Equilibrium structure and dynamics of (2R, 3R)-(+)-bis(decyloxy)succinic acid at the air-water interface

A twin-tailed, twin-chiral fatty acid, (2R,3R)-(+)-bis(decyloxy)succinic acid was synthesized and its two dimensional behavior at the air-water interface was examined. The pH of the subphase had a profound effect on the monolayer formation. On acidic subphase, stable monolayers with increased area per molecule due to hydrogen bonding and bilayers at collapse pressures were observed. Highly compressible films were formed at 40 degrees C, while stable monolayers with increased area were observed at sub-room temperatures. Langmuir monolayers formed on subphases containing 1 mM ZnCl2 and CaCl2 revealed two dimensional metal complex formation with Zn2+ forming a chelate-type complex, while Ca2+ formed an ionic-type complex. Monolayers transferred from the condensed phase onto hydrophilic Si(100) and quartz substrates revealed the formation of bilayers through transfer-induced monolayer buckling. Compression induced crystallites in 2D from monolayers and vesicle-like supramolecular structures from multilayers were the noted LB film characteristics, adopting optical imaging and electron microscopy. The interfacial monolayer structure studied through molecular dynamics simulation revealed the order and packing at a molecular level; monolayers adsorbed at various simulated specific areas of the molecule corroborated the (pi-A) isotherm and the formation of a hexagonal lattice at the air-water interface.     

Synthesis and supramolecular self-assembly study of a novel porphyrin molecule in Langmuir and Langmuir-Blodgett films

The self-assembly and supramolecular engineering of porphyrins into ordered arrays have recently attracted much interest because of their promising application potential in molecular and electronic devices, spintronics, energy harvesting and storage, catalysis, and sensor development. We herein report the synthesis and supramolecular self-assembly study of a novel porphyrin molecule, 2Por-TAZ, in Langmuir and Langmuir-Blodgett films. The 2Por-TAZ molecule contains two porphyrin macrocycles attached to a triaminotriazine headgroup. Triaminotriazines are known to form a highly ordered linear supramolecular self-assembly through complementary hydrogen bonding with barbituric acid molecules at the air-water interface. Surface pressure-area isotherm measurements and polarized UV-vis absorption spectroscopic studies indicate that the 2Por-TAZ molecules adopted an edge-on orientation at the air-water interface. Polarized UV-vis absorption study also revealed that the 2Por-TAZ molecules formed linear supramolecular networks on pure water and barbituric acid subphase with porphyrin flat planes facing toward the compression direction. The binding of barbituric acid with 2Por-TAZ molecules was observed from the expansion of the Langmuir monolayer film. Compared to the transferred LB film from pure water subphase, both the UV-vis absorbance and fluorescence emission intensity of the LB film transferred from barbituric acid subphase increased significantly.     

Use of UV-vis reflection spectroscopy for determining the organization of viologen and viologen tetracyanoquinodimethanide monolayers

UV-vis reflection spectroscopy has been used for proving in situ the organization of pure viologen and hybrid viologen tetracyanoquinodimethanide monolayers at the air-water interface. Other more classical measurements concerning Langmuir monolayers, including surface pressure-area and surface potential-area isotherms, are also provided. The organization of the viologen in the Langmuir monolayer was investigated upon the different states of compression, and the tilt angle of the viologen moieties with respect to the water surface was determined. A gradual transition of the viologen molecules from a flat orientation in the gas phase to a more tilted position with respect to the water surface in the condensed phases occurs. The addition of a tetracyanoquinodimethane (TCNQ) salt in the subphase leads to the penetration of TCNQ anions into the positively charged viologen monolayer forming a hybrid viologen tetracyanoquinodimethanide film where a charge-transfer interaction between the two moieties is observed. From a quantitative analysis of the reflection spectra, an organization model of these hybrid monolayers at the air-water interface is proposed, suggesting a parallel arrangement of viologen and TCNQ units with a 1:2 stoichiometry.     

Structure and orientation changes of omega- and gamma-gliadins at the air-water interface: a PM-IRRAS spectroscopy and Brewster angle microscopy study

Microscopic and molecular structures of omega- and gamma-gliadin monolayers at the air-water interface were studied under compression by three complementary techniques: compression isotherms, polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS), and Brewster angle microscopy (BAM). For high molecular areas, gliadin films are homogeneous, and a flat orientation of secondary structures relative to the interface is observed. With increasing compression, the nature and orientation of secondary structures changed to minimize the interfacial area. The gamma-gliadin film is the most stable at the air-water interface; its interfacial volume is constant with increasing compression, contrary to omega-gliadin films whose molecules are forced out of the interface. gamma-Gliadin stability at a high level of compression is interpreted by a stacking model.     

Langmuir monolayers of a photoisomerizable macrocycle surfactant

An amphiphilic photoisomerizable macrocycle has been prepared that forms stable Langmuir monolayers at the air-water interface. The hydrophilic core of the molecule switches between closed and open isomers upon irradiation by the appropriate wavelengths of light. Isotherm measurements, Brewster angle microscope images, and atomic force micrographs (of transferred Langmuir-Blodgett films) suggest a phase transition between a face-on to a tilted edge-on molecular orientation as a function of surface concentration. In the face-on phase, in situ photoisomerization results in a reversible increase in surface pressure due to greater molecular crowding in the open configuration.     

Supramolecular architecture in Langmuir and Langmuir-Blodgett films incorporating a chiral azobenzene

This article describes the synthesis and fabrication of Langmuir and Langmuir-Blodgett (LB) films incorporating a chiral azobenzene derivative, namely, ( S)-4- sec-butyloxy-4'-[5'-(methyloxycarbonyl)pentyl-1'-oxy]azobenzene, abbreviated as AZO-C4(S). Appropriate conditions for the fabrication of monolayers of AZO-C4(S) at the air-water interface have been established, and the resulting Langmuir films have been characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and UV-vis reflection spectroscopy. The results indicate the formation of an ordered trilayer at the air-water interface with UV-vis reflection spectroscopy showing a new supramolecular architecture for multilayered films as well as the formation of J aggregates. Films were transferred onto solid substrates, with AFM revealing well-ordered multilayered films without 3D defects. Infrared and UV-vis absorption spectroscopy indicate that the supramolecular architecture may be favored by the formation of H bonds between acid groups in neighboring layers and pi-pi intermolecular interactions. Circular dichroism spectra reveal chiro-optical activity in multilayered LB films.     

Pure and mixed films of a nitrostilbene derivative at the air-water interface, Langmuir-Blodgett multilayer fabrication, and optical characterization

This paper reports the preparation and characterization of pure Langmuir and Langmuir-Blodgett (LB) films of a stilbene derivative containing two alkyl chains, namely 4-dioctadecylamino-4'-nitrostilbene. Mixed films incorporating docosanoic acid and the stilbene derivative are also studied. Brewster angle microscopy (BAM) analysis has revealed the existence of randomly oriented three-dimensional (3D) aggregates, spontaneously formed immediately after the spreading process of the stilbene derivative onto the water surface. These 3D aggregates coexist with a Langmuir film that shows the typical gas, liquid, and solid-like phases in the surface pressure and surface potential vs area per molecule isotherms, indicative of an average preferential orientation of the stilbene compound at the air-water interface, and a gradual molecular arrangement into a defined structure upon compression. A blue shift of 55 nm of the reflection spectrum of the Langmuir film with respect to the spectrum of a chloroform solution of the nitrostilbene indicates that two-dimensional (2D) H-aggregates are formed at the air-water interface. The monolayers are transferred undisturbed onto solid substrates with atomic force microscopy (AFM) revealing that the one layer LB films are constituted by a monolayer of the stilbene derivative together with some 3D aggregates. When the nitrostilbene compound is blended with docosanoic acid, the 3D aggregation is avoided in the Langmuir and Langmuir-Blodgett films, but does not limit the formation of 2D H-aggregates, desirable for second-order nonlinear optical response in the blue domain. The AFM images of the mixed LB films show that they are formed by a docosanoic acid monolayer and, on the top of it, a bilayer of the stilbene derivative.     

Interfacial molecular recognition of dissolved thymine by medium chain dialkyl melamine-type monolayers

Systems consisting of an amphiphilic melamine-type monolayer and a pyrimidine derivative dissolved in the aqueous subphase are good candidates for the formation of interfacial supramolecular assemblies by molecular recognition of hydrogen-bond nonsurface-active species. In the present work, the change in the thermodynamic, phase, and structural properties as a result of molecular recognition of dissolved thymine by 2,4-di(n-undecylamino)-6-amino-1,3,5-triazine (2 C11H23-melamine) monolayers is studied. The combination of surface pressure studies with Brewster angle microscopy (BAM) imaging and grazing incidence X-ray diffraction (GIXD) measurements is optimal for the characterization of the change in structure and phase behavior at the interfacial recognition process. The molecular recognition of the nonsurface-active thymine dissolved in aqueous subphase changes drastically the characteristic features (surface pressure-area isotherms, morphology of the condensed phase domains) of the 2 C11H23-melamine monolayer. It is demonstrated that the kinetics of the recognition process affect largely the main characteristics (phase behavior, morphology of the condensed phase domains) of the interfacial system. The monolayers of 2 C11H23-melamine-thymine assemblies form dumbbell-shaped condensed phase domains not yet observed in other Langmuir monolayers so far. GIXD results show that the molecular recognition of thymine causes only quantitative changes in the two-dimensional lattice structure. Complementary hydrogen bonding of two thymine molecules by one 2 C11H23-melamine molecule is concluded from the chemical structure of both components. Additional information about the nature of the hydrogen bonding on the basis of supramolecular assemblies is obtained by using the quantum chemical PM3 approximation. Energy and lengths of the hydrogen bonds of the optimized thymine-2 C11H23-melamine-thymine structure are calculated.     

Effect of interfacial molecular recognition of non-surface-active species on the main characteristics of monolayers

Recent progress in studies of the main characteristics of supramolecular assemblies formed by interfacial molecular recognition between an amphiphilic monolayer and a non-surface-active species, which is dissolved in the aqueous subphase, by complementary hydrogen bonding and/or electrostatic interaction at the air-water interface is reviewed. Systems consisting of an amphiphilic melamine-type monolayer and an pyrimidine derivative dissolved in the aqueous subphase are representative model systems for molecular recognition on the basis of complementary hydrogen bonding. Most of the studies have been performed with 2,4-di(n-undecylamino)-6-amino-1,3,5-triazine (2C11H23-melamine) monolayers as host component and thymine, uracil or barbituric acid as dissolved non-surface-active pyrimidine derivatives. The combination of surface pressure studies with Brewster angle microscopy (BAM) imaging and Grazing incidence X-ray diffraction (GIXD) measurements is optimal for the characterization of the change in structure and phase behavior at the interfacial recognition process. The molecular recognition of all pyrimidine derivatives dissolved in the aqueous subphase changes drastically and in a specific way the characteristic features (pi-A isotherms, morphology of the condensed phase domains) of the 2C11H23-melamine monolayer. The small condensed phase domains of the pure 2C11H23-melamine monolayer are compact without an inner texture. The monolayers of the supramolecular 2C11H23-melamine entities with thymine or uracil form specifically well-shaped condensed phase domains with an inner alkyl chain texture essentially oriented parallel to the periphery. The completely different morphology of the 2C11H23-melamine-barbituric acid monolayers is characterized by the formation of large homogeneous areas of condensed phase that transfer at smaller areas per molecule to a homogeneous condensed monolayer. The striking differences in the main characteristics between the supramolecular entities are related to their different chemical structures: complementary hydrogen bonding of two thymine or uracil molecules by one 2C11H23-melamine molecule and a linearly extended hydrogen bonding network between 2C11H23-melamine and barbituric acid. The high values of hydrogen bonding energy obtained by quantum chemical calculations on the basis of the semi-empirical PM3 method state the high stability of the supramolecular entities. The GIXD results reveal that the formation of hydrogen-bond based superstructures between the polar head groups of the amphiphilic 2C11H23-melamine monolayer and the non-surface-active pyrimidine derivatives gives rise only to quantitative changes in the two-dimensional lattice structure of the alkyl chains. The alternative possibility to construct interfacial molecular recognition systems on the basis of acid-base interaction is demonstrated by the experimental results obtained by molecular recognition of the heptadecyl-benzamidinium chloride monolayers with dissolved non-surface-active phenylacetate ions. The formation of supramolecular assemblies causes also drastical changes of the surface features in these systems. Here, the development of a substructure in the condensed phase domains consisting of long filigree strings and the favoured formation of bilayers overgrowing the strings indicates a linearly extended amidinium-carboxylate interfacial structure of the base and acid component in alternating sequence.     

Structural properties and Raman spectroscopy of lipid Langmuir monolayers at the air-water interface

Spectra of octadecylamine (ODA) Langmuir monolayers and egg phosphatidylcholine (PC)/ODA-mixed monolayers at the air-water interface have been acquired. The organization of the monolayers has been characterized by surface pressure-area isotherms. Application of polarized optical microscopy provides further insight in the domain structures and interactions of the film components. Surface-enhanced Raman scattering (SERS) data indicate that enhancement in Raman spectra can be obtained by strong interaction between headgroups of the surfactants and silver particles in subphase. By mixing ODA with phospholipid molecules and spreading the mixture at the air-water interface, we acquired vibrational information of phospholipid molecules with surfactant-aided SERS effect.     

Enantioselective recognition of phenylalanine by a chiral amphiphilic macrocycle at the air-water interface: a copper-mediated mechanism

The synthesis of a new chiral amphiphilic calix[4]resorcinarene, tetrakis(N-methylprolyl)tetraundecylcalix[4]resorcinarene (L-RA-Pro), bearing four L-prolyl moieties at the macrocyclic upper rim and four undecyl chains at the lower rim is described. This synthesis has been carried out via a Mannich-type reaction of L-proline and formaldehyde. It has been shown by means of Langmuir balance technique that L-RA-Pro self-assemble as well-defined monomolecular layers at the air-water interface. The effect of various cations on the stability of these monolayers has been studied. The experiments reveal that while there is a slight stabilization effect of K+, Cd2+, Co2+, Mg2+, and Ni2+, there is a high decrease in the collapse pressure in the presence of Cu(II) cation, showing that monolayers of L-RA-Pro, formed at the air-water interface, have a certain selectivity for copper(II) ions with regard to other cations tested. This supramolecular complex exhibits enantioselective recognition properties vs phenylalanine; the mechanism of this interaction is discussed.     

Nanoaggregate shapes at the air/water interface

Chiral interfaces and molecular recognition phenomena are of special interest not only for the understanding of biological recognition processes but also for the potential application in material science. Langmuir monolayers at the air-water interface have successfully been used as simple models to mimic biological phenomena. Recent experimental studies revealed that both chirality and molecular recognition processes of amphiphiles are controlling the features of the nano-aggregates at the air/water interface. The objective of experimental studies has been to gain information about the properties of mesoscopic length scale aggregates obtained on the basis of chiral discrimation effects and the formation of supramolecular entities by molecular recognition of non-surface active species dissolved in the aqueous subphase. Differences in the two-dimensional morphology and lattice structures of the nano-aggregates cannot be explained by macroscopic theories and needed information about the detailed orientation and distance dependence of the intermolecular interaction within the aggregates. First new bottom-up studies have been directed toward understanding the driving forces for the aggregation processes of monolayers. Different types of interactions have been successfully considered using semi-empirical quantum chemical methods. The possibilities of Langmuir-Blodgett (LB) patterning to be an alternative paradigm for large-area patterning with mesostructured features are discussed.     

Semifluorinated chains in 2D-(perfluorododecyl)-alkanes at the air/water interface

Langmuir monolayers of a homologous series of perfluorododecyl-n-alkanes (general formula F(CF2)12(CH2)nH, abbreviated as F12Hn, where n = 6-20) are investigated through isotherms of surface pressure (pi) and electric surface potential (DeltaV) versus area (A) and quantitative Brewster angle microscopy. The investigated monolayers are found to be liquid in nature. The negative sign of the measured surface potential evidences the orientation of all the investigated molecules with their perfluorinated parts directed toward the air regardless of the length of the hydrogenated unit. Analysis of the direction of the molecular dipole moment with respect to the main axis indicates that the minimum effective dipole moment is achieved for a molecule oriented at an angle of about 35 degrees to the surface normal. The film thickness was evaluated from the relative intensity measurements. The results suggest that the F12Hn molecules are tilted to the interface in the vicinity of collapse, which is in accordance with the liquid character of their monolayers.     

Surface rheology of PEO-PPO-PEO triblock copolymers at the air-water interface: comparison of spread and adsorbed layers

The dilatational rheological properties of monolayers of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)-type block copolymers at the air-water interface have been investigated by employing an oscillating ring trough method. The properties of adsorbed monolayers were compared to spread layers over a range of surface concentrations. The studied polymers were PEO26-PPO39-PEO26 (P85), PEO103-PPO40-PEO103 (F88), and PEO99-PPO65-PEO99 (F127). Thus, two of the polymers have similar PPO block size and two of them have similar PEO block size, which allows us to draw conclusions about the relationship between molecular structure and surface dilatational rheology. The dilatational properties of adsorbed monolayers were investigated as a function of time and bulk solution concentration. The time dependence was found to be rather complex, reflecting structural changes in the layer. When the dilatational modulus measured at different concentrations was replotted as a function of surface pressure, one unique master curve was obtained for each polymer. It was found that the dilatational behavior of spread (Langmuir) and adsorbed (Gibbs) monolayers of the same polymer is close to identical up to surface concentrations of approximately 0.7 mg/m2. At higher coverage, the properties are qualitatively alike with respect to dilatational modulus, although some differences are noticeable. Relaxation processes take place mainly within the interfacial layers by a redistribution of polymer segments. Several conformational transitions were shown to occur as the area per molecule decreased. PEO desorbs significantly from the interface at segmental areas below 20 A(2), while at higher surface coverage, we propose that segments of PPO are forced to leave the interface to form a mixed sublayer in the aqueous region.     

胆红素有序分子膜的行为研究

研究了不同亚相表面胆红素(BR)单分子膜和LB膜的性质,讨论了胆红素分子在有序分子膜中的堆积密度、分子伸展和金属离子配位。在气-水界面,BR与金属离子的配位导致BR单分子截面积、崩溃压和可见紫外光谱的变化。原子力显微镜表明BR-Cu单分子膜的厚渡为1.23 nm。     

Poly(ε-caprolactone)-block-poly(ethyleneoxide) -block-poly(ε-caprolactone): Biodegradable triblock copolymer spread at the air-water interface

Synthesis, characterization and behavior at the air-water interface of A-B-A triblock copolymers are reported. The copolymers consist of a poly(ethylene oxide) central block and poly(ε-caprolactone) lateral blocks. The synthesis was controlled in order to obtain central and lateral blocks of variable length. Copolymer characterization was performed by FTIR and ¹H NMR spectroscopy, size exclusion chromatography (SEC), and thermal analysis. Monolayers of the copolymers at the air-water interface were obtained by the Langmuir technique and the respective isotherms were obtained by monolayer compression. The limiting area per repeat unit (A_o) and the critical exponent of the excluded volume (ν) for spread monolayers were obtained. The static elasticity (ε₀) of the monolayers was also determined. The obtained results allow proposing a schematic model of the orientation of the different blocks during the compression of the respective monolayers.     

Interfacially formed organized planar inorganic, polymeric and composite nanostructures

This paper discusses synthetic strategies for fabrication of new organized planar inorganic, polymeric, composite and bio-inorganic nanostructures by methods based on chemical reactions and physical interactions at the gas-liquid interface, Langmuir monolayer technique, interfacial ligand exchange and substitution reactions, self-assembling and self-organization processes, DNA templating and scaffolding. Stable reproducible planar assemblies of ligand-stabilized molecular nanoclusters containing definite number of atoms have been formed on solid substrate surfaces via preparation and deposition of mixed Langmuir monolayers composed by nanocluster and surfactant molecules. A novel approach to synthesis of inorganic nanoparticles and to formation of self-organized planar inorganic nanostructures has been introduced. In that approach, nanoparticles and nanostructures are fabricated via decomposition of insoluble metal-organic precursor compounds in a layer at the gas-liquid interface. The ultimately thin and anisotropic dynamic monomolecular reaction system was realized in that approach with quasi-two-dimensional growth and organization of nanoparticles and nanostructures in the plain of Langmuir monolayer. Photochemical and redox reactions were used to initiate processes of interfacial nucleation and growth of inorganic phase. It has been demonstrated that morphology of resulting inorganic nanostructures can be controlled efficiently by variations of growth conditions via changes in state and composition of interfacial planar reaction media, and by variations of composition of adjacent bulk phases. Planar arrays and chains of iron oxide and ultrasmall noble metal (Au and Pd) nanoparticles, nanowires and new organized planar disk, ring, net-like, labyrinth and very high-surface area nanostructures were obtained by methods based on that approach. Highly organized monomolecular polymeric films on solid substrates were obtained via deposition of Langmuir monolayer formed by water-insoluble amphiphilic polycation molecules. Corresponding nanoscale-ordered planar polymeric nanocomposite films with incorporated ligand-stabilized molecular metallic nanoclusters and interfacially grown nanoparticles were fabricated successfully. Novel planar DNA complexes with amphiphilic polycation monolayer were formed at the gas-aqueous phase interface and then deposited on solid substrates. Toroidal and new net-like conformations were discovered in those complexes. Nanoscale supramolecular organization of the complexes was dependent on cationic amphiphile monolayer state during the DNA binding. These monolayer and multilayer DNA/amphiphilic polycation complex Langmuir-Blodgett films were used as templates and nanoreactors for generation of inorganic nanostructures via metal cation binding with DNA and following inorganic phase growth reactions. As a result, ultrathin polymeric nanocomposite films with integrated DNA building blocks and organized inorganic semiconductor (CdS) and iron oxide quasi-linear nanostructures were formed. It has been demonstrated that interaction of deposited planar DNA/amphiphilic polycation complexes with bulk phase colloid inorganic cationic ligands (CdSe nano-rods) can result in formation of new highly organized hybrid bio-inorganic nanostructures via interfacial ligand exchange and self-organization processes. The methods developed can be useful for investigation of fundamental mechanisms of nanoscale structural organization and transformation processes in various inorganic and molecular systems including bio-molecular and bio-inorganic nanostructures. Also, those methods are relatively simple, environmentally safe and thus could prove to be efficient practical instruments of molecular nanotechnology with potential of design and cost-effective fabrication of new controlled-morphology organized planar inorganic and composite nanostructured materials. Possible applications of obtained nanostructures and future developments are also discussed.     

Langmuir and langmuir-blodgett films of metallosupramolecular polyelectrolyte-amphiphile complexes

A detailed analysis of a metallosupramolecular polyelectrolyte-amphiphile complex (PAC) at the air-water interface is presented. Langmuir isotherms, Brewster angle microscopy, and X-ray reflectance and diffraction methods are employed to investigate the structure of the Langmuir monolayers. The PAC is self-assembled from 1,3-bis[4'-oxa-(2,2':6',2' '-terpyridinyl)]propane, iron acetate, and dihexadecyl phosphate (DHP). Spreading the PAC at the air-water interface results in a monolayer that consists of two strata. DHP forms a monolayer at the top of the interface, while the metallosupramolecular polyelectrolyte is immersed in the aqueous subphase. Both strata are coupled to each other through electrostatic interactions. The monolayers can be transferred onto solid substrates, resulting in well-ordered multilayers. Such multilayers are model systems for well-ordered metal ions in two dimensions.     

Thermoresponsive reversible behavior of multistimuli pluronic-based pentablock copolymer at the air-water interface

Surface behavior of the pH- and thermoresponsive amphiphilic ABCBA pentablock copolymer has been studied with respect to the environmental conditions. We demonstrate that the pentablock copolymer poly((diethylaminoethyl methacrylate)-b-(ethylene oxide)-b-(propylene oxide)-b-(ethylene oxide)-b-(diethylaminoethyl methacrylate)) possesses reversible temperature changes at the air-water interface in a narrow pH range of the water subphase. Significant diversity in the surface morphology of pentablock copolymer monolayers at different pH and temperatures observed were related to the corresponding reorganization of central and terminal blocks. Remarkable reversible variations of the surface pressure observed for the Langmuir monolayers at pH 7.4 in the course of heating and cooling between 27 and 50 degrees C is associated with conformational transformations of terminal blocks crossing the phase line in the vicinity of the lower critical solution temperature point. The observed thermoresponsive surface behavior can be exploited for modeling of the corresponding behavior of pentablock copolymers adsorbed onto various biointerfaces for intracellular delivery for deeper understanding of stimuli-responsive transformations relevant to controlled drug and biomolecules release and retention.     

Adsorbed and spread beta-casein monolayers at oil-water interfaces

A previous study (Langmuir 2003, 19, 8436) used a Langmuir type pendant drop film balance to form beta-casein monolayers at the air-water interface. The present paper reports the application of that technique to the formation of protein monolayers at liquid interfaces. This technique allows a direct comparison between spread and adsorbed beta-casein interfacial behaviors that is presented in terms of their pi-A isotherms and static elasticity moduli. Pi-A isotherms of adsorbed and spread protein have been compared and found to be fairly similar in shape, stability, and also hysteresis phenomena. Examination of the elasticity moduli of both layers shows a similar analogy although slight differences arise and are interpreted in terms of the protein unfolding extent attained by both procedures at the oil interface.