Fabrication of Hollow or Macroporous Silica Particles by Spray Drying of Colloidal Dispersion

In this study, hollow silica particles were fabricated by atomizing the dispersion of silica nanocolloids synthesized by modified Stober method and self-organization of the particles by spray drying technique. Rapid evaporation of the droplet containing the silica nanoparticles resulted in the formation of hollow microparticles at high evaporation temperature due to hydrodynamic instability of the droplet. Similar strategy was adopted for the fabrication of macroporous silica particles by the sol spray drying of the hetero-colloidal dispersion of polystyrene nanospheres and commercial silica nanoparticles. The morphologies of the porous particles were observed by scanning electron microscope with varying drying temperature. As a demonstrative purpose, the results using emulsion droplets as confining geometry was compared with the porous particles obtained from spray dryer. Collectively, spray drying was found to be more efficient manner to prepare the porous materials with continuous way in the view of production efficiency and time.     

双亲性离子液体功能化复合胶体颗粒的合成与催化性能

采用硅烷偶联剂4-氯苄基三氯硅烷对二氧化硅颗粒表面进行改性, 制得表面接枝氯苄基的亲油二氧化硅颗粒. 在亲油二氧化硅颗粒表面继续接枝亲水性的十二烷基咪唑, 即可制得含有离子液体基团的双亲性二氧化硅颗粒. 通过静电吸附氯铂酸和硼氢化钠还原, 可在两亲性二氧化硅颗粒表面负载铂纳米颗粒, 从而得到双亲性二氧化硅颗粒催化剂. 用扫描电镜、 透射电镜、 X射线衍射和红外光谱等对所得样品进行表征, 并以苯甲醇氧化反应为研究对象对催化剂性能进行评价, 结果显示, 使用此催化剂可使苯甲酸的产率达到90%.     

Synthesis and properties of sol-gel submicron silica powders doped with partly oxidized iron particles

Magnetic powders based on metallic iron crystallites encapsulated in submicron-sized spherical silica particles have been obtained and investigated. The metallic iron clusters have been produced by the exploding wire method. The silica shells have been prepared via the modified sol-gel Stöber method and the metallic particles have been entrapped by occlusion during the silica powder formation. The entrapped iron particles are partially oxidized due to the nature of the synthetic methods employed. The obtained hybrid materials have been investigated by electron microscopy, X-ray diffraction, magnetic and ζ-potential techniques. Such materials can be employed in such applications as e.g. magnetically-controlled drug vectors or electromagnetic field-shielding.     

Improvement in gas separation properties of a polymeric membrane through the incorporation of inorganic nano‐particles

The present work tries to introduce a high‐performance nano‐composite membrane by using polydimethylsiloxane (PDMS) as its main polymer matrix to meet some specific requirements in industrial gas separations. Different nano‐composite membranes were synthesized by incorporating various amounts of nano‐sized silica particles into the PDMS matrix. A uniform dispersion of nano‐particles in the host membranes was obtained. The nano‐composite membranes were characterized morphologically by scanning electron microscopy and atomic force microscopy. Separation properties, permeability, and ideal selectivity of C₃H₈, CH₄, and H₂ through the synthesized nano‐composite membranes with different nano‐particle contents (0.5, 1, 1.5, 2, 2.5, and 3 wt%) were investigated at different pressures (2, 3, 4, 5, 6, and 7 atm) and constant temperature (35°C). It was found out that a 2 wt% loading of nano‐particles into the PDMS matrix is optimal to obtain the best separation performance. Afterwards, sorption experiments for the synthesized nano‐composite membranes were carried out, and diffusion coefficients of the gases were calculated based on solution‐diffusion mechanism. Gas permeation and sorption experiments showed an increase in sorption and a decrease in diffusion coefficients of the gases through the nano‐composite membranes by adding nano‐particles into the host polymer matrix. Copyright © 2011 John Wiley & Sons, Ltd.     

以微凝胶模板合成P(AM-co-DMC)/SiO_2杂化粒子

以聚(丙烯酰胺-co-甲基丙烯酰氧乙基三甲基氯化铵)[P(AM-co-DMC)]微凝胶为模板,TMOS为硅前驱体,中性水环境下合成了一系列P(AM-co-DMC)/SiO2有机-无机杂化粒子.对杂化粒子的大小、形态及表面形貌等进行研究,发现微凝胶对杂化粒子的形态和大小起主导作用,SiO2在模板上沉积,即使经过灼烧依然保持模板的形态;TMOS的用量对杂化粒子的性质也有重要影响——用量少时,得到的杂化粒子表面粗糙,增加用量会使表面变得光滑.杂化粒子经过灼烧后,表面会变得更加粗糙.     

Feasibility of ultra high performance supercritical neat carbon dioxide chromatography at conventional pressures

The implementation of columns packed with sub-2 μm particles in supercritical fluid chromatography (SFC) is described using neat carbon dioxide as the mobile phase. A conventional supercritical fluid chromatograph was slightly modified to reduce extra column band broadening. Performances of a column packed with 1.8 μm C18-bonded silica particles in SFC using neat carbon dioxide as the mobile phase were compared with results obtained in ultra high performance liquid chromatography (UHPLC) using a dedicated chromatograph. As expected and usual in SFC, higher linear velocities than in UHPLC must be applied in order to reach optimal efficiency owing to higher diffusion coefficient of solutes in the mobile phase; similar numbers of theoretical plates were obtained with both techniques. Very fast separations of hydrocarbons are presented using two different alkyl-bonded silica columns.     

草莓型PMMA/SiO_2有机-无机复合微球的合成与表征

在纳米二氧化硅水分散介质中,借助于正离子单体甲基丙烯酰氧乙基三甲基氯化铵(MTC)与未改性纳米二氧化硅颗粒之间的电荷作用,通过MTC与甲基丙烯酸甲酯(MMA)的自由基共聚合,制备了草莓型的PMMA/SiO2复合微球.整个制备反应过程中,纳米二氧化硅无需表面处理,体系中无需另外加入乳化剂或助乳化剂,微球表面吸附的纳米二氧化硅对颗粒起稳定作用.详细讨论了纳米二氧化硅初始添加量、MTC浓度对复合微球的平均粒径、复合微球中二氧化硅含量及微球形态的影响.动态光散射粒度分布仪(DLS)测得复合微球粒径在180~300 nm之间,热重分析(TGA)表明复合微球中二氧化硅含量介于16.4%~40.8%之间.透射电镜(TEM)显示所得复合微球具有草莓型结构,二氧化硅于表面富集.     

Fractal Characterization of Silica Sol Prepared by the Sol-Gel Method: From the Sol Formation to the Flocculation Process

The fractal characterization of silica particles prepared by the sol-gel method was obtained; from the beginning of the sol-gel synthesis to the aggregation process of these particles by adding metal ions in solution, the fractal dimension was determined. At the beginning of the sol-gel process, unstable structures were formed due, essentially, to the auto-catalytic nature of the sol-gel condensation reactions; these particles are fractal structures with a fractal exponent corresponding to a reaction limited aggregation regime. As the time proceeds, the reactants are consumed approaching the system to equilibrium, stabilizing the size of the silica particles. The silica sol can be flocculated by adding metal ions in solution. The fractal exponent for the aggregation process was determined, obtaining a value corresponding to a diffusion limited aggregation regime.     

The Effect of Gelatin on the Preparation of Silica Coated Iron Particles

A method is described for coating fine iron particles(～1μm) with a uniform silica layer,produced by the hydrolysis of tetraethyl orthosilicate.The presence of a small amount of gelatin on the surface of the iron particles facilitates this process.The X-ray photoelectron measurements indicated that the gelatin interacted with the surface of the iron particles by means of both nitrogen(in -NH2 groups) and oxygen(in -COOH groups) and then bound to the silica.The silica coating increases the resistance of the iron particles to oxidation on heating in air,which makes the temperature at which an observable oxidization occurs from 330 ℃ to 400 ℃ raised.     

Preparation of Tin Oxide-Based Metal Oxide Particles

Tin oxide-doped hybrid particles were prepared by a wet chemical process with organic-inorganic (phenyl/silica) hybrid particles in an alcoholic solution. The phenyl/silica hybrid particles, with a diameter of ca. 790 nm were used as a new support material for tin oxide (SnO₂) particles from tin(IV) chloride. The surface of the particles was modified via nitration of aromatic groups in the particles, to promote formation of the tin oxide coating on the particles. The thickness and surface morphology of the tin oxide layer coated on the nitrated-phenyl/silica hybrid particles could be controlled by varying the tin(IV) chloride concentration and reaction time. The size and morphology of the resultant particles were investigated with field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The particles obtained were also characterised by infrared (FTIR) and solid-state ¹³C magic angle spinning nuclear magnetic resonance (¹³C-CP/MAS NMR) spectroscopy. The effect of processing parameters on the crystallinity and structure of the doped hybrids were confirmed by X-ray diffraction (XRD) patterns.     

Kinetics of the Growth of Supramolecular Crystals in a Suspension of Monodisperse Spherical Silica Particles

Kinetics of the supramolecular crystallization of monodisperse spherical silica particles (MSSP) suspended in diethyl ether with a concentration of structural units close to the phase transition point has been studied for the first time. It was found that the linear crystal growth rate depends on temperature and the process activation energy is 25 kcal/mol. The linear law of crystal growth is associated with diffusion of the structural units on the interface.     

含氟硅丙烯酸酯乳液超疏水膜中疏水基团的梯度分布与表面微观结构研究

利用含氟疏水基团的梯度分布,结合草莓形纳米SiO2粒子提供的双重粗糙表面,制备了具有类"荷叶效应"的超疏水涂膜,水接触角达(174.2±2)°,滞后角几乎接近0°.通过原子力显微镜、扫描电镜和水接触角的测试对膜表面形貌及疏水性能进行了表征;探讨了其表面微观结构与表面疏水性能的关系.草莓形复合粒子在膜表面的无规则排列赋予涂膜表面不同等级的粗糙度,使水滴与涂膜表面接触时能够形成高的空气捕捉率,这种微观结构与疏水基团的梯度分布相结合,赋予了含氟硅丙烯酸酯乳液涂膜表面超疏水性能.     

Organosilsesquioxane Particles Prepared by Controlled Sol-Gel Process or Heterocondensation with Colloidal Silica Particles: A Novel Route Towards Nanoporous Silica Particles by a Templating Effect

Hybrid organic-inorganic particles containing labile organic templates have been prepared by either controlled Sol-Gel processing or co-condensation of colloidal silica particles with organosilicon precursors. Chemical removal of the templating organic spacer led to monomodal, microstructured porous silica particles exhibiting up to 50% porosity. Particle size and distribution, and porosity varied depending upon the process and the chemistry used to remove the porogen organic groups.     

Effect of soluble polymer binder on particle distribution in a drying particulate coating

Soluble polymer is frequently added to inorganic particle suspensions to provide mechanical strength and adhesiveness to particulate coatings. To engineer coating microstructure, it is essential to understand how drying conditions and dispersion composition influence particle and polymer distribution in a drying coating. Here, a 1D model revealing the transient concentration profiles of particles and soluble polymer in a drying suspension is proposed. Sedimentation, evaporation and diffusion govern particle movement with the presence of soluble polymer influencing the evaporation rate and solution viscosity. Results are summarized in drying regime maps that predict particle accumulation at the free surface or near the substrate as conditions vary. Calculations and experiments based on a model system of poly(vinyl alcohol) (PVA), silica particles and water reveal that the addition of PVA slows the sedimentation and diffusion of the particles during drying such that accumulation of particles at the free surface is more likely.     

Synthesis of raspberry‐like silica/polystyrene/silica multilayer hybrid particles via miniemulsion polymerization

Organic–inorganic hybrid particles have many potential applications, but almost all research has been focused on hybrid particles with one kind of inorganic nanoparticle. This article presents a novel and facile preparation approach for raspberry‐like silica/polystyrene/silica multilayer hybrid particles via miniemulsion polymerization. In this method, larger, surface‐modified silica particles are first dispersed into monomer droplets to form a miniemulsion, and then raspberry‐like silica/polystyrene/silica multilayer hybrid particles are directly obtained when miniemulsion polymerization is performed in the presence of smaller, unmodified silica particles with 4‐vinylpyridine as an auxiliary monomer. Influential parameters such as the amount of 4‐vinylpyridine, the surfactant concentration, and the pH value of the system have been investigated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1028–1037, 2007     

SiO_2/PVAc无机-有机复合微球的合成及其膜性能研究

以纳米二氧化硅粒子(SiO2)为稳定剂,在少量反应型阴离子乳化剂——烯丙氧基羟丙磺酸钠(HAPS)作助稳定剂的情况下,制备了具有草莓型结构的二氧化硅/聚醋酸乙烯酯(SiO2/PVAc)无机-有机纳米复合微球.研究表明,纳米SiO2与PVAc的氢键作用是形成这种单分散草莓型SiO2/PVAc无机-有机纳米复合微球的关键.透射电镜(TEM)观察显示,纳米SiO2吸附在PVAc表面,形成草莓型结构.讨论了纳米二氧化硅溶胶的种类和用量、乳化剂种类对复合微球形态及其膜性能的影响,并讨论了复合微球的形成机理.     

单分散SiO2体系制备中TEOS水解动力学研究

采用一种与他人不同的萃取－冷冻分离－气相色谱法，跟踪形成单分散二氧化硅体系条件下正硅酯乙酯（TEOS）的水解过程，考察了温度（25～45℃）、氨浓度（0．5～0．2mol•L－1）、水浓度（6．0～15．0mol•L－1）等实验条件范围内，以上实验参数对TEOS水解速度的影响；并回归得到目前适用于在乙醇介质中氨催化下，形成单分散二氧化硅微粒常用实验条件范围内，唯一的较完整的水解动力学方程式．     

Defining the characteristics of spherical Janus particles by investigating the behavior of their corresponding particles at the oil/water interface in a Pickering emulsion

In this study, a new analytical/experimental method is proposed in order to investigate the adsorption of different-sized spherical silica particles at the oil/water interface in a Pickering emulsion system as a well-known method to produce Janus particles. Accordingly, the characteristic of the produced silica Janus particles was defined based on their penetration depth into dispersed oil droplets. To ensure the accuracy of the method, the penetration depth of silica particles was also measured using field emission scanning electron microscopy images of solidified oil droplets covered with particles. The results revealed that the penetration depth increases with the size of the particles.     

应用于热控的壳厚可控核壳结构SiO2@TiO2颗粒制备

利用St觟ber方法合成了平均粒径在800 nm,球形度、单分散性良好的SiO2微球,再将其作为制备核壳结构SiO2@TiO2颗粒的内核。利用钛酸四丁酯水解反应,在SiO2内核上包覆制备了壳厚在30～100 nm的TiO2壳层,TiO2壳层厚度可根据水解反应中钛酸四丁酯的量调控。将制得的SiO2@TiO2核壳结构颗粒在550℃煅烧1 h,氧化钛壳层的晶型转变为锐钛矿相,晶型转变为锐钛矿相的TiO2更适合作为填料应用于近红外反射涂层。本文合成厚度可控SiO2@TiO2微球的方法是一种改进的溶胶凝胶方法,即在溶胶凝胶方法的基础上增加水热合成工艺。另外,本合成方法工艺简单,无表面活性剂或者耦合剂的引入。     

水热法制备稳定的发光CdTe材料

采用水热合成技术将表面修饰有羧基的纳米CdTe微粒与表面活性剂和硅源进行自组装,得到了一种与氧化硅复合的稳定的CdTe发光材料.通过一系列表征手段(如TG-DTA,EDX,TEM,荧光光谱和N₂吸附)证实了CdTe微粒复合在氧化硅中.进一步通过烧结的方法除去表面活性剂,用稀酸除去金属氧化物,即得到多孔的氧化硅材料.