New chiral biscarboline N,N′-dioxide derivatives as catalyst in enantioselective reduction of ketoimines with trichlorosilane

New axial N,N′-dioxide secondary amide derived from l-tryptophan was synthesized and firstly employed in catalytic enantioselective reduction of ketoimines with trichlorosilane. It was found that 4f was an effective catalyst with excellent reactivity and good enantioselectivity. Possible mechanism for the catalytic procedure was tentatively proposed.     

Catalytic enantioselective Strecker reaction of ketoimines using catalytic amount of TMSCN and stoichiometric amount of HCN

Catalyst loading as low as 0.1 mol % was achieved in the enantioselective Strecker reaction of ketoimines. Excellent enantioselectivity was obtained with a combined use of a catalytic amount of TMSCN and a stoichiometric amount of HCN as a reagent, and a chiral gadolinium complex as a catalyst.     

Asymmetric enamide hydrogenation in the synthesis of N-acetylcolchinol: a key intermediate for ZD6126

A synthesis of N-acetylcolchinol, a key intermediate in the synthesis of ZD6126, was developed. The enantiodifferentiating step required the catalytic asymmetric hydrogenation of an enamide. After screening a range of metal and ligand combinations it was found that (S,S)-ⁱPr-FerroTANE Ru(methallyl)₂ and [(S,S)-^tBuFerroTANE Rh(COD)]BF₄ gave both high enantioselectivity (>90% ee) and high catalyst utility (molar S/C = 1000).     

Asymmetric addition of KCN and Ac2O to aldehydes catalyzed by recyclable polymeric salen-Ti(IV) complexes

Polymeric salen-Ti(IV) complexes were employed in the enantioselective O-acetyl cyanation of aldehydes with KCN and Ac₂O. The polymeric catalysts with appropriate crosslinking degree exhibited good activities and enantioselectivities, up to 94% yield and 91% ee were obtained at −20 °C with 1 mol % of catalyst (based on bimetallic catalytic unit). Moreover, the crosslinked polymeric catalyst could be easily recovered and reused for six consecutive runs without obvious decrease in activity and enantioselectivity.     

Polymeric salen-Ti(IV) or V(V) complex catalyzed asymmetric synthesis of O-acetylcyanohydrins from KCN, Ac2O and aldehydes

Polymeric salen-Ti(IV) and V(V) complexes were employed in the enantioselective O-acetyl cyanation of aldehydes with potassium cyanide and acetic anhydride. The crosslinked polymeric salen-Ti(IV) catalyst exhibited good activities and enantioselectivities, up to 91% ee with 99% conversion was obtained at −20 °C with 1 mol% of catalyst (based on bimetallic catalytic unit). Moreover, six consecutive recyclings with the easily recovered crosslinked polymeric catalyst showed no obvious decrease in either activity or enantioselectivity. Linear polymeric salen-V(V) catalyst showed good catalytic efficiency too, up to 94% ee with 99% conversion was obtained at −42 °C with 5 mol% of catalyst.     

Construction of Optically Active Quaternary Propargyl Amines by Highly Enantioselective Zinc/BINOL‐Catalyzed Alkynylation of Ketoimines

A general and efficient method for the highly enantioselective alkynylation of ketoimines through a zinc/1,1′‐bi‐2‐naphthol (BINOL)‐catalyzed process has been developed. A variety of ketoimines, including α‐fluoroalkyl α‐imine esters, α‐aryl α‐imine esters, and trifluoromethyl aryl ketoimines, are applicable and provide their corresponding quaternary propargyl amines in excellent yields with high ee values (up to 99 % ee). Both the steric and electronic effects of substituents at the 3,3′ positions of BINOL are critical for the reaction efficiency and enantioselectivity. To demonstrate the usefulness of the method, (R)‐α‐CF₃ α‐proline has been prepared in a highly efficient manner. The notable features of this protocol are its broad substrate scope, high reaction efficiency (up to 99 %) and enantioselectivity (up to 99 % ee), low catalyst loading (5 mol % of BINOL derivative), and mild reaction conditions.     

Catalytic enantioselective allylation of ketoimines

A general catalytic allylation of simple ketoimines was developed using 1 mol % of CuF.3PPh(3) as catalyst, 1.5 mol % of La(O(i)Pr)(3) as the cocatalyst, and stable and nontoxic allylboronic acid pinacol ester as the nucleophile. This reaction constituted a good template for developing the first catalytic enantioselective allylation of ketoimines. In this case, using LiO(i)Pr as the cocatalyst produced higher enantioselectivity and reactivity than La(O(i)Pr)(3). Thus, using the CuF-cyclopentyl-DuPHOS complex (10 mol %) and LiO(i)Pr (30 mol %) in the presence of (t)BuOH (1 equiv) produced high enantioselectivity up to 93% ee from a range of aromatic ketoimines. Mechanistic studies indicated that LiO(i)Pr accelerates the reaction by increasing the concentration of an active nucleophile, allylcopper.     

Highly sensitive spectrofluorimetric kinetic determination of ultratrace amounts of vanadium(V) based on the oxidation of 1,8-diaminonaphthalene by bromate

A highly sensitive catalytic quenching spectrofluorimetric method was described for the determination of V(V) based on its catalytic effect on the oxidation of 1,8-diaminonaphthalene by potassium bromate with Tiron as an activator in weakly acidic medium and the reaction mechanism was investigated. The reaction was followed spectrofluorimetrically by measuring the fluorescence intensity of 1,8-diaminonathphlene (DAN) (λ_ex=356 nm, λ_em=439 nm) at a fixed time of 5 min from initiation of the reaction. Under the optimum conditions, vanadium(V) can be determined in the range 0.05-50.0 ng ml⁻¹ with a S.D.=0.024 for 15 times measurements. The detection limit of the method was down to 0.0088 ng ml⁻¹ and the catalytic reaction activation energy was found to be 43.92 kJ mol⁻¹. The proposed method was tested for the determination of vanadium(V) in rice and natural water samples.     

Rhodium(I) complexes with 1′-(diphenylphosphino)ferrocenecarboxylic acid as active and recyclable catalysts for 1-hexene hydroformylation

The rhodium complex trans-[Rh(CO)(Hdpf-κP)(dpf-κ²O,P)] (1), (Hdpf = 1′-(diphenylphosphino)ferrocenecarboxylic acid) was used as an efficient and recyclable catalyst for 1-hexene hydroformylation producing ca. 80% of aldehydes at 10 atm CO/H₂ and 80 °C. After the reaction, unchanged complex 1 was separated from the reaction mixture and used again three times with the same catalytic activity. The effect of modifying ligands, phosphines and phosphites, on the reactivity of 1 was investigated. The active catalytic systems containing 1 or trans-[Rh(CO)(L)(dpf-κ²O,P)] (2) were formed in situ from acetylacetonato rhodium(I) precursors [Rh(CO)₂(acac)] (3) or [RhL(CO)(acac)] (4) and Hdpf or Medpf (L = phosphine, Medpf = methyl ester of Hdpf).     

Novel axially chiral bis-arylthiourea-based organocatalysts for asymmetric Friedel-Crafts type reactions

It has been shown that catalytic amounts (10-20 mol %) of novel axially chiral bis-arylthioureas promote the asymmetric organocatalytic Friedel-Crafts type addition of indole and N-methylindole to nitroolefins. The optimum catalyst is capable of promoting the reaction between challenging substrates such as N-methylindole and nitroolefins bearing aliphatic β-substituents with enantioselectivity unprecedented for an organocatalytic system.     

Synthesis of enantiopure (R)-2-(4-methoxy-3-(3-methoxypropoxy)-benzyl)-3-methylbutanoic acid—a key intermediate for the preparation of Aliskiren

The enantioselective hydrogenation of (E)-2-(4-methoxy-3-(3-methoxypropoxy)-benzylidene)-3-methylbutanoic acid (1) to (R)-2-(4-methoxy-3-(3-methoxypropoxy)-benzyl)-3-methylbutanoic acid (2)—a key intermediate in the synthesis of the pharmacologically important renin inhibitor Aliskiren—is described. The stereochemistry of the catalytic transformation has been studied using a number of homogeneous chiral Rh(I) and Ru(II) complexes bearing ferrocene-based phosphine ligands. The highest enantioselectivity for the homogeneous hydrogenation of 1 (up to 95% ee) was achieved with a [Rh(NBD)₂]BF₄ pre-catalyst (substrate/catalyst ratio 100:1, 10 bar H₂, 40 °C, in MeOH). To bring the enantioselectivity to perfection an effective method for the isolation of the enantiopure carboxylic acid is suggested likewise.     

Catalytic enantioselective Strecker reaction of ketoimines

A new method for the catalytic enantioselective Strecker reaction (cyanation) of N-diphenylphosphinoyl ketoimines is described. The asymmetric catalyst is a chiral gadolinium complex prepared from Gd(OiPr)3 and the d-glucose-derived ligand 3 in a 1:2 ratio. The reaction has a broad substrate generality, giving high enantioselectivity from aromatic, ethyl, primary alkyl, and alpha,beta-unsaturated ketoimines. The products could be easily converted to disubstituted alpha-amino acids and their derivatives.     

Conversion of pentynol to pentanone catalysed by Pd(II) metal centres

The cyclization of 3- or 4-pentyn-1-ol is catalysed by PdCl₂ or trans-[PdCl₂L₂] (L = R-camphorimine; R = Ph; Prⁱ; NMe₂) complexes at room temperature affording heterocyclic compounds, respectively, 2-methyl-2-pent-3-ynyloxy-tetrahydrofuran or 2-methyl-2-pent-4-ynyloxy-tetrahydrofuran which subsequently add water to give selectively 5-(2-methyl-tetrahydrofuran-2-yloxy)-pentan-2-one from both starting materials. By hydrolysis 5-(2-methyl-tetrahydrofuran-2-yloxy)-pentan-2-one undergoes ring cleavage to form 5-hydroxy-2-pentanone. The catalytic activity and selectivity of complexes trans-[PdCl₂L₂] (L = R-camphorimine) depend on the characteristics of the R group (NMe₂ > Prⁱ > Ph). The catalytic activity of PdCl₂ is comparable to that of trans-[PdCl₂L₂] (L = Ph-camphorimine) which is the less efficient catalyst.     

Mn(II)-sodium dodecyl sulphate complex mimic enzyme-catalyzed fluorescence quenching of Pyronine B by hydrogen peroxide

Mn(II)-sodium dodecyl sulphate complex (Mn(II)-SDS) is used to mimic the active group of peroxidase. The catalytic characteristic of this mimic enzyme catalyst in the oxidation reaction of fluorescence substrate, tetraethyldiaminoxanthyl chloride (Pyronine B (PB)), with hydrogen peroxide has been studied. The experimental results show that Mn(II)-SDS complex has similar catalytic activity that of peroxidase. The steady-state catalytic rate depends upon mimic enzyme and substrate concentrations, and the Michaelis-Menten parameters K_m, V_max and K_cat are 7.6×10⁻⁶ M, 7.9×10⁻⁷ M s⁻¹ and 7.9 s⁻¹, respectively. The catalytic activity of Mn(II)-SDS complex is compared with those of HRP and Hemin. Though the catalytic activity of Mn(II)-SDS complex is 15.9% of that of HRP, it can catalyze the oxidation reaction of PB with hydrogen peroxide lead to fluorescence quenching of PB. Under optimum conditions, linear relationship between fluorescence quenching F₀/F and concentration of H₂O₂ is in the range of (0.0-3.6) × 10⁻⁷ M. The detection limit is determined to be 3.0×10⁻⁹ M. By coupling this mimic catalytic reaction with the catalytic reaction of glucose oxidase (GOD), glucose can be detected. Linear relationship between F₀/F and concentration of glucose is in the range of (0.0-1.4) × 10⁻⁷ M. The detection limit is determined to be 4.2×10⁻⁹ M. This method is applied to the determination of glucose in human serum and the results are in good agreement with the phenol-4-aminoantipyrine (4-AAP).     

Pd(II)-catalyzed deprotection of acetals and ketals containing acid sensitive functional groups

The pincer complex [Pd(C¹,O¹,N¹-L)(NCMe)]ClO₄ (L = monoanionic ligand resulting from deprotonation of the acetyl group of the dimethyl monoketal of 2,6-diacetylpyridine) is used for the high-yield and selective catalytic hydrolysis of aliphatic, aromatic, cyclic, and acyclic dimethyl-acetals, -ketals, and dioxolanes, even in the presence of large substituents. Other protecting groups, such as THP or TBDMS, or very acid-sensitive alcohols were not affected. The catalyst is easily prepared in high yield from Pd(AcO)₂ and 2,6-diacetylpyridinium perchlorate stable to air and moisture, easily and fully recoverable and reusable.     

Vinyl polymerization of norbornene catalyzed by a series of bis(β-ketoiminato)nickel (II) complexes in the presence of methylaluminoxane

A series of nickel complexes with β-ketoiminato ligands based on pyrazolone derivative were synthesized and characterized, which are highly active catalyst precursors for norbornene polymerization under mild reaction conditions through a vinyl-type polymerization mechanism. The catalytic activity could be up to 3.38 × 10⁷ g polymer/mol Ni h. The molecular weight distributions of the polynorbornenes (M_w/M_n = 2.05-2.56) indicate the presence of a single active species in the polymerization process.     

Catalytic activity of η-(olefin)palladium(0) complexes with iminophosphine ligands in the Suzuki-Miyaura reaction. Role of the olefin in the catalyst stabilization

The catalytic activity of η²-(olefin)palladium(0)(iminophosphine) complexes in the Suzuki-Miyaura coupling is strongly dependent on the reaction conditions and on the nature of the ligands. The reaction is at the best carried out in aromatic solvents in the presence of K₂CO₃ at 90-110 °C. Higher reaction rates are obtained when the R substituent on the N-imino group is an aromatic group of low steric hindrance and the olefin is a moderate π-accepting ligand such as dimethyl fumarate. At temperatures lower than 90 °C, a self-catalyzed process leading to catalyst deactivation becomes predominant. Preliminary mechanistic investigations indicate that the oxidative addition of the aryl bromide to a Pd(0) species is the rate determining step in the catalytic cycle and that the olefin plays a key role in catalyst stabilization. Systems in situ prepared by mixing Pd(OAc)₂ or Pd(dba)₂ with 1 equiv of iminophosphine appear substantially less active than the preformed catalysts.     

The WCl6-e-Al-CH2Cl2 catalyzed polypentenamer formation via ring-opening metathesis polymerization (ROMP)

The synthesis of polypentenamer by an electrochemically generated metathesis polymerization catalyst from methylene chloride solution of WCl₆ was investigated. The active species formed by electroreduction of this salt under controlled potential of +900 mV at a platinum cathode with an aluminum anode were found to catalyze the ring-opening metathesis polymerization (ROMP) of cyclopentene, monocyclic olefin of relatively low strain, in high yield (89%) and at short period (32 min) under mild conditions. The effect of reaction parameters, e.g., olefin/catalyst ratio, reaction time, electrolysis time, catalyst aging, on the polymerization yield have been studied. The resulting polymer has been characterized by ¹H and ¹³C NMR, IR and gel permeation chromatography (GPC) techniques. Analysis of the polypentenamer microstructure by means of ¹³C NMR spectroscopy indicates that the polymer contains a mainly trans stereoconfiguration of the double bonds (σ_c = 0.31) and a slightly blocky distribution (r_tr_c > 1) of cis and trans double bond dyads (r_tr_c = 1.44). However, this electrochemical system is reluctant to facilitate the competing vinyl type addition polymerization reactions.     

Synthesis and characterization of para-nitro substituted 2,6-bis(phenylimino)pyridyl Fe(II) and Co(II) complexes and their ethylene polymerization properties

Four iron(II) and cobalt(II) complexes ligated by 2,6-bis(4-nitro-2,6-R₂-phenylimino)pyridines, LMCl₂ (1: R = Me, M = Fe; 2: R = iPr, M = Fe; 3: R = Me, M = Co; 4: R = iPr, M = Co) have been synthesized and fully characterized, and their catalytic ethylene polymerization properties have been investigated. Among these complexes, the iron(II) pre-catalyst bearing the ortho-isopropyl groups (complex 2) exhibited higher activities and produced higher molecular weight polymers than the other complexes in the presence of methylaluminoxane (MAO). A comparison of 2 with the reference non-nitro-substituted catalyst (2,6-bis(2,6-diisopropylphenylimino)pyridyl)FeCl₂ (FeCat 5) revealed a modest increase of the catalytic activity and longer lifetime upon substitution of the para-positions with nitro groups (activity up to 6.0 × 10³ kg mol⁻¹ h⁻¹ bar⁻¹ for 2 and 4.8 × 10³ kg mol⁻¹ h⁻¹ bar⁻¹ for 5), converting ethylene to highly linear polyethylenes with a unimodal molecular weight distribution around 456.4 kg mol⁻¹. However, the iron(II) pre-catalyst 1 on changing from ortho-isopropyl to methyl groups displayed much lower activities (over an order of magnitude) than 2 under mild conditions. As expected, the cobalt analogues showed relatively low polymerization activities.     

Ruthenium-catalyzed cyclization of 3-en-1-ynyl imines with nucleophiles via tandem 5-exo-dig cyclization and nucleophilic addition

Treatment of 3-en-1-ynyl imines with TpRuPPh₃(CH₃CN)₂PF₆ catalyst (1 mol %) in DCE (50 °C, 6 h) effected catalytic cyclization with suitable nucleophiles and gave functionalized pyrroles in good yields. The reaction mechanism is proposed to proceed via (2-pyrrolyl)carbenoid intermediates derived from 5-exo-dig cyclization. This catalytic reaction works well with various nucleophiles, including water, alcohols and anilines.