双钙钛矿型电极材料在中低温固体氧化物燃料电池中的应用

近年来固体氧化物燃料电池(SOFCs)由于高效率(高达80%)、环境友好和燃料适用广泛等优点得到了人们的广泛关注。但是,由于其通常需要1000 ℃以上的工作温度才能达到所需的性能,其商业化及产业化应用受到了严重制约。中低温固体氧化物燃料电池(IT-SOFCs)的研发是固体氧化物燃料电池进一步商业化的必然趋势。降低工作温度(从高温1000 ℃以上降低至中低温500~800 ℃)可提高燃料电池的稳定性、降低电池运行成本、增加系统材料可选性,而研发出中低温下性能优异的燃料电池电极材料是实现固体氧化物燃料电池中低温化的关键。作为混合离子-电子导体材料之一,双钙钛矿型氧化物材料可以成功地将燃料反应活性区域从传统的电极-电解质-反应气体三相界面扩展到整个电极的表面, 进而降低材料的极化电阻并大大提高电极在中低温条件下对氧的催化活性。由于双钙钛矿结构材料良好的氧离子传输能力、较低的热膨胀系数、优异的催化活性、较强的抗硫中毒和抗碳沉积能力,近年来成为非常有发展潜力的SOFCs电极材料。本文综述双钙钛矿型氧化物材料作为SOFCs电极材料的最新研究进展,指出目前双钙钛矿电极材料存在的主要问题,并提出SOFCs未来的主要研究发展方向。     

《固体氧化物燃料电池新型材料》

本书主要结合国内外固体氧化物燃料电池材料的研究进展,探讨钙钛矿型复合氧化物电解质材料、阴极材料和阳极材料及其组成单电池的制备工艺和性能,以期对固体氧化物燃料电池技术的研究有所推动。可供从事固体氧化物燃料电池和新材料研究与开发的科研人员、企事业单位的技术人员和管理人员阅读,也可供能源、化学、材料等相关专业教师     

钙钛矿型氧化物的制备及其在固体氧化物燃料电池和金属-空气电池中的应用

本文对钙钛矿型氧化物的制备方法及其用于固体氧化物燃料电池(SOCFs)和金属-空气电池中的最新进展进行了较为全面的综述。制备钙钛矿型氧化物的方法有很多,包括盐分解法、固相法、共沉淀法、溶胶-凝胶法、水热法、反微乳法和模板法等。不同的制备方法可以得到各种形貌的钙钛矿型氧化物,如纳米立方体、纳米管、纳米棒、纳米片、纳米纤维和介孔结构。本文总结了这些制备方法的优点、缺点以及其适用的范围。作为一种重要的功能材料,钙钛矿型氧化物广泛应用于电极材料中。在SOCF中,重点介绍了阴极、阳极和电解质的研究现状,从电极材料的设计出发,比较了它们用于不同电极材料时的稳定性、电导率以及电催化活性,指出不足之处;在空气电极中,主要讨论了影响钙钛矿型氧化物氧的析出/还原催化活性和稳定性的因素。最后对钙钛矿型氧化物今后研究的方向和应用前景进行了预测。     

中低温固体氧化物燃料电池阴极材料

固体氧化物燃料电池(SOFCs)作为一种高效的能量转化装置,其成功应用将有效地节约能源和降低能源利用过程中环境污染物的排放,对人类社会的可持续发展意义重大.低温化可加快SOFCs商品化的步伐,而其关键在于开发高性能的阴极材料.本论文对近年来在中低温SOFCs阴极材料方面的研究进展进行了较全面的综述,其中包括Ba0.5S...     

固体氧化物燃料电池阳极材料研究及其在高温水电解制氢方面的应用

本文综述了固体氧化物燃料电池阳极材料的研究现状和进展。详细地介绍了国内外固体氧化物燃料电池阳极材料的制备、改性、微观结构与性能关系以及阳极反应动力学机理，并对各种材料适用的条件和优缺点进行了比较。对阳极材料在高温电解制氢领域阴极上的应用前景进行了展望。     

CeO_2/RP-PSCFM@CoFe阳极材料用于质子导体乙烷燃料电池共生乙烯和电能（英文）

固体氧化物燃料电池钙钛矿阳极材料可以通过改性获得优异的催化活性,低的极化阻抗和稳定的抗积炭能力。在此,以立方相钙钛矿Pr_(0.4)Sr_(0.6)Co_(0.2)Fe_(0.7)Mo_(0.1)O_(3-δ)作为阳极前驱体,然后将CeO_2成功地浸渍到阳极的多孔结构中。通过原位还原技术获得了纳米合金粒子负载钙钛矿基底的复合阳极用于质子导体乙烷固体氧化物燃料电池。在氢气和乙烷气氛中,750℃时,燃料电池峰值功率密度分别达到253和183 m W·cm~(-2)。而且,在十小时的测试中燃料电池性能没有衰减反而电流密度随着时间的延长而增加,表明CeO_2浸渍表现出优异的催化活性和抗积炭稳定性。同时,通过产物分析,乙烯的产率从650℃下的23.52%增加到750℃下的34.09%,并且乙烯选择性超过94%。因此改性的阳极通过析出的纳米颗粒与CeO_2的协同作用,促进了燃料电池电极的催化活性和稳定性,将其运用到质子导体固体氧化物乙烷燃料电池中成功实现了乙烯与电能的共生。     

直接氨固体氧化物燃料电池

塑性挤压成型阳极支撑管,采用真空浸涂法在阳极表面制备了均一、致密的氧化钇稳定的氧化锆电解质层,然后在电解质表面刷涂上阴极层,成功制备了阳极支撑型管状固体氧化物燃料电池.分别以氢气和氨气为燃料,考察了该管状固体氧化物燃料电池的电池性能.在800℃操作时,以氢气和氨气为燃料的电池最大输出功率密度分别为202和200 mW/cm2.表明氨气可以作为固体氧化物燃料电池的替代燃料.     

高温固体氧化物电解池钙钛矿型氧电极材料Ba_xSr_(1-x)Co_(0.8)Fe_(0.2)O_(3-δ)结构计算与性能研究

研究和开发高性能的钙钛矿型混合电导氧化物是目前高温固体氧化物电解池(SOEC)氧电极材料研究的热点.选择BaxSr1-xCo0.8Fe0.2O3-δ系列材料,通过对材料的容差因子、关口半径、晶格自由体积等计算,以及对平均键能、B位离子的变价能力、催化活性等方面的分析,确定了A位最佳配比.对优化出的Ba0.5Sr0.5Co0.8Fe0.2O3-δ材料的电化学性能进行了研究,并与自制的La0.2Sr0.8MnO3(LSM)氧电极材料进行了比较.结果表明:850℃下阳极极化阻抗(ASR)仅为0.07Ωcm2,远低于LSM;将其应用于SOEC氧电极进行高温电解制氢试验,产氢速率为相同条件下LSM的2.3倍,说明将Ba0.5Sr0.5Co0.8Fe0.2O3-δ用作SOEC阳极材料具有很好的应用前景.     

双钙钛矿型固体氧化物燃料电池阳极材料

固体氧化物燃料电池(solid oxide fuel cell,SOFC)是一种能量转化装置,具有转换效率高、环境友好、燃料适应性强等优点,其中,阳极作为燃料气的电化学反应场所,对SOFC性能起关键作用。相比于传统Ni-YSZ阳极,钙钛矿阳极材料结构稳定性好,具有较强的抗碳沉积、硫中毒能力。双钙钛矿结构由于具有晶格位置的多样化,因而材料结构和性能具有更强的可调控性,受到人们的广泛关注,成为新型阳极材料的重要研究方向。但相较于传统Ni-YSZ阳极材料,双钙钛矿阳极仍存在催化活性差,电导率低等问题。本文综述了近十几年双钙钛矿阳极材料的研究进展,首先对A位和B位双钙钛矿结构特征和形成原因进行了简单介绍,然后对两种双钙钛矿结构的典型阳极材料性能特点、改性方法和改性机理进行了分类总结,包括Sr₂MgMoO₆、Sr₂CoMoO₆、Sr₂NiMoO₆、Sr₂FeMoO₆、PrBaMn₂O_5+δ等材料。最后对双钙钛矿阳极材料未来的研究方向提出了建议。     

A2 BO4型类钙钛矿材料中非化学计量氧的分子模拟

A_2BO_4型类钙钛矿材料因其独特的物化性能,可应用于催化、固体氧化物燃料电池等领域。本文简要介绍了A_2BO_4型类钙钛矿材料的结构和非化学计量氧(δ)的研究方法,对材料的δ分子模拟研究进展进行了综述,重点介绍了材料非化学计量氧迁移、输运机制的分子模拟研究现状,包括未掺杂纯相、A位掺杂和B位掺杂A_2BO_4型类钙钛矿三类材料,同时也对该领域的发展趋势进行了展望。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.