金属离子对CdS量子点/聚酰胺-胺树形分子纳米复合材料光致发光性能的影响

以聚酰胺-胺树形分子为模板制备了分散好、尺寸均匀的CdS量子点，并用分光光度滴定法研究了Cd²⁺、Zn²⁺、Pb²⁺、Cu²⁺、Mn²⁺几种金属离子对其光致发光性能的影响。发现不同离子对CdS量子点的发光性能影响不同:Cd²⁺和Zn²⁺使量子点荧光增强，Pb²⁺、Cu²⁺和Mn²⁺使其荧光有不同程度淬灭。这归因于金属离子对CdS量子点表面的修饰作用。Cd²⁺能减少由S^2-悬键构成的非辐射复合中心，增强树形分子对量子点表面缺陷的钝化作用，并能在量子点周围形成类肖特基能垒，从而显著增大CdS量子点的光致发光效率。由于ZnS与CdS的晶格参数非常接近，Zn²⁺能起到与Cd²⁺类似的作用，使CdS量子点的发光效率大大增强。Pb²⁺和Cu²⁺能取代Cd²⁺在CdS量子点表面生成窄带隙的壳层，对其发光有很强的淬灭作用。由于块体PbS的带隙比块体CuS窄，故Pb²⁺的淬灭能力强于Cu²⁺。Mn²⁺能破坏Cd²⁺与PAMAM树形分子的配位键，降低树形分子对CdS量子点表面缺陷的钝化作用，且其本身在量子点表面构成了新的荧光淬灭中心，但Mn²⁺也能形成较弱的类肖特基能垒，故对量子点的发光淬灭作用较弱。     

MOF-1和Tb@MOF-1荧光探针的设计、 合成及对痕量Cr2O72-、 S2O82-离子的识别

采用5-((4-吡啶基)甲氧基)-异烟酸(H₂PLIA)、1,3,5-三(1-咪唑基)-苯(TIB)合成了金属有机骨架[Cd(PLIA)(TIB)]_n (MOF-1),MOF-1是具有理想一维孔道的二维结构化合物,其一维孔道由柔性三角形PLIA^2-配体和刚性三角形TIB配体间隔形成。利用MOF-1 易掺杂的优势,采用后修饰合成策略制备了Tb@MOF-1。对MOF-1 和Tb@MOF-1 进行了基本表征及荧光探针性能研究。2种探针材料具有相同的结构。MOF-1和Tb@MOF-1分别对水溶液中的Cr₂O₇^2-和S₂O₈^2-离子具有较强荧光识别能力,均有响应时间快,稳定性、选择性、灵敏度高的特点。研究了MOF-1和Tb@MOF-1对Cr₂O₇^2-和S₂O₈^2-的荧光识别机理,其不同可能与Tb³⁺离子掺杂有关。     

静电纺丝技术制备Y2O3∶Eu3+纳米带及其发光性质

采用静电纺丝技术制备了PVP/[Y(NO₃)₃+Eu(NO₃)₃]复合纳米带,将其进行热处理,获得了Y₂O₃∶Eu³⁺纳米带。采用XRD、FTIR、SEM、TEM、荧光光谱等技术对焙烧后的样品进行了表征。结果表明：600 ℃焙烧即可获得Y₂O₃∶Eu³⁺纳米带,800 ℃时结晶更为良好,产物属于立方晶系。纳米带表面光滑,由平均直径为30 nm的小颗粒紧密排列而成,为多晶结构。随着温度升高,纳米带宽度减小。焙烧800 ℃获得的Y₂O₃∶Eu³⁺纳米带的发光性质优于焙烧600 ℃的Y₂O₃∶Eu³⁺纳米带。与体材料相比,该纳米带的激发光谱Eu³⁺-O^2-电荷迁移态(CTB)发生红移,发射光谱发生蓝移。     

用硫脲分子表面修饰的CdS纳米粒子的合成和表征

报道了用硫脲分子进行表面化学修饰的CdS纳米粒子的合成方法,并引入了AOT(磺基琥珀酸双-2-乙基己基酯钠盐)作为平衡反离子,进一步对CdS表面作了修饰,增加了CdS纳米粒子在有机溶剂中的稳定性和可分散性。我们还探讨了温度、浓度、pH等因素对合成的影响,并通过TEM、XRD、FT-IR等手段对产物结构进行了表征。所得微粒粒径为5 nm左右,呈球形,硫脲分子与CdS纳米粒子富Cd²⁺表面通过形成Cd-S配位键而修饰在粒子表面。这种表面修饰的CdS纳米粒子将在非线性光学及自组装方面具有优     

MOF-1和Tb@MOF-1荧光探针的设计、合成及对痕量Cr2O72-、S2O82-离子的识别

采用5-（（4-吡啶基）甲氧基）-异烟酸（H₂PLIA）、1,3,5-三（1-咪唑基）-苯（TIB）合成了金属有机骨架[Cd （PLIA）（TIB）]_n （MOF-1）。MOF-1是具有理想一维孔道的二维结构化合物,其一维孔道由柔性三角形PLIA^2-配体和刚性三角形TIB配体间隔形成。利用MOF-1易掺杂的优势,采用后修饰合成策略制备了Tb@MOF-1。对MOF-1和Tb@MOF-1进行了基本表征及荧光探针性能研究。2种探针材料具有相同的结构。MOF-1和Tb@MOF-1分别对水溶液中的Cr₂O₇^2-和S₂O₈^2-离子具有较强荧光识别能力,均有响应时间快,稳定性、选择性、灵敏度高的特点。研究了MOF-1和Tb@MOF-1对Cr₂O₇^2-和S₂O₈^2-的荧光识别机理,其不同可能与Tb³⁺离子掺杂有关。     

TiO2/Gd2O3纳米粉体的制备、表征及光催化活性

利用酸催化的溶胶-凝胶法制备了纯TiO₂和Gd³⁺(0.5wt%)掺杂的TiO₂纳米粉体，采用XRD、BET、XPS、紫外-可见漫反射谱(DRS)和表面光电压谱(SPS)等技术进行了表征；以亚甲基蓝(MB)的光催化降解为探针反应，评价了其光催化活性；探讨了Gd³⁺掺杂对TiO₂纳米粉体的光催化活性的影响机制。结果表明，TiO₂/Gd₂O₃纳米粒子对MB溶液的光催化活性提高到纯TiO₂的1.5倍。掺杂Gd³⁺可以强烈抑制TiO₂由锐钛矿相向金红石相的转变；阻碍TiO₂晶粒的生长；提高高温组织稳定性，改善粉体的表面织构特性；形成光生电子的浅势捕获陷阱，抑制e^-/h⁺复合，这些因素共同作用最终导致TiO₂/Gd₂O₃纳米粉体的光催化活性明显提高。XPS分析结果证实，掺杂Gd³⁺导致粉体的表面羟基含量降低。由于产生了量子尺寸效应，复合粉体的紫外吸收带边蓝移，光的吸收能力略有降低。     

电荷补偿对Ba2ZnGe2O7∶Bi3+荧光粉发光性质的影响

采用高温固相法制备了2个系列的荧光粉样品：Ba_2-xZnGe₂O₇∶xBi³⁺(系列Ⅰ)和Ba_1.994-yK_yZnGe₂O₇∶0.006Bi³⁺(系列Ⅱ)。X射线衍射(XRD)测试结果表明,少量Bi³⁺、K⁺的掺杂不会明显改变材料的物相结构。样品的荧光光谱测试结果表明,虽然2个系列样品的发光光谱都随组成成分变化有少量变化,但发光颜色基本上均为黄绿色。在358 nm的激发下,荧光粉的发射光谱呈现一个峰值在 500 nm 的宽发射带,归属于 ³P₁→^1S₀能级跃迁。在 500 nm 监测下,荧光粉的最强激发峰位于 358 nm,归属于¹S₀→³P₁能级跃迁,此外还有一个位于320 nm的肩峰归属于O^2--Bi³⁺电荷转移带。系列Ⅰ样品的光谱数据结果指出,Bi³⁺的最佳掺杂量x为0.006。在该基质中,Bi³⁺掺杂取代Ba²⁺属于不等价取代,会在晶格中产生Ba²⁺空位或间隙O^2-,对材料的发光强度产生负面影响。对此,采用K⁺与Bi³⁺协同掺杂起到电荷补偿的作用,填补Ba²⁺空位或捕获间隙O^2-缺陷。空位被填补或间隙被捕获均减少了晶格畸变,从而使发光强度明显提高。系列Ⅱ样品的光谱数据表明,完全电荷补偿的荧光粉样品相比于没有掺K⁺的样品,其发光强度提高了约2.5倍。     

邻二氮菲-Cd2+与DNA的相互作用研究

本文以邻二氮菲作为分子探针,在磷酸盐-氯化钠中性介质中(pH=7.2),用荧光光谱和吸收光谱法研究了邻二氮菲-Cd²⁺与DNA之间的相互作用。结果表明,Cd²⁺离子与邻二氮菲形成1∶2型的配合物,该配合物与DNA有较强的相互作用,这是位于配合物中心的Cd²⁺离子与DNA发生键合。实验发现,在邻二氮菲-Cd²⁺-DNA体系中加入EDTA或柠檬酸,邻二氮菲-Cd²⁺与DNA的相互作用减弱,这表明EDTA或柠檬酸对Cd²⁺的毒性有一定的缓解作用。     

萃取法研究Cu2+-dpx-PCA-体系配体间的芳环堆积作用及其配合物的组成

用萃取法测定Cu²⁺-dpx-PCA^-体系中的堆积百分数，其中dpx=2,2′-联吡啶胺(dpa)，2，2′-联吡啶甲烷(dpm)和2，2′-联吡啶酮(dpk); PCA^-=苯甲酸根(Bz^-), 2-苯乙酸根(PAc^-),3-苯丙酸根(PPr^-)和4-苯丁酸根(PBu^-)。结果表明：堆积百分数与羧酸根中亚甲基数有关，其顺序为Bz^---π电子协作效应的缘故。     

I-辅助构建具有优异吸附与光催化性能的类红细胞状Bi2WO6

通过简单的水热法,在I^-辅助的情况下,首次在不使用任何有机封端剂的情况下,获得了均匀的类红细胞状Bi₂WO₆。为了分析影响Bi₂WO₆形貌的前提条件,我们尝试改变I^-浓度、水热时间和温度,并提出可能的生长机理。I^-吸附在Bi₂WO₆纳米片的表面,以防止纳米片过度积聚并引导它们形成类红细胞的结构。独特的层状结构一方面增加了比表面积并提供了更多的反应位点,另一方面还提高了表面酸度并提高了吸附能力。     

过渡金属大环配合物的研究——Ⅱ.1,7-二氮杂-4,10-二硫杂-环十二烷过渡金属配合物的研究

本文报导了三种过渡金属氯化物(CuCl₂、CoCl₂、NiCl₂)和1,7-二氮杂-4,10-二硫杂-环十二烷([12]N₂S₂)的1:1配合物及其UV、IR、ESR和XPS等波谱特征。     

淋巴细胞膜上Na+/Ca2+交换操纵的Eu3+内流的荧光法研究

利用Fura-2荧光浓度指示剂法、通过检测360nm激发荧光强度的变化,研究了Eu³⁺能否利用人外周血淋巴细胞膜上的Na⁺/Ca²⁺交换进入细胞。结果表明:用ouabain预处理细胞无Na⁺介质中测试,当加入Eu³⁺时,360nm荧光强度发生猝灭,且随着胞外加入的Eu³⁺浓度的增大而猝灭增强。表明在实验条件下Eu³⁺可以进入细胞。电压依赖性Ca     

Thermal investigations of nitrate-hydrates and deuterates of Ca2+, Cd2+ and Mg2+

DTA and DSC were used to study the thermal behaviour of Ca(NO₃)₂·4H₂O, Cd(NO₃)₂·4H₂O, Mg(NO₃)₂·6H₂O and their deuterated analogues. Evidence was found concerning the process of melting of the initial hydrates and deuterates, followed by a one-stage dehydration of the melt to vield the respective anhydrous salt. T _m, ΔH _m ^o , ΔS _m ^o and ΔH _deh ^o were determined and the ΔH _f ^o values for the investigated hydrates were calculated from the ΔH _deh ^o data.

---

Zusammenfassung DTA und DSC wurden zur Untersuchung des thermischen Verhaltens von Ca(NO₃)₂·4H₂O, Cd(NO₃)₂·4H₂O, Mg(NO₃)₂·6H₂O und ihrer deuterierten Analoge eingesetzt. Man fand Aussagen bezüglich des Schmelzvorganges der Ausgangshydrate und Deuterate, gefolgt von einer Einschritt-Dehydratation der Schmelze unter Bildung der entsprechenden wasserfreien Salze. T _m, ΔH _m ^o , ΔS _m ^o und ΔH _deh ^o wurden ermittelt und die ΔH _f ^o Werte für die untersuchten Hydrate wurden anhand der ΔH _deh ^o berechnet.

     

Formation Constants And Metal To Ligand Ratios For Calcein Blue- Metal Complexes

Abstract

The formation constants of Calcein Blue-cadmium (II) and lead (II) complexes as well as their ligand to metal ratios were determined by a polarographic technique. The formation constants of Calcein Blue-copper (II) and silver (I) complexes as well as their ligand to metal ratios were determined by a potentiometric technique.     

Azo 8-hydroxyquinoline benzoate as selective chromogenic chemosensor for Hg and Cu

Azo 8-hydroxyquinoline benzoate (2) was synthesized and studied to detect metal ions. Distinct color change was found for compound 2 in the presence of transition metal ions Hg²⁺ or Cu²⁺ in CH₃CN, respectively, which makes it possible for distinguishing Hg²⁺ and Cu²⁺ from other metal ions by the ‘naked eye’.     

Comparison of Partial Least Squares Regression and H-Point Standard Addition Method for Simultaneous Spectrophotometric Determination of Zinc, Cobalt and Nickel by 1-(2-Pyridylazo)2-Naphthol in Micellar Media

Simultaneous spectrophotometric methods are described for the determination of Zn²⁺, Co²⁺ and Ni²⁺ by 1-(2-pyridylazo)2-naphthol (PAN) in micellar media, using absorbance correction-H-point standard addition method (HPSAM) and partial least squares (PLS) regression. The ligand and its metal complexes, i.e. Zn²⁺-PAN, Co²⁺-PAN and Ni²⁺-PAN, were made water-soluble by the neutral surfactant Triton X-100, and therefore extraction with organic solvents was no longer required. Formation of all of these complexes was complete within 10min at pH 9.2. The linear range was 0.1–1.5mgL^–1 for Zn²⁺, 0.1–2.0mgL^–1 for Co²⁺ and 0.1–2.0mgL^–1 for Ni²⁺. The relative standard deviation (RSD) for the simultaneous determination of 0.50mgL^–1 each of Zn²⁺, Ni²⁺ and Co²⁺ by applying the H-point standard addition method was 2.55%, 2.04% and 3.70%, respectively. The total relative standard error for applying the PLS method to 9 synthetic samples in the linear ranges of these metals was 1.8%. Interference effects of common anions and cations were studied, and both methods were applied to the simultaneous determination of Zn²⁺, Co²⁺ and Ni²⁺ in alloy samples.     

Characterization and application of humic acid modified carbon electrodes

Four routes for the modification of carbon electrodes with humic acids and the determination of three divalent metallic cations were studied. The determination of bound Fe²⁺, Cu²⁺ and Ni²⁺ was performed by cyclic and square wave voltammetry using either a batch or flow analysis system. Using the FIA system and SWV, linear relationships between the oxidation (or reduction) current and the cations concentration were obtained with the modified electrodes, while no signals were obtained for the same conditions for bare carbon electrodes. The system can be used to study the interaction between a wide range of electroactive cations and humic substances; however, the performance as an analytical tool is limited due to the high limits of detection (μM). However, some advantages like simplicity, short analysis time, inexpensive instrumentation needs and miniaturization capabilities are remarkable.     

A highly selective visual and fluorescent sensor for Pb2+ and Zn2+ and crystal structure of Cu2+ complex based-on a novel single-armed Salamo-type bisoxime

A novel single-armed Salamo-type bisoximes (H₄L) has been designed and synthesised. An obvious colour change from yellow (H₄L) to pale pink (HL-Pb²⁺) which can be visually observed by the naked eye in visible light. H₄L can act as a fluorescent sensor for ratiometric recognition of Zn²⁺ with high selectivity and sensitivity. Crystallographic data of the [Cu(HL)(μ-OAc)Cu] reveals that the two Cu²⁺ ions are both penta-coordinated with square pyramidal geometries, and forms a 2D supramolecular plane structure by hydrogen bonding interactions.     

电解液对全铅单液流电池电极性能的影响

研究Pb(II)和H+离子浓度对全铅单液流电池正、负电极在复合石墨基体上电化学行为的影响.结果表明,PbO2正极和Pb负极的电极过程受电化学和扩散混合控制.Pb(II)氧化沉积成PbO2时出现成核环,铅负极成核过电位小,充放电电压差远小于PbO2正极,电池极化主要来自PbO2正极.增加H+浓度有利于降低PbO2正极和Pb负极的极化,但析氧、析氢副反应和腐蚀加重.增大Pb(II)浓度有利于抑制析氧,但PbO2正极充电电压升高,充放电电压差增大.Pb(II)浓度较低时,充放电过程中PbO2沉积层少许脱落,充电电压进一步降低且更趋平稳.为此,电解液中HBF4浓度以2 mol L-1为宜,Pb(II)浓度应在0.9 mol L-1以上.     

Effect of Solvent on Competitive Bulk Membrane Transport of Transition and Post Transition Metal Cations Using Decyl-18-crown-6

A series of competitive metal ion transport experiments have been performed. Each involved transport from an aqueous source phase across an organic membrane phase into an aqueous receiving phase. The source phase contained equimolar concentrations of cobalt(II), nickel(II), cupper(II), zinc(II), cadmium(II), silver(I) and lead(II) metal cations. The membrane phase incorporated ionophore, decyl-18-crown-6. The membrane solvents include: chloroform, dichloromethane, 1,2-dichloroethane, nitrobenzene and chloroform–nitrobenzene binary solvents. A good transport efficiency and selectivity of Pb²⁺ transport from aqueous solutions are observed in this investigation. The selectivity order for competitive bulk liquid membrane transport of the studied transition and post transition metal cations through chloroform is: Pb²⁺>Co²⁺>Ni²⁺>Ag⁺>Cd²⁺, but in the case of dichloromethane, 1,2-dichloroethane and nitrobenzene as liquid membranes, the selectivity sequences were found to be: Pb²⁺>Co²⁺>Cd²⁺>Cu²⁺>Ag⁺>Ni²⁺>Zn²⁺, Pb²⁺>Co²⁺>Ag⁺>Ni²⁺>Zn²⁺ and Pb²⁺>Co²⁺>Ni²⁺>Zn²⁺>Cd²⁺>Ag⁺, respectively. The transport rate of the metal cations in chloroform–nitrobenzene binary solvents is sensitive to the solvent composition. The transport processes were studied in absence and presence of the stearic acid and the results show that the sequence of selectivities and ion transport rates change in the presence of stearic acid.