Spectroscopic analysis and in situ monitoring of impregnation and extraction of polymer films and powders using supercritical fluids

A range of vibrational spectroscopic techniques are used to monitor supercritical fluid extraction and impregnation of polymers. Impregnation processes of this type show potential as alternative apporaches to the synthesis of polymer based catalysts and new materials. Methods have been devised using conventional Fourier transform infrared spectroscopy for real time monitoring of the extraction and impregnation of polyethylene films using an organometallic complex, CpMn(CO)₃ (Cp = η⁵ ? C₅ H₅) as a spectroscopic probe. Both low and high density powdered polyethylene may be impregnated using supercritical carbon dioxide. The resulting materials are analysed using FTIR photoacoustic spectroscopy, diffuse reflectance infrared spectroscopy and FT Raman spectroscopy to probe both the impregnated bulk of the polymer and surface-coated material. © 1994 John Wiley & Sons, Inc.     

Interfacing between supercritical fluid chromatography and infrared spectroscopy — A review

Summary Coupling of supercritical fluid chromatography (SFC) and infrared spectroscopy (IR) is growing in popularity. SFC/IR is one of the important hyphenated techniques in modern analytical chemistry. Basically two types of interfacing approaches have been introduced: direct flow cell and solvent elimination. These techniques are reviewed and their advantages and disadvantages are discussed.     

Analyzing the Vibrational Signatures of Thiophenol Adsorbed on Small Gold Clusters by DFT Calculations

Using density functional theory, we calculate the IR and Raman signatures of the thiophenol (TP) molecule adsorbed on gold clusters by mimicking the different types of adsorption sites, and we analyze these signatures by using advanced tools implemented into the pyvib2 program. First, we follow the evolution of the vibrational normal modes from the isolated TP molecule to those of TP adsorbed on different clusters to highlight the influence of the site of adsorption on the vibrational motions. The use of the overlap matrix between the modes enables mode permutations, mode mixings, and mode splittings to be highlighted, all of which depend not only on the adsorption but also on the type of cluster and its symmetry. Second, the IR and Raman signatures were analyzed by using group coupling matrices and atomic contribution patterns based on the Hug decomposition scheme. Key results include 1) the fact that Raman spectroscopy is more sensitive than IR spectroscopy with respect to the nature of the coordination site, 2) an IR criterion that distinguishes between on‐top coordination (onefold coordinated) with respect to the bridge (twofold coordinated) and hexagonal close‐packed hollow site coordination (threefold coordinated), and 3) the best agreement to the experimental Raman spectrum with regard to signatures in the 500 to 1200 cm^?1 region is obtained for bridged, twofold coordination.     

Infrared and Raman Spectroscopy of Methylcyanodiacetylene (CH3C5N)

A spectroscopic study combining IR absorption and Raman scattering is presented for methylcyanodiacetylene (CH₃C₅N). Gas‐phase, cryogenic matrix‐isolated, and pure solid‐phase substance was analyzed. Out of 16 normal vibrational modes, 14 were directly observed. The analysis of the spectra was assisted by quantum chemical calculations of vibrational frequencies, IR absorption intensities, and Raman scattering activities at density functional theory and ab initio levels. Previous assignments of gas‐phase IR absorption bands were revisited and extended.     

金属有机化学中的绿色化学反应进展

着重综述了金属有机化学领域中所涉及的与绿色化学概念有关的一些化学反应,如水相反应、超临界流体及离子液体中的反应、固态反应、原子经济性及过渡金属催化的有机反应。     

Chromatography with Supercritical Fluids

Chromatography with supercritical fluids unites the features of both gas chromatography and liquid chromatography, yet retains special characteristics of its own. The diffusion coefficient and particularly the viscosity of fluid phases may approach values for low-pressure gases, while the solvent power may be similar to that of liquids. However, with supercritical fluids it is possible to control chromatographic separations very effectively by pressure programming, since the solubility increases with increasing density. Temperature programming, on the other hand, can have the opposite effect to that in gas- or liquid-chromatography since the density decreases with increasing temperature at a given pressure. Supercritical fluid chromatography is primarily of interest for the separation of higher molecular weight compounds. The efficiency of this method of separation is demonstrated on several homologous series. Thus, a styrene oligomer with nominal M_w=2200 can be resolved by a pressure and temperature program into 40 species.     

Molecular Details on Multiple Cofactor Containing Redox Metalloproteins Revealed by Infrared and Resonance Raman Spectroscopies

Vibrational spectroscopy and in particular, resonance Raman (RR) spectroscopy, can provide molecular details on metalloproteins containing multiple cofactors, which are often challenging for other spectroscopies. Due to distinct spectroscopic fingerprints, RR spectroscopy has a unique capacity to monitor simultaneously and independently different metal cofactors that can have particular roles in metalloproteins. These include e.g., (i) different types of hemes, for instance hemes c, a and a₃ in caa₃-type oxygen reductases, (ii) distinct spin populations, such as electron transfer (ET) low-spin (LS) and catalytic high-spin (HS) hemes in nitrite reductases, (iii) different types of Fe-S clusters, such as 3Fe-4S and 4Fe-4S centers in di-cluster ferredoxins, and (iv) bi-metallic center and ET Fe-S clusters in hydrogenases. IR spectroscopy can provide unmatched molecular details on specific enzymes like hydrogenases that possess catalytic centers coordinated by CO and CN⁻ ligands, which exhibit spectrally well separated IR bands. This article reviews the work on metalloproteins for which vibrational spectroscopy has ensured advances in understanding structural and mechanistic properties, including multiple heme-containing proteins, such as nitrite reductases that house a notable total of 28 hemes in a functional unit, respiratory chain complexes, and hydrogenases that carry out the most fundamental functions in cells.     

Solid state characterization of an antioxidant alkaloid boldine using vibrational spectroscopy and quantum chemical calculations

Boldo (Peumus boldus Mol.), a Chilean tree traditionally employed in folk medicine and recognized as a herbal remedy in a number of pharmacopoeias, mainly for the treatment of liver ailment, has recently been the subject of increasing attention. Boldine, in particular, the major and most characteristic alkaloid constituent of this plant species, now emerges as its most interesting active principle from the pharmacological viewpoint.In the present work the structural and spectral characteristics of boldine have been studied by methods of infrared, Raman spectroscopy and quantum chemistry. Electrostatic potential surface, optimized geometry, harmonic vibrational frequencies, infrared intensities and activities of Raman scattering were calculated by ab initio Hartree-Fock (HF) and density functional theory (DFT) employing B3LYP with complete relaxation in the potential energy surface using 6-311G(d,p) basis set. A complete vibrational assignment is provided for the observed Raman and infrared spectra of boldine molecule.     

Theoretical Simulation of Vibrational Sum‐Frequency Generation Spectra from Density Functional Theory: Application to p‐Nitrothiophenol and 2,4‐Dinitroaniline

The molecular orientation of adsorbed molecules forming self‐assembled monolayers can be determined by combining vibrational sum‐frequency generation (SFG) measurements with quantum chemical calculations. Herein, we present a theoretical methodology used to simulate the SFG spectra for different combinations of polarizations. These simulations are based on calculations of the IR vectors and Raman tensors, which are obtained from density functional theory computations. The dependency of the SFG vibrational signature with respect to the molecular orientation is presented for the molecules p‐nitrothiophenol and 2,4‐dinitroaniline. It is found that a suitable choice of basis set as well as of exchange‐correlation (XC) functional is mandatory to correctly simulate the SFG intensities and consequently provide an accurate estimation of the adsorbed molecule orientation. Comparison with experimental data shows that calculations performed at the B3LYP/6‐311++G(d,p) level of approximation provide good agreement with experimental frequencies, and with IR and Raman intensities. In particular, it is demonstrated that polarization and diffuse functions are compulsory for reproducing the IR and Raman spectra, and consequently vibrational SFG spectra, of systems such as p‐nitrothiophenol. Moreover, the investigated XC functionals reveal their influence on the relative intensities, which show rather systematic variations with the amount of Hartree–Fock exchange. Finally, further aspects of the modeling are revealed by considering the frequency dependence of the Raman tensors.     

Towards a detailed understanding of bacterial metabolism--spectroscopic characterization of Staphylococcus epidermidis.

Bacteria are a major cause of infection. To fight disease and growing resistance, research interest is focused on understanding bacterial metabolism. For a detailed evaluation of the involved mechanisms, a precise knowledge of the molecular composition of the bacteria is required. In this article, various vibrational spectroscopic techniques are applied to comprehensively characterize, on a molecular level, bacteria of the strain Staphylococcus epidermidis, an opportunistic pathogen which has evolved to become a major cause of nosocomial infections. IR absorption spectroscopy reflects the overall chemical composition of the cells, with major focus on the protein vibrations. Smaller sample volumes-down to a single cell-are sufficient to probe the overall chemical composition by means of micro-Raman spectroscopy. The nucleic-acid and aromatic amino-acid moieties are almost exclusively explored by UV resonance Raman spectroscopy. In combination with statistical evaluation methods [hierarchical cluster analysis (HCA), principal component analysis (PCA), linear discriminant analysis (LDA)], the protein and nucleic-acid components that change during the different bacterial growth phases can be identified from the in vivo vibrational spectra. Furthermore, tip-enhanced Raman spectroscopy (TERS) provides insight into the surface structures and follows the dynamics of the polysaccharide and peptide components on the bacterial cells with a spatial resolution below the diffraction limit. This might open new ways for the elucidation of host-bacteria and drug-bacteria interactions.     

IR,Raman, and UV/Vis Spectra of Corannulene for Use in Possible Interstellar Identification

The spectroscopic characterization of corannulene (C₂₀H₁₀) is carried out by several techniques. The high purity of the material synthesized for this study was confirmed by gas chromatography‐mass spectrometry (GC‐MS). During a high‐performance liquid chromatography (HPLC) process, the absorption spectrum of corannulene in the ultraviolet (UV) and visible (vis) ranges is obtained. The infrared (IR) absorption spectrum is measured in CsI pellets, and the Raman scattering spectrum is recorded for pure crystal grains. In addition to room temperature measurements, absorption spectroscopy in an argon matrix at 12 K is also performed in the IR and UV/Vis ranges. The experimental spectra are compared with theoretical Raman and IR spectra and with calculated electronic transitions. All calculations are based on the density functional theory (DFT), either normal or time‐dependent (TDDFT). Our results are discussed in view of their possible application in the search for corannulene in the interstellar medium.     

超临界流体色谱在金属络合物和金属有机化合物中的分析应用

超临界流体色谱（SFC）在色谱分离过程中能在较低的温度下分析对热不稳定性的化合物,包括金属络合物和金属有机化合物。本文总结了近来文献报道的各种过渡金属、重金属、镧系和锕系以及铅、汞和锡的金属有机化合物的SFC分离,还讨论了SFC检测系统和金属有机化合物的溶解度的测定。     

Solid-liquid-liquid extraction as an approach to the sensitive detection of a hydrophobic pollutant through surface-enhanced Raman spectroscopy

Surface-enhanced Raman scattering (SERS) spectra of thiram (tetramethylthiuram disulfide), a dimethyl dithiocarbamate fungicide, were recorded after the adsorption on plasmonic silver nanowires from a system of water, organic solvent and nanoparticles. As organic solvents dichloromethane and 1-octanol were involved. A method for measuring the adsorption constant of thiram as a model molecule to the silver surface by studying its partition phenomena in a binary solvent system is presented. The method is based on the extraction of a hydrophobic molecule from an organic solvent by an aqueous suspension of silver anisotropic nanoparticles. The obtained results demonstrate the effectiveness of SERS methodology for the sensitive analysis of compounds with low aqueous solubility, and a reliable SERS spectrum of thiram was obtained with excellent signal/noise ratio at low concentrations. In addition, for vibrational assignments, Density Functional Theory (DFT) was used for the simulation of the Raman and SERS spectra of thiram and its complexes with silver considering the following two models: a single silver atom and an Ag₂₀ cluster.     

Quantitative Analysis of Alpha‐D‐glucose in an Ionic Liquid by Using Infrared Spectroscopy

The applicability of infrared (IR) spectroscopy for quantitative concentration measurements in mixtures of carbohydrates and ionic liquids (ILs) is investigated. The compound 1‐ethyl‐3‐methylimidazolium acetate, [EMIM][OAc]—an “enzyme‐friendly” ionic liquid with great application potential in the dissolution of various biomasses—is used as solvent in combination with alpha‐D ‐glucose. Our study establishes a new way to monitor the concentration of sugars in ILs, thus providing a convenient method to follow the kinetics of, for example, enzymatic reactions in [EMIM][OAc]. As a first step, we present the IR spectrum of pure [EMIM][OAc] (this constitutes the first vibrational study of this particular IL). Although numerous lines overlap in the fingerprint region of the spectrum, characteristic features can be assigned to the corresponding vibrational modes of both ions. Secondly, we study different mixtures of the IL with alpha‐D ‐glucose (in the concentration range: 0–20 mass % glucose) and analyze them by means of IR spectroscopy, followed by computational methods, thus demonstrating the great potential of this spectroscopic technique in quantitative measurements.     

超临界流体化学热力学

本文简要介绍了超临界流体的基本概念和性质，评述了化学热力学在超临界萃取、超临界态化学反应、超临界流体制备材料等方面的作用和研究进展，讨论了二氧化碳-离子液体两相体系的热力学行为。     

The use of alternative fluids in on-line supercritical fluid extraction – capillary gas chromatography

A key feature differentiating analytical supercritical fluid extraction (SFE) from conventional liquid extraction is the possibility of varying the solvent strength of a supercritical fluid to achieve selective extractions of specific target compounds, or functional classes of compound, from complex matrices. This can be accomplished by using supercritical fluids other than carbon dioxide, for example, sulfur hexafluoride, nitrous oxide, or sulfur hexafluoride-modified carbon dioxide. The use of these fluids will be demonstrated by the characterization of complex environmental and petroleum matrices by directly coupled SFE – capillary GC. On-line SFE-GC involves the decompression of pressurized extraction fluid directly into the heated, unmodified capillary split injection port of the chromatograph. This paper will also show how, by adjustment of the extraction temperature and pressure, SFE selectivity may be further enhanced.     

Vibrational spectroscopic identification of isoprene,pinenes and their mixture

Here we show a study of vibrational spectroscopic identification of a few typical organic compounds which are known as the main sources of organic aerosols(OAs) particle matter in air pollution. Raman and IR spectra of isoprene, terpenoids, pinenes and their mixture are meticulously examined, showing distinguishable intrinsic vibrational spectroscopic fingerprints for these chemicals, respectively. As a reference, first-principles calculations of Raman and infrared activities are also conducted. It is interestingly found that, the experimental spectra are peak-to-peak consistent with the DFT(Density Functional Theory)-calculated vibrational activities. Also found is that, in a certain case such as for bpinene, a dimer model, rather than an isolated single molecular model, reproduces the experimental results, indicating unneglected intermolecular interactions. Starting with this study, we are endeavoring to advocate a database of Raman/IR fingerprint spectra for OA haze identification.     

Introduction to Infrared and Raman-Based Biomedical Molecular Imaging and Comparison with Other Modalities

Molecular imaging has rapidly developed to answer the need of image contrast in medical diagnostic imaging to go beyond morphological information to include functional differences in imaged tissues at the cellular and molecular levels. Vibrational (infrared (IR) and Raman) imaging has rapidly emerged among the molecular imaging modalities available, due to its label-free combination of high spatial resolution with chemical specificity. This article presents the physical basis of vibrational spectroscopy and imaging, followed by illustration of their preclinical in vitro applications in body fluids and cells, ex vivo tissues and in vivo small animals and ending with a brief discussion of their clinical translation. After comparing the advantages and disadvantages of IR/Raman imaging with the other main modalities, such as magnetic resonance imaging (MRI), computed tomography (CT), positron emission tomography/single-photon emission-computed tomography (PET/SPECT), ultrasound (US) and photoacoustic imaging (PAI), the design of multimodal probes combining vibrational imaging with other modalities is discussed, illustrated by some preclinical proof-of-concept examples.     

Characterization of Phenolics in Lavandula angustifolia

ABSTRACT

The lavender flowers and their essential oil are widely used in therapy in Romania and the European Community. Since the European Pharmacopoeia only allows the use of Lavandula sp flowers for medicinal purposes, the objective of this study was to investigate the chemical composition of Lavandula angustifolia extracts obtained by ultrasound-assisted extraction, rapid pressurized extraction at 6.7?bar, and subcritical fluid extraction. The solvents used for the first two methods were mixtures of water and alcohol, glycerin, and propylene glycol. These extracts were analyzed by high-performance thin-layer chromatography, infrared spectroscopy with attenuated total reflectance, and Raman spectroscopy. The total phenolics were evaluated using a modified Folin–Ciocalteu method. The primary phenolics were chlorogenic acid, gallic acid, umbelliferone, luteolin 7-O-glucoside, vitexin, and isoquercitroside. The extracts were variable in composition, with the highest yield by subcritical fluid extraction, followed by extraction at 6.7?bar. The infrared and Raman spectroscopy results confirmed the chromatography measurements.     

Structure formation under negative pressures

IR and Raman spectroscopy are used to study cubic and orthorhombic modifications of Sb₂O₃. Vibrational spectra are calculated in the approximation of density functional theory; the bands are assigned. Based on the assignment made, vibrational spectra of the α-Sb₃O₂F₅ compound are analyzed.