聚氯乙烯／线性低密度聚乙烯共混体系的相容性

用动态力学分析（ＤＭＡ）和傅利叶变换红外光谱（ＦＴＩＲ）研究了氢化聚丁二烯－ｂ－聚甲基丙烯酸甲酯（ＨＰＢＤ－ｂ－ＰＭＭＡ）共聚物增容剂对聚氯乙烯（ＰＶＣ）与线性低密度聚乙烯（ＬＬＤＰＥ）共混体系的增容作用．增容剂使共混物中两相的玻璃化温度发生变化，说明其相容性增加．ＦＴＩＲ的结果表明，增容剂中羰基与ＰＶＣ的α氢形成氢键，使ＣＯ，Ｈ─Ｃ及Ｃ─Ｃｌ的振动频率变化，峰形加宽．     

由特殊相互作用导致的高分子间的络合

采用结合物理老化技术的示差扫描量热法（ＤＳＣ）以及非辐射能量转移荧光光谱法（ＮＲＥＴ）研究了聚（聚乙烯－ｃｏ－４－乙烯基苯酚与聚甲基丙烯酸乙酯（ＰＥＭＡ）共混体系的相容与络合行为。对ＳＴＶＰｈ／ＰＥＭＡ共混体系,当ＳＴＶＰｈ中的ＯＨ基团含量仅为１ｍｏｌ％时,即可实现相容。随ＯＨ基含量继续增加,共混体系的Ｔｇ值上升并逐渐接近和高于Ｆｏｘ方程计算值,玻璃化转变区域逐渐变窄,ＮＲＥＴ能量转移效率远高于普     

SYNTHESIS, CHARACTERIZATION OF 2-[2-(3-NITRO-4-METHOXYLPHENYL) VINYLI-1-ME

ＳＹＮＴＨＥＳＩＳ，ＣＨＡＲＡＣＴＥＲＩＺＡＴＩＯＮＯＦ２－［２－（３－ＮＩＴＲＯ－４－ＭＥＴＨＯＸＹＬＰＨＥＮＹＬ）ＶＩＮＹＬＩ－１－ＭＥＴＨＹＬＰＹＲＩＤＩＮＩＵＭＰＥＮＴＡＡＮＤＨＥＸＡＮＩＴＲＡＴＯＲＡＲＥＥＡＲＴＨ（Ⅲ）ＣＯＭＰＬＥＸＥＳＨ...     

脱氧核糖核酸变性和损伤的吸附伏安法研究

本文用汞电极（ＨＭＤＥ）二次导数阴极吸附伏安（ＳＤ－ＡｄＣＳＶ）和碳电极（ＧＣＥ、ＣＰＥ）导数循环伏安（ＦＤ－ＣＶ）法研究了核酸受热、紫外线、超声波和丝裂霉素Ｃ（ＭＭＣ）作用下的变性作用。在０．１ｍｏｌ／Ｌ（Ｋ２ＨＰＯ４＋ＫＨ２ＰＯ４）－０．１ｍｏｌ．Ｌ ＮａＣｌ（ｐＨ７．０）底液中，吸附的单股（ｓｓ－）和双螺旋（ｄｓ－）ＤＮＡ分别在ＨＭＤＥ上得到特征还原峰Ｐ３和Ｐ２，和在碳电极上得到氧化峰Ａ。物     

PVC/PBD-b-PMMA共混体系相容性的研究

采用ＤＭＡ和ＴＥＭ系统研究了聚丁二烯－聚甲基丙烯酸甲酯的嵌段共聚物（ＰＢＤ－ｂ－ＰＭＭＡ）与聚氯乙烯（ＰＶＣ）共混体系的相容性问题。结果表明：ＰＶＣ／ＰＢＤ－ｂ－ＰＭＭＡ共混体系具有部分相溶性。相容的程度与共混体系的组成、组分聚合物的分子量以及共聚物中ＰＢＤ和ＰＭＭＡ嵌段的比例密切相关。     

醋酸纤维素／聚乙烯基吡咯烷酮共混体系的相容性研究（Ⅰ）

用ＤＳＣ，ＤＭＴＡ研究了醋酸纤维素（ＣＤＡ），聚乙烯基吮咯烷酮（ＰＶＰ）及ＣＤＡ／ＰＶＰ共混体系的玻璃化转变行为．用精密量热法测定了该体系的混合热焓．结果表明：共混体系只存在一个玻璃化转变温度（Ｔｇ），其值随共混组成的变化而改变；共混体系的混合热焓为负值，其绝对值随组成中ＰＶＰ含量的增加而减少．力学性能研究表明，共混体系具有协同效应．上述试验结果证明，ＣＤＡ和ＰＶＰ是一对相容性高聚物．     

POM／EVA共混物的研究

用力学测试、扫描电镜（ＳＥＭ）、热分析（ＤＳＣ）等手段研究了聚甲醛（ＰＯＭ）与乙烯－醋酸乙烯酯共聚物（ＥＶＡ）共混物（ＰＯＭ／ＥＶＡ）的力学性能及其微同形态；用聚甲醛与马来酸二丁酯（ＤＢＭ）的接枝物（ＰＯＭ－ｇ－ＤＢＭ）作相溶剂，能改变共的两相间的粘结力，从而提出了共混物的力学性能，ＳＥＭ观察表明接枝物的加入改变了ＰＯＭ／ＥＶＡ共混物的断裂方式，微观形态及结晶性能，对其热性能影响不大；通过改变ＰＯ     

SYNTHESIS AND POTENTIAL ANTINEOPLASTIC ACTIVITY OF α－（1－CYCLOPENTENYL） CYCLOPENTANONE DERIVATIVES －A NEW FAMILY OF ANTICANCER AGENTS

ＳＹＮＴＨＥＳＩＳＡＮＤＰＯＴＥＮＴＩＡＬＡＮＴＩＮＥＯＰＬＡＳＴＩＣＡＣＴＩＶＩＴＹＯＦα－（１－ＣＹＣＬＯＰＥＮＴＥＮＹＬ）ＣＹＣＬＯＰＥＮＴＡＮＯＮＥＤＥＲＩＶＡＴＩＶＥＳ－ＡＮＥＷＦＡＭＩＬＹＯＦＡＮＴＩＣＡＮＣＥＲＡＧＥＮＴＳ￥ＣｈｕａｎＭ...     

LASER-ENHANCED ELECTROCHEMICAL DOPING OF POLY (N-VINYLCARBAZOLE)

ＬＡＳＥＲ－ＥＮＨＡＮＣＥＤ　ＥＬＥＣＴＲＯＣＨＥＭＩＣＡＬ　ＤＯＰＩＮＧ　ＯＦ　ＰＯＬＹ　（Ｎ－ＶＩＮＹＬＣＡＲＢＡＺＯＬＥ）ＬＡＳＥＲ－ＥＮＨＡＮＣＥＤＥＬＥＣＴＲＯＣＨＥＭＩＣＡＬＤＯＰＩＮＧＯＦＰＯＬＹ（Ｎ－ＶＩＮＹＬＣＡＲＢＡＺＯＬＥ）Ｙａ...     

界面相互作用对尼龙6／聚乙烯共混物形态结构和流变行为的影响

利用扫描电子显微镜和动态力学分析仪研究了马来酸酐熔融接枝聚乙烯（ＰＥ－ｇ－ＭＡ）对尼龙６／聚乙烯（ＰＡ６／ＰＥ）共混物形态结构和动态力学行为的影响．结果表明，ＰＥ－ｇ－ＭＡ使ＰＡ６／ＰＥ共混物中ＰＡｅ的玻璃化转变峰向低温例偏移，这主要归因于ＰＥ－ｇ－ＭＡ改善了ＰＡ６和ＰＥ二者的相容性；但随着ＰＥ分散相中ＰＥ－ｇ－ＭＡ所占比重的增加，ＰＥ－ｇ－ＭＡ与ＰＡ６之间界面化学键合密度增大，使得ＰＡ６的玻璃化转变温度反而提高．同时，利用平行板流交仪研究了ＰＥ－ｇ－ＭＡ对ＰＡ６／ＰＥ共混物熔体流变行为的影响．ＰＥ－ｇ－ＭＡ使共混物熔体粘度和动态储能模量增大，这应归因于ＰＡ６／ＰＥ－ｇ－ＭＡ之间在熔融共混过程中的界面化学键合．     

聚合物阻尼材料的吸音系数研究

不同聚合物材料具有不同的吸声特征吸收峰,这对于研究聚合物材料的阻尼性能及其应用都有一定的意义。本文利用驻波管吸音系数测试仪测量了聚氧乙烯(PVC)聚合物材料在不同温度及频率下的吸系数,得到了不同频率下吸音系数和温度的关系图,与理论计算得到的谱图拟合较好,进一步的     

Graft polymers from poly(vinyl chloride) and chlorinated rubber

Graft polymers from poly(vinyl chloride) (PVC) and chlorinated rubber (CIR) with side chains of poly(methyl methacrylate) (PMMA), poly(methyl acrylate) (PMA), or poly(ethyl methacrylate) (PEMA) were synthesized. For this purpose, a vinyl monomer was polymerized in the presence of small quantities of PVC or CIR with benzoyl peroxide as catalyst. The graft polymers were separated from both homopolymers by precipitation with methanol from methyl ethyl ketone solutions of the reaction products and the grafting efficiency was calculated. The graft polymers were characterized by infrared spectra, elemental analysis, NMR, and osmometric or light-scattering determinations. From the results it is concluded that the PVC or CIR molecules contain side chains of PMMA, PMA, or PEMA. The graft polymers showed higher molecular weights, and the values of second virial coefficient for these polymers were much different from those of the starting polymers.     

高分子梯度溶液吸声机理的研究

Emphasis of this work was paid to the study on the sound absorption mechanism of gradient polymer solution. A specially designed gradient polymer solution and an uniform polymer solution were synthesized. The sound attenuation properties of the gradient polymer solution and the uniform polymer solution were measured in sound tube. Results show that the sound attenuation of the gradient polymer solution is larger than that of the uniform. Depending on the experimental result and the theory of sound wave propagation in layered medium, a mathematical model of sound attenuation in the gradient polymer solution was established. And a calculating program was carried out by Maple and Matlab. The calculated results are fairly in good agreement with the measured. So mechanism of the gradient polymer solution was developed. This mechanism can be described as follows: a polymer solution with the concentration gradient layer forms the gradient polymer solution. This gradient layer led to multiple reflection and absorption of sound when the sound wave propagated in it. Finally the sound energy was transferred into heat.     

几种(C^N)PtIIQ型配合物的电子结构和紫外-可见吸收光谱

在B3LYP/LANL2DZ水平上优化了三种(C^N)PtIIQ 型配合物基态的几何结构, 进行了频率计算, 并采用含时密度泛函(TD-DFT)方法结合极化连续体模型(PCM)计算了目标配合物在CH2Cl2溶液中的电子结构和紫外-可见吸收光谱. 计算值与文献报道值相似. 计算结果表明这三种(C^N)PtIIQ型配合物在可见光区都有强度较大而且宽的吸收峰, 它们的最低能量吸收峰的跃迁具有ILCT(配体内部电荷转移)和部分MLCT(金属向配体的电荷转移)的特征, 不同于PtIIQ2型配合物在多数情况下表现出的ILCT的跃迁性质.     

Distributed relaxations in PVC/PEMA polymer blends as revealed by thermostimulated depolarization current

Thermally stimulated depolarization current (TSDC) was used to investigate the relaxation in amorphous polymers including poly(vinyl chloride) (PVC) and poly(ethyl methacrylate) (PEMA) and its polyblend over a temperature range that covers the -relaxation. Analysis of TSDC behavior revealed that PVC and PEMA are characterized with a broad peak located at the temperature maximum, T_m=355 and 347 K, respectively. These peaks were positioned in the vicinity of the glass-transition temperature of each polymer, which are attributed to dipole–dipole interaction. Moreover, thermal sampling technique (TS) was used to resolve the complex TSDC behavior of all samples to obtain its elementary peaks characterized by a single relaxation time. The peak parameters characterizing the TS peaks have been estimated by using the iterative method. In addition, around each relaxation, compensation phenomena have been observed.     

Effect of temperature and membrane preparation parameters on gas permeation properties of polymethacrylates

Permeabilities of N₂, Ar, O₂, CO₂, and H₂ gases in PEMA (Polyethylmethacrylate) membranes have been measured above and below glass transition in the temperature range of 25–70 °C. The permeabilities of the gases were observed increasing with temperature. Arrhenius plot of permeability versus temperature data showed that there is a slope discontinuity at near to T_g of PEMA. In addition, the effects of membrane preparation parameters by solvent casting method (percentage of polymer in solvent, annealing temperature, annealing time, evaporation temperature, and evaporation time) have been investigated by using homogenous dense membranes of PEMA. It is observed that membrane preparation parameters strongly affect the membrane performance and the reproducibility of the permeability measurements. On the other hand, the effect of polymer structure on membrane performance has been investigated. Comparison of the permeabilities of N₂, Ar, O₂, CO₂, and H₂ gases in PEMA and PMMA membranes shows that PMMA membranes have smaller permeabilities and higher selectivities than PEMA membranes because of their higher glass transition temperature, T_g. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3025–3033, 2007     

Development and characterization of reactive extruded PVC/polyacrylate blends

This paper describes a method to obtain polymer blends by the absorption of a liquid solution of monomer, initiator, and a crosslinking agent in suspension type porous poly(vinyl chloride) (PVC) particles, forming a dry blend. These PVC/monomer dry blends are reactively polymerized in a twin‐screw extruder to obtain the in situ polymerization in a melt state of various blends: PVC/poly(methyl methacrylate) (PVC/PMMA), PVC/poly(vinyl acetate) (PVC/PVAc), PVC/poly(butyl acrylate) (PVC/PBA) and PVC/poly(ethylhexyl acrylate) (PVC/PEHA). Physical PVC/PMMA blends were produced, and the properties of those blends are compared to reactive blends of similar compositions. Owing to the high polymerization temperature (180°C), the polymers formed in this reactive polymerization process have low molecular weight. These short polymer chains plasticize the PVC phase reducing the melt viscosity, glass transition and the static modulus. Reactive blends of PVC/PMMA and PVC/PVAc are more compatible than the reactive PVC/PBA and PVC/PEHA blends. Reactive PVC/PMMA and PVC/PVAc blends are transparent, form single phase morphology, have single glass transition temperature (T_g), and show mechanical properties that are not inferior than that of neat PVC. Reactive PVC/PBA and PVC/PEHA blends are incompatible and two discrete phases are observed in each blend. However, those blends exhibit single glass transition owing to low content of the dispersed phase particles, which is probably too low to be detected by dynamic mechanical thermal analysis (DMTA) as a separate T_g value. The reactive PVC/PEHA show exceptional high elongation at break (～90%) owing to energy absorption optimized at this dispersed particle size (0.2–0.8 µm). Copyright © 2005 John Wiley & Sons, Ltd.     

Effects of sound field on the growth of Chrysanthemum callus

The effects of sound field on Chrysanthemum callus were studied. The field of alternative stress was generated through a strong sound field system set up in our lab, and the activity of SOD, the content of soluble proteins, the activity of IAA oxidase and the absorption rate of calcium were measured. We found that the sound field stimulation has dual effects, which can enhance or inhibit the growth of Chrysanthemum callus, the growth effects of sound field on Chrysanthemum callus depended greatly on the intensity and frequency of sound field. The activity of SOD, the content of soluble proteins and the absorption rate of calcium in callus increased with the intensity and frequency increasing. However, those indexes began to decrease when the intensity and frequency went beyond the limit of 100 dB and 800 Hz, respectively. However, the changing tendency of IAA oxidase activity was reversed to the above three indexes. We draw a conclusion that the optimal stimulation conditions are 100 dB and 800 Hz. Under the conditions, the sound field can distinctly enhance the growth of Chrysanthemum callus. We think that moderate stress stimulation can enhance the assimilation of tissues or cells, improve their physiological activity and accelerate the growth of plants, this moderate stress stimulation is helpful to the growth of plant tissues.     

Investigation on sound absorption properties of kapok fibers

Sound absorption properties of natural kapok fibers have been investigated. Kapok fibrous assemblies with different bulk density, thickness, fiber length and orientation were manufactured, and their acoustical performances were evaluated by using an impedance tube instrument. Results show that the kapok fiber has excellent acoustical damping performance due to its natural hollow structure, and the sound absorption coefficients of kapok fibrous assemblies are significantly affected by the bulk density, thickness and arrangement of kapok fibers but less dependent on the fiber length. Compared with assemblies of commercial glass wool and degreasing cotton fibers, the kapok fiber assemblies with the same thickness but much smaller bulk density may have the similar sound absorption coefficients. Theoretical modelling of the acoustical damping performance of kapok fibers shows a good agreement with the experimental data. All the results demonstrate that kapok fiber is a promising light and environment-friendly sound absorption material.     

Sound absorption properties of polyurethane foams derived from crude glycerol and liquefied coffee grounds polyol

The main objective of this study was to evaluate the sound absorption properties of rigid polyurethane foams (PUFs) produced from crude glycerol (CG) and/or liquefied coffee grounds derived polyol (POL). The lignin content of POL proved to have a major influence on the structure and mechanical properties of the foams. Indeed, the POL content increased the cell size of the foams and their stiffness, which subsequently influenced the sound absorption coefficients. The POL derived foam has slightly higher sound absorption coefficient values at lower frequencies, while the CG foam has higher sound absorption coefficient values at higher frequencies. In turn, the foam prepared using a 50/50 mixture of polyols presents slightly higher sound absorption coefficient values in the medium frequencies range due to a balance between the cell structure and the mechanical properties. The results obtained seem to suggest that the mechanisms involved in sound wave absorption depend on the formulation used to prepare the foams. Additionally higher POL contents improved the thermal stability of PUFs as well as their mechanical properties. From this work the suitability of CG and/or POL derived PUFs as sound absorbing materials has been proven.