficient, s - reduced sedimentation coefficient, s - reduced limiting sedimentation coefficient, s - ¯v _t volume of micelle, cm³ micelle^–1 - partial specific volume of solute, cm³g^–1 - partial specific volume of solute reduced to 293 K, cm³ g^–1 - B _a, B_e constants, cm³ mol g^–2 - B ₂ second virial coefficient, cm³ mol g^–2 - M _m ^a mass average apparent molecular mass of micelle, g mol^–1 - M _m mass average molecular mass of micelle corrected withB ₂, g mol^–1 - M _m ^cM mass average molecular mass of micelle belonging toc _M, g mol^–1 - M ¹ mass average molecular mass of monomer, gmol^–1 - N _A the Avogadro's number, molecule mol^–1 - R universal gas constant, erg mol^–1 K^–1 - T temperature, K - _t ^o dynamic viscosity of solvent atT temperature, g cm^–1 s^–1 - dynamic viscosity of solvent at 293 K, g cm^–1 s^–1 - _t density of solution atT temperature, g cm^–3 - _t ^o density of solvent atT temperature, g cm^–3 - density of solvent at 293 K, g cm^–3 - angular velocity, rad s^–1 - time, s     

Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

Effect of solvent on reactions of coordination complexes. Part 12: Kinetics and mechanism of chloride substitution reactions ofcis-(chloro)(2-aminoethanol)bis(ethylenediamine) cobalt(III) andcis-(chloro)(1-aminopropan-2-ol)-bis(ethylenediamine) cobalt(III) ions in acidic and basic ethylene glycol-water media

Summary The loss of chloride ion from the title complexes resulted in the predominant formation of the chelated amino-alcohol productscis-[Co(en)₂(NH₂CH₂CH(X)O/H)]^2+/3+ (X=H or Me). The kinetics of chloride release were investigated in aqueous ethylene glycol (EG) media (0 to 80% by wt of EG) at 40°–65°C in acidic media and at 20°–35°C in basic media. The rate constants decreased linearly with increasing mol fraction of the cosolvent. The plots of log kversus D _s ^–1 (S_s=bulk dielectric constant, k=first order or second order rate constants) were essentially linear with negative slopes for the reactions in an acidic medium, and tended to be curved for the base catalysed reactions. The activation enthalpies and entropiesversus X_EG (X_EG=mol fraction of EG) plots indicated extrema which might be associated with the effects of the solvent structural changes on these thermodynamic parameters. The observed solvent isotope effect at 50°C, [HClO₄]=0.010 mol dm^–3 for Cl^– release was lower than the value for the aquation ofcis-[Co(en)₂(alkylamine)Cl]²⁺ complexes reported in the literature. This is consistent with the lack of direct solvent molecule participation in the actual act of substitution at the cobalt(III) centre, as expected for a true intramolecular reaction.Part-11: A. C. Dash and J. Pradhan,Ind. J. Chem.,29A, 167 (1990).     

Kinetics and Mechanism of Reduction of Nickel(II) Ethylenediamine Complexes at a Dropping Mercury Electrode

Effect of concentration of ethylenediamine molecules and supporting electrolytes (NaF, NaClO₄) on the kinetics of electroreduction of nickel(II) ethylenediamine complexes at dropping and stationary mercury electrodes is studied. The limiting current on the dropping electrode is found to have diffusion–kinetic nature at free ethylenediamine molecule concentrations of 0.5 mM to 0.05 M. The slow electrochemical stage is presumably preceded by a slow chemical stage and a reversible chemical stage. In the former, one chelate cycle in the source complex Ni(en)²⁺ ₃ opens; and in the latter, a monodentate-coordinated ethylenediamine molecule is abstracted. The conclusion is drawn about an inner-sphere mechanism of the electrochemical stage which involves Ni(en)²⁺ ₂ complexes specifically adsorbed on mercury.     

Electrical properties of poly(bis(β-phenoxyethoxy)phosphazene) and its complexes

Electrical and dielectrical properties of poly(bis(-phenoxyethoxy)phosphazene) (I) and its complexes with various content ratios of AgSO₃CF₃ to monomeric unit (0.25/1 (II) and 0.5/1 (III) in molar ratio) were investigated.Dc conductivity of respective samples at 18 °C were 6.1×10^–12, 4.4×10^–9, and 7.1×10^–8 S/m.Dc conduction was considered to be due to ion hopping. Charge mobility ranged from 3×10^–12 to 6× 10^–11 m²/Vs depending on the applied field in sample II. In sample I, a tan peak was found which can be ascribed to molecular relaxation of main chains. The peak vanished upon introducing AgSO₃ CF₃. Temperature dependence of total conductivity ( _T ) measured byac method in the temperature range between –150 °C and 50 °C showed several peaks at the temperatures corresponding to the peak temperatures of tan. Total conductivities of respective samples at 100 kHz were 4.9×10^–7 (69 °C), 1.7×10^–4 (45 °C), and 1.5×10^–4(40°C)S/m.     

Thermodynamics of the Second Dissociation Constant and Standards for pH of 3-(NMorpholino) Propanesulfonic Acid (MOPS) Buffers from 5 to 55°C

The second dissociation constant pK2 of 3-(N-morpholino)propanesulfonic acid (MOPS) has been determined at eight temperatures from 5 to 55°C by measurements of the emf of cells without liquid junction, utilizing hydrogen electrodes and silver–silver chloride electrodes. The pK2 has a value of 7.18 ± 0.001 at 25°C and 7.044 ± 0.002 at 37°C. The thermodynamic quantities G°, H°, S°, and C _p ^o have been derived from the temperature coefficients of the pK ₂. This buffer at ionic strength I = 0.16 mol-kg^–1 close to that of blood serum, has been recommended as a useful secondary pH standard for measurements of physiological fluids. Five buffer solutions with the following compositions were prepared: (a) equimolal mixture of MOPS (0.05 mol-kg^–1) + NaMOPS, (0.05 mol-kg^–1); (b( MOPS (0.05 mol-kg^–1) + NaMOPS (0.05 mol-kg^–1) + NaCl (0.05 mol-kg^–1); (c) MOPS (0.05 mol-kg^–1) + NaMOPS (0.05 mol-kg^–1); + NaCl (0.11mol-kg^–1); (d) MOPS (0.08 mol-kg^–1) + NaMOPS (0.08 mol-kg^–1); and (e)MOPS (0.08 mol-kg^–1) + NaMOPS (0.08 mol-kg^–1) + NaCl (0.08 mol-kg^–1).The pH values obtained by using the pH meter + glass electrode assembly are compared with those measured from a flow–junction calomel cell saturated with KCl (cell B), as well as those obtained from cell (A) without liquid junction at 25 and 37°C. The conventional values of the liquid junction potentials E _j have been obtained at 25 and 37°C for the physiological phosphate reference solution as well as for the MOPS buffers (d) and (e) mentioned above.     

Kinetic and EPR studies on radical polymerization. Radical polymerization of di-2[2-(2-methoxyethoxy)ethoxy]ethyl itaconate

The polymerization of di-2[2-(2-methoxyethoxy)ethoxy]ethyl itaconate (1) with dimethyl 2,2-azobisisobutyrate (2) was studied, in benzene, kinetically and spectroscopically with the electron paramagnetic resonance (EPR) method. The polymerization rate (R _p) at 50°C is given by the equation:R _p=k[2]^0.48 [1]^2.4. The overall activation energy of polymerization was calculated to be 34 kJ·mol^–1. From an EPR study, the polymerization system was found to involve EPR-observable propagating polymer radicals of 1 under the actual polymerization conditions. Using the polymer radical concentration, the rate constants of propagation (k _p) and termination (k _t) were determined. With increasing monomer concentration,k _p(1.54.3 L·mol^–1·s^–1 at 50°C) increases andk _t (1.0·10⁴4.2·10⁴ L·mol^–1·s^–1 at 50°C) decreases, which seems responsible for the high dependence ofR _p on the monomer concentration. The activation energies of propagation and termination were calculated to be 11 kJ·mol^–1 and 84 kJ·mol^–1, respectively. For the copolymerization of 1(M ₁) and styrene (M ₂) at 50°C in benzene the following copolymerization parameters were found:r ₁=0.2,r ₂=0.53, Q₁=0.57, ande ₁=+0.7.     

Thermochemistry of Alcohols: Experimental Standard Molar Enthalpies of Formation and Strain of Some Alkyl and Phenyl Congested Alcohols

The standard molar enthalpies of formation _f H _m ^° (cr) at the temperature T = 298.15 K were determined using combustion calorimetry for di-tert-butyl-methanol (A), di-tert-butyl-iso-propyl-methanol (B), and di-phenyl-methyl-methanol (C). The standard molar enthalpies of sublimation _cr ⁸ H _m ^° of these compounds and of di-phenyl-methanol (D) were obtained from the temperature variation of the vapor pressure measured in a flow system. Molar enthalpies of fusion _cr ¹ H _m ^° of the compounds A–D and of tri-phenyl-methanol (E) were measured by differential scanning calorimeter (DSC). From these data and data available from the literature, the following standard molar enthalpies of formation in gaseous phase _f H _m ^° (g) for A, (–397.0 ± 1.2); B, (–418.1 ± 2.3); C, (–34.2 ± 1.3); and D, (0.9 ± 2.1) kJ · mol^–1 were derived, which correspond to strain enthalpies (H _S) of 46.1, 114.7, 8.1, and 5.0 kJ · mol^–1, respectively.     

Kinetics and mechanism of base hydrolysis oftrans-bis(Hmalonato)bis(ethylenediamine)cobalt(III) ion

Summary The kinetics of the first step of base hydrolysis oftrans-bis(Hmalonato)bis(ethylenediamine)cobalt(III) [malH^–=HO₂CCH₂CO ₂ ^– ] has been investigated in the 15–35° C range, I=0.3 mol dm^–3 (NaClO₄) and [OH^–]=0.015–0.29 mol dm^–3. The rate law is given by –d In[complex]_T/dt=k₁[OH^–] and at 30° C, k₁=8.5×10^–3 dm³ mol^–1s^–1, H=117.0±7.0 kJ mol^–1 and S=99.0±24.0 JK^–1mol^–1. The activation parameters data are consistent with the SN₁ cb mechanism.     

Protonation equilibria of nitrilotris(methylenephosphonato)-and ethylenediamine-tetrakis(methylenephosphonato)-complexes of scandium,yttrium, and lanthanoids

The protonation equilibria of nitrilotris(methylenephosphonic acid) (NTMP, H₆L) and ethylenediaminetetrakis(methylenephosphonic acid) (EDTMP, H₈L) complexes of scandium, yttrium, and lanthanoids have been studied potentiometrically at 25°C and at an ionic strength of 0.1 mol-dm^–3 KNO₃. The first protonation constants of NTMP complexes of lanthanoids, K _MHL , decrease with decreasing of the ionic radius of the lanthanoid [log K _MHL =7.82 (La³⁺) –6.90 (Lu³⁺)] and show a so-called Tetrad effect. The second protonation constants, K _{MH 2}L, change very little with the lanthanoid metal ions (logK _{MH 2}L=5.3–5.7). These results suggest that, in the first protonation process in ML, the proton attacks the nitrogen of NTMP rupturing the M-N of M(ntmp)^3–. The pattern of the change in the protonation constants of the EDTMP complexes with the atomic number of the lanthanoid is quite different from that of the NTMP complexes. This fact indicates that the manner of protonation of the EDTMP complexes differs from that of NTMP complexes. The protonation constants of yttrium complexes of NTMP and EDTMP agree with those of lanthanoid complexes, whereas those of scandium complexes deviate from the values predicted from its ionic radius.