氮掺杂碳纳米管高负载金属催化剂在铝空气电池中的应用

在铁基催化剂(Fe-N-C)中引入金属铈,采用高温热解法合成了氮掺杂碳纳米管(NCNTs)高负载金属催化剂(Fe/Ce-NCNTs)。金属铈的引入能更好地促进碳纳米管(CNTs)的生长,锚定更多的铁原子,增加Fe—NX活性位点的数量。Fe/CeNCNTs催化剂在碱性介质中表现出良好的催化活性和稳定性,半波电位为0.86 V(vs RHE)。将Fe/Ce-NCNTs催化剂应用于铝空气电池(AABs),其峰值功率密度可达142 mW·cm^-2,在50 mA·cm^-2电流密度下放电比容量达到865 mAh·g^-1,在高电流密度负载下具有较高的电压。     

Co金属有机骨架模板制备NiCo水滑石/泡沫镍复合材料及电容性能

通过两步法先在泡沫镍(nickel foam,NF)上原位生长Co金属有机骨架(Co metal-organic framework,Co-MOF)纳米片阵列,再浸入不同浓度Ni²⁺离子溶液刻蚀Co-MOF纳米片,在NF表面得到NiCo水滑石(NiCo layered double hydroxide,NiCo-LDH)。NiCo-LDH/NF继承了Co-MOF纳米片结构形成一级纳米片阵列,并在一级纳米片表面形成次级纳米片褶皱。在2 mmol Ni(NO₃)₂·6H₂O溶液中刻蚀得到的NiCo-LDH/NF表现出高容量、高倍率性能,在电流密度为5 mA·cm^-2时比电容为7 764.5 mF·cm^-2,电流密度为20 mA·cm^-2时比电容为6 098.2 mF·cm^-2,容量保持率为78.5%,在20 A·g^-1电流密度下经过5 000次长循环后,容量保持率为85.9%。与活性炭组装的混合电容器达到38.9 Wh·kg^-1的最大能量密度和8 000.0 W·kg^-1的最大功率密度。     

氮掺杂有序介孔碳-Ni纳米复合材料的制备及电化学性能

以F₁₂₇为模板剂,NiCl₂为镍源,尿素为氮源,间苯二酚甲醛原位聚合树脂为碳源,分别采用均相法和两相法制备Ni-N-OMC-1,Ni-N-OMC-2纳米复合材料.X射线衍射(XRD)、激光拉曼以及透射电子显微镜(TEM)等测试结果表明,复合材料具有有序介孔结构,Ni以金属微粒形式嵌于碳骨架中,提高了有序介孔碳的石墨化程度.X射线光电子能谱测试(XPS)表明尿素热解后以4种形式存在:sp³杂化与C结合的N原子,吡啶N原子,sp²杂化与C结合的N原子以及quaternary-N原子.Ni-N的共改性改变了碳载体的理化性质,有利于Pt纳米粒子的负载与分散.均相法制备的Ni-N-OMC-1复合材料微波负载Pt后,氧还原极限电流密度为5.32mA·cm^-2,氢氧化电化学活性面积高达138.53m²·g^-1,电化学催化活性优于商业20%Pt/C材料(4.49mA·cm^-2,96.98m²·g^-1).     

α-Ti(HPO4)2微球负载型催化剂的合成及其烯烃聚合催化性能

2种茂金属催化剂及1种后过渡金属催化剂分别被固载于经过甲基铝氧烷处理后的α-Ti（HPO₄）₂微球表面,制备得到3种微球负载型催化剂。在烯烃聚合反应过程中,3种负载型催化剂均表现出比硅胶负载型催化剂更高的催化活性。2种茂金属负载型催化剂在乙烯、丙烯聚合反应中的活性分别高达6.8×10⁷ g_PE·（mol_Zr·h）^-1和5.0×10⁷ g_PP·（mol_Zr·h）^-1,所产生的烯烃聚合产物分子量分布较窄（M_w/M_n<2.3）,表现出良好的单中心催化特性,而且丙烯聚合产物的等规度高达96.5%。负载型后过渡金属催化剂在乙烯聚合反应中的活性稍低,但也能够达到8.3×10⁶ g_PE·（mol_Fe·h）^-1。3种负载型催化剂催化烯烃聚合产物均成微球型,能够很好地复制载体的形貌。     

钴铁双金属氧化物多孔纳米棒的制备及其电解水析氧性能

通过简单的钴铁前躯体热分解法制备了系列一维Co_1-xFe_xO_y（0≤x≤1）多孔纳米材料,并在1 mol·L^-1 KOH溶液中研究了其电解水析氧催化性能。研究发现不同Fe掺杂量对材料的结构与电解水析氧催化性能有较大的影响,其中16%（n/n）Fe掺杂量的Co_1-xFe_xO_y具有最优的析氧催化性能。在10 mA·cm^-2电流密度下其析氧过电位为345 mV,塔菲尔斜率为54 mV·dec^-1,并表现出优异的析氧稳定性能。廉价、高效的Co_1-xFe_xO_y多孔纳米棒材料有望成为优良的析氧催化剂用于电解水制氢。     

α-Ti(HPO4)2微球负载型催化剂的合成及其烯烃聚合催化性能

2种茂金属催化剂及1种后过渡金属催化剂分别被固载于经过甲基铝氧烷处理后的α-Ti（HPO₄）₂微球表面,制备得到3种微球负载型催化剂。在烯烃聚合反应过程中,3种负载型催化剂均表现出比硅胶负载型催化剂更高的催化活性。2种茂金属负载型催化剂在乙烯、丙烯聚合反应中的活性分别高达6.8×10⁷ g_PE·（mol_Zr·h）^-1和5.0×10⁷ g_PP·（mol_Zr·h）^-1,所产生的烯烃聚合产物分子量分布较窄（M_w/M_n<2.3）,表现出良好的单中心催化特性,而且丙烯聚合产物的等规度高达96.5%。负载型后过渡金属催化剂在乙烯聚合反应中的活性稍低,但也能够达到8.3×10⁶ g_PE·（mol_Fe·h）^-1。3种负载型催化剂催化烯烃聚合产物均成微球型,能够很好地复制载体的形貌。     

含硫、氮Schiff碱配合物—二水二分之一二甲基亚砜醋酸四邻香草醛缩胺基硫脲合镉(Ⅱ)的合成及晶体结构

X射线单晶衍射结果表明,三核镉配合物Cd₃[CH₃O(O)C₆H₃CH=NNHC(S)NH₂]4·[CH₃COO]₂·1/2[CH₃S(O)CH₃]·2H₂O为单斜晶系,空间群为C2/c,a=3.4214(4),b=1.1581(2),c=1.7932(5)nm,β=119.76(1)°,V=6.168nm³,Mr=1427.43,Z=4,D_c=1.54g/cm³,μ=12.48cm^-1,F(000)=2860,最后偏离因子R=0.066.     

碳纳米管负载的Pd-Ag-Sn催化剂对甲酸的电氧化

采用硼氢化钠还原的方法合成了碳纳米管负载的钯基纳米催化剂（Pd/CNT,Pd₇Ag₃/CNT,Pd₇Sn₂/CNT,Pd₇Ag₁Sn₂/CNT,Pd₇Ag₂Sn₂/CNT和Pd₇Ag₃Sn₂/CNT）。通过XRD,TEM和XPS对其进行了表征,结果表明,相比Pd/CNT和Pd-Ag（或Pd-Sn）催化剂的纳米颗粒,Pd-Ag-Sn催化剂展现出了更小的平均颗粒尺寸（2.3 nm）。此外,还通过循环伏安（CV）和计时电流法（CA）测试了这些催化剂对甲酸氧化的电活性,在酸碱介质中,Pd-Ag-Sn/CNT对甲酸氧化都表现出了更高的电流密度。其中,Pd₇Ag₂Sn₂/CNT催化剂在酸碱介质中的电流密度分别是108.8和211.3 mA·cm^-2,相应的Pd质量电流密度高达1 364和2 640 mA·mg^-1,远远高于商业Pd/C,表明Pd-Ag-Sn/CNT催化剂对甲酸氧化表现出了极好的电催化活性。     

三(3,5-二甲基苄基)氯化锡和四(间氰基苄基)锡的合成、晶体结构和量子化学研究

以3,5-二甲基苄基氯和间氰基苄基氯在适当的溶剂中与锡粉反应,合成了三(3,5-二甲基苄基)氯化锡(1)和四(间氰基苄基)锡(2),经X射线衍射方法测定了化合物的晶体结构。化合物1属单斜晶系,空间群为P2₁/m,晶体学参数:a=0.584 03(4) nm,b=1.966 37(14) nm,c=0.856 46 (5) nm, β=95.138(3), V=0.979 62(11) nm³,Z=2,D_c=1.735 g·cm^-3,μ(Mo Kα)=14.53 cm^-1,F(000)=524,R₁=0.043 7,wR₂=0.1232。化合物2属单斜晶系,空间群为C2/c,晶体学参数:a=1.692 21(12) nm,b=1.167 41(8) nm,c= 1.539 41(11) nm,β=116.615(10)°,V=2.718 9(3) nm³,Z=4,D_c=1.424 g·cm^-3,μ(Mo Kα)=9.67cm^-1,F(000)=1 176,R₁=0.017 5,wR₂=0.046 1;中心锡原子为畸变四面体构型。对其结构进行量子化学从头计算,探讨了配合物的稳定性、分子轨道能量以及部分前沿分子轨道的组成特征。     

氰根桥联FeⅢ-CuⅡ一维配合物{[Fe(1-CH3im)(CN)4(μ-CN)Cu(cyclam)]·H2O}n的合成、结构及磁性研究

基于构筑单元K₂[Fe(1-CH₃im)(CN)₅] 和[Cu(cyclam)] (ClO₄)₂, 合成了一个氰根桥联Fe^Ⅲ-Cu^Ⅱ中性一维化合物{[Fe(1-CH₃im)(CN)₄(μ-CN)Cu(cyclam)] ·H₂O}_n(1-CH₃im=1-甲基咪唑;cyclam=1, 4, 8, 11-四氮杂环十四烷) (1), 并通过X-射线单晶分析表征其结构 特征。结果表明:化合物(1)是由氰根桥联的杂金属组成的聚合物, 其结构属于三斜晶系, P1空间群, a=0.832 56(17) nm, b= 0.899 38(18) nm, c=0.998 3(2) nm, α=111.94(3)°, β=95.06(3)°, γ=116.90(3)°, V=0.587 7(2) nm³, Z=1, D_c=1.554 g·cm^-3, μ=1.558 mm^-1, F(000)=286, R₁=0.051 9, wR₂=0.135 3。磁性研究表明:配合物1中Cu^Ⅱ和低自旋的Fe^Ⅲ离子之间存在弱的铁磁耦合作用。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.