基于配合物配体策略的Cu-Cd异核配位聚合物的合成与晶体结构

利用小分子配合物[Cu(2-mpac)₂(H₂O)]•3H₂O (1)作为配合物配体, 以其两侧未配位的羰基氧原子与金属配位合成了一个Cu-Cd异核配位聚合物[Cu(2-mpac)₂(H₂O)₂Cd(H₂O)₄(NO₃)₂]_n (2) (2-mpac＝5-methyl-2-pyrazinecarboxylic acid), 并利用元素分析、红外光谱以及X射线单晶衍射法对标题化合物进行了表征. 晶体学数据: 三斜晶系, P-1空间群, a＝0.7654(7) nm, b＝0.8903(8) nm, c＝0.9745(9) nm, α＝116.116(1)°, β＝98.408(1)°, γ＝90.335(1)°, V＝0.5880(9) nm³, Z＝1, S＝1.053, 最终残差因子[I＞2σ(I)] R₁＝0.0280, wR₂＝0.0718, 对于全部数据R₁＝0.0305, wR₂＝0.0741.     

两个基于八钼酸盐的无机-有机杂化材料的合成、结构和光催化性能

通过水热法成功合成了两个新的基于(β-Mo₈O₂₆)^4-构型的无机-有机杂化材料,分子式分别为{[Ni(β-Mo₈O₂₆)(H₂O)₄](H₂Fbix) 2H₂O}_n(1)和{[Co(β-Mo₈O₂₆)(H₂O)₄](H₂Fbix) 2H₂O}_n(2)(Fbix=2,3,5,6-四氟-二(1,4-咪唑-1-甲基)苯)。利用X-射线单晶衍射、X-射线粉末衍射、红外光谱、热重分析和元素分析等对该化合物的结构和性能进行了表征。晶体结构分析表明：化合物1和2为同构化合物。在化合物1中,扭曲八面体构型的Ni^II与两个β-[Mo₈O₂₆]^4-单...     

系列Sm3+配合物的合成、结构及光物理性能

采用水热方法合成了4种Sm³⁺配合物, 即{[SmZn(2,5-pdc)₂(tp)_0.5(H₂O)]·2H₂O}_n(1), [Sm₂Zn₂(C₆H₅COO)₁₀(Imh)₂(H₂O)₂](2), {[Sm₂(NO₂C₆H₄COO)₆(H₂O)₄]·H₂O}_n(3)和{[SmN(CH₂COO)₃(H₂O)₂]·H₂O}_n(4)[2,5-pdc=2,5-吡啶二羧酸根, tp=对苯二甲酸根, C₆H₅COO=苯甲酸根, Imh=咪唑, NO₂C₆H₄COO=对硝基苯甲酸根, N(CH₂COO)₃=氨三乙酸根]. 通过单晶X射线衍射确定了其晶体结构. 在室温下测定了其红外光谱、 紫外-可见-近红外光谱以及在近红外区和可见区的发射光谱. 结果表明, 4种配合物在近红外区或可见区均出现Sm³⁺离子的特征发射. 这是形成配合物后, Zn-配体部分和配体对Sm³⁺离子发光的敏化作用所致. 此外, 讨论了不同有机配体或d过渡金属离子对Sm³⁺离子发光的影响, 并分析了配合物中Sm³⁺离子的近红外发射带位移、 劈裂和加宽的原因.     

基于Keggin型杂多酸的无机-有机杂化物的合成和光催化活性

采用水热合成方法制备了2个基于Keggin型杂多酸的无机-有机杂化物, 化学式分别为{[Cu₂(4,4′- bipy)₄(H₂O)₄](SiMo₁₂O₄₀)·18H₂O}_n(1)和{[Cu₂(4,4′-bipy)₄(H₂O)₄](PMo₆W₆O₄₀)·18H₂O}_n(2)(bipy=bipyridine). 结构分析 表明2个化合物同构, Cu²⁺是六配位, 分别与4个4,4′-bipy上的N原子和2个水分子上的O原子结合, 形成 [Cu(4,4′-bipy)₂(H₂O)₂]_n²ⁿ⁺二维层状结构. 杂多阴离子通过静电与配位阳离子[Cu(4,4′-bipy)₂(H₂O)₂]_n²ⁿ⁺作用交叉排列在层间. 通过红外光谱、 粉末X射线衍射和固体紫外-可见漫反射光谱等对化合物的性质进行了表征. 研究了所合成化合物对水溶性染料亚甲基蓝的降解活性, 发现2种化合物对于亚甲基蓝均表现出显著的光降解活性, 并对它们的催化机理进行了讨论.     

以5-(6-羧酸-2-萘基)-间苯二羧酸为配体构筑的两个镉的金属-有机骨架化合物的合成、晶体结构及荧光性质

在溶剂热条件下,以不对称三羧酸5-（6-羧酸-2-萘基）-间苯二羧酸（H3L）为配体合成了2个镉的金属-有机骨架化合物:{[Cd₃L₂（H₂O）₃]·6DMF}_n（1）和{[Cd₃L₂（H₂O）₄]·3DMA}_n（2）。通过X射线单晶衍射,粉末衍射,热重和红外光谱进行了结构表征。结构分析表明,1和2形成3,6-连接的三维结构,其拓扑符号分别为:（4⁵.6⁴.8⁶）（4³）₂和(6¹².8³)（6³）₂。此外,还对2个化合物进行了荧光分析。     

基于三联吡啶-4-羧酸的系列配合物的结构多样性和发光性质（英文）

在溶剂热条件下制备了系列新配合物：[Cr₂(tpc)₂(HCOO)₂(OH)₂]·4H₂O (1)、[Ba(tpc)₂(H₂O)₂]_n (2)、[Zn₂(tpc)₂(NO₃)₂]_n (3)、[Pb(Htpc)(NO₃)₂]·2H₂O (4)和[Rh(Htpc)Cl₃]·CH₃OH·H₂O (5)(Htpc=2,2′∶6,2″-三联吡啶-4-羧酸)。X射线单晶衍射分析表明,有机配体呈4种不同的配位方式;配合物1～5通过C—H…O/N氢键和π…π相互作用形成了新颖的超分子网络。研究了这些配合物的发光性能。在365 nm紫外辐射下,晶体2～5分别呈现绿色、蓝色...     

3,5-吡啶二羧酸镍配位聚合物的合成与晶体结构

采用水热法合成了3个新的3,5-吡啶二羧酸镍配位聚合物[Ni(3,5-Pydc)(H₂O)₄·H₂O]_n(1), [Ni₂(3,5-Pydc)₂(H₂O)₈·(H₂O)₂]_n(2)和[Ni(3,5-Pydc)(H₂O)₂]_n(3), 并通过X射线单晶衍射、FTIR及热重分析对其结构和组成进行了表征. 单晶衍射结果表明, 化合物1和2是一维折线型链状结构, 而化合物3是二维层状结构. 化合物1是由3,5-Pydc配体将中心镍离子连接起来形成的折线型一维链. 在化合物2中存在着两条各自独立的折线型一维链, 但它们的配位方式却完全相同, 每一条链都是由3,5-Pydc配体将镍离子连接而成. 而化合物3则是由3个镍离子和3个3,5-Pydc配体形成的二十元环构成的二维网格. 3个化合物分别通过链间或层间氢键作用(O-H…O)形成三维超分子结构, 化合物1和2中的客体水分子被氢键限域在超分子结构之中.     

新型含氮配体钴配合物的水热合成、晶体结构及荧光性质

以4,5-二羟基苯-1,3-二磺酸钠（Na₂H₂L）和4,4′-bipy为原料,采用水热法与Co(NO₃)₂反应合成了新的含氮配体钴配合物[Co(4,4′-bipy)(H₂O)₄]·H₂L·2H₂O（1）（H₂L^2-=4,5-二羟基苯-1,3-二磺酸根离子,4,4′-bipy=4,4′-联吡啶）,其结构和组成经X-射线单晶衍射、红外光谱、元素分析和热重分析表征。晶体结构解析表明：钴离子与4,4′-bipy和水分子配位,形成扭曲的八面体配位构型。H₂L^2-配体没有配位,仅起平衡电荷作用。在结构单元中,[Co(4,4′-bipy)(H₂O)₄]²⁺, H₂L^2-和自由水分子之间通过氢键相连。配合物的荧光发射峰与配体相比发生了蓝移,最大发射峰位于357 nm。     

4,5-二氮芴-9-酮Cu(Ⅱ),Zn(Ⅱ)配合物的合成、晶体结构、热分析及理论计算

合成了4,5-二氮芴-9-酮(dafo)的Cu(Ⅱ), Zn(Ⅱ)配合物[Cu(dafo)₂(H₂O)₂] (NO₃)₂和[Zn(dafo)₂ (H₂O)₂] (NO₃)₂,通过单晶X射线衍射法确定了它们的结构.晶体结构分析表明,配合物分子中Cu(Ⅱ), Zn(Ⅱ)分别和来自两配体的四个氮原子及两个水分子中的氧原子配位,处于六配位的配位环境中,两配体基本处于同一平面,两水分子垂直于两配体所在平面,Cu(Ⅱ)处于畸变八面体中心,Zn(Ⅱ) 处于正常八面体中心,对两种配合物进行了元素分析、红外和热分析表征,在实验的基础上,采用Gaussian-98w中的DFT-B3LYP/LANL2DZ对两种配合物进行了全几何优化以及后续计算.     

三维化合物[Ni2(BDC)2(m-bix)(H2O)3·3H2O]n的合成、结构和性质

水热条件下,合成了一个三维配位聚合物[Ni₂(BDC)₂(m-bix)(H₂O)₃·3H₂O]_n(1)[BDC=对苯二甲酸,m-bix=1,3-双(咪唑基-1-甲基)-苯],并通过红外,热重和X-射线单晶衍射进行了表征。X射线衍射结果表明化合物含有类似配位环境的金属2个Ni²⁺离子,2个BDC^2-配体,1个m-bix分子,3个配位水分子和3个游离的溶剂水分子。两个Ni²⁺离子分别采用八面体构型,通过桥联水分子形成双核单元,然后通过全部脱质子的BDC形成三维孔洞结构,m-bix配体通过连接两类双核金属原子形成三维框架,游离水分子存在于框架之中。有趣的是,化合物的结构是单一六节点,具有自穿插特征。而且对化合物的红外和热重性质进行了表征。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.