Synthesis and gas-sensing properties of phenylhydrazine-functionalized single wall carbon nanotubes in polymer matrix

Gas sensor material was prepared by encapsulation of functionalized single-walled carbon nanotubes (SWCNT) into a gas-permeable polymer poly(1-trimethylsilyl-1-propyne) (PTMSP). A phenylhydrazino group was used for the functionalization of SWCNTs to improve their solubility and compatibility with polymers. Syntheses were carried out in aqueous surfactant solutions and in pure phenylhydrazine without surfactant. Two different temperatures (24 and 50°C) and two surfactants (sodium dodecyl sulfate and tricaprylmethylammonium chloride — Aliquat®336) were compared. Functionalized SWCNTs were characterized by X-ray photoelectron (XPS), Raman and Fourier transform infrared (FTIR) spectroscopy. Analyses showed that the synthesis at higher temperature in pure phenylhydrazine resulted in the highest functionalization yield. Phenylhydrazine itself proved to be a good solvent for SWCNTs. The functionalized nanotubes were soluble in organic solvents that under the same conditions were appropriate solvents for polymers. The sensitivity of functionalized SWCNT-PTMSP thin film composite to NO₂ gas at room temperature was significantly higher than that of the similar sensor material containing the pristine SWCNTs.      

Synthesis, characterization and bioevaluation of irinotecan-collagen hybrid materials for biomedical applications as drug delivery systems in tumoral treatments

The purpose of the present study is the preparation and characterization of collagen/antitumor drug hybrids as drug delivery systems. Materials used for obtaining collagen-based drug delivery systems were collagen type I (Coll) as matrix and irinotecan (I) as hydrophilic active substances. After incorporation of I into Coll in differing ratios, the obtained hybrid materials (Coll/I) could be used according to our results as potential drug delivery systems in medicine for the topical (local) treatment of cancerous tissues or bone. The released amount of I varies with amount of Coll from hybrid materials: the higher, the slower the release amount of irinotecan transferred is in the first 6 hours. The in vitro citotoxicity demonstrates an antitumoral activity of the obtained hybrid materials and their potential use for biomedical applications as drug delivery systems in tumoral treatments.      

Azobenzene functionalized mesoporous AlMCM-41-type support for drug release applications

A light-responsive material, aminoazobenzene functionalized AlMCM-41, was synthesized and characterized in order to be used as carrier for drug delivery devices. The light-induced hydrophobic-hydrophilic switching effect of azobenzene functionalized aluminosilicate was exploited in the release of irinotecan, a cytostatic drug. To obtain the functionalized mesoporous support, an azobenzene-silane precursor was synthesized by coupling 4-(4′-aminophenylazo) benzoic acid with 3-aminopropyl triethoxysilane and further grafted on AlMCM-41. The azobenzene functionalized mesoporous aluminosilicate exhibited no significant toxicity towards murine fibroblast healthy cells and a reduced toxicity towards murine melanocyte cells. The hybrid materials obtained by loading irinotecan on AlMCM-41 (wt. 35.4%) and aminoazobenzene modified AlMCM-41 (wt. 22%), respectively were characterized by FTIR, small and wide angle XRD, N₂ adsorption-desorption isotherms and DSC analyses. A two-fold increase in the drug release rate from azobenzene functionalized aluminosilicate in phosphate buffer solution under UV irradiation was noticed, as compared with dark conditions. Moreover, the azobenzene functionalization of AlMCM-41 significantly increased the irinotecan delivery rate and total cumulative release in comparison with the pristine AlMCM-41 in similar conditions.

Open image in new window

     

Influence of point defects on the structural and electronic properties of SiC nanotubes

We have performed studies of the structural and electronic properties of functionalized single wall silicon carbide nanotubes (SW-SiCNTs) with chirality (5,5). Our first principles studies are done using density functional theory. The exchange-correlation energies are modeled according to the Hamprecht-Cohen-Tozer-Handy functional in the generalized gradient approximation (HCTH-GGA) and the DNP basis function with double polarization is applied. To determine the most stable geometry, we have applied the minimum energy criterion considering several initial configurations of the hydroxyl (OH) functional group interacting with the single wall SiCNT. In particular, we tested different orientations of the OH adsorbed on the nanotube surface (oriented towards the Si or C atoms) and at the end of the nanotube. Results indicate that the most favorable geometry corresponds to OH adsorption (chemisorption) at the end of the nanotube. The polarity increases yielding better conditions for solubility and dispersion. The work function of the SW-SiCNT-OH is reduced, which in turn favors conditions for field emission properties (FEPs). Finally, the presence of silicon or carbon mono-vacancies in the functionalized nanotubes suggests this may be a good structure to fabricate semiconductor devices      

Differential pulse adsorptive stripping voltammetric determination of methotrexate using a functionalized carbon nanotubes-modified glassy carbon electrode

A glassy carbon electrode (GC) containing multiwalled functionalized carbon nanotubes (MWCNTs) immobilized within a dihexadecylhydrogenphosphate film (DHP) is proposed as a nanostructured platform for determination of methotrexate (MTX) concentration (a drug used in cancer treatment) using differential pulse adsorptive stripping voltammetry (DPAdSV). The voltammograms for a MTX solution using MWCNTs-DHP/GC electrode presented an oxidation peak potential at 0.98 V vs. Ag/AgCl (3.0 mol L^?1 KCl) in a 0.1 mol L^?1 sulphuric acid. The apparent heterogeneous electron transfer rate constant of 0.46 s^?1 was calculated. The recovery area of 2.62×10^?9 mol cm² was also obtained. Under the optimal experimental conditions, the analytical curve was linear in the MTX concentration range from 5.0×10^?8 to 5.0×10^?6 mol L^?1, with a detection limit of 3.3×10^?8 mol L^?1. The MWCNTs-DHP/GC electrode can be easily prepared and was applied for the determination of MTX in pharmaceutical formulations, with results similar to those obtained using a high-performance liquid chromatography comparative method.      

The use of ultrasonic treatment for improvement of metrological performance of sorption atomic absorption determination of lead(II) and cadmium(II) traces

The optimal parameters for ultrasonic treatment (frequency 200–300 kHz, intensity 2–4 W cm^?2) were obtained to intensify Pb(II) and Cd(II) sorption concentration by carbon sorbent from apricot pit. The combined action of ultrasonic frequency of 18 kHz and 1 MHz on concentrate slurry increases its sedimentation stability from 3 to 180 minutes and decreases S_r value up to 7% at Pb(II), Cd(II) hybrid sorption atomic absorption determination in natural waters, brines, common salt.      

Polymer conjugates with potential biological activity based on new derivatives of 2-mercaptobenzoxazole-synthesis and characterization

New potentially biologically active compounds derived from 2-mercapto-benzoxazole were synthesized and coupled on polymeric support of poly (maleic anhydride-alt-vinyl acetate) for the preparation of polymer-drug conjugates with controlled drug release. All compounds were characterized by elemental and spectroscopy (FT-IR, ¹H-NMR) analysis. The toxicological tests recommend the products for further laboratory screening.      

Silica/lignosulfonate hybrid materials: Preparation and characterization

The research reported here concerns the synthesis, characterization and potential applications of silica/lignosulfonate hybrid materials. Three types of silica were used (Aerosil®200, Syloid®244 and hydrated silica), along with magnesium lignosulfonate. The effectiveness of the hybrid material synthesis methodology was confirmed indirectly, using Fourier transform infrared spectroscopy, elemental and colorimetric analysis. Dispersive-morphological analysis indicates that the products with the best properties were obtained using 10 parts by weight of magnesium lignosulfonate per 100 parts of Syloid®244 silica. The relatively high thermal stability recorded for the majority of the synthesized products indicates the potential use of this kind of a material as a polymer filler. Results indicating the high electrokinetic stability of the materials are also of great importance. Additionally, the very good porous structure properties indicate the potential use of silica/lignosulfonate systems as biosorbents of hazardous metal ions and harmful organic compounds.      

Susceptibility to hydrolysis of phenylboronic pinacol esters at physiological pH

Boronic acids and their esters are highly considered compounds for the design of new drugs and drug delivery devices, particularly as boron-carriers suitable for neutron capture therapy. However, these compounds are only marginally stable in water. Hydrolysis of some phenylboronic pinacol esters is described here. The kinetics is dependent on the substituents in the aromatic ring. Also the pH strongly influences the rate of the reaction, which is considerably accelerated at physiological pH. Therefore, care must be taken when considering these boronic pinacol esters for pharmacological purposes.      

Preparation of selectively protected protoescigenin derivatives for synthesis of escin analogs and neoglycoconjugates

Protoescigenin, the main aglycone of horse chestnut saponin mixture known as escin, was selected as substrate for exploratory chemistry towards selective protection, followed by propargyl ether formation and subsequent condensation with azido-monosaccharides, to obtain novel triazole linked conjugates of the triterpene.      

The first synthesis of 3-deoxyoripavine and its utilization in the preparation of 10-deoxyaporphines and cyprodime

The synthesis of 3-deoxyoripavine (7) was realized as a novel and promising intermediate towards the synthesis of the important class of dopaminergic and/or serotonergic 10-deoxyaporphines and the special pharmacological tool µ opioid antagonist cyprodime. Generally, the preparation of these valuable biologically active compounds was achieved in remarkable yields.      

DFT calculation and assignment of vibrational spectra of aryl and alkyl chlorophosphates

DFT calculations of vibrational spectra of chlorophosphates using wide range of basis sets and hybrid functionals were performed. Good agreement between calculated and experimental vibrational spectra was reached by the combination of non-empirical functional PBE0 with both middle and large basis sets. The frequencies of the stretching vibrations of the phosphate group calculated using semi-empirical functional B3LYP for all basis sets deviate significantly from the experimental values. The number of polarization functions on heavy atoms was shown to be a key factor for the calculation of vibrational frequencies of organophosphates. The importance of consideration of all the stable rotamers for a complete assignment of fundamental modes was shown.      

Hydroconversion of parafine LTP56-H over nickel/Na-mordenite catalysts

Nickel catalysts supported on Na-mordenite were used for paraffin LTP56-H hydroconversion into liquid material as a possible component for engine fuels. The effects of none-catalytic thermal treatment and catalytic conditions-zeolite type and reaction conditions (solvent) on the process of liquefaction of LTP56-H paraffin and physicochemical properties of catalysts were studied. The physicochemical properties of catalytic systems were investigated using XRD, TPR, TPD-NH3 and SEM-EDS methods.      

Reaction of barbituric acid with organic azides and phosphonium ylides

Amination by organic azides has been carried out to provide aminobarbiturates by fusion of a triazole ring to the 5,6-positions of barbituric acid followed by cleavage and thermal elimination of nitrogen, whereas aza-Wittig reaction gave phosphoranylidene barbituric acid salts.      

Controlled pesticide release from biodegradable polymers

Polymers have been widely used in agriculture for applications including controlled release of pesticides and other active ingredients. The ability to predict their delivery helps avoid environmental hazards. Macromolecular matrices used as carriers in controlled release of agricultural active agents, especially pesticides, are reviewed. The review focuses on the advantages and mechanisms of controlled release. It includes biodegradable polymers in agriculture, their manufacturing methods, and their degradation mechanisms and kinetics. The article also presents a critical account of recent release studies and considers upcoming challenges.      

Carbon nanotube-ionic liquid nanocomposite modified carbon-ceramic electrode for determination of dopamine in real samples

Room temperature 1-butyl-3-methylimidazolium tetraflouroborate ([BMIM][BF₄]) ionic liquid was employed for dispersion of multi walled carbon nanotubes (MWCNTs) and the formation of nanocomposite on the surface of a carbon-ceramic electrode. The surface of the modified electrode was characterized using scanning electron microscopy and electrochemical impedance spectroscopy. The modified electrode exhibited excellent electrochemical activity to oxidation of dopamine (DA); whereas electro oxidation of ascorbic acid (AA) was not seen and electro oxidation of uric acid (UA) appeared at a more positive potential than DA. The multi walled carbon nanotube-ionic liquid nanocomposite modified carbon-ceramic electrode was used for the selective determination of DA in the presence of high levels of AA and UA using differential pulse voltammetry. The calibration curve for DA was linear in the range of 3.00 to 130 µM with the detection limit (S/N=3) of 0.87 µM. The present electrode was successfully applied to the determination of DA in some commercial pharmaceutical samples and human blood serum.      

Aqueous photocatalytic oxidation of prednisolone

The research into the aqueous photocatalytic oxidation of the anti-inflammatory drug prednisolone was undertaken with P25 titanium dioxide (Evonik) and visible light-sensitive sol-gel synthesized titania-based photocatalysts containing carbon, sulphur, and iron. Possible prednisolone photocatalytic oxidation reaction pathways were proposed based on a number of oxidation by-products determined in the present study. The prednisolone adsorption properties, effects of initial prednisolone concentration, pH, usual wastewater matrix admixtures, like carbamide and sucrose, were studied. The nontoxicity of doped catalysts towards Tetrahymena thermophila, a ciliate protozoa present in the activated sludge, indicated their lower oxidative ability compared to P25, but also implied their potential application in pre-treatment of toxic hazardous materials under VIS or solar radiation before the biological degradation stage.      

Electrochemical determination of tyrosine in the presence of uric acid at a carbon paste electrode modified with multi-walled carbon nanotubes enhanced by sodium dodecyl sulfate

Tyrosine (Tyr) was quantitated with high sensitivity and selectivity in the presence of uric acid (UA) using a carbon paste electrode modified with multi-walled carbon nanotubes. Tyr and UA were catalytically oxidized with diffusion-controlled characteristics. They were determined simultaneously by differential pulse voltammetry with a potential difference of 350 mV. The electrocatalytic currents increase linearly with Tyr and UA concentrations 4×10^?7?1×10^?4 M and 3×10^?7?2×10^?4 M. Their detection limits were 1×10^?7 and 5.1×10^?8 M respectively. In the presence of sodium dodecyl sulfate the Tyr detection limit improved from 1×10^?7 to 6.9×10^?8 M. The electrode was successfully used to quantitate Tyr and UA in serum.      

Aerobic oxidation of cumene catalysed by 4-alkyloxycarbonyl-N-hydroxyphthalimide

4-Hexyloxycarbonyl-, 4-dodecyloxycarbonyl- and 4-hexadecyloxycarbonyl-N-hydroxyphthalimides were synthesised using trimellitic anhydride chloride as the starting material. The obtained lipophilic derivatives of N-hydroxyphthalimide were applied as catalysts of the cumene oxidation reaction with oxygen performed in polar acetonitrile, in non-polar tert-butylbenzene and in the absence of a solvent. The courses of reactions catalysed by N-hydroxyphthalimide and its derivatives were compared.