Photocatalytic properties of CuO/(001)‐TiO2 composites synthesized by the vapor–thermal method

Composites of (001)‐face‐exposed TiO₂ ((001)‐TiO₂) and CuO were synthesized in water vapor environment at 250°C with various Cu/Ti molar ratios (R_Cu/Ti). The resulting CuO/(001)‐TiO₂ composites were characterized using a variety of techniques. The synthesis under high‐temperature vapor allows close contact between CuO and (001)‐TiO₂, which results in the formation of heterojunctions, as evidenced by the shift of valence band maximum towards the forbidden band of TiO₂. An appropriate ratio of CuO can enhance the absorption of visible light and promote the separation of photogenerated carriers, which improve the photocatalytic performance. The degradation rate constant K_app increased from 5.5 × 10^?2 to 8.1 × 10^?2 min^?1 for R_Cu/Ti = 0.5. Additionally, the results showed that superoxide radicals (^?O₂^?) play a major role in the photocatalytic degradation of methylene blue.     

Effect of inorganic oxide supports on the activity of chromium‐based catalysts in ethylene trimerization

Novel heterogeneous catalysts were prepared using immobilization of bis(2‐decylsulfanylethyl)amine–CrCl₃ (Cr‐SNS‐D) on various supports, namely commercial TiO₂, Al₂O₃ and magnetic Fe₃O₄@SiO₂ nanoparticles, to yield solid catalysts denoted as support@Cr‐SNS‐D. The structure of the catalysts was confirmed on the basis of spectroscopic analyses, N₂ adsorption–desorption and inductively coupled plasma (ICP) analysis. The surface areas of Al₂O₃@Cr‐SNS‐D, Fe₃O₄@SiO₂@Cr‐SNS‐D and TiO₂@Cr‐SNS‐D catalysts were determined to be 70, 23 and 41 m² g^?1, respectively. A decrease in surface area from that of the supports clearly establishes accurate immobilization of Cr‐SNS‐D catalyst on the surface of the parent carriers. The loading of Cr was determined to be 0.02, 0.16 and 0.11 mmol g^?1 for Cr‐SNS‐D supported on TiO₂, Al₂O₃ and Fe₃O₄@SiO₂, respectively, using ICP analysis. After preparation and full characterization of the catalysts, ethylene trimerization reaction was accomplished in 40 ml of dry toluene, at 80°C and 25 bar ethylene pressure and in the presence of methylaluminoxane (Al/Cr = 700) within 30 min. The supported chromium catalysts were found to be efficient and selective for the ethylene trimerization reaction. The highest activity (74 650 g_1‐hexene g_Cr^?1 h^?1), as well as no polyethylene formation during reaction processes, was observed when TiO₂ was used as the catalyst support.     

Structure,atomic Hirshfeld surface,spectroscopic studies and magnetic and dielectric properties of new mixed solid solution (NH4)2Mn0.17Cu0.83Cl4⋅2H2O

The tetrachlorocupratmanganate dehydrate (NH₄)₂Mn_0.17Cu_0.83Cl₄?2H₂O has been prepared and characterized using various physicochemical techniques including Fourier transform infrared and Raman spectroscopies, differential scanning calorimetry and dielectric and magnetic measurements. A preliminary single‐crystal X‐ray diffraction structural analysis reveals that the title compound belongs to the tetragonal system with P4₍₂₎/mnm space group. The unit cell dimensions are: a = b = 7.5817(2), c = 7.9312(2) Å, with Z = 2. Its crystal structure was determined and refined down to R = 2%. The structure of this compound consists of discrete [Cu/MnCl₄?2H₂O]^2? octahedra interleaved with alkali cations. The cohesion and stabilization of the structure are provided by hydrogen bond interactions (N─H…Cl and O─H…Cl) between [NH₄]⁺ cation and [Cu/MnCl₄?2H₂O]^2? anion. Hirshfeld surface analysis has been performed to explore the behaviour of these weak interactions. Dielectric measurements confirm the transition temperatures determined using differential scanning calorimetry. The temperature dependence of the magnetic susceptibility was measured in the temperature range 10–300 K at various magnetic field intensities. Magnetic measurements reveal the occurrence of weak ferromagnetic behaviour at low temperature (T_c = 12 K). The ferromagnetic ordering is further confirmed by the presence of hysteresis loops.     

Selective oxidation of benzyl alcohol to benzaldehyde, 1‐phenylethanol to acetophenone and fluorene to fluorenol catalysed by iron (II) complexes supported by pincer‐type ligands: Studies on rapid degradation of organic dyes

Hexacoordinated non‐heme iron complexes [Fe^II(L¹)₂](ClO₄)₂ ( 1 ) and [Fe^II(L²)₂](PF₆)₂ ( 2 ) have been synthesized using ligands L¹ = (E)‐2‐chloro‐6‐(2‐(pyridin‐2ylmethylene) hydrazinyl)pyridine and L² = (E)‐2‐chloro‐6‐(2‐(1‐(pyridin‐2‐yl)ethylidene)hydrazinyl) pyridine]. These complexes are highly active non‐heme iron catalysts to catalyze the C (sp³)?H bonds of alkanes. These iron complexes have been characterized using ESI?MS analysis and molecular structures were determined by X‐ray crystallography. ESI ? MS analysis also helped to understand the generation of intermediate species like Fe^III?OOH and Fe^IV=O. DFT and TD?DFT calculations revealed that the oxidation reactions were performed through high‐valent iron center and a probable reaction mechanism was proposed. These complexes were also utilized for the degradation of orange II and methylene blue dyes.     

C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands prepared by different in situ bonding mechanisms and their use in catalytic (co)polymerization of norbornene and styrene

Two C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands with electron‐withdrawing groups (─CF₃), Ni{PhC(O)CHC[N(9‐fluorenyl)]CF₂}₂ (Ni 1 ) and Ni{CF₃C(O)CHC[N(9‐fluorenyl)]Ph}₂ (Ni 2 ), were synthesized by metal coordination reaction and different in situ bonding mechanisms. The C–C bridged bonds of Ni 1 were formed by in situ intramolecular trifluoromethyl and 9‐fluorenyl carbon–carbon cross‐coupling reaction and those of Ni 2 were formed by in situ intramolecular 9‐fluorenyl carbon–carbon radical coupling reaction mechanism. The obtained complexes were characterized using ¹H NMR spectroscopy and elemental analyses. The crystal and molecular structures of Ni 1 and Ni 2 with C–C bridged configuration were determined using X‐ray diffraction. Ni 1 and Ni 2 were used as catalysts for norbornene (NB) polymerization after activation with B(C₆F₅)₃ and the catalytic activities reached 10⁶ g_polymer mol_Ni^?1 h^?1. The copolymerization of NB and styrene catalyzed by the Ni 1 /B(C₆F₅)₃ system showed high activity (10⁵ g_polymer mol_Ni^?1 h^?1) and the catalytic activities decreased with increasing feed content of styrene. All vinyl‐type copolymers exhibited high molecular weight (10⁴ g mol^?1), narrow molecular weight distribution (M_w/M_n = 1.71–2.80), high styrene insertion ratios (11.13–50.81%) and high thermal stability (T_d > 380°C) and could be made into thin films with high transparency in the visible region (400–800 nm).     

Ionic metallo‐Schiff base polymers of VO2+, Zn2+ and Cu2+: Synthesis,characterization and solid‐state conductivity

The viologen‐type dialdehyde of [N,N′‐bis(methylsalicylaldehyde)‐4,4′‐bipyridinium] dichloride (DA) was synthesized by reacting 5‐chloromethylsalicylaldehyde and 4,4′‐bipyridine. Then a new polymeric Schiff base ligand (PSBL) was synthesized by the condensation reaction of ethylenediamine and DA in methanol under reflux conditions. Afterwards, new ionic metallo‐Schiff base polymers (IMSPs) were synthesized by reacting PSBL with VO(acac)₂, ZnCl₂ and CuCl₂ via coordination chelation. DA, PSBL and IMSPs were characterized using various analytical methods and spectral techniques. The solid‐state electrical conductivities of PSBL and IMSPs were studied. The electrical conductivity of these polymers at 300 K ranged from 1.30 × 10^?5 to 4.52 × 10^?10 Ω^?1 m^?1, which means they are potential organic and metallo‐organic semiconductors.     

Thermodynamic characterization of NiAl

Thermodynamic properties of the high-stability intermetallic compound nickel aluminide, NiAl, have been determined from mass-spectrometric, weight-loss effusion, and calorimetric measurements, using samples from a single preparation with a composition determined to be Ni_0.986Al_1.014. Per mole of NiAl molecules, the specific heat capacity at room temperature of 298 K is 48.54 J · K^?1 · mol^?1, with a linear temperature dependence of +0.0104 J · K^?2 · mol^?1. At the same temperature, the enthalpy of formation is ?133.7 kJ · mol^?1, the entropy is about 53.8 J · K^?1 · mol^?1 and the enthalpy difference between room temperature and absolute zero is 7.97 kJ · mol^?1. The Gibbs free-energy is ?130.2 kJ · mol^?1 at T = 298 K, with a linear temperature dependence of +5.04 J · K^?1 · mol^?1. The Debye temperature is 452 K, while the electronic density-of-states at the Fermi-level is about 0.29 states per eV-atom. The NiAl⁺ ions were observed in the high-temperature mass spectra. Pressures for the gas at these temperatures were estimated and used with the results of quantum-mechanical calculations of total energy, specific heat, and entropy to calculate free-energy functions for the gas. These and additional results are compared with other measurements and discussed in terms of current theories of the electronic and structural properties of the compound.     

Hexanoyl chitosan/ENR25 blend polymer electrolyte system for electrical double layer capacitor

Single salt polymer electrolytes based on hexanoyl chitosan‐ENR25 were prepared by employing LiN (CF₃SO₂)₂ or LiCF₃SO₃ as the doping salt. Elastic property of hexanoyl chitosan was enhanced with the incorporation of ENR25. DSC studies revealed immiscibility of hexanoyl chitosan and ENR25, and dissolution of salt was favored in ENR25 phase. Conductivity enhancement was observed in the blends as compared with the neat hexanoyl chitosan. The maximum conductivities achieved for LiCF₃SO₃‐ and LiN (CF₃SO₂)₂‐comprising electrolyte systems were 1.6 × 10^?8 and 5.0 × 10^?7 S cm^?1, respectively. Deconvolution of spectra bands in the v_as (SO₂^?) mode of LiN (CF₃SO₂)₂ and v_s (SO₃^?) mode of LiCF₃SO₃ has been carried out to estimate the relative percentage of free ions and associated ions. The findings were in good agreement with conductivity results. Electrical double layer capacitor (EDLC) was fabricated with hexanoyl chitosan/ENR25 (90:10)‐LiN (CF₃SO₂)₂‐EmImTFSI electrolyte and activated carbon‐based electrodes. The conductivity and electrochemical stability window of hexanoyl chitosan/ENR25‐LiN (CF₃SO₂)₂‐EmImTFSI were ~10^?6 S cm^?1 and 2.7 V, respectively. The performance of the EDLC was analyzed by cyclic voltammetry (CV) and galvanostatic charge‐discharge (GCD). From GCD, the specific capacitance of EDLC was 58.0 F g^?1 at 0.6 mA cm^?2. The specific capacitance was found to decrease with increasing current density.     

Effect of the ionic strength on the redox reaction of dicyanobis(bipyridine)iron(III)‐iodide in binary and ternary solvent systems

The redox reaction between dicyanobis(bipyridine)iron(III) and iodide ion follows first‐order kinetics in 10% (v/v) tertiary butyl alcohol‐water. The reaction was found first and zero order in iodide and dicyanobis(bipyridine)iron(III), respectively, at 0.06 M ionic strength and 293 ± 1 K. The thermodynamic parameters of activation such as E_A (16.07 kJ mol^?1), A (1 × 10^?4 M s^?1), ΔH^# (13.6 kJ mol^?1), ΔS^# (?329.81 J K^?1 mol^?1), and ΔG^# (90.1 kJ mol^?1) were determined. The effect of the ionic strength on the rate constant leads to recognizing the stabilization or destabilization of the transition state complex that forms during the rate‐determining step of the reaction. The value of the zero‐order rate constant was decreased with increasing ionic strength that yielded a negative value of the slope in each binary and ternary solvent systems. This negative sign refers to the electron transfer between opposite charge carriers such as [Fe^III(bpy)₂(CN)₂]⁺ and I^? during the rate‐determining step. The destabilization of the transition state complex is surfaced by the increasing slope, that is, 5 < 10 < 15% (v/v) tertiary butyl alcohol‐water with a gradual decrease in the rate constant. However, its stability emerges by relatively small values of the slope in 17.5 < 25 ≤ 30% (v/v) tertiary butyl alcohol‐water and 8:2:90 < 6:4:90% (v/v) dioxane: tertiary butyl alcohol: water with reasonably fast rate of reaction.     

The effect of calcination temperature on the texture of silica gel waste

In this work, the effect of temperature on the texture of silica gel waste is presented and water vapour adsorption in a different humidity is highlighted. It was found that silica gel waste is a mesoporous material with the parallel plates pores. Its specific surface area is equal to 4.61 m² g^?1, and the calculated total pore volume is equal to 9.01 × 10^?3 cm³ g^?1. The texture of silica gel waste changed during calcination in a 188–550 °C temperature interval: S_BET and ΣV_P increased to 11.32 m² g^?1 and 30.06 × 10^?3 cm³ g^?1, respectively. It was determined that the water vapour pressure influenced the mineralogical composition and the quantity of adsorbed water in the samples. The obtained results were confirmed by the differential scanning microcalorimetry, X-ray diffraction, BET and water vapour adsorption analysis data.

     

Photo‐Fenton and Riboflavin‐photosensitized Processes of the Isoxaflutole Herbicide

The proherbicide Isoxaflutole (IXF) hydrolyzes spontaneously to diketonitrile (DKN) a phytotoxic compound with herbicidal activity. In this work, the sensitized degradation of IXF using Riboflavin (Rf), a typical environmentally friendly sensitizer, Fenton and photo‐Fenton processes has been studied. The results indicate that only the photo‐Fenton process produces a significant degradation of the IXF. Photolysis experiments of IXF sensitized by Riboflavin is not a meaningful process, IXF quenches the Rf excited triplet (³Rf*) state with a quenching rate constant of 1.5 · 10⁷ m ^?1 s^?1 and no reaction is observed with the species O₂(¹Δ_g) or ${\mathrm{O}}_2^{·?}$ generated from ³Rf*. The Fenton reaction produces no changes in the IXF concentration. While the photo‐Fenton process of the IXF, under typical conditions, it produces a degradation of 99% and a mineralization to CO₂ and H₂O of 88%. A rate constant value of 1.0 × 10⁹ m ^?1 s^?1 was determined for the reaction between IXF and HO˙. The photo‐Fenton process degradation products were identified by UHPLC‐MS/MS analysis.     

Solid polymer electrolytes based on polystyrene‐polyether block copolymers having branched ether structure

To obtain solid polymer electrolytes (SPEs) having high ionic conductivity together with mechanical integrity, we have synthesized polystyrene (PSt)‐polyether (PE) diblock copolymers via one‐pot anionic polymerization. The PSt block is expected to aggregate to act as hard fillers in the SPE to enhance the mechanical property. The PE block consists of random copolymer (P(EO‐r‐MEEGE)) of ethylene oxide (EO) and 2‐(2‐methoxyethoxy) ethyl glycidyl ether (MEEGE) in different molar ratios ([EO]/[MEEGE] = 100/0, 86/14, 75/25, 68/32, and 41/59). The introduction of the MEEGE moiety in PEO reduced the crystallinity of PEO, and the fast motion of the MEEGE side chain caused plasticization of the PE block, thereby contributing to the fast ion transport. SPEs were fabricated by mixing the obtained diblock copolymer (PSE_x) and lithium bis(trifluoromethanesulfonyl) amide (LiTFSA) with [Li]/[O] = 0.05. Ionic conductivity of the obtained SPEs was dependent on the molar ratio of EO in the PE block (x) as well as the weight fraction of PE block (f_PE) in the block copolymer. PSE_0.86 (f_PE = 0.65) exhibited high ionic conductivity (3.3 × 10^?5 S cm^?1 at 30°C; 1.1 × 10^?4 S cm^?1 at 60°C) comparable with that of P(EO‐r‐MEEGE) (PE_0.85; f_PE = 1.00) (9.8 × 10^?5 S cm^?1 at 30°C; 4.0 × 10^?4 S cm^?1 at 60°C).     

Bimetallic Ni–Co‐based metal–organic framework: An open metal site adsorbent for enhancing CO2 capture

An open metal site framework named UTSA‐16 was synthesized and modified as a high‐capacity adsorbent for reversible CO₂ capture. Partial substitution of intrinsic Co²⁺ sites of UTSA‐16 with Ni²⁺ centres was realized in the molar composition range 0–75% Ni with the aim of increasing CO₂ uptake. Synthesized bimetallic Nix‐UTSA‐16 (x = 0, 20, 50, 75) materials were characterized using various techniques to assess the influence of chemical composition on CO₂ binding affinity and any subsequent physical change in morphology, crystal size and porosity on the total uptake. Experimental isotherm adsorption studies showed the following trend for CO₂ adsorption capacity employing the Nix‐UTSA‐16 series: Ni20‐UTSA‐16 > UTSA‐16 > Ni50‐UTSA‐16 > Ni75‐UTSA‐16. According to the dynamic breakthrough CO₂ profiles measured for a mixture of CO₂ and CH₄ (15/85 molar ratio), Ni20‐UTSA‐16 exhibited 2 times the breakthrough time with 1.5 times the loading capacity at 75 Nml min^?1 feed flow rate, compared to the parent UTSA‐16. In addition, the Ni20‐UTSA‐16 bimetallic metal–organic framework exhibited lower isosteric heat of adsorption compared to UTSA‐16 (ΔH_ave = 28.54 versus 46.85 kJ mol^?1). As a result, more than 95% of its capacity was restored by applying a partial vacuum for only 1 h at room temperature without involving any other time‐ and energy‐consuming regenerative step.     

Co‐catalyst effects on the thermal stability/activity of N,N,N‐Co ethylene polymerization Catalysts Bearing Fluoro‐Substituted N‐2,6‐dibenzhydrylphenyl groups

The unsymmetrical bis (arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐t‐BuC₆H₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N‐aryl group bedecked with ortho‐substituted fluorobenzhydryl groups, have been employed in the preparation of the corresponding five‐coordinate cobalt (II) chelates, LCoCl₂ ( Co1 – Co5 ); the symmetrical comparator [2,6‐{CMeN(2,6‐(4‐FC₆H₄)₂CH)₂–4‐t‐BuC₆H₂}₂C₅H₃N]CoCl₂ (Co6) is also reported. All cobaltous complexes are paramagnetic and have been characterized by ¹H/¹⁹F NMR spectroscopy, FT‐IR spectroscopy and elemental analysis. The molecular structures of Co3 and Co6 highlight the different degrees of steric protection given to the metal center by the particular N‐aryl group combination. Depending on the aluminoxane co‐catalyst employed to activate the cobalt precatalyst, distinct variations in thermal stability and activity of the catalyst towards ethylene polymerization were exhibited. In particular with MAO, the resultant catalysts reached their optimal performance at 70 °C delivering high activities of up to 10.1 × 10⁶ g PE (mol of Co)^?1 h^?1 with Co1  >  Co4  >  Co2  >  Co5  >  Co3 >>  Co6 . On the other hand, using MMAO, the catalysts operate most effectively at 30 °C but are by comparison less productive. In general, the polyethylenes were highly linear, narrowly disperse and displayed a wide range of molecular weights [M_w range: 18.5–58.7 kg mol^?1 (MAO); 206.1–352.5 kg mol^?1 (MMAO)].     

Chromium complexes based on thiophene–imine ligands for ethylene oligomerization

A new set of Cr(III) complexes, {L}CrCl₃(THF), based on thiophene–imine ( 2a , L = PhOC₆H₄(N═CH)‐2‐SC₄H₃; 2b , L = PhOC₂H₄(N═CH)‐2‐SC₄H₃; 2c , L = Ph(NH)C₂H₄(N═CH)‐2‐SC₄H₃; 2d , L = PhOC₆H₄(N═CH)‐2‐SC₄H₂‐5‐Ph; 2e , L = Ph(NH)C₂H₄(N═CH)‐2‐SC₄H₂‐5‐Ph) have been prepared and characterized using elemental analysis and infrared spectroscopy. Upon activation with methylaluminoxane, all the chromium complexes generated active systems affording a nonselective distribution of α‐olefins with turnover frequencies in the range 9500–93 500 (mol ethylene) (mol Cr)^?1 h^?1, and producing mostly oligomers (95.0–99.3 wt% of total products). Small amounts of polymer were produced in these oligomerization reactions (0.8–8.2 wt%). The catalytic activities were quite sensitive to the ligand environment. Moreover, the effects of oligomerization parameters (temperature, [Al]/[Cr] molar ratio, time) on the activity and on the product distribution were examined.     

Rapid separation of post‐blast explosive residues on glass electrophoresis microchips

This study describes the development of an analytical methodology based on the use of microchip electrophoresis (ME) devices integrated with capacitively coupled contactless conductivity detection (C⁴D) for the separation and detection of inorganic anions in post‐blast explosive residues. The best separation condition was achieved using a running buffer composed of 35 mmol/L lactic acid, 10 mmol/L histidine and 0.070 mmol/L cetyl(trimethyl ammonium) bromide. For C⁴D measurements, the highest sensitivity was obtained applying a 700 kHz sinusoidal wave with excitation voltage of 20 V_pp. The separation of Cl^?, NO₃^?, NO₂^?, SO₄^2?, ClO₄^? and ClO₃^? was performed within ca. 150 s with baseline resolution and efficiencies between 4.4 × 10⁴ and 1.7 × 10⁵ plates/m. The found limits of detection ranged between 2.5 and 9.5 μmol/L. Last, real samples of post‐blast explosive residues were analyzed on the ME‐C⁴D devices obtaining successfully the determination of Cl^?, NO₃^? and SO₄^2?. The achieved concentration values varied between 12.8–72.5 mg/L for Cl^?, 1.7–293.1 mg/L for NO₃^? and 1.3–201.3 mg/L for SO₄^2?. The data obtained using ME‐C⁴D devices were in good agreement with the concentrations found by ion chromatography. The approach reported herein has provided short analysis time, instrumental simplicity, good analytical performance and low cost. Furthermore, the ME‐C⁴D devices emerge as a powerful and portable analytical platform for on‐site analysis demonstrating to be a promising tool for the crime scene investigation.     

Improved photocatalytic performance of anatase TiO2 synthesized through ethanol supercritical drying technique

Anatase titania (TiO₂) nanoparticles were synthesized via a self‐developed ethanol vapor‐thermal method at 240°C (T240) and 250°C (T250), i.e. at temperatures lower and higher, respectively, than the supercritical temperature (243.5°C, 7.0 MPa) of ethanol. Compared to T240, T250 exhibited a higher ratio of exposed (001) facets, oxygen vacancies, and concomitant TiO_x. The specific surface area of T250 was 119.0 m² g^?1, smaller than that of T240 (144.2 m² g^?1). During the degradation of methylene blue, T250 exhibited a high apparent rate constant (K_app) of 14.5 × 10^?2 min^?1, which was 6.3 times larger than that for T240. Furthermore, compared to T240, T250 exhibited better performance toward degradation of phenol. Results of electron spin resonance spectroscopy and photoluminescence indicated that the photogenerated electron–hole pairs possessed higher separation efficiency for T250 than for T240. In summary, the excellent photocatalytic performance of T250 originates from the higher ratios of exposed (001) facets, oxygen vacancies or TiO_x, C═O groups adsorbed at the surface of particles, and higher separation efficiency of photogenerated electron–hole pairs. By employing this self‐developed vapor‐thermal method, a variety of catalysts and their composites can be synthesized, which may exhibit novel morphological characteristics and properties as well as excellent photocatalytic performance.     

Synthesis and kinetic study on the thermal degradation of triblock copolymer of polycaprolactone‐poly (glycidyl nitrate)‐polycaprolactone (PCL‐PGN‐PCL) as an energetic binder

In this study, an energetic binder is synthesized via ring opening copolymerization of ε‐caprolactone with poly (glycidyl nitrate) (PGN) of low molecular weight (M_n = 1350 g mol^?1) as a macroinitiator to form triblock copolymer polycaprolactone‐PGN‐polycaprolactone (PCL‐PGN‐PCL) (M_n = 4128 g mol^?1). The effects of catalyst type and its concentration, reaction time, and solvent are investigated in this polymerization reaction. The resulting triblock copolymer is characterized by Fourier transform infrared spectroscopy (FT‐IR), nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA). The DSC result shows that the glass transition temperature of triblock copolymer (T_g = ?50°C) is lower than PGN (T_g = ?35°C). Also, the decomposition kinetics of this energetic binder is studied by DSC, TGA, and its derivative (DTG). An advanced isoconversional method is applied for kinetic analysis. Activation energy is calculated by Flynn‐Wall‐Ozawa (FWO) and Kissinger methods. The resulting activation energy from Kissinger method for the first and the second steps are 42.98 and 74.56 kJ mol^?1, respectively. Also, it is found from FWO results that the activation energy for the copolymer increases with degradation degree (α).     

Triazole‐based ligands functionalized silica: Effects of ligand denticity and donors on catalytic oxidation activity of Pd nanoparticles

Triazole‐based ligands, tris (triazolyl)methanol (Htbtm), bis (triazolyl)‐phenylmethanol (Hbtm), and phenyl (pyridin‐2‐yl)(triazolyl)methanol (Hpytm), with differences in ligand denticity (i.e., bidentate and tridentate) and type of N donors (i.e., triazole and pyridine) were functionalized onto a silica support to produce the corresponding SiO₂‐ L ( L  = tbtm, btm, pytm). Subsequent reactions with Pd (CH₃COO)₂ in CH₂Cl₂ yielded Pd/SiO₂‐ L . ICP‐MS reveals that Pd loadings are higher with increased N loadings, resulting in the following trend: Pd/SiO₂‐tbtm (0.83 mmol Pd g^?1) > Pd/SiO₂‐btm (0.65 mmol Pd g^?1) ~ Pd/SiO₂‐pytm (0.63 mmol Pd g^?1). Meanwhile, TEM images of the used Pd/SiO₂‐ L catalysts after the first catalytic cycle show that the mean size of Pd NPs is highest with Pd/SiO₂‐pytm (8.5 ± 1.5 nm), followed by Pd/SiO₂‐tbtm (6.4 ± 1.6 nm) and Pd/SiO₂‐btm (4.8 ± 1.3 nm). Based on TONs, catalytic studies toward aerobic oxidation of benzyl alcohol to benzaldehyde at 60 °C in EtOH showed that Pd/SiO₂‐pytm possessed the most active surface Pd(0) atoms, most likely as a result of more labile properties of the pyridine–triazole ligand compared to tris‐ and bis (triazolyl) analogs. ICP‐MS and TEM analysis of Pd/SiO₂‐btm indicate minimal Pd leaching and similar average Pd NPs sizes after 1^st and 5^th catalytic runs, respectively, confirming that SiO₂‐btm is an efficient Pd NPs stabilizer. The Pd/SiO₂‐btm catalyst was also active toward aerobic oxidation of various benzyl alcohol derivatives in EtOH and could be reused for at least 7 reaction cycles without a significant activity loss.