Reversible intercalation of ammonia molecules into a layered double hydroxide structure without exchanging nitrate counter-ions

A zinc/aluminum LDH was precipitated with recycled ammonia from a chemical vapor deposition reaction. The LDH presented a crystalline phase with basal distance of 8.9 Å, typical for nitrate-containing LDHs, and another phase with a basal distance of 13.9 Å. Thermal treatment at 150 °C eliminated the phase with the bigger basal distance leaving only the anhydrous nitrate-intercalated LDH structure with 8.9 Å. Intense N-H stretching modes in the FTIR spectra suggested that the expansion was due to intercalation of ammonia in the form of [NH₄(NH₃)_n]⁺ species. When additional samples were precipitated with pure ammonia, the conventional LDH nitrate structure was obtained (8.9 Å basal distance) at pH=7, as well as a pure crystalline phase with 13.9 Å basal distance at pH=10 due to ammonia intercalation that can be removed by heating at 150 °C or by stirring in acetone, confirming a unusual sensu stricto intercalation process into a LDH without exchanging nitrate ions.     

Oxidative condensation and chemiluminescence of 5-amino-2,3-dihydro-1,4-phtalazinedione

The oxidative condensation of (5-amino-2,3-dihydro-1,4-phtalazinedione) luminol was carried out under their oxidation by (NH₄)₂S₂O₈ and KIO₃ in the mixed water-organic (namely dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF) or N-methyl-2-pyrrolidinone (MPD)) solvent under the volume ratio 1:9. The structure of the products was studied by IR and Raman spectroscopy, elemental analysis and the derivatographic method. It was determined that oxidation by KIO₃ (E = 1.085 V) occurs on the amide nitrogen atoms, while in the case of (NH₄)₂S₂O₈ (E = 2.05 V) it occurs on the amino-group. The structure and thermal stability of the obtained products is determined by the nature of the oxidant. The active decomposition of luminol begins at t_d = 334.5 °C, while for the specimens of the polyluminols, which were synthesized in the water-DMSO and water-MPD mixtures, t_d equals 356.7 and 409.1 °C respectively. The worst thermal stability has products of luminol oxidation by KIO₃ (t_d = 282.5 °C). The mechanism of the luminol oxidative polymerization by (NH₄)₂S₂O₈ and KIO₃ has been proposed.     

Formation of apatite oxynitrides by the reaction between apatite-type oxide ion conductors, La8+xSr2−x(Si/Ge)6O26+x/2, and ammonia

Following growing interest in the use of ammonia as a fuel in solid oxide fuel cells (SOFCs), we have investigated the possible reaction between the apatite silicate/germanate electrolytes, La_8+xSr_2−x(Si/Ge)₆O_26+x/2, and NH₃ gas. We examine how the composition of the apatite phase affects the reaction with ammonia. For the silicate series, the results showed a small degree of N incorporation at 600 °C, while at higher temperatures (800 °C), substantial N incorporation was observed. For the germanate series, partial decomposition was observed after heating in ammonia at 800 °C, while at the lower temperature (600 °C), significant N incorporation was observed. For both series, the N content in the resulting apatite oxynitride was shown to increase with increasing interstitial oxide ion content (x/2) in the starting oxide. The results suggest that the driving force for the nitridation process is to remove the interstitial anion content, such that for the silicates the total anion (O+N) content in the oxynitrides approximates to 26.0, the value for an anion stoichiometric apatite. For the germanates, lower total anion contents are observed in some cases, consistent with the ability of the germanates to accommodate anion vacancies. The removal of the mobile interstitial oxide ions on nitridation suggests problems with the use of apatite-type electrolytes in SOFCs utilising NH₃ at elevated temperatures.     

Copper(II)–Ammonia Complexation Equilibria in Aqueous Solutions at Temperatures from 30 to 250°C by Visible Spectroscopy

The spectra of copper(II)–ammonia solutions in 2 mol-kg^–1 NH₄NO₃(aq) were recorded as a function of pH with a new UV–visible flow cell, capable of operating at conditions up to 325°C and 300 bars. Equilibrium constants for the formation of copper(II)–ammonia complexes Cu(NH₃)_n ²⁺, 1 n 4, from 30 to 150°C were determined by evolving factor analysis and nonlinear least-squares regression. Measurements at higher temperatures were limited by thermal decomposition of NH₄NO₃(aq). The formation constants of Cu(NH₃)_n ²⁺ decrease with temperature, consistent with extrapolations of literature data from measurements below 100°C. Measurements above 150°C were carried out in 0.5 mol-kg^–1 CF₃SO₃H (aq), at the very high ammonia concentrations required to avoid the precipitation of CuO(s). The spectra are consistent with Cu(NH₃)₄ ²⁺ as the predominant species, based on extrapolations of peak maxima and molar absorptivities from lower temperatures. Shifts in the spectra of Cu²⁺ and the Cu(NH₃)_n ²⁺ species to higher wavelength and increases in molar absorbance with increasing temperature are discussed in terms of the structure of the complexes.     

Hydroxylammonium fluorometalates: Synthesis and characterisation of a new fluorocuprate and fluorocobaltate

The first layered hydroxylammonium fluorometalates, (NH₃OH)₂CuF₄ and (NH₃OH)₂CoF₄, were prepared by the reaction of solid NH₃OHF and the aqueous solution of copper or cobalt in HF. Both compounds crystallize in monoclinic, P2₁/c, unit cell with parameters: a = 7.9617(2) Å, b = 5.9527(2) Å, c = 5.8060(2) Å, β = 95.226(2)° for (NH₃OH)₂CuF₄ and a = 8.1764(3) Å, b = 5.8571(2) Å, c = 5.6662(2) Å, β = 94.675(3)° for (NH₃OH)₂CoF₄, respectively. Magnetic susceptibility was measured between 2 K and 300 K giving the effective Bohr magneton number of 2.1 for Cu and 5.2 BM for Co. At low temperatures both complexes undergo a transition to magnetically ordered phase. The thermal decomposition of both compounds was studied by TG, DSC and X-ray powder diffraction. The thermal decomposition of (NH₃OH)₂CuF₄ is a complex process, yielding NH₄CuF₃ as an intermediate product and impure Cu₂O as the final residue, while (NH₃OH)₂CoF₄ decomposes in two steps, obtaining CoF₂ after the first step and CoO as the final product.     

Reaction kinetics of the microwave enhanced digestion of zircon with ammonium acid fluoride

Zircon is notorious for its chemical inertness. Extreme processing conditions such as alkaline fusion (NaOH at 600 °C or Na₂CO₃ at 1200 °C) are used to extract the zirconium values from the mineral. In this study zircon was treated with ammonium acid fluoride (NH₄F·1.5HF) by means of microwave assisted digestion. Reaction times ranged from 15 to 260 min at temperatures between 120 °C and 240 °C. Successive microwave digestion steps, interrupted by an aqueous wash procedure, resulted in a >99% conversion of zircon to the water soluble intermediates (NH₄)₃ZrF₇ and (NH₄)₂SiF₆. Arrhenius rate laws are derived for both reaction control (progressively shrinking particle) and diffusion control by the product layer. Both models show reasonably good agreement with the experimental data. The derived diffusion coefficient corresponds to a solid-liquid case.     

Influence of polycaprolactone-triol addition on thermal stability of soy protein isolate based films

The influence of polycaprolatone-triol (PCL-T) on the thermal degradation properties of soy protein isolate (SPI)-based films was studied by thermogravimetry and infrared spectroscopy under nitrogen atmosphere. The results showed that in the absence of PCL-T the thermal degradation began between 292 °C (pure SPI films) and ca. 264 °C (SPI/SDS films with more than 20% of SDS), and these values decreased further to the range 250-255 °C for SPI/SDS/PCL-T films. At the same time, the temperature of maximum degradation rate (T_max) decreased from 331 °C (pure SPI film) to ca. 280 °C for SPI/SDS/PCL-T films with 39% PCL-T content. This behavior was also confirmed by the activation energy (E) values associated with the thermal degradation process. Apparently, the low thermal stability of PCL-T as compared to other film constituents, along with its plasticizer characteristics, is responsible for the decreased stability of SPI/SDS/PCL-T films. The FTIR spectra of gas products evolved during the thermal degradation indicated the formation of OH, CO₂, NH₃ and other saturated compounds, suggesting that the reaction mechanism involved simultaneous scission of the C(O)-O polyester bonds and C-N, C(O)-NH, C(O)-NH₂ and -NH₂ bonds of the protein.     

Synthesis and properties of a new ketoiminate derivative of the 2,2,6,6-tetramethylheptane-3,5-dionate ligand to prepare volatile CVD precursors

The β-ketoimine (CH₃)₃CC(NH₂)CHC(O)C(CH₃)₃ (1) was synthesized by amination with dry ammonia in the presence of TiCl₄. M.p. = 131 °C. IR and ¹H and ¹³C NMR spectroscopic characterization indicates that the structure of a solution of 1 is the ketone form, and a single-crystal X-ray diffraction study shows that the structure of 1 is the enaminoketone form. The reaction of 1 with copper(II) and nickel(II) salts in solution gave chelate metal complexes: Cu[(CH₃)₃CC(NH)CHC(O)C(CH₃)₃]₂ (2), M.p. = 209 °C, and Ni[(CH₃)₃CC(NH)CHC(O)C(CH₃)₃]₂ (3), M.p. = 267 °C. These complexes are volatile and sublime at 180–190 °C at 5 × 10⁻³ Torr. An X-ray diffraction study reveals that these metal complexes are monomeric and isostructural in the solid state. In compound 2, the Cu atom has a square coordination environment: Cu–O ≈ Cu–N = 1.91 Å, ∠O–Cu–N = 91.81 Å.     

A thermogravimetric study of the alunites of sodium, potassium and ammonium

Thermogravimetry in tandem with mass spectrometry has been used to characterise the thermal decomposition of synthetic alunites of potassium, sodium and ammonium. Three mechanisms of decomposition are observed (a) dehydration, (b) dehydroxylation and (c) desulphation. The thermal decomposition of the three alunites is different. For NH₄-alunite, an additional process of de-ammoniation is observed which occurs simultaneously with dehydration. Dehydroxylation takes place in a series of four steps. De-sulphation occurs for K-alunite at 680 °C in a single step in comparison with Na and NH₄ alunites where de-sulphation is observed in a series of four steps. The temperature of desulphation is cation dependent. The thermal decomposition is not completed until around 800 °C.     

Thermal phase transitions in antimony (III) oxides

Previous reports of the thermal behaviour of antimony trioxide show significant disagreement on the values for the temperatures associated with specific thermal events. In this reappraisal, samples of both polymorphs of Sb₂O₃ (senarmontite and valentinite) have been analysed using X-ray diffraction and simultaneous differential thermal/thermogravimetric analysis techniques. The senarmontite-valentinite phase transition has been observed to occur as a multi-stage event commencing at temperatures as low as 615±3 °C—evidence of oxidation to Sb₂O₄ under inert atmosphere may indicate that the depression is related to surface- or bulk-bound water. Valentinite produced by mechanical milling of senarmontite exhibits the reverse phase transition to senarmontite at a lower than normal temperature (445±3 °C). Oxidation temperatures of 531±4 °C for senarmontite and 410±3 °C for mechanically derived valentinite were also recorded.     

The effect of Zn, Al layered double hydroxide on thermal decomposition of poly(vinyl chloride)

Poly(vinyl chloride)/layered double hydroxide (LDH) composite was prepared by mixing 4 wt% Zn₂Al-CO₃-LDH with PVC and fluxing at 180 °C. The thermal decomposition behaviour of the LDH + PVC composite in air and nitrogen environments was systematically investigated. We found that mixing Zn₂Al-CO₃-LDH into PVC facilitates dehydrochlorination from ca. 300 to 270 °C but reduces the reaction extent to leave more chlorine on the polyene backbones both in air and N₂. We have also found that at 400-550 °C, both in air and N₂, LDH assists the formation of char-like materials and decreases the release of volatile hydrocarbons. From 550 to 800 °C, the char-like materials are mostly retained in N₂ while they are almost completely thermo-oxidized (burned) in air. Thus, addition of Zn₂Al-CO₃-LDH to PVC does not increase the thermal stability, but does promote charring to retard the generation of flame. The influence of LDH on PVC thermal properties has been also addressed mechanically.     

A new sensor for ammonia based on cyanidin-sensitized titanium dioxide film operating at room temperature

Design and fabrication of an ammonia sensor operating at room temperature based on pigment-sensitized TiO₂ films was described. TiO₂ was prepared by sol–gel method and deposited on glass slides containing gold electrodes. Then, the film immersed in a 2.5 × 10⁻⁴ M ethanol solution of cyanidin to absorb the pigment. The hybrid organic–inorganic formed film here can detect ammonia reversibly at room temperature. The relative change resistance of the films at a potential difference of 1.5 V is determined when the films are exposed to atmospheres containing ammonia vapors with concentrations over the range 10–50 ppm. The relative change resistance, S, of the films increased almost linearly with increasing concentrations of ammonia (r = 0.92). The response time to increasing concentrations of the ammonia is about 180–220 s, and the corresponding values for decreasing concentrations 240–270 s. At low humidity, ammonia could be ionized by the cyanidin on the TiO₂ film and thereby decrease in the proton concentration at the surface. Consequently, more positively charged holes at the surface of the TiO₂ have to be extracted to neutralize the adsorbed cyanidin and water film. The resistance response to ammonia of the sensors was nearly independent on temperature from 10 to 50 °C. These results are not actually as good as those reported in the literature, but this preliminary work proposes simpler and cheaper processes to realize NH₃ sensor for room temperature applications.     

K2Li(NH2)3 and K2Na(NH2)3—synthesis and crystal structure of two crystal-chemically isotypic mixed-cationic amides

K₂Li(NH₂)₃ (1) was the only crystalline product obtained from the reaction of potassium with dilithium decahydro-closo-decaborate Li₂B₁₀H₁₀ in liquid ammonia at −38 °C. The compound crystallizes in the space group P4₂/m with Z=4, a=6.8720(5) Å, c=11.706(1) Å and V=552.81(7) Å³. The investigated crystal-chemically isotypic sodium compound K₂Na(NH₂)₃ (2) was merohedrally twinned and crystallized from a reaction mixture containing potassium and disodium decahydro-closo-decaborate Na₂B₁₀H₁₀ in liquid ammonia with a=7.0044(5) Å, c=12.362(1) Å and V=606.48(9) Å³. The compounds contain pairs of edge sharing tetraamidolithium or tetraamidosodium tetrahedra which are interconnected by potassium ions forming three-dimensional infinite networks.     

Thermal stability of silver sulfathiazole-epoxy resin network

The aim of this study is to evaluate the thermal stability and thermal degradation behavior of an epoxy network based on bisphenol A modified with silver sulfathiazole and crosslinked with ethylenediamine. The sample was studied by thermogravimetric analysis coupled with differential scanning calorimetry over a range of temperature between 30 and 600 °C in N₂ atmosphere and using heating rates of 5, 10, 15 and 20 °C min⁻¹. The kinetic parameters of thermal degradation process were calculated. Fourier transforms infrared spectroscopy and mass spectroscopy coupled to thermogravimetry was used to identify the volatile products resulting from the degradation of the network. The study showed that the sample is stable up to temperatures exceeding 290 °C. The major degradation volatile products identified were: ammonia, water, carbon dioxide and compounds with aromatic structure such as bisphenol A and its degradation products.     

Microstructure and electrical-optical properties of cesium tungsten oxides synthesized by solvothermal reaction followed by ammonia annealing

Cesium tungsten oxides (Cs_xWO₃) were synthesized by solvothermal reactions using ethanol and 57.1 vol% ethanol aqueous solution at 200 °C for 12 h, and the effects of post annealing in ammonia atmosphere on the microstructure and electrical-optical properties were investigated. Agglomerated particles consisting of disk-like nanoparticles and nanorods of Cs_xWO₃ were formed in the pure ethanol and ethanol aqueous solutions, respectively. The samples retained the original morphology and crystallinity after annealing in ammonia atmosphere up to 500 °C, while a small amount of nitrogen ion were incorporated in the lattice. The as-prepared Cs_xWO₃ sample showed excellent near infrared (NIR) light shielding ability as well as high transparency in the visible light region. The electrical resistivity of the pressed pellets of the powders prepared in pure ethanol and 57.1 vol% ethanol aqueous solution greatly decreased after ammonia annealing at 500 °C, i.e., from 734 to 31.5 and 231 to 3.58 Ω cm, respectively.     

Synthesis, characterization, and thermal properties of new silarylene-siloxane-acetylene polymers

New silarylene-siloxane-acetylene polymers have been synthesized by coupling reactions employing 1,3-bis(p-ethynylphenyl)-1,1,3,3-tetraphenyldisiloxane (3) as the key monomer. Their thermal properties have been evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). All of the new polymers showed good thermal stability, with their temperatures at 5% weight loss (T_d5) being higher than 540 °C under nitrogen and higher than 460 °C in air. Their char yields at 1000 °C under N₂ were above 80%. Broad exothermic peaks, attributable to reaction of the acetylenic units, were observed by DSC analysis in the temperature range 270-450 °C.     

Carbon nanotube networks as gas sensors for NO2 detection

Networks of different carbon nanotube (CNT) materials were investigated as resistive gas sensors for NO₂ detection. Sensor films were fabricated by airbrushing dispersions of double-walled and multi-walled CNTs (DWNTs and MWNTs, respectively) on alumina substrates. Sensors were characterized by resistance measurements from 25 to 250 °C in air atmosphere in order to find the optimum detection temperature. Our results indicate that CNT networks were sensitive to NO₂ concentrations as low as 0.1 ppm. All tested sensors provided significantly lower response to interfering gases such as H₂, NH₃, toluene and octane. We demonstrate that the measured sensitivity upon exposure to NO₂ strongly depends on the employed CNT material. The highest sensitivity values were obtained at temperatures ranging between 100 and 200 °C. The best sensor performance, in terms of recovery time, was however achieved at 250 °C. Issues related to the gas detection mechanisms, as well as to CNT network thermal stability in detection experiments performed in air at high operation temperatures are also discussed.     

Phase equilibria in the CdI2-Ag2Se system

The phase diagram of the system CdI₂-Ag₂Se is studied by means of X-ray diffraction, differential thermal analysis and measurements of the density of the material. The unit cell parameters of the intermediate phase 2CdI₂·3Ag₂Se were determined a = 0.6387 Å, b = 4.311 Å, c = 4.044 Å; α = 113.72°, β = 90.27° and γ = 94.85°. The intermediate phase 2CdI₂·3Ag₂Se has a polymorphic transition at 125 °C. It melts incongruently at 660 °C.     

Determination of cadmium, copper and lead in soils, sediments and sea water samples by ETAAS using a Sc + Pd + NH(4)NO(3) chemical modifier

Cadmium, copper and lead in soils, sediments and spiked sea water samples have been determined by electrothermal atomic absorption spectrometry (ETAAS) with Zeeman effect background corrector using NH₄NO₃, Sc, Pd, Sc + NH₄NO₃, Pd + NH₄NO₃, Sc + Pd and Sc + Pd + NH₄NO₃ as chemical modifiers. A comprehensive comparison was made among the modifiers and without modifier in terms of pyrolysis and atomization temperatures, atomization and background absorption profiles, characteristic masses, detection limits and accuracy of the determinations. Sc + Pd + NH₄NO₃ modifier mixture was found to be preferable for the determination of analytes in soil and sediment certified and standard reference materials, and sea water samples because it increased the pyrolysis temperature up to 900 °C for Cd, 1350 °C for Cu and 1300 °C for Pb. Optimum masses of mixed modifier components found are 20 μg Sc + 4 μg Pd + 8 μg NH₄NO₃. Characteristic masses of Cd, Cu and Pb obtained are 0.6, 5.3 and 15.8 pg, respectively. The detection limits of Cd, Cu and Pb were found to be 0.08, 0.57 and 0.83 μg l⁻¹, respectively. Depending on the solid sample type, the percent recoveries were increased up to 103% for Cd, Cu and Pb by using the proposed modifier mixture. The accuracy of the determination of analytes in the sea water samples was also increased.     

Ash properties of Pinus halepensis needles treated with diammonium phosphate

The ash properties of Pinus halepensis (Aleppo pine) needles before and after treatment with diammonium phosphate (NH₄)₂HPO₄ (DAP) have been investigated, using thermogravimetric analysis (TG), differential thermal analysis (DTA), titrimetry, inductively coupled plasma-emission spectrometry (ICP-ES), X-ray diffraction (XRD) and scanning electron microscopy (SEM). DAP is extensively used as active component in wildland fire retardants.The following crystalline compounds have been identified in ashes prepared at 600 °C before treatment with DAP: KCl, Ca(OH)₂, MgO, (CaMg)CO₃, K₂CO₃·CaCO₃, K₂CO₃, K₂SO₄, CaO and CaCO₃, whereas CaO, MgO, K₂SO₄, K₂CO₃, CaCO₃, KCl and CaO, MgO, K₂SO₄ and K₂CO₃ at 800 and 1000 °C, respectively. The presence of DAP alters the composition of ashes converting, almost completely at high temperatures, the metallic oxides into phosphate salts. Thus, decreasing their alkalinity. The micrographs obtained by SEM indicate that pine needles ashes contain large porous particles of carbon compounds and several inorganic particles of irregular shape <1.0 mm, whereas after treating the needles with DAP an amorphous rigid structure was formed.To facilitate our investigation model mixtures of CaCO₃ + DAP, MgCO₃ + DAP, K₂CO₃ + DAP were heat treated under the same conditions used for preparing the ashes. The chemical transformations taken place during heating were studied by analysing the reaction products using thermal analysis and XRD.The physical, mineralogical and chemical forest ash properties determined could be used to evaluate the environmental risk of the use of fire retardants on soils, plants and aquatic systems as well as to investigate the mechanism of combustion of forest fuels in the presence of DAP.