Polypyrrole/poly(N‐isopropylacrylamide‐co‐acrylic acid) thermosensitive and electrically conductive composite microgels

The electrically conductive polypyrrole/dodecylbenzene sulfonic acid/poly(N‐isopropylacrylamide‐co‐acrylic acid) (PPy/DBSA/poly(NIPAAm‐co‐AA)) composite microgels were synthesized by a chemical oxidation of pyrrole in the presence of DBSA as the primary dopant, and poly(NIPAAm‐co‐AA) microgels as the polymeric codopant and template, in which APS was used as the oxidant. It was proposed to prepare “intelligent” polymer microgel particles containing both thermosensitive and electrically conducting properties. The polymerization of pyrrole took place directly inside the microgel networks, leading to formation of composite microgels and the morphology was observed by transmission electron microscope. PPy particles interacted strongly with microgels, as the acid groups of microgels acted as the polymeric codopant. The composite microgels thus formed showed electrically conducting behavior dependent on humidity and temperature. At temperatures lower than lower critical solution temperature, the conductivity decreased with increasing the humidity and a small hysteresis phenomenon was observed. The hysteresis became indistinct when temperature was near volume phase transition temperature. However, after the treatment of high temperature and high humidity, the conductivity increased surprisingly due to the structure reorganization inside the composite microgels. The distinctive functionality of the PPy composite microgels was expected to be utilized in many attractive applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1648–1659, 2006     

N‐vinylcaprolactam‐based microgels: Synthesis and characterization

Poly(N‐vinylcaprolactam) (PVCL) is well known for its thermoresponsive behavior in aqueous solutions. PVCL combines useful and important properties; it is biocompatible polymer with the phase transition in the region of physiological temperature (32–38 °C). This combination of properties allows consideration of PVCL as a material for design biomedical devices and use in drug delivery systems. In this work, PVCL based temperature‐sensitive crosslinked particles (microgels) were synthesized in a batch reactor to analyze the effect of the crosslinker, initiator, surfactant, temperature, and VCL concentration on polymerization process and final microgels characteristics. The mean particle diameters at different temperatures and the volume phase‐transition temperature of the final product were analyzed. To obtain information about the inner structure of microgel particles, semicontinuous polymerizations were carried out and the evolution of the hydrodynamic average particle diameters at different temperatures of the microgel synthesized was investigated. In the case of microgel particles obtained in a batch reactor the size and the swelling‐de‐swelling behavior as a function of the temperature of the medium can be tuned by modulating the reaction variables. When the microgel particles were synthesized in a semibatch reactor different swelling‐de‐swelling behaviors were observed depending on particles inner structure. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2510–2524, 2008     

Zwitterionic microgel based anti(-bio)fouling smart membranes for tunable water filtration and molecular separation

Tunable gating polymeric nanostructured membrane with excellent water permeability and precise molecular separation is highly advantageous for smart nanofiltration application. Polymeric nanostructures such as microgels with functionalizable cross-linkable moieties can be an excellent choice to construct membranes with a thin separation layer, functionality, and tunable transport properties. In the present work, we prepared switchable anti(bio)fouling membranes using zwitterionically functionalized antibacterial thermoresponsive aqueous core-shell microgels with a thin separation layer for controlled filtration and separation applications. The microgels were synthesized using a one-step graft copolymerization of poly(N-isopropylacrylamide) and polyethyleneimine (PEI) followed by zwitterionization of free amine groups of PEI chains with 1,3-propane sultone. Microgel synthesis and zwitterionization were confirmed by spectroscopic and elemntal analysis. The obtained microgels were thoroughly characterized to analyze their thermoresponsive behavior, morphology, charge, and antibacterial properties. After that, characterizations were performed to elucidate the surface properties, water permeation, rejection, and flux recovery of the microgel membranes prepared by suction filtration over a track-etched support. It was observed that zwitterionic membrane provides better hydrophilicity, lower bovine serum albumin (BSA) adsorption, and desirable antimicrobial activity. The pure water permeability was directly related to the microgel layer thickness, applied pressure, and temperature of the feed solution. The novel nanostructured membrane leads to an excellent water permeance with a high gating ratio, high flux recovery rate with low irreversible fouling, better rejection for various dyes, and foulant. Most importantly, the long-term performance of the membrane is appreciable as the microgel layer remains intact and provides excellent separation up to a longer period. Owing to easy preparation and well control over thickness, the zwitterionic microgel membranes constitute unique and interactive membranes for various pressure-driven separation and purification applications.     

Dynamic control of volume phase transitions of poly(N‐isopropylacrylamide) based microgels in water using hydrazide‐aldehyde chemistry

We demonstrate that the volume phase transition temperature (VPTT) of copolymer microgel particles made from N‐isopropylacrylamide (NIPAm) and methacryloyl hydrazide (MH) can be tailored in a reversible manner upon the reaction of the hydrazide functional groups with aldehydes. The microgels were synthesized by precipitation polymerization in water. Due to the water‐soluble nature of the MH monomer, the VPTT at which the microgel particles contract shifts to higher values by increasing the incorporated amounts of methacryloyl hydrazide from 0 to 5.0 mol %. The VPTT of the copolymer microgel dispersions in water can be fine‐tuned upon addition of hydrophobic/hydrophilic aldehydes, which react with the hydrazide moiety to produce the hydrazone analogue. This hydrazone formation is reversible, which allows for flexible, dynamic control of the thermo‐responsive behavior of the microgels. The ability to “switch” the VPTT was demonstrated by exposing hydrophilic streptomycin sulfate salt incubated microgel particles to an excess of a hydrophobic aldehyde, that is benzaldehyde. The temperature at which these microgels contracted in size upon heating was markedly lowered in these aldehyde exchange experiments. Transformation into benzaldehyde hydrazone derivatives led to assembly of the microgel particles into small colloidal clusters at elevated temperatures. This control of supracolloidal cluster formation was also demonstrated with polystyrene particles which had a hydrazide functionalised microgel shell. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1745–1754     

Non‐Thermoresponsive Decanano‐sized Domains in Thermoresponsive Hydrogel Microspheres Revealed by Temperature‐Controlled High‐Speed Atomic Force Microscopy

Despite the tremendous efforts devoted to the structural analysis of hydrogel microspheres (microgels), many details of their structures remain unclear. Reported in this study is that thermoresponsive poly(N‐isopropyl acrylamide) (pNIPAm)‐based microgels exhibit not only the widely accepted core–shell structures, but also inhomogeneous decanano‐sized non‐thermoresponsive spherical domains within their dense cores, which was revealed by temperature‐controlled high‐speed atomic force microscopy (TC‐HS‐AFM). Based on a series of experiments, it is concluded that the non‐thermoresponsive domains are characteristic for pNIPAm microgels synthesized by precipitation polymerization, and plausible structures for microgels prepared by other polymerization techniques are proposed.     

Application of photopolymer to core‐hair type microgels with various hair length

The new microgels, called “core‐hair” type microgels, were synthesized. They have a hair moiety consisting of the oxyhexano‐1,7‐diyl (? O? (CH₂)₅? C(O)? ) group as a spacer and the acryloyl group for polymerization. The hair length depends on the number of spacer units, and affects the viscosity and the thixotropy index of the microgel. These core‐hair microgels show the pseudo‐plastic flow of a non‐Newtonian fluid with moderate to high dispersibility in water or alcoholic solvents. Due ­to their viscosities and dispersibilities, these core‐hair microgels are useful for photopolymer, e.g. for screen printing. Therefore, these microgels were actually applied to screen printing and confirmed pattern forming on a screen printing plate through water development. We now discuss the relation between the viscosity, the dispersibility, the photosensitivity, and the rate of photopolymerization to the hair length of the microgel. Copyright © 2001 John Wiley & Sons, Ltd.     

Influence of poly(N‐isopropylacrylamide) and poly(N,N′‐diethyl acrylamide) coatings on polysulfone/polyacrylonitrile‐based membranes for protein separation

Herein we describe the design and the assembly of temperature sensitive polysulfone (PS)/polyacrylonitrile (PAN) blend membranes using supercritical fluid technology. Blended membranes were prepared using the CO₂‐assisted phase inversion method, and their pores were coated with two thermoresponsive hydrogels‐poly(N‐isopropylacrylamide) (PNIPAAm) and poly(N,N′‐diethylacrylamide) (PDEAAm). Permeation experiments of bovine serum albumin (BSA) and lysozyme (LYS) solutions were used to evaluate the performance and temperature‐responsive behavior of coated membranes. While membranes coated with PNIPAAm presented similar protein permeation profiles at temperatures below and above its lower critical solution temperature, PDEAAm coating imparted a temperature‐responsive behavior to PS/PAN (90:10) membranes and selective permeation of proteins with different sizes. Copyright © 2011 John Wiley & Sons, Ltd.     

Dual stimuli‐responsive microgels based on photolabile crosslinker: Temperature sensitivity and light‐induced degradation

The synthesis and characterization of a new photocleavable crosslinker is presented here. Dual stimuli‐responsive P(VCL‐co‐NHMA) microgels were prepared by precipitation polymerization of vinylcaprolactam (VCL) with N‐hydroxymethyl acrylamide (NHMA) and the new crosslinker. The microgels had distinct temperature sensitivity as observed in the case of PVCL‐based particles and their volume phase transition temperature (VPTT) shifted to higher temperature with increasing NHMA content. Photolytic degradation experiments were investigated by irradiation with UV light, which led to microgel disintegration caused by cleavage of the photolabile crosslinking points. The degradation behavior of the microgels was conducted with respect to degradation rates by means of the relative turbidity changes. Hence, the microgels could totally degrade into short linear polymers by UV light, thus representing a great potential as new light and temperature dual responsive nanoscale materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1676–1685     

Decoupled Thermo‐ and pH‐Responsive Hydrogel Microspheres Cross‐Linked by Rotaxane Networks

Rotaxane cross‐linked (RC) microgels that exhibit a decoupled thermo‐ and pH‐responsive volume transition were developed. The pH‐induced changes of the aggregation/disaggregation states of cyclodextrin in the RC networks were used to control the swelling capacity of the entire microgels. Different from conventional thermo‐ and pH‐responsive microgels, which are usually obtained from copolymerizations involving charged monomers, the RC microgels respond to temperature as intended, even in the presence of charged functional molecules such as dyes in the microgel dispersion. The results of this study should lead to new applications, including drug delivery systems that require a retention of their smart functions even in environments that may contain foreign ions, for example, in in vivo experiments.     

Poly (N-isopropylacrylamide) microgel based assemblies for organic dye removal from water: microgel diameter effects

Poly (N-isopropylacrylamide)-co-acrylic acid (pNIPAm-co-AAc) microgel based assemblies (aggregates) were synthesized from microgels of various diameters via polymerization of the crosslinker N,N′-methylenebisacrylamide (BIS) in the presence of microgels in solution. We investigated the ability of the respective aggregates to remove the organic, azo dye molecule 4-(2-hydroxy-1-napthylazo) benzenesulfonic acid sodium salt (Orange II) from water at both room and elevated temperatures. The results from the microgel aggregates made from 1.1-μm-diameter [Parasuraman and Serpe. ACS Applied Materials & Interfaces, 2011] microgels were compared to aggregates synthesized from 321-nm and 1.43-μm-diameter microgels. Aggregates made from the same size microgels showed increased uptake efficiency as the concentration of BIS in the aggregates was increased, while for a given BIS concentration, the uptake efficiency increased with increasing microgel size in the aggregate. We attribute this to the “nature” of the aggregates; aggregates have void space between the microgels that can serve as reservoirs for Orange II uptake—the void spaces are hypothesized to increase with larger diameter microgels. By exploiting the thermoresponsive nature of the microgels, and microgel based aggregates, 85.3 % removal efficiencies can be achieved. Finally, all uptake trends for the aggregates, at room temperature, were fit with a Langmuir sorption isotherm model.     

Amino acid‐derived Poly(L‐Lysine) (p(LL)) microgel as a versatile biomaterial: Hydrolytically degradable,drug carrying,chemically modifiable and antimicrobial material

Here, a microgel of poly(_L‐Lysine) (p(LL)) from an amino acid, _L‐Lysine, was synthesized by microemulsion technique using AOT as surfactant in gasoline. The prepared p(LL) microgel was shown to be hydrolytically degradable at pH values of 5.4, 7.4, and 9 in phosphate buffer solution (PBS). The protonated p(LL) microgel was loaded with model drugs such as naproxen and riboflavin and found to release about 80% of loaded naproxen in 180 minutes and 70% of loaded riboflavin in about 120 minutes suggesting the potential of p(LL) microgels to act as fast drug delivery vehicles. Furthermore, p(LL) microgels were chemically modified with 1‐bromoethane (BE), 1‐bromooctane (BO), and 1‐bromoethylamine (BEA) to render antimicrobial capabilities. It was found that protonated p(LL) microgels had 29 ± 1 mm inhibition zone diameter for Pseudomonas aeruginosa ATCC 10145. Furthermore, minimum inhibition concentration (MIC) and minimum bactericidal concentration (MBC) values for Staphylococcus aureus ATCC 6538 were also calculated as 1 and 2.5 mg/mL concentrations, respectively, for protonated p(LL) microgels.     

Assembly of Preformed Gold Nanoparticles onto Thermoresponsive Poly(N‐isopropylacrylamide)‐Based Microgels on the Basis of Au‐thiol Chemistry

The assembly of preformed gold nanoparticles (AuNPs ) onto the thermoresponsive poly(N ‐isopropylacrylamide) (PNIPAM )‐based microgels was achieved on the basis of the driving force of Au‐thiol chemistry. The loading amount of AuNPs can be controlled by varying the ratio of AuNPs relative to PNIPAM ‐based microgels. The as‐prepared PNIPAM /Au hybrid microgels showed well‐defined reversible swelling/deswelling transition in response to temperature, which can be employed to tune the plasmonic property of hybrid microgels. As the temperature was increased, the position of localized surface plasmon resonance (LSPR ) band red‐shifted to some extent mainly due to the increase in the local refractive index around AuNPs .     

Reversible Assembly of Microgels by Metallo‐Supramolecular Chemistry

The combination of supramolecular chemistry and soft colloids as microgels represents an ambitious way to develop multi‐versatile colloidal assemblies. Hereafter, terpyridine‐functionalized poly(N‐isopropylacrylamide) (PNiPAM) microgel building blocks are shown to undergo an assemble–freeze–disassemble process. The microgel assemblies, which are controlled by monitoring the attractive and repulsive potentials between the soft colloidal particles, are then frozen by forming inter‐particle metal–terpyridine bis‐complexes upon addition of the metallic cation (such as Fe^II, Co^II). By oxidation of the metal–terpyridine bis‐complex links, the aggregates open up, which is due to the complex dissociation releasing the connected particles in the form of single microgels. We extended our work to the development of 1D filaments and 2D membranes materials made of soft particles connected via supramolecular chemistry.     

Preparation and characterization of pH‐responsive and thermoresponsive hybrid microgel particles with gold nanorods

We report on pH‐responsive and thermoresponsive hybrid materials based on the assembly of gold nanorods, Au NRs, into multiresponsive, crosslinked copolymer microgel particles. These microgel particles were prepared by the surfactant‐free emulsion polymerization of N‐isopropylacrylamide and acrylic acid using N, N′‐methylene bis‐acrylamide as a crosslinker, which produces particles measuring approximately 160 nm that are interconnected to one other. Cetyltrimethyl ammonium bromide‐stabilized Au NRs were also prepared independently using a seed‐mediated growth method and then loaded into swollen, deprotonated, acrylic acid‐containing microgel particles using the electrostatic interactions between the oppositely charged particles. Transmission electron micrographs of the as‐prepared hybrid Au NR–microgel particles confirmed that the Au NRs were attached to the surface of the microgel particles. The size‐dependent temperature‐responsive characteristics of the hybrid microgel particles were studied by dynamic light scattering, and it was found that as the temperature increased across the phase transition temperature, the particle size decreased to 56% of the original volume. The thermoresponsive and pH‐responsive optical properties of the hybrid microgel particles were also systematically investigated. The thermo‐ and pH‐induced shrinkage of the microgel led to an increase in the UV–vis absorption intensity and caused a significant blue shift in the longitudinal surface plasmon bands of the Au NRs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and self‐assembly of thermoresponsive poly(N‐isopropylacrylamide)‐b‐poly(oligo ethylene glycol methyl ether acrylate) double hydrophilic block copolymers

We report on the synthesis of novel poly(N‐isopropylacrylamide)‐b‐poly(oligo ethylene glycol methyl ether acrylate) (PNIPAM‐b‐POEGA) thermoresponsive block copolymers using reversible addition–fragmentation chain transfer polymerization methodologies. The synthesized block copolymers are characterized by gel permeation chromatography, nuclear magnetic resonance, Fourier transform infrared (FTIR) techniques in terms of molecular weight and composition. Their thermoresponsive self‐assembly in aqueous media is investigated using dynamic and static light scattering. The PNIPAM‐b‐POEGA thermoresponsive block copolymers formed aggregates in water by increasing the temperature above the lower critical solution temperature value of PNIPAM block. Solution pH seems to affect the self‐assembly behavior in some cases due to the presence of ? COOH end groups. Therefore, the copolymers were utilized as “smart” nanocarries for the hydrophobic drug indomethacin, implementing a novel encapsulation protocol taking advantage of the thermoresponsive character of the PNIPAM block. The empty and loaded self‐assembled nanocarriers systems were studied by light scattering techniques, ultraviolet–visible, and FTIR spectroscopy, which gave information on the size and structure of the nanocarriers, the drug loading content and the interactions between the drug and the components of the block copolymers. Drug loaded nanostructures show stability at room temperature, due to active drug/block copolymer interactions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1467–1477     

Water‐dispersible microgel modified with methacryloyl groups by ionic bonding on the surface and the photopolymer microgel

A novel water‐dispersible reactive microgel, which had a diameter of 40–90 nm, was synthesized for photopolymer materials. The microgels have segments with substituted ammonium groups, to provide water solubility, in their polymer networked structure. It has unsaturated groups connected to the quaternary nitrogens by ionic bonding (I‐type microgel). The I‐type microgel was compared with one that has methacryloyl groups connected with the quaternary nitrogens of the microgel by covalent bonding (C‐type microgel). The I‐type microgels were able to separately control the modified amount of quaternary nitrogen and methacryloyl group. In the presence of 2,4‐diethylthioxantone as a photoinitiator and pentaerthritol triacrylate as a crosslinker, the photopolymer containing the C‐type or I‐type microgels had sensitivity high enough for practical use. Not only the amount of the methacryloyl group of the microgel but the amount of the quaternary nitrogen affected the sensitivity and the rate of polymerization of the water‐dispersible photopolymer containing the I‐type microgels. Copyright © 2000 John Wiley & Sons, Ltd.     

Photo‐triggered microgel aggregation using o‐nitrobenzaldehyde as aggregating power source

In this work, cationic and anionic microgels which are mainly formed from thermal responsive polymer, poly(N‐isopropylacrylamide), are prepared and mixed in water. These microgels interact with each other due to the electrostatic interaction, and aggregate voluntarily. By applying the microgel aggregating system, photo‐responsive aggregating system is constructed by using o‐nitrobenzaldehyde (NBA), which reacts and releases hydrogen triggered by photo stimuli. The microgel aggregates in an aqueous solution of NBA re‐disperse depending on the irradiation time of UV light. In addition, by masking the UV irradiated area, the resultant shapes of microgel aggregates are controlled. The aggregated microgel shows rapid and drastic volume changes in response to heat. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1317‐1322     

N‐vinylcaprolactam‐based microgels for biomedical applications

Three types of poly(N‐vinylcaprolactam)‐based temperature‐sensitive microgel particles were synthesized by emulsion polymerization. The uptake of a model drug (calcein) into the particles was analyzed in terms of the amount of calcein absorbed and equilibrium–swelling degree. By incubating the microgels with primary neuronal cell cultures of embrionary rats, cell viability and biocompatibility tests were carried out. The results show that the driving force for the model drug to penetrate into the microgel particles is H‐bonding associations. On the other hand, cell death was microgel concentration and incubation period dependent. Microgels can be stored in a dried state and resuspended in water when necessary without changing their swelling–deswelling ability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1173–1181, 2010     

Tuning smart microgel swelling and responsive behavior through strong and weak polyelectrolyte pair assembly

The layer-by-layer (LbL) assembly of polyelectrolyte pairs on temperature and pH-sensitive cross-linked poly(N-isopropylacrylamide)-co-(methacrylic acid), poly(NIPAAm-co-MAA), microgels enabled a fine-tuning of the gel swelling and responsive behavior according to the mobility of the assembled polyelectrolyte (PE) pair and the composition of the outermost layer. Microbeads with well-defined morphology were initially prepared by synthesis in supercritical carbon dioxide. Upon LbL assembly of polyelectrolytes, interactions between the multilayers and the soft porous microgel led to differences in swelling and thermoresponsive behavior. For the weak PE pairs, namely poly(L-lysine)/poly(L-glutamic acid) and poly(allylamine hydrochloride)/poly(acrylic acid), polycation-terminated microgels were less swollen and more thermoresponsive than native microgel, whereas polyanion-terminated microgels were more swollen and not significantly responsive to temperature, in a quasi-reversible process with consecutive PE assembly. For the strong PE pair, poly(diallyldimethylammonium chloride)/poly(sodium styrene sulfonate), the differences among polycation and polyanion-terminated microgels are not sustained after the first PE bilayer due to extensive ionic cross-linking between the polyelectrolytes. The tendencies across the explored systems became less noteworthy in solutions with larger ionic strength due to overall charge shielding of the polyelectrolytes and microgel. ATR FT-IR studies correlated the swelling and responsive behavior after LbL assembly on the microgels with the extent of H-bonding and alternating charge distribution within the gel. Thus, the proposed LbL strategy may be a simple and flexible way to engineer smart microgels in terms of size, surface chemistry, overall charge and permeability.     

Highly regenerable ionic liquid microgels as inherently metal‐free green catalyst for H2 generation

Polymeric ionic liquid (PIL) microgel of poly([2‐(methacryloyloxy)ethyl]trimethylammonium chloride) (p(MTMA)) was synthesized by using an inverse suspension polymerization technique. The anion‐exchanged PIL microgels via chloride replacement from p(MTMA) were prepared as p(MTMA)‐potassium thiocyanate (p(MTMA)‐KSCN), p(MTMA)‐sodium tetrafluoroborate (p(MTMA)‐NaBF₄), and p(MTMA)‐sodium dicyanamide (p(MTMA)‐NaN(CN)₂) microgels by treatment with corresponding salts of potassium thiocyanate (KSCN), sodium tetrafluoroborate NaBF₄, and sodium dicyanamide NaN(CN)₂ in aqueous media. The prepared microgels were found to be efficient metal‐free catalysts, and their catalytic activity in H₂ production from the methanolysis of NaBH₄ was investigated. Moreover, various parameters affecting H₂ production such as the effect of microgel size, the concentration of NaBH₄, the effect of the anion in the microgel, the reusability of the microgel, and temperature were investigated. The Ea value calculated for the methanolysis reaction of NaBH₄ catalyzed by p(MTMA) microgels was found as 24.1 ± 0.7 kJ mol⁻¹ ranging from −15 to 45°C, and this Ea value is lower than some Ea values for the same reaction. Interestingly, 10‐time successive use of p(MTMA) microgel as catalyst in NaBH4 methanolysis reduced its catalytic activity to 49%, whereas the anion‐exchanged forms of p(MTMA) microgel, p(MTMA)‐KSCN, p(MTMA)‐NaBF₄, and p(MTMA)‐NaN(CN)₂ only reduced their catalytic activity to 89, 86, and 79%, respectively, after 10 consecutive uses. Therefore, these anion‐exchanged microgel catalysts are highly efficient in comparison with virgin p(MTMA) microgels for regenerable H₂ generation from the methanolysis of NaBH₄.