Solid-phase spectrophotometric determination of trace amounts of vanadium at sub-ng/ml level with 4-(2-pyridylazo)resorcinol

Solid-phase spectrophotometry has been applied to analysis for trace amounts of vanadium. Vanadium was sorbed in a styrene-divinylbenzene-type anion-exchanger Dowex 1-X8 as a vanadium-4-(2-pyridylazo)resorcinol complex. Resin phase absorbances at 562 and 800 nm were measured directly which allowed the determination of vanadium in the range of 0.1-2.4 ng/ml with a RSD of 1.5%. The method has been applied to the determination of vanadium in different samples, namely toadstool tissue, mussel tissue, petroleum crudes and swamp water.     

Analysis of Metal Ions in Environmental Samples - III Synergistic Determination of Vanadium (V) As its Mixed Complex with N-0-Methoxyphenyl-2-Thenohydroxamic Acid and 3-(0-Carboxyphenyl)-1-Phenyltriazine-N-0Xide

Abstract

A highly sensitive, selective, and rapid method for the spectrophotometry determination of vanadium(V) at trace levels is described. The method is based on the selective extraction of vanadium(v) from strongly acidic (3–6 M hydrochloric acid) met ium with solution of N-0-methoxyphenyl-2- thenohydroxamic acid (0MTHA) in chloroform. The extract is then equilibrated with 3-(0-carboxyohenyl)-1-phenyltriazine-N-oxide(CPPTNO) at pH ? 1.5 and the resulting colour is measured at 445 nm. The colour system obeys Beer's law over the range 0–20 -μg/ml of vanadium; the molar absorptivityat the wavelength of maximum absorption (445 nm), and the Sandell sensitivity of the method are 1.1 × 10⁴1. mole^?1 cm^?1 and 0.005 μg/ml respectively.     

Kinetic-spectrophotometric determination of trace amounts of vanadium

A simple and sensitive kinetic-spectrophotometric method is described for the determination of vanadium and the possible mechanism of catalytic reaction is proposed. The method is based on the vanadium(V)-catalyzed oxidation of 1,8-diaminonaphthalene (DNA) by potassium bromate (Tiron as activator) at pH 3.8 and 40 degrees C. The reaction was monitored spectrophotometrically by measuring the increase in absorbance of oxidation products at 505 nm after a fixed time (6 min). The proposed method allowed the determination of vanadium in the range 0.025-15 ng ml(-1) with good precision and accuracy and the detection limit was down to 0.01 ng ml(-1). The method was found to be relatively selective and was applied successfully to the determination of vanadium in food and hair samples without previous separations. Recovery experiments have also been performed; excellent results were obtained.     

Spectrofluorimetric method for determination of aluminium with chromotropic acid and its application to water samples

A rapid and sensitive method for the trace level determination of aluminium based on the formation of a 1:1 complex with chromotropic acid (1,8-dihydroxynaphthlene-3,6-disulfonic acid) in an methanol medium is reported. The fluorescence intensity of the system was 50 times greater than that of the system without aluminium. This method is very sensitive and selective for the direct determination of aluminium ion. The fluorescence is excited at 346 nm and measured at 370 nm. The optimum conditions are a chromotropic acid concentration of 5.0 ml (1.0x10(-4) M) and pH 4.0+/-0.5 (acetic acid-sodium acetate buffer). The fluorescence intensity is a linear function of the concentration of Al(III) in the range 2-100 ng ml(-1) and the detection limit is 1.0 ng ml(-1). The method has been applied successfully to the determination of trace amount of Al(III) in tap, river and sea-water samples.     

The Determination of Trace Amounts of Phosphate in Natural Water by Flow Injection Fluorimetry

Abstract

A new method is suggested for the determination of trace amounts of phosphate by flow injection fluorimetry, based on the principle that molybdophosphate could quench the fluorescence of Rhodamine 6G. The fluorescence is excited at 350 nm and measured at 550 nm. The calibration graph is linear up to 100 ng/ml phosphorus concentration and the detection Unit is 1.9 ng/ml. The present method has been applied to the determination of soluble phosphorus in natural water samples, the recoveries were in the range of 92 – 102 %. The sampling rate is 120 samples per hour.     

钒(Ⅴ)-桑色素-溴化十六烷基三甲铵胶束增敏荧光光度法的研究和应用

研究了在 p H 2 .5的 HCl- Na Ac介质中 ,溴化十六烷基三甲铵( CTMAB)对桑色素 ( morin)和钒 ( )配合物荧光的增敏作用 ,建立了利用钒 ( ) - morin- CTMAB胶束增敏荧光反应测定痕量钒的荧光光度新方法。方法的检出限为 0 .92μg/L ,荧光强度与钒的含量在 0 .0 1 0～ 6.0μg/1 0 m L范围内呈线性关系 ,配合物中钒 ( )与桑色素的组成比为 :V( )∶ morin=1∶ 1。方法可应用于天然水和食品中微量钒的测定     

溴酸钾-二甲酚橙体系-顺序注射-催化光度法测定痕量钒

在酸性介质条件下,钒(Ⅳ)能显著催化溴酸钾对二甲酚橙的氧化褪色反应。据此建立了测定痕量钒(Ⅳ)的顺序注射催化光度法。方法的线性范围为0.5~50ng/mL、检出限为0.4ng/mL。对10ng/mL的钒(Ⅳ)连续11次测定的相对标准偏差为1.1%。用于环境水样中痕量钒(Ⅳ)的测定,加标回收率为91%~108%。     

溴酸钾二甲酚橙体系-顺序注射-催化光度法测定痕量钒

在酸性介质条件下,钒(Ⅳ)能显著催化溴酸钾对二甲酚橙的氧化褪色反应。据此建立了测定痕量钒(Ⅳ)的顺序注射催化光度法。方法的线性范围为0.5⁵0ng/mL、检出限为0.4ng/mL。对10ng/mL的钒(Ⅳ)连续11次测定的相对标准偏差为1.1%。用于环境水样中痕量钒(Ⅳ)的测定,加标回收率为91%50ng/mL、检出限为0.4ng/mL。对10ng/mL的钒(Ⅳ)连续11次测定的相对标准偏差为1.1%。用于环境水样中痕量钒(Ⅳ)的测定,加标回收率为91%¹08%。     

Trace Analysis of Vanadium in Environment as its Ternary Complex with N-p Methoxyphenyl-2-Furylacrylohydroxamic Acid and 3-(o-Carboxyphenyl)-1-Phenyltriazine-N-Oxide

Abstract

A method is presented for the highly sensitive, selective, and rapid determination of vanadium (V) at sub-microgram levels in rocks, animal tissues, plant tissues and natural waters. The method is based on the selective extraction of vanadium (V) from strongly acidic (3-8 M hydrochloric acid) medium with solution of N-p-methoxyphenyl-2-furylacrylohydroxamic acid (MFHA) in chloroform. The reddish-violet extract (molar absorbance 8.6x10³ 1 mole^?1 cm^?1 at λ max 545 nm) is then equilibrated with 3-(o-carboxyphenyl)-1-phenyltriazine-N-oxide (CPPTNO) at pH = 1.5. The resulting ternary complex has enhanced colour (molar absorbance 1.4 × 10⁴ 1 mole^?1 cm^?1 at Λ max 450 nm). The ternary system obeys Beer's Law at 450 nm over the range 0-18 μ g/ml of vanadium. The extraction system achieves 20-fold enrichment of vanadium and enables the determination of the metal down to parts per billion (ng 1^?1) levels. The method tolerates the presence of a large number of anions and cations which are normally present with vanadium in rocks, plant tissues, animal tissues and natural waters. The applicability of the method was tested by the analysis of vanadium in these matrices. MFHA was selected from nine hydroxamic acids as it provided maximum sensitivity and selectivity.     

Catalytic flow injection determination of vanadium by oxidation of N-(3-sulfopropyl)-3,3',5,5'-tetramethylbenzidine using bromate

A catalytic flow-injection (FI) method was developed for the determination of 10⁻⁹ mol l⁻¹ levels of vanadium(IV, V). The method is based on the catalytic effect of vanadium(V) on oxidation of N-(3-sulfopropyl)-3,3′,5,5′-tetramethylbenzidine (TMBZ·PS) using bromate as oxidant to form a yellow dye (λ_max=460 nm). The use of 5-sulfosalicylic acid (SSA) as an activator enhanced the sensitivity of the method. The calibration graphs with a working range 0.05–8.0 ng ml⁻¹ were obtained for vanadium(V). Vanadium(IV) was also determined, being oxidized by bromate. The detection limit (signal/noise, S/N=3) was 0.01 ng ml⁻¹ (ca. 2×10⁻¹⁰ mol l⁻¹) vanadium. The relative standard deviations (R.S.D.) for 15 determinations of 0.5 ng ml⁻¹ vanadium, and for ten determinations of 0.1 and 1.0 ng ml⁻¹ vanadium were 0.41, 2.6 and 0.25%, respectively, with a sampling rate of 15 samples h⁻¹. The proposed method was successfully applied to the determination of vanadium in natural waters.     

Solid-phase spectrophotometric determination of trace amounts of vanadium using 2,3-dichloro-6(3-carboxy-2- hydroxynaphthylazo)quinoxaline

Solid-phase spectrophotometry (SPS) has been applied to analysis for trace amounts of vanadium in several environmental water (potable and polluted), biological samples (human blood and urine), and soil samples. Vanadium was sorbed in a styrene-divinylbenzene-type anion-exchanger Dowex 1-X8 as a vanadium--2,3-dichloro-6(3-carboxy-2-hydroxynaphthylazo)quinoxaline. Resin phase absorbances at 606 and 800 nm were measured directly which allowed the determination of vanadium in the range 0.03-2.2 ng ml(-1) with a relative standard deviation (R.S.D.) of 1.4%. The comparison of the SPS method and the gallic acid persulphate method shows that the linearity, analytical sensitivity, and precision were better for the SPS method, and that the latter method has lower detection and quantification limits compared with the gallic acid persulphate method.     

Determination of 1-naphthylacetic acid in commercial formulations and natural waters by solid-phase spectrofluorimetry

A method for the determination of trace amounts of 1-naphthylacetic acid (NAA) has been developed, based on solid-phase spectrofluorimetry. The relative fluorescence intensity of NAA fixed on Sephadex QAE A-25 gel was measured directly after packing the gel beads in a 1-mm silica cell, using a solid-phase attachment. The wavelengths of excitation and emission were 280 and 336 nm, respectively. The applicable concentration range was from 0.3 to 18 ng/ ml, with a relative standard deviation of 1.4% (for a level of 9 ng/ml) and a detection limit of 0.09 ng/ml. The method was applied to the determination of NAA in commercial formulations and natural waters. The method is more sensitive and selective than other methods described in the literature.     

V(Ⅴ)-I~--十六烷基三甲基溴化铵体系共振散射光谱及分析应用

研究了在盐酸介质中,V(Ⅴ)-I--十六烷基三甲基溴化铵(CTMAB)离子缔合物的共振散射光谱。实验发现,当有V(Ⅴ)存在时,V(Ⅴ)与过量的I-反应生成I3-,I3-与CTMAB形成离子缔合物微粒(CTMAB+.I3-)n,使I--CTMAB溶液的共振光散射强度显著增加。在波长563nm处,共振散射光强度最大且光散射强度与钒浓度在2～60ng/mL范围内呈正比,据此建立了测定环境样品中痕量钒的共振散射光谱分析新方法,方法检出限为0.66ng/mL。用拟定的方法测定环境样品中微量钒,相对标准偏差小于7.5%,回收率在97.8%～102.4%。     

Sensitive spectrophotometric determination of vanadium with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol after extraction with N-benzoyl-N-phenylhydroxylamine

A selective and precise spectrophotometric determination of vanadium(V) is performed after preceding extraction with N-benzoyl-N-phenylhydroxylamine (BPHA). The color is developed in a water-ethanol solution with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol (5-Cl-DMPAP). The molar absorptivity at 588 nm is (6.57 ± 0.05) × 10⁴ L mol^–1 cm^–1 at pH 2.1. The method permits the determination of vanadium (V) at trace levels in the presence of large amounts of other ions. It is applied to the determination of vanadium in aluminium (analytical reagent grade) and in human hair. High accuracy and precision is obtained. Received: 18 April 1997 / Revised: 20 June 1997 / Accepted: 25 June 1997     

Determination of warfarin at trace-levels in water by solid-phase spectrofluorimetry

A new selective and sensitive spectrofluorimetric method for the determination of warfarin at trace levels (0.2–50.0 ng/ml) in water is proposed. Warfarin is fixed on Sephadex QAE A-25 gel (at pH = 7.0) and its fluorescence is measured directly in the solid-phase using a 1-mm silica cell at 312/385 nm with a detection/quantification limit of 0.06/0.2 ng/ml, a relative standard deviation of 2.3% and recoveries between 95 and 105%. The method is applied to the determination of warfarin residues in water.     

Determination of warfarin at trace-levels in water by solid-phase spectrofluorimetry

A new selective and sensitive spectrofluorimetric method for the determination of warfarin at trace levels (0.2-50.0 ng/ml) in water is proposed. Warfarin is fixed on Sephadex QAE A-25 gel (at pH = 7.0) and its fluorescence is measured directly in the solid-phase using a 1-mm silica cell at 312/385 nm with a detection/quantification limit of 0.06/0.2 ng/ml, a relative standard deviation of 2.3% and recoveries between 95 and 105%. The method is applied to the determination of warfarin residues in water.     

Sensitive spectrophotometric determination of vanadium with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol after extraction with N-benzoyl-N-phenylhydroxylamine

A selective and precise spectrophotometric determination of vanadium(V) is performed after preceding extraction with N-benzoyl-N-phenylhydroxylamine (BPHA). The color is developed in a water-ethanol solution with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol (5-Cl-DMPAP). The molar absorptivity at 588 nm is (6.57 ± 0.05) × 10⁴ L mol^–1 cm^–1 at pH 2.1. The method permits the determination of vanadium (V) at trace levels in the presence of large amounts of other ions. It is applied to the determination of vanadium in aluminium (analytical reagent grade) and in human hair. High accuracy and precision is obtained.     

Kinetic-spectrophotometric determination of traces of vanadium(V) by its catalytic effect on the oxidation of 1,4-dihydroxyphthalimide dioxime with bromate

A kinetic-spectrophotometric method for the determination of trace amounts of vanadium(V) is described. It is based on the catalytic action of this ion on the oxidation of 1,4-dihydroxyphthalimide dioxime by bromate, which yields a red-violet product in acidic medium. The reaction is followed spectrophotometrically by measuring the rate of change in absorbance at 500 nm and 30°C. Using several kinetic methods (tangent, fixed-time and fixed-absorbance), vanadium(V) in the range 10–400 ng ml^?1 can be determined. The proposed methods are hardly subject to interferences. The tangent method was used for the determination of vanadium in atmospheric particulate matter, human serum and synthetic mixtures. The kinetic parameters of the catalysed and uncatalysed reactions are reported.     

Liquid chromatographic determination of vanadium in petroleum oils and mineral ore samples using 2-acetylpyridne-4-phenyl-3-thiosemicarbazone as derivatizing reagent

Liquid chromatographic method has been developed, based on precolumn derivatization of vanadium(V) with 2-acetylpyridine-4-phenyl-3-thiosemicarbazone (APPT). The complex is extracted in chloroform together with palladium(II), tin(II) and iron(III) and eluted and separated completely from Kromasil 100 C-18, 10 μm (25 cm × 4.6 mm i.d.) column with methanol:water:acetonitrile (60:30:10, v/v/v) with a flow rate of 1 ml/min. UV detection was at 260 nm. Linear calibration curve was obtained with 1-12.5 μg/ml vanadium(V) with detection limit of 8 ng/injection (20 μl). A number of metal ions tested did not affect the determination of vanadium. The test mixtures were analyzed for vanadium(IV) and vanadium(V) contents and relative% error was obtained ±1-8%. The method was applied for the determination of vanadium in petroleum oils and mineral ore samples with vanadium contents of 0.32-2.3 and 121.7-717.3 μg/g with R.S.D. of 1.5-4.5 and 0.38-4.7%, respectively. The results correlated with reported values and by atomic absorption spectrophotometry.     

Ion-exchange separation and spectrophotometric determination of vanadium in environmental samples

A selective and sensitive method for the extraction and spectrophotometric determination of vanadium(V) in microgram quantities is described. The molar absorptivity of the yellow vanadium(V)-caffeic acid-Aliquat 336 extract is 1.3 x 10(4) 1.mole(-1).cm(-1) at 370nm. The method is compared with the atomic-absorption spectrometric method and applied to the trace determination of vanadium in steel, alloys, a rock and environmental samples.