On the properties of alpha-glucosidase and the binding of glucose to the enzyme.

An alpha-glucosidase was purified from baker's yeast. The molecular weight was approximately 44 000 daltons. SDS-disc gel electrophoresis suggested that the enzyme consisted of four subunits. The isoelectric point was at pH 5.4. The Km values for p-nitrophenyl alpha-D-glucopyranoside and maltose were 2.9 X 10(-4) and 2.5 X 10(-2) M, respectively. Binding of 2-(p-toluidino)naphthalene-6-sulfonate to the alpha-glucosidase was associated with a strong increase in fluorescence. The dissociation constant of the enzyme-TNS complex was 8 X 10(-5) M. The fluorescent probe did not interfere with the binding of glucose to the enzyme although the alpha-glucosidase was inhibited by high concentrations of TNS. The formation of an enzyme-glucose complex was indicated by an increase of fluorescence and by a shift in the wavelength for maximal emission which suggests that the binding process is associated with a change in conformation. The dissociation constant of the glucose--alpha-glucosidase complex KD = 0.57 X 10(-3) M, was calculated from the increase in fluorescence as a function of glucose concentration.     

Construction of the Skeleton of Phthalascidin, Mechanism of the Formation of the Key Tricyclic Lactam Intermediate

Phthalascidin is a structurally simplified version of Et-743, which is a potent anti-tumor marine natural product isolated from Ecteinascidia turbinata. Its antiproliferative activity is greater than that of the agents taxol, camptothecin, adriamycin, mitomycin C, cisplatin, bleomycin, and etoposide by 1-3 orders of magnitude. An elegant synthesis of Et-743 and phthalascidin has been reported by E. J. Corey and co-workers1,2. As part of our continuing program, we have also engaged in dev…     

Results obtained from the group study on the clinical efficacy of SPECT of the liver

The influence of SPECT over the detectability of SOL in the liver was evaluated by the Subcommittee on Efficacy Study, which belongs to Medical and Pharmaceutical Committee of Japan Radioisotope Association, under the participation of 9 hospitals including some university hospitals. In this study segmental reading of the SOL was requested. The film reading was performed twice on the different patient-groups and the results from well-experienced doctors (11 doctors) were summarized, indicating a slight increase in sensitivity as a whole although there were some doctors showing a reverse effect in each performance. Sensitivity was determined in the patient-group without SOL, which showed a slight decrease as a whole, indicating that SPECT had some possibility of increasing false positive cases. In the study of SOL detectability based on its segmental location, a marked positive effect of SPECT was noted in the right anterior and right posterior segments whereas a marked negative effect in the left lateral segment. The left medial segment also showed a slight decrease in the detectability of SOL.     

Understanding the importance of the viscosity contrast between the sample solvent plug and the mobile phase and its potential consequence in two-dimensional high-performance liquid chromatography

The effect of solvent viscosity mismatch on elution performance in reversed-phase HPLC was studied using moment analysis. Two conditions were tested: (1) the mobile phase viscosity was less than the injection plug viscosity, and (2) the mobile phase viscosity was greater than the injection plug viscosity. Under the first condition, retention time and elution performance decreased as the viscosity contrast between the mobile phase and injection plug increased. The effect on performance was more marked as the injection volume increased. A decrease in performance of 12% for compounds with retention factors up to 2.8 was apparent even when the viscosity contrast was only 0.165 cP. In the second set of conditions, elution performance was actually observed to increase, by as much as 25% for a 40 μL injection, as the viscosity contrast between the mobile phase and the solute plug increased. No change in the retention factor was observed. This behaviour was attributed to the shape of an injection plug as it enters into the column, whereby a low viscosity plug permeates away from the wall when the column contains a higher viscosity mobile phase, and vice a versa for a high viscosity plug entering a low viscosity mobile phase. At no stage was either a band splitting or shoulders observed with viscosity contrasts up to 1.283 cP, as could have been expected.     

胶囊中铬的测定方法研究

通过对比不同的前处理措施,建立准确、快速测定胶囊中铬（Cr）的方法。分别采用微波消解和电热恒温自动消解法进行前处理,石墨炉原子吸收法进行测定。试验表明：该方法在0~40.0μg/L范围内呈线性相关,相关系数为0.997 7,检出限为0.017 mg/kg,样品的加标回收率在90%~110%之间。对标准物质圆白菜中铬的测定在所要求的准确度范围之内。同时作了原子吸收光谱仪和电感耦合等离子体（ICP）发射光谱仪两种仪器的对照试验,方法的稳定性良好。采用微波消解或电热恒温消解作为胶囊的前处理,通过原子吸收法或ICP法均能准确测定胶囊中的铬。     

Probing the role of the mycosamine C2'-OH on the activity of amphotericin B

A synthetic route to a mycosamine donor was designed and provided access to a set of AmB derivatives targeted to probe the effect of the C2'-OH. It was determined that the configuration of the C2'-position is inconsequential but that O-methylation of this alcohol was deleterious to its mode of action. Additionally, the analog incorporating a mycosamine derivative from the enantiomeric series was devoid of activity.     

Influence of the morphology of samples in the pyrolysis of PVC

PVC was used as a model substance to study the dependence of thermal measurement data on the preparation and morphological characteristics of samples The PVC treated was a commercially available suspension polymer, Ongrovil S 155, produced by the Borsodi Vegyi Kombinát. The whole thermal process was followed by TG and DTG measurements in air and argon atmospheres by means of a Du Pont 990 Thermoanalyzer. Evolved-gas analysis was performed with a home-made apparatus. Pyrolysis gas chromatography was accomplished using a Hamilton type pyrolyzer and a Carlo Erba Chromatograph furnished with a flame ionization detector. The investigations showed benzene and other components to be evolved from the initial polymer and an alteration depending on the morphological characteristics of the samples. This was suggested to be due to the different mechanisms of thermal degradation of the PVC.     

Effect of the size of the charged group on the properties of alkoxylated NFCs

The impact of the size of the charged group on the properties of alkoxylated NFC was studied by two chloroalkyl acid reagents. It was found that the employment of the larger 2-chloropropionic acid reagent leads to improved properties, e.g. higher fraction of nano-sized materials, and significantly better redispersion as compared to when the smaller monochloroacetic acid was employed. The differences in the impacts of the different reagents were hypothesized to be due to a more efficient disruption of the cohesion between the nanofibrils when a larger charged group was employed.     

BSA denaturation in the absence and the presence of urea studied by the iso-conversional method and the master plots method

The effect of cure temperature and modifier proportion on the miscibility of an epoxy–amine system with a thermoplastic modifier was studied by analysis of phase diagrams, morphologies, and glass transitions. Phase diagrams for the system before and during reaction were obtained from a thermodynamic analysis of phase separation using a model based on Flory–Huggins theory. Different types of morphologies were observed and analyzed in function of cure temperature and modifier proportion. The validity of the thermodynamic model was checked by comparing with observed morphologies. Two glass transitions were observed for most of the modified systems indicating that a phase separation was occurred.     

A study of the fractal structure of the precipitate and the mechanism of its formation from the gallbladder bile of a patient

The precipitation of three kinds of structures from gallbladder bile of a patient, fractal structure, regular crystal structure, and small disperse granules, was observed in the same sample using Field Emission Gun-Scanning Electron Microscopy (FEG-SEM). The results indicated that there was a transition from a linear equilibrium system to a nonlinear and nonequilibrium system, which was discussed using the theory of entropy. The chemical compositions of these three different kinds of precipitates were determined by energy dispersive X-ray spectroscopy (EDS). This experimental result revealed that Na and Cl played important roles in the formation of the fractal and crystal structures. Besides, the Aggregation-Diffusion-Fractal (ADF) model was used to explain the growth mechanism of the fractal. The article is published in the original.     

Theory versus Practice in the Twentieth-Century Search for the Ideal Anaesthetic Gas

At the beginning of the twentieth century, an anaesthetist could choose between nitrous oxide, chloroform, and ether (diethyl ether) for the induction of painrelieving unconsciousness. By the end of century, the choice was between a small number of fluorinated aliphatic ethers such as Enflurane, Desflurane, and Sevoflurane, and (in some jurisdictions) the rare gas, xenon. Between these endpoints researchers had identified a surprisingly broad range of hydrocarbons, noble gases, organohalogens, and aliphatic ethers that possessed anaesthetic properties. None was entirely satisfactory, but clinicians at various times and in various places employed substances in each of these categories. Behind the search for new anaesthetic gases was a theory of action (Meyer- Overton theory) that was known to be inadequate, but as no alternative was strong enough to displace it the search continued on purely empirical grounds, while lip-service was paid to the theory. By the time a theory couched in more modern terms was proposed, a suite of modern anaesthetic gases was in place, and there have been no attempts to use that theory to drive a new search.     

From the Leiden jar to the discovery of the glass electrode by Max Cremer

The discovery of the glass electrode by Max Cremer was possible because of the advances made in the nineteenth century in understanding the electrical properties of glass, and because of the studies of electrical potential drops at the interface of phases. The discovery of the Leiden jar by E. G. von Kleist and the follow-up studies of the properties of that capacitor disclosed that glass is a dielectric. Much later, the ionic conductivity of glass was noticed and studied by J. H. Buff, W. von Beetz, W. Thomson (Baron Kelvin of Largs), W. Giese, H. L. F. von Helmholtz, E. Warburg, etc. It needed also the discovery of electromotive forces due to the partition of mobile ions (charge separation) by W. Nernst and E. H. Riesenfeld to pave the way for the idea that ion partition also occurs at solid–solution interfaces producing electromotive forces (emf). At the beginning of the twentieth century, the ground was laid to expect that a very thin glass membrane may produce an electromotive force because the glass has a finite ionic conductivity and ion partition may cause an emf. It obviously needed a physiologist like Max Cremer who desired to mimic a cell membrane (a semipermeable membrane), to use a glass membrane for that purpose. Cremer’s congenial choice of a thin glass bulb was rooted in a thorough understanding of the origin of electromotive forces, and it was not initiated directly by the Giese-Helmholtz cell, as some later reviews suggested. Later Cremer realized that an emf builds up when aqueous solutions are separated by a thin glass membrane. Cremer’s discovery was picked up by F. Haber who developed the glass electrode together with his PhD student Z. Klemensiewicz as an analytical tool. The following decades have brought improvements of the glasses and measuring techniques, and a deeper insight into the functioning of the glass electrode. Here, it will be shown that full credit for the discovery of the glass electrode effect must be given to Max Cremer. Unfortunately, his role has not been adequately described so far, mainly because Haber dominated the literature.     

Increase of the photosensitizing efficiency of the Bacteriochlorin a by liposome-incorporation

To describe the action mechanisms of Bacteriochlorin a (BCA), a second generation photosensitizer, in phosphate buffer (PB) and in dimyristoyl phosphatidylcholine (DMPC) liposomes we carried out oxygen consumption and ESR measurements. In PB, where BCA was in a monomer-dimer equilibrium, our results suggested that the oxygen consumption was related to the BCA monomers concentration in solution. Incorporation of BCA in DMPC liposomes, by promoting the monomerization of BCA, increased 9-fold the oxygen consumption in comparison to the value in PB. The use of specific singlet oxygen quenchers (Azide and 9,10-Anthracenedipropionic acid) in ESR and oxygen consumption experiments allowed us to assert that BCA was mainly a type II sensitizer when it was incorporated in DMPC. Finally, the cell survival of WiDr cells after a PDT treatment was measured for cells incubated with BCA in cell culture medium and cells incubated with BCA in DMPC. Irrespective of the dye concentration, the cell survival was lower when liposomes were used. This effect could be the result of a better BCA monomerization and/or a different BCA uptake in cells.     

Influence of Charging Current and Potential Drop on the Propagation of the Change in the Membrane Potential

Propagation of a change in a potential difference between two aqueous phases (W1 and W2) across a membrane was examined by using three membrane cells (A, B and C). At first, the cell A was electrically connected with the cell B by controlling the ionic compositions. By changing the connection with the cell A from the cell B to the cell C indicating the different membrane potential, the change of the membrane potential was propagated. The delay and decrement of the propagation was observed by setting capacitors or resistors in the electric circuit.     

Silver-cemented frit formation for the stabilization of the packing structure in the microchannel of electrochromatographic microchips

A simple but effective frit formation technique was developed to stabilize the packing structure inside the microchannel of capillary electrochromatographic microchips, utilizing the electroless plating technique. A Ag(NH(3))(2)(+) solution was allowed to diffuse through the colloidal silica packing in the microchannel from the reservoir of the microchip for a limited amount of time, and then it was reduced by an excess amount of formaldehyde solution. A frit structure of ~70 μm in length was formed at the entrance of the microchannel without clogging when treated with 1mM Ag(NH(3))(2)(+) ion and formaldehyde for 30s and 150 s, respectively. The formation of the frit structure was confirmed by a scanning electron microscopy. The stability of the packing structure was tested rigorously and then confirmed by applying alternating electroosmotic flows back and forth with pulsed potential steps on both sides of the frit structure. The effect of the treatment on the electrochromatograms was evaluated after the microchips were repeatedly used and stored for a long period of time. The results indicated that the silver-cemented frit structure extended the lifetime of the fully packed CEC microchips distinctly.     

微波等离子体炬耦合方式的研究

采用气动雾化连续进样、端视观测法,考察了微波等离子体炬原子发射光谱法中等离子体Ar线的背景发射以及Al,Mg,V等元素的信号发射强度随天线耦合连接点位置的不同而发生的变化.结果表明,当天线位于炬管顶端,即天线距离活塞3λ/4和λ/4时均能获得较好的等离子体,λ/4略好,信号发射强度和信背也较大,只是精密度略差一些.初步探讨了MPT炬管的电磁场结构.     

Influence of the Solvent and the Enantiomeric Purity on the Transition between Different Supramolecular Polymers

The self‐assembly of two enantiomerically pure hexa(oligo (p‐phenylene vinylene))‐substituted benzenes having 24 stereocenters was studied in pure methylcyclohexane (MCH) and in a mixture of MCH/toluene (4:1). Irrespective of the solvent a cooperative supramolecular polymerization mechanism was determined for these star‐shaped molecules by using temperature‐dependent CD and UV/Vis spectroscopy. Quite remarkably, a transition from one helical supramolecular state (A) to a second more thermodynamically stable supramolecular helical assembly (B) was observed. The rate of the A→B transition was strongly dependent on the nature of the solvent; being faster in the solvent mixture than in pure MCH. By using size exclusion chromatography we could relate the increased rate to a decreased stability of the supramolecular A state in the solvent mixture. Next, we mixed the two enantiomerically pure hexa‐substituted benzene derivatives in a so‐called majority‐rules experiment, which lead to the anitcipated chiral amplification in the A state. More importantly it appeared that the A→B transition was significantly hampered in these mixed systems. Furthermore, the absence of chiral amplification in the B state revealed the formation of separated enantiomerically pure assemblies. Therefore, by using a wide variety of spectroscopic and chromatographic techniques we determined the influence of solvent and enantiomeric purity on the transition between different supramolecular states.     

Control of the geometry of the adsorbed thin layer by the depletion interaction

The depletion interaction was reported to drive the mixtures of rodlike colloids and polymer coils into a variety of phase transitions such as isotropic-nematic, nematic-smectic, and so forth. We describe in this Communication a convenient preparation of the self-assembled monolayer of the platelike porphyrin molecules by the depletion interaction between the absorbent and the metal substrates. After the depletant, low molecular weight poly(ethylene oxide) (PEO), was added into the porphyrin/ethanol solution, random oriented porphyrin was then regulated to lie parallel to the adjacent metal substrates, forming the self-assembled monolayer.     

On the influence of the surfactant''s polar group on the local and terminal velocities of bubbles

The local and the terminal velocities, the size and the degree of bubbles’ shape deformations were determined as a function of distance from the position of the bubble formation (capillary orifice) in solutions of n-octyltrimethylammonium bromide, n-octyldimethylphosphine oxide, n-octyl-β-D-glucopyranoside and n-octanoic acid.

These surface-active compounds have different polar groups but an identical hydrocarbon chain (C8) in the molecule. The motion of the bubbles was monitored and recorded using a stroboscopic illumination, a CCD camera, and a JVC professional video. The recorded bubble images were analyzed by the image analysis software. The bubbles accelerated rapidly and their shape was deformed immediately after detachment from the capillary. The extent of the bubbles’ shape deformation (ratio of horizontal and vertical diameters) was 1.5 in distilled water and dropped rapidly down to a level of ca. 1.05–1.03 with increasing surfactant concentration. After the acceleration period the bubbles either attained a constant value of the terminal velocity (distilled water and high concentrations of the solutions), or a maximum in the velocity profiles was observed (low concentrations). The values of the terminal velocity diminished drastically with increasing concentration, from the value of 35 cm/s in water down to about 15 cm/s, while the bubble diameter decreased by ca. 10% only. The surfactant adsorption at the surface of the bubbles was evaluated and the minimum adsorption coverages required to immobilize the bubbles’ surface were determined. It was found that this minimum adsorption coverage was ca. 4% for n-octyldimethylphosphine oxide, n-octyl-β-D-glucopyranoside, n-octanoic acid and 25% for n-octyltrimethylammonium bromide. The difference in the adsorption coverage together with the surfactants’ surface activities indicate that it is mainly the adsorption kinetics of the surfactants that governs the fluidity of interfaces of the rising bubbles.