Review on Undoped/Doped TiO2 Nanomaterial; Synthesis and Photocatalytic and Antimicrobial Activity

This review covers the various synthetic methods of doped and undoped TiO₂ nanomaterials, ranging from single‐doped and co‐doped to multidoped with transition‐metal ions, rare earth metal ions, and other metals and nonmetals ions. The effects of doping on the physiochemical propertiesas well as the photocatalytic and antimicrobial activities of TiO₂ nanomaterial are discussed. The results from the literature show that doping of TiO₂ shifts the absorption edge to the visible region as a result of the decrease in the bandgap due to the formation of new energy levels in the bandgap. The dopent also acts as a trapping center for electrons and holes, thereby reducing the recombination rate of charge carriers and increasing the photocatalytic and antimicrobial activity of TiO₂ nanomaterials. All multidoped TiO₂ nanomaterials show higher activity than their undoped, single‐doped, and co‐doped counterparts.     

Effective Charge Carrier Utilization of BiVO4 for Solar Overall Water Splitting

Solar energy-driven overall water splitting (OWS) is an attractive way for generating clean and renewable green hydrogen. One key challenge is the construction of OWS systems with high solar energy conversion efficiencies, in which how to manipulate photoexcited charge carriers to efficiently participate in the reaction is the top priority. In recent years, bismuth vanadate (BiVO₄) has emerged as one of the most promising materials for photo(electro)catalytic OWS and considerable progress has been achieved. In this review, recent advances of BiVO₄-constituted OWS systems in both photoelectrocatalytic and photocatalytic approaches are presented in a mainline of effective charge carrier utilization. Various strategies for improved charge carrier utilization, including band structure engineering, improving charge separation, reducing charge recombination, and accelerating reaction kinetics, are summarized and analyzed in detail. Finally, perspective and outlook on further exploring the application potential of BiVO₄ are proposed.     

Impact of surface hydroxylation in MgO-/SnO-nanocluster modified TiO2 anatase (101) composites on visible light absorption,charge separation and reducibility

Anatase TiO₂ surfaces, whether oxidised or hydroxylated, can be modified by nanoclusters of SnO and MgO to give a red shift in light absorption, enhanced charge separation and high reducibility.     

Improved solar-driven photocatalytic performance of BiOI decorated TiO2 benefiting from the separation properties of photo-induced charge carriers

In this work, BiOI decorated TiO₂ photocatalysts were prepared in-situ by a facile hydrothermal method and characterized by X-ray diffraction (XRD), UV/Vis diffuse reflectance spectroscopy, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS) and surface photovoltage (SPV) spectroscopy. The reactive radicals during the photocatalytic reaction were detected by scavenger experiments. BiOI/TiO₂ composites exhibit higher performance than the pure TiO₂ towards photocatalytic decolorization of methyl orange (MO) aqueous solution, when the molar ratio of Bi/Ti is 2%, the sample has the highest photocatalytic activity. The enhanced photocatalytic performance of BiOI/TiO₂ could be ascribed to the separation properties of photo-induced charge carriers and strong interaction between BiOI and TiO₂. Based on the observations, a Z-scheme charge separation mechanism was proposed.     

TiO2 photocatalysis: Design and applications

TiO₂ photocatalysis is widely used in a variety of applications and products in the environmental and energy fields, including self-cleaning surfaces, air and water purification systems, sterilization, hydrogen evolution, and photoelectrochemical conversion. The development of new materials, however, is strongly required to provide enhanced performances with respect to the photocatalytic properties and to find new uses for TiO₂ photocatalysis. In this review, recent developments in the area of TiO₂ photocatalysis research, in terms of new materials from a structural design perspective, have been summarized. The dimensionality associated with the structure of a TiO₂ material can affect its properties and functions, including its photocatalytic performance, and also more specifically its surface area, adsorption, reflectance, adhesion, and carrier transportation properties. We provide a brief introduction to the current situation in TiO₂ photocatalysis, and describe structurally controlled TiO₂ photocatalysts which can be classified into zero-, one-, two-, and three-dimensional structures. Furthermore, novel applications of TiO₂ surfaces for the fabrication of wettability patterns and for printing are discussed.     

锐钛矿(001)与(101)晶面在光催化反应中的作用

采用水热法制备了(001)和(101)晶面暴露的单晶锐钛矿TiO₂颗粒. 利用光还原沉积贵金属(Au, Ag, Pt)和光氧化沉积金属氧化物(PbO₂, MnO_x)的方法研究了暴露的锐钛矿(001)和(101)晶面在光催化中的作用. 通过透射电子显微镜(TEM)、扫描电子显微镜(STM)、能量色散X射线光谱仪(EDX)和X射线光电子能谱(XPS)的表征, 发现发生光还原反应生成的贵金属粒子主要沉积在暴露的锐钛矿(101)晶面上, 而发生光氧化反应产生的金属氧化物颗粒主要沉积在暴露的锐钛矿(001)晶面上. 此结果表明光激发产生的电子与空穴主要并分别分布在单晶锐钛矿TiO₂的(101)与(001)晶面上, 并在其上参与光催化还原反应和氧化反应. 同时也表明暴露的不同晶面对光生电荷具有分离效应. 基于本研究可以认为同时暴露分别进行氧化和还原反应的晶面可以有效促进光催化反应.     

Recent advances in kaolinite-based material for photocatalysts

The composite catalytic materials based on the mineral kaolinite are considered to be a potential approach for solving global energy scarcity and environmental pollution, which have excellent catalytic performance, low cost and excellent chemical stability. However, pure kaolinite does not have visible light absorption ability and cannot be used as a potential photocatalytic material. Fortunately, the unique physical and chemical properties of kaolinite can be acted as a good semiconductor carrier. Herein, this paper firstly presents the mineralogical characteristics of kaolinite. Next, kaolinite-based photocatalysts (such as TiO₂/kaolinite, g-C₃N₄/kaolinite, g-C₃N₄/TiO₂/kaolinite, ZnO) are discussed in detail from the formation of heterostructures, synthesis-modification methods, photocatalytic mechanisms, and electron transfer pathways. Furthermore, the specific role of kaolinite in photocatalytic materials is summarized and discussed. In addition, the photocatalytic applications of kaolinite-based photocatalysts in the fields of water decomposition, pollutant degradation, bacterial disinfection are reviewed. However, the modification of kaolinite is hard, the manufacture of a large number of kaolinite-based photocatalysts is difficult, the cost of doping noble metals is expensive, and the utilization rate of visible light is low, which limits its application in industrial practice. Finally, this paper presents some perspectives on the future development of kaolinite-based photocatalysts.     

The photocatalytic properties of amorphous TiO2 composite films deposited by magnetron sputtering

The preparation of amorphous TiO₂ film coupled with various metal-oxide semiconductors and their photocatalytic activities evaluated by photo-degradation of methylene blue and rhodamine B aqueous solution are briefly reviewed. The proposed photoreaction mechanism of the amorphous composite semiconductor and the differences between amorphous TiO₂-based films and crystalline TiO₂ photocatalytic materials in terms of preparation and usage are addressed. The inactive intrinsic amorphous TiO₂ film coupled with various metal oxides were found to gain high photocatalytic activity. These dopants induce forming new energy levels in the band gap of TiO₂ to enhance the charge separation of the photoinduced electrons and holes and extend the light absorption of TiO₂-based photocatalytic films into the visible region. In addition, two different effects of coupling metal oxides have been proved: the introduction of oxides of W, Cr, V, Ag, and Mo can significantly increase the photo-reactivity of amorphous TiO₂ film, while the combination of oxides of Zr, Sn, Sb, Cu, Ta, Fe, and Ni cannot affect the inactivity of pure amorphous TiO₂ film.     

Curious behaviors of photogenerated electrons and holes at the defects on anatase,rutile, and brookite TiO2 powders: A review

Photocatalytic reactions are governed by photogenerated charge carriers upon band gap excitation. Therefore, for better understanding of the mechanism, the dynamics of photocarriers should be studied. One of the attractive materials is TiO₂, which has been extensively investigated in the field of photocatalysis. This review article summarizes our recent works of time-resolved visible to mid-IR absorption measurements to elucidate the difference of anatase, rutile, and brookite TiO₂ powders. The distinctive photocatalytic activities of these polymorphs are determined by the electron-trapping processes at the defects on powders. Powders are rich in defects and these defects capture photogenerated electrons. The depth of the trap is crystal phase dependent, and they are estimated to be < 0.1 eV, ∼0.4 eV and ∼0.9 eV for anatase, brookite, and rutile, respectively. Electron trapping reduces probability to meet with holes and then elongate the lifetime of holes. Therefore, it works negatively for the reaction of electrons but positively works for the reaction of holes. In the steady-state reactions, both electrons and holes should be consumed. Hence, the balance between the positive and negative effects of defects determines the distinctive photocatalytic activities of anatase, rutile, and brookite TiO₂ powders.     

Interfacial charge transfer in carbon nitride heterojunctions monitored by optical methods

Solar energy conversion is inciting tremendous research efforts in many fields due to the vast potential of sunlight as a sustainable energy source. For solar energy to become widely used and become a major component of our energy mix, energy storage on large scales must be addressed and the components used must be abundant. Artificial photosynthesis to produce solar fuels holds promise as a way to convert solar energy into storable energy. Organic photocatalysts have rapidly established themselves as a viable alternative to inorganic systems. Organic photocatalyst can be prepared from inexpensive precursors and offer a synthetic versatility and tunability that can be exploited to improve efficiencies. Carbon nitride (CN_x) has emerged as a leading organic photocatalyst with advantageous chemical and photo stabilities. Recombination of photogenerated electrons and holes limit the efficiency of CN_x materials below levels necessary to become a viable energy production system. To improve the efficiency and key characteristics such as light harvesting, charge carrier lifetime, and interfacial rate of charge transfer, a second material is put in contact with CN_x to form a heterojunction. While there are many examples of heterojunctions improving the photocatalytic activity beyond that of the isolated CN_x, we are still lacking the deep understanding of charge carrier dynamics necessary to rationalize the improvements and design optimal junctions. This review covers the studies of CN_x heterojunctions that have used optical methods to monitor the charge carrier dynamics. Time-resolved photoluminescence (TRPL) is the most common technique used and there are many examples that have used transient absorption spectroscopy (TAS) to probe the charge carrier dynamics. However, attempting to link the lifetime change to the activity differences does not yield a clear trend. It is likely that the reactive charges are not consistently being monitored and is obscuring the expected correlations. Both shorter and longer charge carrier lifetimes can be observed with both TRPL and TAS techniques and can be interpreted as arising from interfacial charge separation. Even when the same materials are used in the junction there is no consistency in observing a shorter or longer lifetime. The holistic view of charge carrier dynamics in CN_x heterojunctions presented here intends to identify overarching themes from a wide range of CN_x-containing systems and help take stock of where our current understanding stands. More specific spectral assignments and linking the observed lifetimes to certain photophysical or photochemical processes are needed to build models to help us understand the links between the charge carrier dynamics and the activity. These are crucial to develop general strategies that will lead to optimal CN_x heterojunctions.     

Pure and modified TiO2 photocatalysts and their environmental applications

Semiconductor photocatalysis is a process that harnesses light energy in chemical conversions. In particular, its applications to environmental remediation have been intensively investigated. The characteristics of TiO₂, the most popular photocatalyst, is briefly described and selected studies on the degradation/conversion of various recalcitrant pollutants using pure and modified TiO₂ photocatalysts, which were carried out in this group, are reviewed. Photocatalytic reactions are multi-phasic and take place at interfaces of not only water/TiO₂ and air/TiO₂ but also solid/TiO₂. Examples of photocatalytic reactions of various organic and inorganic substrates that are converted through the photocatalytic oxidation or reduction are introduced. TiO₂ has been modified in various ways to improve its photocatalytic activity. Surface modifications of TiO₂ that include surface platinization, surface fluorination, and surface charge alteration are discussed and their applications to pollutants degradation are also described in detail.     

Introducing sulfur vacancies and in-plane SnS2/SnO2 heterojunction in SnS2 nanosheets to promote photocatalytic activity

Due to the relatively sluggish charge carrier separation in metal sulfides, the photocatalytic activity of them is still far lower than expected. Herein, sulfur vacancies and in-plane SnS₂/SnO₂ heterojunction were successfully introduced into the SnS₂ nanosheets through high energy ball-milling. These defective structures were studied by the electron paramagnetic resonance, Raman spectra, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscope analyses. The sulfur vacancies and in-plane heterojunctions strongly accelerate the separation of photoexcited electron-hole pairs, as confirmed by the photoluminescence emission spectra and time-resolved photoluminescence decay spectra. The introduction of sulfur vacancies and in-plane heterojunction in SnS₂ nanosheets results in roughly six times higher photodegrading rate for methyl orange and four times higher photocatalytic reduction rate of Cr⁶⁺ than those of pure SnS₂ nanosheets.     

Photocatalytic activities of C–N-doped TiO2 nanotube array/carbon nanorod composite

A C–N-doped TiO₂ nanotube (NT)/carbon nanorod composite is fabricated by chemical vapor deposition (CVD). Carbon nanorods are grown from the TiO₂ NTs, and partly graphitized, while TiO₂ is in the mixture of anatase and rutile. The C–N doping shifts the absorption edge of TiO₂ NTs to the visible light region; the formed carbon nanorods promote the charge carrier transfer from the TiO₂ surface to the electrolyte. Under the simulated solar light irradiation, the C–N-doped TiO₂ NTs show higher photocatalytic activity in the degradation of methyl orange (MO) than the undoped TiO₂ NTs.     

TiO2 Nanotube Arrays Modified with Cr‐Doped SrTiO3 Nanocubes for Highly Efficient Hydrogen Evolution under Visible Light

In recent decades, solar‐driven hydrogen production over semiconductors has attracted tremendous interest owing to the global energy and environmental crisis. Among various semiconductor materials, TiO₂ exhibits outstanding photocatalytic properties and has been extensively applied in diverse photocatalytic and photoelectric systems. However, two major drawbacks limit practical applications, namely, high charge‐recombination rate and poor visible‐light utilization. In this work, heterostructured TiO₂ nanotube arrays grafted with Cr‐doped SrTiO₃ nanocubes were fabricated by simply controlling the kinetics of hydrothermal reactions. It was found that coupling TiO₂ nanotube arrays with regular SrTiO₃ nanocubes can significantly improve the charge separation. Meanwhile, doping Cr cations into SrTiO₃ nanocubes proved to be an effective and feasible approach to enhance remarkably the visible‐light response, which was also confirmed by theoretical calculations. As a result, the rate of photoelectrochemical hydrogen evolution of these novel heteronanostructures is an order of magnitude larger than those of TiO₂ nanotube arrays and other previously reported SrTiO₃/TiO₂ nanocomposites under visible‐light irradiation. Furthermore, the as‐prepared Cr‐doped SrTiO₃/TiO₂ heterostructures exhibit excellent durability and stability, which are favorable for practical hydrogen production and photoelectric nanodevices.     

Parasitic Light Absorption,Rate Laws and Heterojunctions in the Photocatalytic Oxidation of Arsenic(III) Using Composite TiO2/Fe2O3

Composite photocatalyst-adsorbents such as TiO₂/Fe₂O₃ are promising materials for the one-step treatment of arsenite contaminated water. However, no previous study has investigated how coupling TiO₂ with Fe₂O₃ influences the photocatalytic oxidation of arsenic(III). Herein, we develop new hybrid experiment/modelling approaches to study light absorption, charge carrier behaviour and changes in the rate law of the TiO₂/Fe₂O₃ system, using UV-Vis spectroscopy, transient absorption spectroscopy (TAS), and kinetic analysis. Whilst coupling TiO₂ with Fe₂O₃ improves total arsenic removal by adsorption, oxidation rates significantly decrease (up to a factor of 60), primarily due to the parasitic absorption of light by Fe₂O₃ (88 % of photons at 368 nm) and secondly due to changes in the rate law from disguised zero-order kinetics to first-order kinetics. Charge transfer across this TiO₂-Fe₂O₃ heterojunction is not observed. Our study demonstrates the first application of a multi-adsorbate surface complexation model (SCM) towards describing As(III) oxidation kinetics which, unlike Langmuir-Hinshelwood kinetics, includes the competitive adsorption of As(V). We further highlight the importance of parasitic light absorption and catalyst fouling when designing heterogeneous photocatalysts for As(III) remediation.     

Investigation of Electron Behavior in Nano‐TiO2 Photocatalysis by Using In Situ Open‐Circuit Voltage and Photoconductivity Measurements

The in situ open‐circuit voltages (V_oc) and the in situ photoconductivities have been measured to study electron behavior in photocatalysis and its effect on the photocatalytic oxidation of methanol. It was observed that electron injection to the conduction band (CB) of TiO₂ under light illumination during photocatalysis includes two sources: from the valence band (VB) of TiO₂ and from the methanol molecule. The electron injection from methanol to TiO₂ is slower than that directly from the VB, which indicates that the adsorption mode of methanol on the TiO₂ surface can change between dark and illuminated states. The electron injection from methanol to the CB of TiO₂ leads to the upshift of the Fermi level of electrons in TiO₂, which is the thermodynamic driving force of photocatalytic oxidation. It was also found that the charge state of nano‐TiO₂ is continuously changing during photocatalysis as electrons are injected from methanol to TiO₂. Combined with the apparent Langmuir–Hinshelwood kinetic model, the relation between photocatalytic kinetics and electrons in the TiO₂ CB was developed and verified experimentally. The photocatalytic rate constant is the variation of the Fermi level with time, based on which a new method was developed to calculate the photocatalytic kinetic rate constant by monitoring the change of V_oc with time during photocatalysis.     

Hydrothermal synthesis of TiO2 nanorods: formation chemistry,growth mechanism,and tailoring of surface properties for photocatalytic activities

Titanium dioxide (TiO₂) is one of the best semiconductor photocatalysts with optical band gap of 3.2 eV. The optical band gap and photocatalytic properties could be further tuned by tailoring shape, size, composition, and morphology of the nanostructures. Hydrothermal synthesis methods have been applied to produce well-controlled nanostructured TiO₂ materials with different morphologies and improved optoelectronic properties. Among various morphologies, one-dimensional (1D) TiO₂ nanostructures are of great importance in the field of energy, environmental, and biomedical because of the directional transmission properties resulting from their 1D geometry. Particularly, TiO₂ nanorods (NRs) have gained special attention because of their densely packed structure, quantum confinement effect, high aspect ratio, and large specific surface area that could specially improve the directional charge transmission efficiency. This results in the effective photogenerated charge separation and light absorption, which are really important for potential applications of TiO₂-based materials for photocatalytic and other important applications. In this review, hydrothermal syntheses of TiO₂ NRs including the formation chemistry and the growth mechanism of NRs under different chemical environments and effects of various synthesis parameters (pH, reaction temperature, reaction time, precursors, solvents etc.) on morphology and optoelectronic properties have been discussed. Recent developments in the hydrothermal synthesis of TiO₂ NRs and tailoring of their surface properties through various modification strategies such as defect creation, doping, sensitization, surface coating, and heterojunction formation with various functional nanomaterials (plasmonic, oxide, quantum dots, graphene-based nanomaterials, etc.) have been reported to improve the photocatalytic activities. Furthermore, applications of TiO₂ NRs/tailored TiO₂ NRs as superior photocatalysts in degradation of organic pollutants and bacterial disinfection have been discussed with emphasis on mechanisms of action and recent advances in the fields.     

SrTiO3/TiO2 Hybridstructure as Photoanode in Dye‐Sensitized Solar Cell

In dye‐sensitized solar cells (DSSCs), the charge recombination at the TiO₂/dye/electrolyte interface greatly influences the photoelectron conversion efficiency. Hybrid semiconductor materials with matched band potentials are designed to reduce the charge recombination. In this study, SrTiO₃/TiO₂ hybridstructure was synthesized by using TiO₂ nanoparticles as template in a hydrothermal, showing a negative shift in the flat band potential. The DSSC with the SrTiO₃/TiO₂ anode exhibits an increased photovoltage and a reduced photocurrent. The suppression of charge recombination at the TiO₂/dye/electrolyte interface was observed in the electrochemical impedance spectroscopy, causing an improvement in the photovoltage. However, the SrTiO₃/TiO₂ system shows an obstructed electrons injection from the dye to SrTiO₃/TiO₂, limiting the photocurrent performance. The photoelectrochemical properties of the SrTiO₃/TiO₂ system are discussed in detail herein.     

Synthesis and Study of Plasmon‐Induced Carrier Behavior at Ag/TiO2 Nanowires

Nanocomposites of Ag/TiO₂ nanowires with enhanced photoelectrochemical performance have been prepared by a facile solvothermal synthesis of TiO₂ nanowires and subsequent photoreduction of Ag⁺ ions to Ag nanoparticles (AgNPs) on the TiO₂ nanowires. The as‐prepared nanocomposites exhibited significantly improved cathodic photocurrent responses under visible‐light illumination, which is attributed to the local electric field enhancement of plasmon resonance effect near the TiO₂ surface rather than by the direct transfer of charge between the two materials. The visible‐light‐driven photocatalytic performance of these nanocomposites in the degradation of methylene blue dye was also studied, and the observed improvement in photocatalytic activity is associated with the extended light absorption range and efficient charge separation due to surface plasmon resonance effect of AgNPs.     

Accelerating photocatalytic hydrogen evolution and pollutant degradation by coupling organic co-catalysts with TiO2

Accelerating the separation efficiency of photoexcited electron-hole pairs with the help of highly active co-catalysts has proven to be a promising approach for improving photocatalytic activity. Thus far, the most developed co-catalysts for semiconductor-based photocatalysis are inorganic materials; the employment of a specific organic molecule as a co-catalyst for photocatalytic hydrogen evolution and pollutant photodegradation is rare and still remains a challenging task. Herein, we report on the use of an organic molecule, oxamide (OA), as a novel co-catalyst to enhance electron-hole separation, photocatalytic H₂ evolution, and dye degradation over TiO₂ nanosheets. OA-modified TiO₂ samples were prepared by a wet chemical route and demonstrated improved light absorption in the visible-light region and more efficient charge transport. The photocatalytic performance of H₂ evolution from water splitting and rhodamine B (RhB) degradation for an optimal OA-modified TiO₂ photocatalyst reached 2.37 mmol g^-1 h^-1 and 1.43 × 10^?2 min^?1, respectively, which were 2.4 and 3.8 times higher than those of pristine TiO₂, respectively. A possible mechanism is proposed, in which the specific π-conjugated structure of OA is suggested to play a key role in the enhancement of the charge transfer and catalytic capability of TiO₂. This work may provide advanced insight into the development of a variety of metal-free organic molecules as functional co-catalysts for improved solar-to-fuel conversion and environmental remediation.