Synthesis and Characterization of Sol-Gel Cu-ZrO2 and Fe-ZrO2 Catalysts

Fe-ZrO₂ and Cu-ZrO₂ xerogels were prepared by a sol-gel method. The effect of the hydrolysis catalyst during the gelation step, namely H₂SO₄ or NH₄OH, on the properties of the resulting materials was investigated by XRD, BET, TGA/DTA, TPD of ammonia, FTIR, and TPR. Fe-ZrO₂ and Cu-ZrO₂ xerogels, with sulfuric acid introduced as the hydrolysis catalyst, mainly crystallyzed in the tetragonal phase and exhibited larger surface area and acid amount than those obtained with NH₄OH. Ammonia TPD shows that copper promoted sulfated zirconia is the most acidic material. TGA and FTIR reveal that under oxidizing conditions sulfated zirconia promoted with iron and copper retains more sulfate species than unpromoted sulfated zirconia. Regardless of the hydrolysis catalyst employed, copper promoted catalysts calcined at 600°C, contain a large fraction of copper oxide specieseasily reduced at low temperatures. These copper oxide species are believed to have different environment and interactions with the surface oxygen vacancies of the zirconia support. A FeO-like phase appears to be the most probable one after reduction of Fe-ZrO₂ catalysts prepared with NH₄OH as the hydrolysis catalyst. The formation of Fe° species may be hindered by the high dispersion and interaction of Fe²⁺ ions with the zirconia support. On the other hand, the reduction peaks of iron oxide and sulfate species exhibit a considerable overlap in the TPR profiles of sulfated Fe-ZrO₂ samples. Hence, the nature of the supported phase in the latter samples is rather uncertain.     

Removal of SO2 from Gas Streams by Oxidation using Plasma-Generated Hydroxyl Radicals

The key problem for the removal of SO₂ by electrical discharge methods is how to obtain the hydroxyl radicals at high concentration and large production rates. With the micro-gap discharge method, O₂ and H₂O in simulated gas streams (N₂/O₂/H₂O/SO₂) are ionized into a large number of OH^. radicals to oxidize SO₂ into SO₃ which reacts with H₂O forming H₂SO₄ droplets at 120 °C in the absence of any catalyst or absorbent. The droplets are captured with an electrostatic precipitator. As a result, conversion of SO₂ to primarily H₂SO₄ is limited by the generation of OH^. radicals. By increasing the reduced field and concentrations of O₂ and H₂O, the amount of OH^. radicals increase resulting in more removal of SO₂ from gas streams. The removal efficiency of SO₂ reaches 100% when the residence time is only 0.74 s. Therefore, a new gas-phase oxidation method for removal of SO₂ without NH₃ additive is found.     

TiO2基固体超强酸的制备及光催化性能研究

半导体氧化物TiO2对很多有机污染物吸附较强、催化氧化活性高,因此它在环境污染治理方面扮演极其重要的角色,被广泛用于光催化处理多种有机物,但常规二氧化钛半导体光催化剂较低的量子效率(约4%)使其应用受到一定程度的制约[1]。1979年H ino[2]等首次报道无卤素型SO42-/M xO y固体超强酸体系以来,引起化学工作者极大关注。固体超强酸催化剂如SO42-/TiO2,SbF5/SiO2/TiO2等是一类新型酸催化剂,广泛用于酯化反应、苯衍生物烷基化、烯烃齐聚等。研究发现,基于SO42-改性的TiO2固体超强酸催化剂对于有机物具有较高的光催化氧化活性[3,4],…     

Study of the vibrational spectra of SO2, H2O and D2O using the U(4) algebraic model

Using the U(4) algebraic model, in this work we report a study of the vibrational spectra of SO₂, H₂0¹⁸ and D₂O¹⁶. The inclusion of intermode couplings in algebraic models has been stated to give a deep insight into detailed spectroscopy for these bent XY₂ molecules. Improved set of algebraic parameters has been reported to provide improved RMS deviations for these molecules.     

Preparation and characterization of ZrWMoO<Subscript>8</Subscript> powders with different morphologies

ZrWMoO₈ powders with different morphologies were obtained using ammonium tungstate, molybdate tungstate and zirconium tungstate as the starting materials by dehydrating the precursor ZrWMoO₇(OH)₂(H₂O)₂. The precursor was studied by thermo-gravimetric and differential scanning calorimetry (TG-DSC). The influence of the gelling agents (HCl, HClO₄, HNO₃, H₂SO₄ and H₃PO₄) on the crystallization process and crystal morphology of the products prepared was investigated by X-ray powder diffraction (XRD), scanning electron micrograph (SEM) and X-ray fluorescence spectrometer (XRF). Results showed that the morphology of the ZrWMoO₈ particles can be simply adjusted by changing the gelling agents, and the thermal expansion coefficients of cubic ZrWMoO₈ prepared in HCl solution are −3.84 × 10⁻⁶ K⁻¹ from 100°C to 700°C. __________ Translated from Chemical Journal of Chinese University, 2007, 28(3): 397–401 [译自: 高等学校化学学报]     

Thermally Induced Phase Transformation on 12-Tungstophosphoric Acid/ZrO2 Sol-Gel

Zirconium (IV)-n-butoxide and tungstophosphoric acid (WP) were co-gelled at pH 3, 5 and 7 with HCl acid, C₂H₄O₂ acid and NH₄OH, respectively. Pyridine adsorption bands at 1610 and 1442 cm^–1 corresponding to Lewis acidic sites were observed by FTIR spectroscopy. Acidity determined by ammonia thermodesorption shows values around 1100 mol of NH₃/g, which correspond to solids showing super acidity. It was found that the incorporation of WP to gelling zirconia delay the formation of tetragonal zirconia. Raman spectroscopy shows the stabilization of the Keggin structure on zirconia thermally treated at 400°C.     

Tribochemistry and kinetics of Al2(SO4)3·xH2O decomposition

The thermal decomposition of tribochemically activated Al₂(SO₄)₃·xH₂O was studied by TG, DTA and EMF methods. For some of the intermediate solids, X-ray diffraction and IR-spectroscopy were applied to learn more about the reaction mechanism. Thermal and EMF studies confirmed that, even after mechanical activation of Al₂(SO₄)₃·xH₂O, Al₂O(SO₄)₂ is formed as an intermediate. Isothermal kinetic experiments demonstrated that the thermochemical sulphurization of inactivated Al₂(SO₄)₃·xH₂O has an activation energy of 102.2 kJ·mol^?1 in the temperature range 850–890 K. The activation energy for activated Al₂(SO₄)₃·xH₂O in the range 850–890 K is 55.0 kJ·mol^?1. The time of thermal decomposition is almost halved when Al₂(SO₄)₃·xH₂O is activated mechanically. The results permit conclusions concerning the efficiency of the tribochemical activation of Al₂(SO₄)₃·xH₂O and the chemical and kinetic mechanisms of the desulphurization process.     

双介孔结构的纳米TiO2/I2复合材料的制备及其可见光催化性能

以钛酸丁酯为前驱体, 碘溶胶为碘源, 在室温下采用水解沉淀法制备了单质碘和纳米TiO₂复合的双介孔结构光催化剂(M-I₂-TiO₂). 采用X射线衍射(XRD)、透射电子显微镜(TEM)、比表面分析(BET)、紫外-可见(UV-Vis)漫反射光谱和傅里叶变换-红外光谱(FT-IR)对M-I₂-TiO₂进行了表征. 以次甲基蓝(MB)溶液为模拟废水, 对M-I₂-TiO₂的光催化性能进行了评价, 研究了不同热处理温度对光催化活性的影响. 结果表明, M-I₂-TiO₂在可见光区有显著的吸收, 300 ℃热处理得到的样品比表面积高达227.6 m²/g, 600 ℃热处理所得样品的比表面积仍高达111.8 m²/g, 而400 ℃热处理所得样品具有最好的光催化降解性能. 双介孔结构纳米TiO₂/I₂复合材料的光催化降解性能显著高于相同方法制备的纯TiO₂和Degussa P-25商业产品. 催化剂经6次重复使用其光催化活性基本保持不变.     

Design of Homogeneous Hybrid Materials through a Careful Control of the Synthetic Procedure

Sols for the synthesis of hybrid organic-inorganic materials have been prepared by mixing zirconium n-propoxide and methacryloxypropyltrimethoxysilane (MPS). The synthesis was done in two steps: a 15 minute hydrolysis of a MPS : H₂O : EtOH 1 : 1 : 2 mixture and then addition of 0.5 molar equivalent of zirconium alkoxide. All the experimental parameters—hydrolysis ratio, pH, dilution, pre-hydrolysis time—have been optimized through a detailed ²⁹ Si and ¹⁷O NMR analysis. Immediately after the addition, 94% of the initial water was consumed for the formation of Si–O–Zr bridges. Cleavage of these bonds, associated with formation of Si–O–Si and Zr–O–Zr bridges are then observed during the aging time.     

纳米复合固体超强酸SO42-/CoFe2O4的制备和表征

采用纳米化学制备技术合成了新型的纳米复合固体超强酸催化剂ＳＯ４＾２－／ＣｏＦｅ２Ｏ４。用ＸＲＤ、ＴＥＭ、ＸＰＳ、红外光谱和比表面测定等技术研究了该催化剂的结构形态,结果表明：所研制的ＳＯ４＾２－／ＣｏＦｅ２Ｏ４２催化剂为晶态纳米粒子（〈５０ｎｍ）,比表面积很大（１５７ｍ＾２．ｇ＾－１）,ＳＯ４＾２－与氧化物的金属离子呈无机齿螯合状配位化合物的结合形式。以乙酸乙酯合成为模型反应考究了该催化剂的催化活     

Kinetic study of zirconia crystallization from amorphous ZrO2-SiO2 composite precursors processed by sol-gel chemistry

Powder precursor gels with composition xZrO₂·(100–x)SiO₂, with selected values of x=8, 24, 43 and 75 mol%, were processed by sol-gel chemistry. Differential thermal analysis (DTA) was used to study crystallization in (cubic/tetragonal)-ZrO₂ during the heating of the reactive amorphous precursors. Kinetic parameters such as activation energy, Avrami's exponent and frequency factor have been simultaneously calculated from the computed DTA data using a previously reported kinetic model. The crystallization temperature decreases relative to the increase in the amount of ZrO₂, the value of the kinetic parameter of the crystallization being related to the value of x.     

Gold-vanadium-niobium catalysts in environmental protection—adsorption and interaction of NO, C3H6 and O2—FT-IR study

FT-IR study of NO and C₃H₆ adsorption, co-adsorption and interaction in the presence of oxygen were performed in order to estimate the catalytic behaviour of Au and V-containing MCM-41 materials in NO-SCR with propene. MCM-41 were modified with gold, vanadium and niobium by their introduction during the synthesis (co-precipitation) carried out with the use of HCl or H₂SO₄ as pH adjustment agent. The texture/structure properties of the prepared samples were investigated by N₂ adsorption, XRD, XPS and TEM techniques. It has been found that the nature of acid used for the pH adjustment during the synthesis determines the gold particles size and dispersion and influences the interaction of NO+O₂+C₃H₆ with the catalyst surfaces. In both types of AuVMCM-41 catalysts, the SCR reaction route occurs via NO₂ formation. In the case of AuVMCM-41(HCl) and AuVNbMCM-41(HCl) nitrites are formed and stored, and upon heating NO₂ is released. These kinds of nitrites are not formed on AuVMCM-41(H₂SO₄) and AuVNbMCM-41(H₂SO₄). Instead of that NO₂ is chemisorbed on metallic gold, niobium and vanadium species and reacts with propene and/or oxygenates.     

Facile synthesis and characterization of monocrystalline cubic ZrO2 nanoparticles

Crystalline ZrO₂ nanoparticles were prepared from zirconium isopropoxide by slow hydrolysis and subsequent hydrothermal treatment of solutions containing various amounts of sodium hydroxide at 180 °C. Whereas moderately basic solutions lead to the formation of nanoparticles of monoclinic ZrO₂ with plate-like morphology, and nanoparticles of the cubic ZrO₂ high-temperature polymorph with diameters of approx. 5 nm were obtained from strongly basic solutions. The morphology, structure and properties of as-synthesized nanoparticles were characterized using HRTEM, XRD, Raman spectroscopy, UV–vis, PL spectroscopy and BET measurements. The formation of both, the monoclinic and the cubic polymorph, was confirmed by electron microscopy and Raman spectroscopy. The crystallinity and morphology of the resulting ZrO₂ nanoparticles can be adjusted by the choice of the reaction conditions. The cubic ZrO₂ nanoparticles have a high surface area (300 m²/g) and exhibit a strong photoluminescence in the UV region.     

单分子水对H_2O_2+Cl气相反应影响的理论研究

在aug-cc-pVTZ基组下采用CCSD(T)和B3LYP方法,研究了H2O2+Cl反应,并考虑在大气中单个水分子对该反应的影响.结果表明,H2O2+Cl反应只存在一条生成产物为HO2+HCl的通道,其表观活化能为10.21kJ·mol-1.加入一分子水后,H2O2+Cl反应的产物并没有发生改变,但是所得势能面却比裸反应复杂得多,经历了RW1、RW2和RW3三条通道.水分子在通道RW1和RW2中对产物生成能垒的降低起显著的负催化作用,而在通道RW3中则起明显的正催化作用.利用经典过渡态理论(TST)并结合Wigner矫正模型计算了216.7-298.2 K温度范围内标题反应的速率常数.结果显示,298.2 K时通道R1的速率常数为1.60×10-13cm3·molecule-1·s-1,与所测实验值非常接近.此外,尽管通道RW3的速率常数kRW3比对应裸反应的速率常数kR1大了46.6-131倍,但该通道的有效速率常数k'RW3却比kR1小了10-14个数量级,表明在实际大气环境中水分子对H2O2+Cl反应几乎没有影响.     

Studies on synthesis, characterization and thermochemistry of Mg2[B2O4(OH)2]·H2O

A new magnesium borate Mg₂[B₂O₄(OH)₂]·H₂O has been synthesized by the method of phase transformation of double salt at hydrothermal condition and characterized by XRD, IR, TG and DSC. The enthalpy of solution of Mg₂[B₂O₄(OH)₂]·H₂O in 0.9764 mol L^–1 HCl was determined. With the incorporation of the enthalpies of solution of H₃BO₃ in HCl (aq), of MgO in (HCl+H₃BO₃) (aq), and the standard molar enthalpies of formation of MgO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of –(3185.78±1.91) kJ mol^–1 of Mg₂[B₂O₄(OH)₂]·H₂O was obtained.This revised version was published online in November 2005 with corrections to the Cover Date.     

Freezing-point of mixtures of H 2 16 O and H 2 18 O

Freezing-point depression of mixtures of H ₂ ¹⁶ O and H ₂ ¹⁸ O were measured. The results showed that the freezing point of the mixture rose linearly with an increase in the molal concentration of H ₂ ¹⁸ O. The results suggested the formation of a solid solution of H ₂ ¹⁶ O and H ₂ ¹⁸ O by freezing, similar to that formed by H ₂ O–D ₂ O, and that H ₂ ¹⁸ O behaves as a different molecule than H ₂ ¹⁶ O.     

Metallogel of bis(tetrazole)-appended pyridine derivative with CoBr2 as a chemoprobe for volatile gases containing chloride atom

A bis(tetrazole)-appended ligand 1 formed the metallogel efficiently by mixing with Co²⁺ ion. Interestingly, the metallogel 1 with CoBr₂ showed the orange yellow colour, which has octahedral structure. The rheological properties of metallogel obtained with CoBr₂ were ca. 1.5-fold larger than that for the metallogel obtained with CoCl₂. Upon addition of HCl, SOCl₂, (COCl)₂ and COCl₂ containing chloride atoms in the metallogel 1 prepared with CoBr₂ changed from orange yellow to blue-green colour. These results indicate that the octahedral structure of metallogel was converted into the tetrahedral structure. On the other hand, no significant colour changes were observed in the presence of an excess of other anions, namely HF, HBr, HI, HNO₃ and H₂SO₄. These findings indicate that the metallogel 1 with CoBr₂ is useful as a chemoprobe for gases containing chloride atom.     

Synthesis, structure, and properties of chromium(III) sulfates

Reactions between CrO₃ and 50- are studied at temperatures up to the boiling point of the acid. Depending on the H₂SO₄ concentration and synthesis temperature, Cr₂(SO₄)₃, CrH(SO₄)₂, (H₃O)[Cr(SO₄)₂], Cr₂(SO₄)₃·H₂SO₄·4H₂O (gross formula), and (H₅O₂)[Cr(H₂O)₂(SO₄)₂], are obtained as identified reaction products in addition to the incompletely characterized chromic-sulfuric acid. The Cr^III-based sulfates are characterized by X-ray powder diffraction, thermogravimetric, and magnetic susceptibility measurements. The nuclear and magnetic structures of Cr₂(SO₄)₃ at are determined, the structure type of (H₃O)[Cr(SO₄)₂] is established, and the crystal structure of (H₅O₂)[Cr(H₂O)₂(SO₄)₂] is firmly stipulated. Magnetic susceptibility data suggest that the samples of CrH(SO₄)₂ are in a micro-crystalline rather than in an amorphous state. All Cr^III-based sulfates synthesized in this study appear to undergo paramagnetic-to-antiferromagnetic transitions at around .     

NMR relaxation study of the phase transitions and relaxation mechanisms of the alums MCr(SO4)2·12H2O (M=Rb and Cs) single crystals

The physical properties and phase transition mechanisms of MCr(SO₄)₂·12H₂O (M=Rb and Cs) single crystals have been investigated. The phase transition temperatures, NMR spectra, and the spin-lattice relaxation times T₁ of the ⁸⁷Rb and ¹³³Cs nuclei in the two crystals were determined using DSC and FT NMR spectroscopy. The resonance lines and relaxation times of the ⁸⁷Rb and ¹³³Cs nuclei undergo significant changes at the phase transition temperatures. The sudden changes in the splitting of the Rb and Cs resonance lines are attributed to changes in the local symmetry of their sites, and the changes in the temperature dependences of T₁ are related to variations in the symmetry of the octahedra of water molecules surrounding Rb⁺ and Cs⁺. We also compared these ⁸⁷Rb and ¹³³Cs NMR results with those obtained for the trivalent cations Cr and Al in MCr(SO₄)₂·12H₂O and MAl(SO₄)₂·12H₂O crystals.     

Gas-phase reactions in plasmas of SF6 with O2: Reactions of F with SOF2 and SO2 and reactions of O with SOF2

The plasma chemistry of SF₆/O₂ mixtures is particularly complicated because of the large number of possible reactions. Over a wide range of conditions, products including SF₄, SOF₄, SOF₂, and SO₂F₂ can be formed but thre is considerable uncertainty about the major reactions which contribute to the formation of these species. In this work reactions of oxygen atoms with SOF₂ and fluorine atoms with SOF₂ and SO₂ have been studied in order to determine the principal sources of SO₂F₂ in these plasmas. Reactions were studied at 295 K in a gas flow reactor sampled by a mass spectrometer. No reaction could be detected between oxygen atoms and SOF₂, which for the conditions employed, means that the upper limit for the reaction rate coefficient is 1×10^–14 cm³ sec^–1. The reaction of fluorine atoms with SOF₂ was studied with the helium bath gas number density ranging from 3.1×10¹⁶ to 2.0×10¹⁷ cm^–3. Within this range the rate coefficient increased with increasing [He] from (4.1 to 10.8)×10^–14 cm³ sec^–1. SO₂ was found to react with fluorine atoms with a rate coefficient which appeared to be independent of the helium bath gas number density over the range given above. The possibility that this reaction occurred entirely on the walls of the reactor is discussed.