Study Characteristics of New Concrete Mixes and their Mechanical,Physical, and Gamma Radiation Attenuation Features

Ordinary concrete and those of different compositions are regarded as suitable material in many applications concerning with gamma and neutron radiation shielding purposes. They are widely used in nuclear power plant, medical facilities, nuclear shelters, and for radioactive materials transportation as well as storage of radioactive wastes. In this study four different concrete mixes were prepared with the following different types of coarse aggregates: dolomite, barite, goethite, and steel slag. The effect of changes in the fine aggregates, selected to be 50 % local sand and 50 % limonite with addition of 10 % silica fume (SF) and 10 % fly ash (FA) by replacement of the total cement weight, on the performance of the samples was also investigated. To examine the performance of such samples for radiation shielding applications, a set of physical, mechanical, and radiation attenuation properties was studied and compared with those of ordinary concrete. This investigation includes compressive strength, slump test, bulk density, ultrasonic pulse velocity test, and gamma rays attenuation measurements for the different samples. A verification of the experimental results concerning the radiation attenuation measurements was performed using WinXcom program (Version 3.1). The experimental results revealed that all concrete mixes; goethite‐limonite concrete (G.L), barite‐limonite concrete (B.L), steel slag‐limonite concrete (S.L) and dolomite concrete (D.C) have good physical and mechanical properties that successfully satisfying them as high performance concretes. In addition the barite‐limonite and the steel slag‐limonite have the higher γ‐ray attenuation coefficients at low and high energy range and hence have a better radiation shielding. The obtained results from WinXcom program calculations showed a good agreement with the experimental results concerning γ‐ray attenuation measurements for the studied concrete mixes.     

N‐(2‐Ethylhexyl)carbazole: A New Fluorophore Highly Suitable as a Monomolecular Liquid Scintillator

The synthesis, photophysical properties, and applications in scintillation counting of N‐(2‐ethylhexyl)carbazole (EHCz) are reported. This molecule displays all of the required characteristics for an efficient liquid scintillator (emission wavelength, scintillation yield), and can be used without any extra fluorophores. Thus, its scintillation properties are discussed, as well as its fast neutron/gamma discrimination. For the latter application, the material is compared with the traditional liquid scintillator BC‐501 A, and other liquid fluorescent molecules classically used as scintillation solvents, such as xylene, pseudocumene (PC), linear alkylbenzenes (LAB), diisopropylnaphthalene (DIN), 1‐methylnaphthalene (1‐MeNapht), and 4‐isopropylbiphenyl (iPrBiph). For the first time, an excimeric form of a molecule has been advantageously used in scintillation counting. A moderate discrimination between fast neutrons and gamma rays was observed in bulk EHCz, with an apparent neutron/gamma discrimination potential half of that of BC‐501 A.     

Neutron beam preparation with Am–Be source for analysis of biological samples with PGNAA method

Material analysis with prompt gamma neutron activation analysis (PGNAA) requires a proper geometrical arrangement for equipments in laboratory. Application of PGNAA in analysis of biological samples, due to small size of sample, needs attention to the dimension of neutron beam. In our work, neutron source has been made of ²⁴¹Am–Be type. Activity of ²⁴¹Am was 20 Ci which lead to neutron source strength of 4.4 × 10⁷ neutrons per second. Water has been considered as the basic shielding material for the neutron source. The effect of various concentration of boric acid in the reduction of intensity of fast and thermal components of the neutron beam and gamma ray has been investigated. Gamma ray is produced by (α, n) reaction in Am–Be source (4.483 MeV), neutron capture by hydrogen (2.224 MeV), and neutron capture by boron (0.483 MeV). Various types of neutron and gamma ray dosimeters have been employed including BF₃ and NE-213 detectors to detect fast and thermal neutrons. BGO scintillation detector has been used for gamma ray spectroscopy. It is shown that the gamma and neutron radiation dose due to direct beam is of the same magnitude as the dose due to radiation scattered in the laboratory ambient. It is concluded that 14 kg boric acid dissolved in 1,000 kg water is the optimum solution to surround the neutron source. The experimental results have been compared with Monte Carlo simulation.     

The influence of the substituent position in monocarboxymethyl‐γ‐cyclodextrins on enantioselectivity in capillary electrophoresis

Three newly synthesized chiral selectors, namely, 2^I‐O‐, 3^I‐O‐, and 6^I‐O‐carboxymethyl‐γ‐cyclodextrin, native γ‐cyclodextrin, and commercially available carboxymethylated γ‐cyclodextrin with degree of substitution of 3–6 were used as additives in a background electrolyte composed of phosphate buffer at 20 mmol/L concentration and pH 2.5. This system was used for the analysis of several biologically significant low‐molecular‐mass chiral compounds by capillary electrophoresis. The results confirmed that the position of carboxymethyl group influences the enantioseparation efficiency of all the studied analytes. The 2^I‐O‐ and 3^I‐O‐ regioisomers provide a significantly better resolution than native γ‐cyclodextrin, while the 6^I‐O‐regioisomer gives only a slightly better enantioseparation than native γ‐cyclodextrin. The application of γ‐cyclodextrin possessing higher number of carboxymethyl groups led to the best resolution for the majority of the compounds analyzed.     

Synthesis of β‐Substituted γ‐Aminobutyric Acid Derivatives through Enantioselective Photoredox Catalysis

β‐Substituted chiral γ‐aminobutyric acids feature important biological activities and are valuable intermediates for the synthesis of pharmaceuticals. Herein, an efficient catalytic enantioselective approach for the synthesis of β‐substituted γ‐aminobutyric acid derivatives through visible‐light‐induced photocatalyst‐free asymmetric radical conjugate additions is reported. Various β‐substituted γ‐aminobutyric acid analogues, including previously inaccessible derivatives containing fluorinated quaternary stereocenters, were obtained in good yields (42–89 %) and with excellent enantioselectivity (90–97 % ee). Synthetically valuable applications were demonstrated by providing straightforward synthetic access to the pharmaceuticals or related bioactive compounds (S)‐pregabalin, (R)‐baclofen, (R)‐rolipram, and (S)‐nebracetam.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Influence of substituent position and cavity size of the regioisomers of monocarboxymethyl‐α‐, β‐, and γ‐cyclodextrins on the apparent stability constants of their complexes with both enantiomers of Tröger's base

Enantiomers of Tröger's base were separated by capillary electrophoresis using 2^I‐O‐, 3^I‐O‐, and 6^I‐O‐carboxymethyl‐α‐, β‐, and γ‐cyclodextrin and native α‐, β‐, and γ‐cyclodextrin as chiral additives at 0–12 mmol/L for β‐cyclodextrin and its derivatives and 0–50 mmol/L for α‐ and γ‐cyclodextrins and their derivatives in a background electrolyte composed of sodium phosphate buffer at 20 mmol/L concentration and pH 2.5. Apparent stability constants of all cyclodextrin–Tröger's base complexes were calculated based on capillary electrophoresis data. The obtained results showed that the position of the carboxymethyl group as well as the cavity size of the individual cyclodextrin significantly influences the apparent stability constants of cyclodextrin–Tröger's base complexes.     

Investigation of fast neutron shielding characteristics depending on boron percentages of MgB<Subscript>2</Subscript>, NaBH<Subscript>4</Subscript> and KBH<Subscript>4</Subscript>

The macroscopic cross-section Σ and average neutron fluence in matter Φ are usable factors to comment neutron shielding property of samples. In this paper, we have used MgB₂, NaBH₄ and KBH₄ samples including different percentages of boron. Neutron macroscopic cross-section measurements of them have been done by using a source of mono-energetic neutrons (E _eff = 4.5 MeV ²⁴¹Am–Be). Average neutron fluence values and double differential fast neutron flux distributions of each samples calculated by using FLUKA Monte Carlo code. Also half value layers (HVLs) of samples are compared to paraffin which is one of the most neutron moderators. As a result, growing boron concentration can raise neutron shielding property of materials.     

Phosphoryl group differentiating α‐amino acids from β‐ and γ‐amino acids in prebiotic peptide formation

In recent years β‐amino acids have increased their importance enormously in defining secondary structures of β‐peptides. Interest in β‐amino acids raises the question: Why and how did nature choose α‐amino acids for the central role in life? In this article we present experimental results of MS and ³¹P NMR methods on the chemical behavior of N‐phosphorylated α‐alanine, β‐alanine, and γ‐amino butyric acid in different solvents. N‐Phosphoryl α‐alanine can self‐assemble to N‐phosphopeptides either in water or in organic solvents, while no assembly was observed for β‐ or γ‐amino acids. An intramolecular carboxylic–phosphoric mixed anhydride (IMCPA) is the key structure responsible for their chemical behaviors. Relative energies and solvent effects of three isomers of IMCPA derived from α‐alanine (2a–c), with five‐membered ring, and five isomers of IMCPA derived from β‐alanine (4a–e), with six‐membered ring, were calculated with density functional theory at the B3LYP/6‐31G** level. The lower relative energy (3.2 kcal/mol in water) of 2b and lower energy barrier for its formation (16.7 kcal/mol in water) are responsible for the peptide formation from N‐phosphoryl α‐alanine. Both experimental and theoretical studies indicate that the structural difference among α‐, β‐, and γ‐amino acids can be recognized by formation of IMCPA after N‐phosphorylation. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 232–241, 2003     

A novel shielding material prepared from solid waste containing lead for gamma ray

Human beings are continuously exposed to cosmogenic radiation and its products in the atmosphere from naturally occurring radioactive materials (NORM) within Earth, their bodies, houses and foods. Especially, for the radiation protection environments where high ionizing radiation levels appear should be shielded. Generally, different materials are used for the radiation shielding in different areas and for different situations. In this study, a novel shielding material produced by a metallurgical solid waste containing lead was analyzed as shielding material for gamma radiation. The photon total mass attenuation coefficients (μ/ρ) were measured and calculated using WinXCom computer code for the novel shielding material, concrete and lead. Theoretical and experimental values of total mass attenuation coefficient of the each studied sample were compared. Consequently, a new shielding material prepared from the solid waste containing lead could be preferred for buildings as shielding materials against gamma radiation.     

Nano n‐propylsulfonated γ‐Al2O3: a new,efficient and reusable catalyst for synthesis of spiro[indoline‐3,4‐pyrazolo[3,4‐e][1,4]thiazepine]diones in aqueous media

Nano n‐propylsulfonated γ‐Al₂O₃ is easily prepared by the reaction of nano γ‐Al₂O₃ with 1,3‐propanesultone. This reagent can be used as an efficient catalyst for the synthesis of spiro [indoline‐3,4‐pyrazolo[3,4‐e][1,4]thiazepine]diones in aqueous media. This new method consistently has the advantages of excellent yields and short reaction times. Further, the catalyst can be reused and recovered several times. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of polyarylacetylenes by γ‐ray‐induced polymerization of terminal alkynes. Nanostructures of ortho‐substituted derivatives

Terminal aryl alkynes RC₆H₄C?CH with substituents of different electronic properties and ring position (R = H, 4‐CF₃, 4‐OMe, 2‐CF₃, 2‐OMe, 2‐Me) were exposed to γ‐radiation (50–400 kGy) in organic solvents (hexane, 1,4‐dioxane, ethylacetate, methanol, tetrahydrofuran), at room temperature. The effects arising from substituent, solvent, dilution, and radiation dose allowed to define the conditions suitable for polymerization, which was favored in methanol at increasing dilution of the alkyne. Ortho‐substitution represented the key structural element in the substrate, and the derived polyarylacetylenes were characterized in detail, including gel permeation chromatography, thermal analysis, infrared, NMR, UV–vis, fluorescence, and scanning electron microscope spectroscopy. The results are consistent with the formation of irregular polymers mainly composed of trans‐transoid chains. Controlled aggregation of the polymers by means of an osmosis‐based procedure in solvent/non‐solvent mixtures allowed the formation of nanostructured materials, in particular of hollow nanospheres from THF/water. The methodology sets the basis for the development of γ‐rays‐induced polymerization of alkynes, in a transition metal catalyst‐free environment. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Direct Monitoring of γ‐Glutamyl Transpeptidase Activity In Vivo Using a Hyperpolarized 13C‐Labeled Molecular Probe

The γ‐glutamyl transpeptidase (GGT) enzyme plays a central role in glutathione homeostasis. Direct detection of GGT activity could provide critical information for the diagnosis of several pathologies. We propose a new molecular probe, γ‐Glu‐[1‐¹³C]Gly, for monitoring GGT activity in vivo by hyperpolarized (HP) ¹³C magnetic resonance (MR). The properties of γ‐Glu‐[1‐¹³C]Gly are suitable for in vivo HP ¹³C metabolic analysis since the chemical shift between γ‐Glu‐[1‐¹³C]Gly and its metabolic product, [1‐¹³C]Gly, is large (4.3 ppm) and the T₁ of both compounds is relatively long (30 s and 45 s, respectively, in H₂O at 9.4 T). We also demonstrate that γ‐Glu‐[1‐¹³C]Gly is highly sensitive to in vivo modulation of GGT activity induced by the inhibitor acivicin.     

Two‐Step Synthesis of Multifunctional γ‐Lactams from γ‐Lactone

We present herein an efficient and rapid method for the synthesis of N,1‐dialkyl‐4‐(2‐hydroxyethyl)‐5‐oxopyrrolidine‐3‐carboxamides based on the conversion of γ‐lactone to γ‐lactam via the conjugate addition of primary amines to an ethyl α‐functionalized acrylate followed by intramolecular cyclization.     

Performance comparison of 2.8 MeV and <Superscript>241</Superscript>Am-Be neutrons based moisture measurement setups

Performance of a ²⁴¹Am-Be neutron source-based and 2.8 MeV neutrons-based moisture measurement setups have been compared using Monte Carlo simulation. In the setup fast neutrons transmitted through the sample were detected by a fast neutron detector, which was placed behind a massive long double truncated collimator. The setup geometry was optimized to detect maximum effect of 1–7 wt.% moisture on the neutron intensity transmitted through the sample. The yield of neutrons transmitted through concrete, coal, wood and soil samples containing 1–7 wt.% moisture was calculated for 2.8 MeV neutrons and neutrons from an ²⁴¹Am-Be source. The slopes of the fast neutron intensities transmitted through the samples vs. their moisture contents are very sensitive to the neutron energy and the sample composition. Higher slopes have been observed for the samples with larger bulk density. The slopes of fast neutron yield show dependence on the incident neutron energy. Larger slopes have been observed for neutrons with samller energy. Due to the overall large slopes of the transmitted intensity data of the samples for 2.8 MeV neutrons, it is expected to achieve better sensitivity in moisture measurements for a 2.8 MeV neutrons based moisture setup.     

γ‐Butyrolactone Copolymerization with the Well‐Documented Polymer Drug Carrier Poly(ethylene oxide)‐block‐poly(ε‐caprolactone) to Fine‐Tune Its Biorelevant Properties

Polymeric drug carriers exhibit excellent properties that advance drug delivery systems. In particular, carriers based on poly(ethylene oxide)‐block‐poly(ε‐caprolactone) are very useful in pharmacokinetics. In addition to their proven biocompatibility, there are several requirements for the efficacy of the polymeric drug carriers after internalization, e.g., nanoparticle behavior, cellular uptake, the rate of degradation, and cellular localization. The introduction of γ‐butyrolactone units into the hydrophobic block enables the tuning of the abovementioned properties over a wide range. In this study, a relatively high content of γ‐butyrolactone units with a reasonable yield of ≈60% is achieved by anionic ring‐opening copolymerization using 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene as a very efficient catalyst in the nonpolar environment of toluene with an incorporated γ‐butyrolactone content of ≈30%. The content of γ‐butyrolactone units can be easily modulated according to the feed ratio of the monomers. This method enables control over the rate of degradation so that when the content of γ‐butyrolactone increases, the rate of degradation increases. These findings broaden the application possibilities of polyester‐polyether‐based nanoparticles for biomedical applications, such as drug delivery systems.     

Electrochemical Oxidative C−H/N−H Coupling between γ‐Lactams and Anilines

A mild method for the direct C?H/N?H coupling between γ‐lactams and anilines through electrochemical oxidation has been developed. The protocol proceeded smoothly without metal catalysts at room temperature to afford γ‐substituted γ‐lactams in good yields. It has been revealed that the quasi‐divided cell which provided high current density on the anode was crucial for this reaction.     

Pd(II)‐Catalyzed Tandem Enantioselective Methylene C(sp3)−H Alkenylation–Aza‐Wacker Cyclization to Access β‐Stereogenic γ‐Lactams

Herein, we describe an unprecedented cascade reaction to β‐stereogenic γ‐lactams involving Pd(II)‐catalyzed enantioselective aliphatic methylene C(sp³)?H alkenylation–aza‐Wacker cyclization through syn‐aminopalladation. Readily available 3,3′‐substituted BINOLs are used as chiral ligands, providing the corresponding γ‐lactams with broad scope and high enantioselectivities (up to 98 % ee).     

Novel electromagnetic functionalized γ‐Fe2O3/polypyrrole composite nanostructures with high conductivity

In general, the conductivity of polypyrrole (PPy) is reduced by addition of magnetic nanoparticles as the additives owing to insulating effect of magnetic nanoparticles. In this article, novel electromagnetic functionalized PPy composite nanostructures were prepared by a template‐free method associated with γ‐Fe₂O₃ nano‐needles as the hard templates in the presence of p‐toluene‐sulfonic acid (p‐TSA) and FeCl₃·6H₂O as the dopant and oxidant, respectively. It was found that the molar ratio of γ‐Fe₂O₃ to pyrrole monomer represented by [γ‐Fe₂O₃]/[Py] ratio strongly affected the morphology and the conductivity of the γ‐Fe₂O₃/PPy composite nanostructures. A growth mechanism for the composite nanostructures was proposed based on the variance of the morphology with the [γ‐Fe₂O₃]/[Py] ratio. Compared with previously reported γ‐Fe₂O₃/PPy composites, the as‐prepared novel composite nanostructures showed much higher conductivity (up to ～50 times higher). Moreover, the synthesized γ‐Fe₂O₃/PPy composite nanostructures displayed ferromagnetic behavior with a high coercive force. Explanations for these interesting observations were made in terms of the magnetic interaction between ferromagnetic γ‐Fe₂O₃ nano‐needles and spin‐polaron of PPy nanotubes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4446–4453, 2009     

Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)): A highly efficient magnetically separable heterogeneous nanocatalyst for one‐pot synthesis of highly substituted imidazoles

A simple, efficient and eco‐friendly procedure has been developed using Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe₂O₃@TiO₂ (γ‐Fe₂O₃@TiO₂‐EG‐Cu(II)) for the synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles, via the condensation reactions of various aldehydes with benzil and ammonium acetate or ammonium acetate and amines, under solvent‐free conditions. High‐resolution transmission electron microscopy analysis of this catalyst clearly affirmed the formation of a γ‐Fe₂O₃ core and a TiO₂ shell, with mean sizes of about 10–20 and 5–10 nm, respectively. These data were in very good agreement with X‐ray crystallographic measurements (13 and 7 nm). Moreover, magnetization measurements revealed that both γ‐Fe₂O₃@TiO₂ and γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) had superparamagnetic behaviour with saturation magnetization of 23.79 and 22.12 emu g^?1, respectively. γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) was found to be a green and highly efficient nanocatalyst, which could be easily handled, recovered and reused several times without significant loss of its activity. The scope of the presented methodology is quite broad; a variety of aldehydes as well as amines have been shown to be viable substrates. A mechanism for the cyclocondensation reaction has also been proposed.