STUDIES ON THE BACTERIAL ACTIVITY OF COBALT(III) COMPLEXES. PART III. COBALT(III) CARBOXYLATE COMPLEXES

Abstract

Cobalt(III) complexes of the type [Co(en)₂(chel)]X.nH₂O where en = ethylenediamine, chel = phthalato = C₆H₄CO₂)^2? ₂, maleato = (O₂CCH = CHCO₂)^2?, succinato = (O₂CCH₂CH₂CO₂)^2?, homophthalato = (O₂CC₆H₄(CH₂)CO₂)^2?, citraconato = (O₂CC(CH₃) = CHCO₂)^2?, itaconato = (CH₂ = C(CO₂)CH₂CO₂)^2?, X = NO^? ₃, Br^?, (O₂CC₆H₄CO₂H)^?, (O₂CHC = CHCO₂H)^?, (O₂C(CH₂)₂CO₂H)^?, (O₂CC₆H₄(CH₂)CO₂H)^?, (O₂CHC = C(CH₂)-CO₂H)^?, and (O₂C-CH₂?C(= CH₂)-CO₂H)^?, [Co(en)₂(malonato)]X.2H₂O (where malonato = (O₂CCH₂CO₂)^2?, X = Cl^?, Br^?, and NO^? ₃) and [Co(en)₂CO₃]Cl.2H₂O have been investigated for their bacterial activity against Escherichia coli B growing on EMB agar and in minimal glucose media both in lag and log phases. Among the most active are where chel = phthalato and homophthalato. The effects are distinct from those known for compounds of Pt, e.g., cis?[Pt(NH₃)₂Cl₂] and rhodium, e.g., trans?[Rh(C₅H₅N)₄,Cl₂].6H₂O. Antagonisms are reported.     

Supramolecular inclusion of a pillared double-layered host by an anion-directed second-sphere coordination

In this paper, we have illustrated the utilisation of a second-sphere coordination approach to construct supramolecular inclusion solids with varieties of guest molecules. A flexible molecule N,N,N′,N′-tetra-p-methylbenzyl-ethylenediamine (L1) bearing doubly protonated H-bond donors was designed, capable of forming N–H…Cl hydrogen bonds with a crystallographically unique chloride anion, to construct an anion-directed ligand. The pillared double-layered host framework was constructed by an anion-directed ligand and primary coordination sphere [CoCl₄]^2 ?  through weak C–H…Cl hydrogen-bonding interactions. A variety of guest molecules, such as p-anisaldehyde, 1,4-dimethoxy-2,5-bis(methoxymethyl)benzene, can be included, leading to the formation of novel supramolecular inclusion solids: [L1]·4[H]⁺·[CoCl₄]^2 ? ·2Cl^? ·1.5[C₈H₈O₂]·0.25[CH₃OH] (1) and [L1]·4[H]⁺·[CoCl₄]^2 ? ·2Cl^? ·1.5[C₁₂H₂₀O₄]·0.5[CH₃OH] (2).

We have presented herein the utilisation of a second-sphere coordination approach to construct supramolecular inclusion solids with a variety of guest molecules. A novel type of a pillared double-layered host framework was constructed by a second-sphere coordination between the anion-directed ligand (L1 = N,N,N′,N′-tetra-p-methylbenzyl-ethylenediamine) and [CoCl₄]^2 ?  through weak C–H…Cl hydrogen-bonding interaction, and a variety of guest molecules, such as p-anisaldehyde, 1,4-dimethoxy-2,5-bis(methoxymethyl)benzene, can be included, leading to the formation of supramolecular inclusion solids: [L1]·4[H]⁺·[CoCl₄]^2 ? ·2Cl^? ·1.5[C₈H₈O₂]·0.25[CH₃OH] (1) and [L1]·4[H]⁺·[CoCl₄]^2 ? ·2Cl^? ·1.5[C₁₂H₂₀O₄]·0.5[CH₃OH] (2)

     

NMR and kinetic studies of the interactions of [Au(cis-DACH)Cl2]Cl and [Au(cis-DACH)2]Cl3 with potassium cyanide in aqueous solution

The interactions of [Au(cis-DACH)Cl₂]Cl and [Au(cis-DACH)₂]Cl₃ [where cis-DACH is cis-1,2-diaminocyclohexane] with enriched KCN were carried out in CD₃OD and D₂O, respectively. The reaction pathways of these complexes were studied by ¹H, ¹³C, ¹⁵N NMR, UV spectrophotometry, and electrochemistry. The kinetic data for the reaction of cyanide with [Au(cis-DACH)₂]Cl₃ are k = 18 M^?1s^?1, ?H^≠ = 11 kJ M^?1, ?S^≠ = ?185 JK^?1 M^?1, and E_a = 13 kJ M^?1 with square wave voltammetric (SWV) peak +1.35 V, whereas the kinetic data for the reaction of cyanide ion with [Au(cis-DACH)Cl₂]Cl are k = 148 M^?1s^?1, ?H^≠ = 39 kJM^?1, ?S^≠ = ?80 JK^-1 M^?1, and E_a = 42 kJM^?1 along with SWV peak +0.82 V, indicating much higher reactivity of [Au(cis-DACH)Cl₂]Cl toward cyanide than [Au(cis-DACH)₂]Cl₃. The interaction of these complexes with potassium cyanide resulted in an unstable [Au(¹³CN)₄]^? species which readily underwent reductive elimination reaction to generate [Au(¹³CN)₂]^? and cyanogen.     

CO2/H2S corrosion behavior of tubular steel SM 80SS in Cl−-containing solution in the absence or presence of Ca2+ and Mg2+

CO₂/H₂S corrosion behavior of tubular steel SM 80SS have been investigated utilizing electrochemical measurement technology, weight loss test, scanning electron microscope (SEM) and X-ray diffraction (XRD). The results showed that temperature increased the corrosion rate and changed the corrosion mechanism of tubular steel SM 80SS. Cl^? quickened the anodic dissolution and increased the corrosion rate of tubular steel SM 80SS. Furthermore, the addition of Ca²⁺ and Mg²⁺ resulted in the corrosion products changing from crystalline FeCO₃ to amorphous Fe(Ca,Mg)(CO₃)₂ and serious corrosion under scale of tubular steel SM 80SS.     

Molecular self-modification: homolog of a manganese laundry bleach catalyst oxidatively transforms its tetradentate ligand into a novel hexadentate derivative

On the basis of mass spectral studies alone, the relatively new manganese complex, Mn(Et₂EBC)Cl₂ (Et₂EBC = 4,11-diethyl-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane), a homolog of the well proven, peroxide-based laundry bleach, Mn(Me₂EBC)Cl₂, has been reported to undergo a sequence of 2-electron oxidation steps, ultimately converting its ethyl groups into chelated ethoxo and methylene carboxylato groups, [Mn^IV{(^?OCH₂CH₂)(^?O₂CCH₂)}EBC)](PF₆)₂. We report here the isolation and characterization of that unusual product, and provide insight into the remarkable catalytic pathway to its formation. At temperatures above 0 °C, oxidation by aqueous H₂O₂ reliably transforms Mn(Et₂EBC)Cl₂ into [Mn^IV{(^?OCH₂CH₂)(^?O₂CCH₂)}EBC)]²⁺. The experimental data for this intramolecular ethyl group transformation is consistent with oxygen insertion into a methyl C?CH moiety of the ethyl group, ?CNCH₂C(?CH)H₂, by the Mn^IV?COOH functional group.     

Ni(II) and Co(II) complexes with 2,4-dichlorophenoxyacetic acid and 2-(2,4-dichlorophenoxy)-propionic acid

Nickel(II) and cobalt(II) complexes with the commercial herbicides 2,4-dichlorophenoxyacetic acid (2,4D; C₈H₆O₃Cl₂) and 2-(2,4-dichlorophenoxy)-propionic acid (2,4DP; C₉H₈O₃Cl₂) were prepared and characterized. On the basis of the results of elemental analysis and Ni and Co determination, the following molecular formulae were proposed for the obtained compounds: Ni(C₈H₅O₃Cl₂)₂·6H₂O, Co(C₈H₅O₃Cl₂)₂·6H₂O, Ni(C₉H₇O₃Cl₂)₂·2H₂O and Co(C₉H₇O₃Cl₂)₂·2H₂O. X-ray powder analysis was carried out. The IR, electronic (VIS) spectra and conductivity data were discussed. Water solubility of the synthesized complexes at room temperature was examined. Thermal decomposition of the compounds was studied. Dehydration processes occur during heating in air. The anhydrous compounds decompose via different intermediate products to oxides. TG/MS studies indicate formation of gaseous mass fragments of decomposition including H₂O⁺, OH⁺, CO₂ ⁺, HCl⁺, Cl₂ ⁺, CH₃Cl⁺, CH₂O⁺, C₆H₆ ⁺ and other. This revised version was published online in August 2006 with corrections to the Cover Date.     

Effect of collision gas pressure and collision energy on reactions between oxygen and the negative molecular ion of tetrachlorodibenzo-p-dioxins in the collision cell of a triple -quadrupole mass spectrometer

Low-energy reactive collisions between the negative molecular ion of a tetrachlorodibenzo-p-dioxin (TCDD) and oxygen inside the collision cell of a triple-stage quadrupole mass spectrometer produce a substitution ion [M ? Cl + O]^?, a phenoxide ion [C₆H_4-nO₂Cl_n]^?·, [M ? HCl]^?·, and Cl^? by which 1,2,3,4-, 1,2,3,6/1,2,3,7- and 2,3,7,8-TCDD isomers can be distinguished either directly or on the basis of intensity ratios. The collision conditions have an important effect on the relative abundances. Energy- and pressure-resolved curves show that the ions formed by a collisionally activated reaction (CAR) process, i.e. [M ? Cl + O]^? and [C₆H_4-n,O₂Cl_n]^?·, are favoured by a high pressure of oxygen (3-6 mTorr) (1 Torr = 133.3 Pa) and a low collision energy (0.1-7 eV), whereas the ions formed by a collisionally activated dissociation (CAD) process, i.e. [M ? HCl]^?· and Cl^?, are favoured by high pressure and high energy. By choosing a relatively low collision energy (5 eV) and high pressure (4 mTorr), the CAR and CAD ions can be clearly detected.     

Synthesis and electropolymerization of EDOT modified 1,3-bis(5-methyl-2-thiazolylimino)isoindolinato palladium(II) complex for electrochemical detection of hydrogen peroxide

1,3-Bis(5-methyl-2-thiazolylimino) isoindoline derivative (EDOT-BTI) containing an electropolymerizable group is prepared using the Linstead method. According to this two-step method phthalonitrile derivative EDOT-Pht is converted to 1,3-diiminoisoindoline EDOT-DII first then EDOT-DII is reacted with 2-amino-5-methylthiazole in ethanol during 5 day reflux. Palladium(II) complex (EDOT-PdBTI) of EDOT-BTI is synthesized in benzene using [Pd(PhCN)₂Cl₂] as the palladium(II) precursor and triethylamine as auxiliary base. In order to show the H₂O₂ sensing properties of EDOT-PdBTI, electrochemical characterizations of EDOT-BTI and EDOT-PdBTI are performed and then modified glassy carbon electrode is constructed with electropolymerization of EDOT-PdBTI. GCE/PEDOT-PdBTI shows a wave at 0.215 V. With increasing H₂O₂ concentration, this wave shifts to ?0.075 V. A linear range is observed between 0.72 and 13.6 μmol dm^?3 with a limit of detection of 0.21 μmoldm^?3 and sensitivity of 0.0153 mV μmol^?1 dm^?3. These data illustrate possible use of the electrode as a potentiometric H₂O₂ sensor.     

Characterization of a Layered Methylene Blue/Vanadium Oxide Nanocomposite and its Application in a Reagentless H2O2 Biosensor

Layered nanocomposite of methylene blue (MB)-intercalated vanadium oxide was obtained through a simple hydrothermal synthesis method using MB, V₂O₅, and NaI as starting materials. The intercalation reaction was proven to be successful using X-ray diffraction pattern. The MB-V₂O₅ nanocomposite was characterized using a scanning electron micrograph, infrared spectra, thermogravimetric analysis, UV spectra, and electrochemical measurements. The intercalated MB cations showed a fine diffusion-controlled electrochemical redox process and facilitated the immobilized horseradish peroxidase’s (HRP) good catalytic reduction upon H₂O₂. The as-prepared MB-V₂O₅/HRP biosensor showed a linear response to H₂O₂ over a range from 2.0?×?10^?6 to 9.5?×?10^?5 M with a detection limit of 9.7?×?10^?7 M (S/N ratio?=?3).     

Aqueous Reactive Oxygen Species Induced by He + O<Subscript>2</Subscript> Plasmas: Chemistry Pathways and Dosage Control Approaches

Plasma–liquid interaction has already been a hotspot in the research field of plasma medicine. Aqueous reactive oxygen species (ROS) generated in this process are widely accepted playing a crucial role in plasma biomedical effects. In this paper, chemistry pathways among various aqueous ROS induced by He + O₂ plasmas are investigated by a numerical model. Simulation results show that these aqueous ROS can be classified into two groups according to their production ways: the group of species including O, ¹O₂ and e directly produced in plasma, and the other group of species including O₂ ^?, H₂O₂, O₃, etc. produced by liquid reactions. A key reaction chain of e → O₂ ^? → HO₂(→ HO₂ ^?) → H₂O₂ is found to be important in the plasma-induced liquid chemistry. Furthermore, impacts of changes in plasma and solution conditions on aqueous ROS concentrations are studied as well. It is found that changes in plasma conditions (O₂ ratio in the discharge gas/power density) can globally influence the concentrations of almost every aqueous ROS, while conditions changes of the treated liquid (pH/dissolved oxygen) only partially influence the concentrations of some specific species including O₂ ^?/HO₂, O₃ ^?/HO₃ and H₂O₂. The revelations of the liquid chemistry pathways and the dependence of ROS dosage on the treatment conditions offer a better understanding on the plasma–liquid interactions, as well as provide optimized dosage control approaches for biomedical applications.     

Steam pre-reforming of natural gas over nanostructured Ni/12CaO–7Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst for hydrogen production: effect of support preparation method

Calcium aluminate (12CaO–7Al₂O₃) powder was synthesized using three methods, viz. Pechini, coprecipitation, and a new novel facile decomposition route starting from activated alumina and calcium nitrate precursors, then used as a support to prepare a series of 31 wt%Ni/12CaO–7Al₂O₃ catalysts by deposition–precipitation method. The resultant catalysts were tested in steam pre-reforming of natural gas at 400–550 °C, low steam-to-carbon (S/C) molar ratio of 1.5, and atmospheric pressure. The obtained samples were characterized by Brunauer–Emmett–Teller (BET) analysis, scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, temperature-programmed reduction (TPR), temperature-programmed oxidation (TPO), hydrogen chemisorption, and CO₂–temperature-programmed desorption (TPD). Experimental results showed that the basicity and morphology of the supports depended significantly on the synthesis method. Calcium aluminate synthesized using the new decomposition procedure showed surface area of 6.23 m² g^?1, while the surface area of those prepared by the Pechini and coprecipitation method were 1.38 and 3.76 m² g^?1, respectively. The catalytic properties of the 31 wt%Ni/12CaO–7Al₂O₃ catalysts were strongly influenced by the support preparation approach. The highest specific surface area (about 230 m² g^?1), smallest Ni particle size (8.86 nm), and highest nickel dispersion (7.48%) were observed for the catalyst whose support was synthesized by the decomposition method. Even at high gas hourly space velocity (GHSV) of 2 × 10⁵ mL \({\text{g}}^{ - 1}_{\text{catalyst}}\) h^?1, this catalyst exhibited around 100% C₂H₆ and C₃H₈ conversion at temperature above 500 °C. High catalytic stability during 60 h time on-stream was also shown. The TPO profiles of the spent catalyst demonstrated high resistance to carbon formation.     

Preparation and characterization of H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>/ZrO<Subscript>2</Subscript> catalyst for carbonation of methanol into dimethyl carbonate

A H₃PW₁₂O₄₀/ZrO₂ catalyst for effective dimethyl carbonate (DMC) formation via methanol carbonation was prepared using the sol–gel method. X-ray photoelectron spectra showed that reactive and dominant (63%) W(VI) species, in WO₃ or H₂WO₄, enhanced the catalytic performances of the supported ZrO₂. The mesoporous structure of H₃PW₁₂O₄₀/ZrO₂ was identified by nitrogen adsorption–desorption isotherms. In particular, partial sintering of catalyst particles in the duration of methanol carbonation caused a decrease in the Brunauer–Emmett–Teller surface area of the catalyst from 39 to 19 m²/g. The strong acidity of H₃PW₁₂O₄₀/ZrO₂ was confirmed by the desorption peak observed at 415 °C in NH₃ temperature-programmed desorption curve. At various reaction temperatures (T?=?110, 170, and 220 °C) and CO₂/N₂ volumetric flow rate ratios (CO₂/N₂?=?1/4, 1/7, and 1/9), the calculated catalytic performances showed that the optimal methanol conversion, DMC selectivity, and DMC yield were 4.45, 89.93, and 4.00%, respectively, when T?=?170 °C and CO₂/N₂?=?1/7. Furthermore, linear regression of the pseudo-first-order model and Arrhenius equation deduced the optimal rate constant (4.24?×?10^?3 min^?1) and activation energy (E_a?=?15.54 kJ/mol) at 170 °C with CO₂/N₂?=?1/7 which were favorable for DMC formation.     

Removal of multiple pollutants from water using noble Ag/Au/magnetite/graphene/H2O2 system under light and ultrasound irradiation

Ag/Au/Fe₃O₄/graphene composites prepared by a hydrothermal method demonstrated excellent activation of H₂O₂ and were used to degrade methylene blue (MB) in solution in the presence of organic acids and inorganic ions under light and ultrasound irradiation. The physicochemical properties of the obtained composites were characterized using various methods. The results showed that the composites exhibited excellent magnetic properties, crystallinity, and stability. The results of catalysis experiments revealed that the removal efficiency of MB increased when Ag and Au were both incorporated into the Fe₃O₄/graphene/H₂O₂ system compared with the removal efficiency achieved with separate Ag-Fe₃O₄/graphene/H₂O₂ and Au-Fe₃O₄/graphene/H₂O₂ systems, indicating a substantial synergistic interaction between the two metallic nanoparticles and the Fe₃O₄/graphene/H₂O₂ systems. The presence of an organic acid accelerated degradation of the MB/H₂O₂ system, whereas almost all of the investigated anions inhibited the degradation of MB; their inhibition effects followed the order CO₃^2? > NO₃^? > Cl^? > F^? > H₂PO₄^? > SO₄^2? > I^?. Cations of Na⁺, K⁺, Ca²⁺, and Mg²⁺ also suppressed MB degradation, likely because of the influence of Cl^? coexisting in the solutions.     

Supercapacitors based on carbide-derived carbons synthesised using HCl and Cl2 as reactants

Micro- and mesoporous carbide-derived carbons (CDCs) were synthesised from TiC powder via a gas-phase reaction using HCl and Cl₂ within the temperature range of 700–1,100 °C. Analysis of X-ray diffraction results show that TiC-CDCs consist mainly of graphitic crystallites. The first-order Raman spectra showed the graphite-like absorption peaks at ~1,577 cm^?1 and the disorder-induced peaks at ~1,338 cm^?1. The low-temperature N₂ sorption experiments were performed, and specific surface areas up to 1,214 and 1,544 m²?g^?1 were obtained for TiC-CDC (HCl) synthesised at T?=?800 °C and TiC-CDC (Cl₂) synthesised at T?=?900 °C, respectively. For the TiC-CDC powders synthesised, a bimodal pore size distribution has been established with the first maximum in the region up to 1.5 nm and the second maximum from 2 to 4 nm. The energy-related properties of supercapacitors based on 1 M (C₂H₅)₃CH₃NBF₄ in acetonitrile and TiC-CDC (Cl₂) and TiC-CDC (HCl) as electrode materials were also investigated by cyclic voltammetry, impedance spectroscopy, galvanostatic charge/discharge and constant power methods. The specific energy, calculated at U?=?3.0 V, are maximal for TiC-CDC (Cl₂ 800 °C) and TiC-CDC (HCl 900 °C), which are 43.1 and 31.1 W?h?kg^?1, respectively. The specific power, calculated at cell potential U?=?3.0 V, are maximal for TiC-CDC (Cl₂ 1,000 °C) and TiC-CDC (HCl 1,000 °C), which are 805.2 and 847.5 kW?kg^?1, respectively. The Ragone plots for CDCs prepared by using Cl₂ or HCl are quite similar, and at high power loads, the TiC-CDC material synthesised using Cl₂ at 900 °C, i.e. the material with optimal pore structure, delivers the highest power at constant energy.     

2(S)‐Amino‐3‐[1H‐imidazol‐4(5)‐yl]­propyl cyclo­hexylmethyl ether di­hydro­chloride and 2(S)‐amino‐3‐[1H‐imidazol‐4(5)‐yl]­propyl 4‐bromo­benzyl ether di­hydro­chloride

(Cyclo­hexyl­methyl­oxy­methyl)(1H‐imidazol‐4‐io­methyl)‐(S)‐ammonium dichloride, C₁₃H₂₅N₃O⁺·2Cl^?, and (4‐bromo­benzyl)(1H‐imidazol‐4‐io­methyl)‐(S)‐ammonium dichloride, C₁₃H₁₈BrN₃O⁺·2Cl^?, are model compounds with different biological activities for evaluation of the hist­amine H3‐receptor activation mechanism. Both title compounds occur in almost similar extended conformations.     

Syntheses, characterization and ethylene polymerization of half-sandwich group IV metal complexes with tridentate [O,N,S] ligands

A series of half-sandwich group IV metal complexes with tridentate monoanionic phenoxy-imine arylsulfide [O NS] ligand [2-Bu t 4-Me-6-((2-(SC 6 H 5)C 6 H 4 N = CHC 6 H 2 O)](La) and dianionic phenoxy-amine arylsulfide [O N S] ligand [2-Bu t 4-Me-6-((2-(SC 6 H 5)C 6 H 4 N-CH 2 C 6 H 2 O)] 2(Lb) have been synthesized and characterized.Lb was obtained easily in high yield by reduction of ligand La with excess LiAlH 4 in cool diethyl ether.Half-sandwich Group IV metal complexes CpTi[O NS]Cl 2(1a),CpZr[O NS]Cl 2(1b),CpTi[O N S]Cl(2a),CpZr[O N S]Cl(2b) and Cp * Zr[O N S]Cl(2c) were synthesized by the reactions of La and Lb with CpTiCl 3,CpZrCl 3 and Cp * ZrCl 3,and characterized by IR,1 H-NMR,13 C-NMR and elemental analysis.In addition,an X-ray structure analysis was performed on ligand Lb.The title Group IV half-sandwich bearing tridentate [O,N,S] ligands show good catalytic activities for ethylene polymerization in the presence of methylaluminoxane(MAO) as co-catalyst up to 1.58 × 10 7 g-PE.mol-Zr 1.h 1.The good catalytic activities can be maintained even at high temperatures such as 100 ℃ exhibiting the excellent thermal stability for these half-sandwich metal pre-catalysts.     

Thermal properties of sulfonic acid group functionalized Brönsted acidic ionic liquids

Thermal decomposition onset temperatures have been measured for a total of 24 methylimidazolium, triethanolammonium, and pyridinium type sulfonic acid groups functionalized Brönsted acidic ionic liquids with Cl^?, Br^?, SO₄ ^2?, PO₄ ^3?, BF₄ ^? _, CH₃CO₂ ^?, and CH₃SO₃ ^? anions, using thermogravimetric analysis. Thermal stabilities of these sulfonic acid group functionalized ionic liquids decreases in the order, methylimidazolium > triethanolammonium > pyridinium. The methylimidazolium, pyridinium, and triethanolammonium ionic liquids investigated showed decomposition onset temperatures (air) in the 213–353, 167–240, and 230–307 °C ranges, respectively. Additionally, the decomposition temperatures of these ionic liquids are highly dependent on the nature of the anion.     

Carbon dioxide and methane adsorption at high pressure on activated carbon materials

Granular and monolith carbon materials were prepared from African palm shell by chemical activation with H₃PO₄, ZnCl₂ and CaCl₂ aqueous solutions of different concentrations. Adsorption capacity of carbon dioxide and methane were measured at 298 K and 4,500 kPa, and also of CO₂ at 273 K and 100 kPa, in a volumetric adsorption equipment. Correlations between the textural properties of the materials and the adsorption capacity for both gases were obtained from the experimental data. The results obtained show that the adsorption capacity of CO₂ and CH₄ increases with surface area, total pore volume and micropore volume of the activated carbons. Maximum adsorption values were: 5.77 mmol CO₂ g^?1 at 273 K and 100 kPa, and 17.44 mmol CO₂ g^?1 and 7.61 mmol CH₄ g^?1 both at 298 K and 4,500 kPa.     

Synthesis, spectral and thermal studies of new copper (II) complexes with 1,2-di(imino-2-aminomethylpyridil)ethane

New copper (II) complexes of Schiff bases with 1,2-di(imino-2-aminomethylpyridil)ethane with the general composition CuLX _m (H₂O) _x , [L = Schiff base, X = Cl^?, Br^?, NO₃ ^?, ClO₄ ^?, CH₃COO^?, m = 2; X = SO₄ ^2?, m = 1] were prepared by template synthesis. The complexes were characterized by elemental analysis, conductivity measurements, magnetic moments, IR, UV–VIS and EPR spectra. The thermal behavior of complexes was studied using thermogravimetry (TG), differential thermal analysis (DTA) and differential scanning calorimetry (DSC). Infrared spectra of all complexes are in good agreement with the coordination of a neutral tetradentate N₄ ligand to the cooper (II) through azomethinic and pyridinic nitrogen. Magnetic, EPR and electronic spectral studies show a monomeric distorted octahedral geometry for all Cu(II) complexes. Conductance measurements suggest the non-electrolytic nature of the compounds, except for copper (II) nitrate and perchlorate complexes which are 1:2 electrolytes. Heats of decomposition, ΔH, associated with the exothermal effects were also determined.     

Feasibility of a Two-Step Culture Method to Improve the CO2-Fixing Efficiency of Nonphotosynthetic Microbial Community and Simultaneously Decrease the Spontaneous Oxidative Precipitates from Mixed Electron Donors

When compared with H₂, mixed electron donors (MED), comprising S^2?, S₂O₃ ^2?, and NO₂ ^?, could generally improve the CO₂-fixing efficiency of nonphotosynthetic microbial communities (NPMCs). However, a large amount of abiotic precipitates combined with bacteria produced during culture may be unfavorable for the recycling and reuse of bacteria. The main component of the abiotic precipitates is S⁰, which influences the enrichment and reuse of bacteria but is not conducive for CO₂ fixation in the subsequent step. In this study, a two-step culture method (TSCM), employing H₂ and MED, respectively, was verified to be feasible for improving the CO₂-fixing efficiency of NPMCs in the second step. In the TSCM, the net-fixed CO₂ increased to 854 mg/L and abiotic precipitates were not produced in the medium. Sequence analysis of 16 s rDNA from NPMC indicated the presence of microbial symbioses in the NPMC, supporting the possible applications of TSCM.