Synthesis, characterization and thermal degradation of functional benzoxazine monomers and polymers containing phenylphosphine oxide

Three phosphorus-containing bisphenol compounds, bis(4-hydroxyphenyl)phenylphosphine oxide (BHPPO), bis(4-hydroxyphenoxyphenyl)phenylphosphine oxide (BPPPO), and bis(4-hydroxyphenoxy)phenylphosphine oxide (BPHPPO) have been synthesized as starting materials for the synthesis of benzoxazine monomers. Benzoxazine monomers containing phenylphosphine oxide have been prepared and subsequently characterized by FT-IR and ¹H NMR. The monomers are thermally initiated and polymerized via ring-opening polymerization. Thermogravimetric analysis indicates that phosphorylation can have a profound effect on increasing char yield and on thermal degradation temperatures.     

Organolithium Displacement of Aryl Anions from Tertiary Phosphine Derivatives of Diphenyl Ether

Abstract

Methyllithium displaces a phenyl anion from 10-phenyl-10H-phenoxaphosphine to produce a 70:30 mixture of 10-methyl-10H-phenoxaphosphine and starting phosphine. Butyllithium gives 50% conversion to 10-butyl-10H-phenoxaphosphine. These reactions could take place either by a one-step nucleophilic displacement or by ring cleavage followed by recyclization. To show the feasibility of the two-step process, non-heterocyclic lithiated tertiary phosphines were generated and shown to cyclize to phenoxaphosphines. For example, reaction of 2-phenoxyphenyldiphenylphosphine with phenyllithium produced 10-phenyl-10H-phenoxaphosphine (by lithiation ortho to oxygen followed by cyclization) along with triphenylphosphine (by direct displacement of 2-lithiodiphenyl ether). Other compounds prepared in this work: 2,2′-bis(diphenylphosphino)-diphenyl ether, bis(2-phenoxyphenyl)phenylphosphine, tris(2-phenoxyphenyl)phosphine, 4-carboxy-10-phenyl-10H-phenoxaphosphine, and the oxides and sulfides of the phosphines.     

Cyclic(arylene ether) oligomers containing the phenylphosphine oxide moiety

A series of cyclic(arylene ether) oligomers containing the phenylphosphine oxide moiety has been synthesized by reaction of bis(4-fluorophenyl)phenylphosphineoxide with dihydroxy compounds 1a–d as well as 1,2-dihydro-4-(4-hydroxyphenyl) (2H)phthalazin-1-one in DMF in the presence of anhydrous K₂CO₃ under high dilution conditions. These cyclic oligomers are amorphous and have high solubility in organic solvents. The MALDI-TOF-MS technique has been used as a powerful tool to analyze these cyclic systems. The cyclic(arylene ether) oligomers readily undergo anionic ring-opening polymerization in the melt at 350°C by using potassium 4,4′-biphenoxide as the initiator, affording linear, high molecular weight poly(arylene ether)s containing the phenylphosphine oxide moiety. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 519–526, 1998     

Two-fragment α-adrenolytics

A method for the synthesis of hypotensive alkyl(phenyl)[ω-(N-phenylpiperazino)alkyl]-phosphine oxides by reacting alkyl(ω-haloalkyl)phenylphosphine oxides withN-phenylpiperazine was elaborated. Phenyl[γ-(N-phenylpiperazino)propyl]propylphosphine oxide reacts with alkyl halides to give [γ-(N-alkyl-N′-phenylpiperazinio)propyl]phenyl(propyl)oxophosphine halides. For Part 1 see Ref. 1. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 488–492, March, 2000.     

13C nuclear magnetic resonance of organophosphorus compounds XI—aminophosphines

Natural abundance ¹³C NMR studies have been carried out on a series of organophosphorus compounds possessing P? N bonds. For the first time a one-bond temperature-dependent ¹³C—³¹P nuclear spin coupling was observed for the P-phenyl carbons in bis(N,N-dibenzylamino)phenylphosphine (0-9 Hz) and bis(N,N-diethylamino)phenylphosphine (0–2 Hz). This temperature-dependent behavior can be rationalized in terms of free rotation about the phenyl phosphorus bond with concomitant hindered rotation about the P? N bonds. A conformational preference for the nitrogen and phosphorus lone pairs to exist in the trans orientation is indicated. In the similarly substituted 5-membered heterocyclic ring compound, 1,3-dimethyl-2-phenyl-1,3-diazaphospholidine, the phenyl one-bond coupling increases to (?) 42.1 Hz and becomes temperature independent. These data suggest that ¹J(PC) is very responsive to electronic effects.     

The Deoxygenation of Phosphine Oxides under Green Chemical Conditions

The deoxygenation of a few diaryl‐phenylphosphine oxides, dimethyl‐phenylphosphine oxide, and 3‐methyl‐1‐phenyl‐3‐phospholene 1‐oxide was studied by phenylsilane, tetramethyldisiloxane (TMDS), and polymethylhydrosiloxane (PMHS) under conventional or microwave (MW) heating, in toluene or in the absence of any solvent at different temperatures. It was found that the deoxygenation with TMDS or PMHS under MW and solvent‐free conditions may be the method of choice and provides a green chemical approach.     

Synthesis and properties of phosphorus–containing polycarbonates

Aromatic polycarbonates were prepared from several dichloroformates with phosphorus-containing bisphenols, such as bis(p-hydroxyphenyl)methyl phosphine oxide and bis(p-hydroxyphenyl)phenyl phosphine oxide, or with nonphosphorus bisphenols by interfacial, low-temperature solution, and high-temperature solution polycondensation. The interfacial polycondensation gave the best results for polycarbonates, from which colorless, transparent, and fairly though films were cast. In contrast to analogous nonphosphorus polycarbonates, the phosphorus-containing polycarbonates exhibited lower polymer melt temperatures, greater range of solubility, and better self-extinguishing properties, but less stability to alkali and acid. Thermal degradation of the typical phosphorus polycarbonates proceeded in two steps, and the activation energies for the maximum rates of weight loss range from 29 to 45 kcal/mole.     

Synthesis of Novel Benzo‐substituted Macrocyclic Ligands Containing Thienothiophene Subunits

A facile synthetic approach was adopted toward the synthesis of benzo‐fused macrocyclic ligands with thienothiophene group incorporated into the ring system. Thus, treatment of bis(bromomethyl) compound 2 with the K salt of the appropriate bis(phenol)s 3a , 3b , 3c , 3d in boiling DMF led to the formation of the novel macrocyclic diamides 4a , 4b , 4c , 4d in 39–58% yield. Reaction of 2 with the potassium salt (obtained upon treatment of salicylaldehyde 5 with ethanolic potassium hydroxide) in refluxing DMF afforded the novel bis(aldehyde) 6 in 73% yield. Cyclocondensation of 6 with the appropriate bis(N‐substituted) cyanoacetamide derivatives 7a and 7b afforded the target macrocycles 8a and 8b in 48 and 55% yields, respectively. Reaction of the bis(aldehyde) 6 with 1,3‐ and 1,4‐diaminopropane 9a and 9b in refluxing ethanol under high‐dilution conditions afforded the corresponding macrocyclic Schiff bases 10a and 10b in 41 and 37% yields, respectively. Cyclocondensation of 6 with 1,3‐bis(4‐amino‐5‐phenyl‐3‐ylsulfanylmethyl)propane ( 15 ) in glacial acetic acid under high‐dilution conditions gave the macrocyclic Schiff base 14 in 46% yield. On the other hand, cyclocondensation of bis(aldehydes) 17 and 20 with 3,4‐bis(4‐amino‐5‐phenyl‐3‐ylsulfanylmethyl)thienothiophene 16 in refluxing acetic acid under high‐dilution conditions afforded unexpectedly the novel condensed heteromacrocycles 18 and 21 in 33 and 28%, respectively. The novel bis(amine) 16 was obtained in 50% yield upon treatment of 2 with 4‐amino‐1,2,4‐triazol‐3‐thione 11 in ethanol/water mixture containing potassium hydroxide.     

Studies on highly regio- and stereoselective fluorohydroxylation reaction of 3-aryl-1,2-allenyl phosphine oxides with Selectfluor

The fluorohydroxylation of allenyl phosphine oxides with Selectfluor in commercial MeCN without prior treatment or a mixed solvent of anhydrous MeCN (refluxed over CaH₂ and distilled before use) and 7.0 equiv of H₂O or MeNO₂/H₂O=10/1 afforded 2-fluoro-3-hydroxy-1(E)-alkenyl diphenyl phosphine oxides in moderate yields with very high regio- and stereoselectivities. The E-stereoselectivity is believed to be controlled by the phosphine oxide functionality. In the reaction of 3-(4-methoxyphenyl)-1,2-propadienyl diphenyl phosphine oxide, further fluorination on the electron-rich phenyl ring was also observed.     

A Convenient,Selective Synthesis of Bis[2,4‐bis(trifluoromethyl)phenyl]phosphane Derivatives Starting from 1,3‐Bis(trifluoromethyl)benzene

The reaction of the sterically shielded phosphane derivative, dichlorodiethylaminophosphane, Cl₂PNEt₂, with an excess of a mixture of 2,6‐bis(trifluoromethyl) and 2,4‐bis(trifluoromethyl)phenyl lithium gives bis[2,4‐bis(trifluoromethyl)phenyl]diethylaminophosphane, [2,4‐(CF₃)₂C₆H₃]₂PNEt₂, in 72 % yield as a colourless solid, while 2,6‐bis(trifluoromethyl)phenyl lithium remains unchanged in solution. The amino derivative crystallizes in the monoclinic space group P2₁/c (a 869.2(1), b 1857.4(1), c 1357.6(1) pm, β 100.57(4)°, Z = 4). Treatment of [2,4‐(CF₃)₂C₆H₃]₂PNEt₂ in CHCl₃ solution with conc. HCl allows the synthesis of [2,4‐(CF₃)₂C₆H₃)]₂PCl. [2,4‐(CF₃)₂C₆H₃]₂PCl reacts with H₂O in THF solution with quantitative formation of the corresponding secondary phosphane oxide. To obtain bis[2,4‐bis(trifluoromethyl)phenyl]phosphinic acid, [2,4‐(CF₃)₂C₆H₃]₂P(O)OH, quantitatively, a CHCl₃ solution of [2,4‐(CF₃)₂C₆H₃]₂P(O)H, has to be stirred in an NO₂ atmosphere. The phosphinic acid crystallizes is the triclinic space group (a 754.2(1), b 927.6(2), c 1305.5(2) pm, α 85.11(2)°, β 75.45(1)°, γ 79.99(2)°, Z = 2). From the reaction of the phosphinic acid with either elemental sodium or with cyanide salts, the corresponding phosphinate salts are obtained in an almost quantitatively yield.     

π-Conjugated soluble and fluorescent poly(thiophene-2,5-diyl)s with phenolic,hindered phenolic and p-C6H4OCH3 substituents. Preparation,optical properties,and redox reaction

Dehalogenation polycondensation of 3-(4-methoxyphenyl)-2,5-dibromothiophene with Mg and a zerovalent nickel complex as well as chemical oxidative polymerization of 3-(4-methoxyphenyl)thiophene with FeCl₃ gives poly[3-(4-methoxyphenyl)thiophene-2,5-diyl] P3(4-MeOPh)Th. Treatment of soluble P3(4-MeOPh)Th with BBr₃ converts the OCH₃ group to an OH group and gives poly[3-(4-hydroxyphenyl)thiophene-2,5-diyl] P3(4-OHPh)Th. Oxidative polymerization of 3-[3,5-di-t-butyl-4-{(trimethylsilyl)oxy}phenyl]thiophene with FeCl₃ in an aqueous medium directly affords another kind of polythiophene with a sterically hindered phenolic group, poly[3-(3,5-di-t-butyl-4-hydroxyphenyl)thiophene-2,5-diyl] P3(4-OH-3,5-tBu₂Ph)Th. An organometallic dehalogenation polymerization using a nickel complex also affords P3(4-OH-3,5-tBu₂Ph)Th. All the polymers described above show strong photoluminescence in a region of 500–600 nm. Oxidation of P3(4-OH-3,5-tBu₂Ph)Th with PbO₂ gives stable radical species as confirmed by IR and ESR spectroscopy. Electrochemical redox behavior of the polymers is compared with that of other polythiophenes. © 1997 John Wiley & Sons, Inc.     

Synthesis and Reactivity of 5-Alkoxybenzo[b]furan-2-selenolates

By reaction of selenium(IV) oxide with 5-alkoxy-2-hydroxyacetophenone semicarbazones4-(5-alkoxy-2-hydroxyphenyl)-1'2'3-selenadiazoles were prepared. The latter readily decomposed whentreated with potassium carbonate yielding 5-alkoxybenzo[b]furan-2-selenolates. The selenolates obtainedunderwent alkylation effected by monochloroacetamide, were arylated by 2'4-dinitrochlorobenzene. Theoxidation of selenolates with iodine furnished bis(5-alkoxybenzo[b]furan-2-yl) diselenides.     

Mechanism of autoreduction of bis(4-methoxyphenyl)-oxoammonium perchlorate in aqueous alkali

Autoreduction of bis(4-methoxyphenyl)oxoammonium perchlorate in aqueous alkali follows a mechanism different from that generally accepted for diaryloxoammonium salts. Bis(4-methoxyphenyl)-oxoammonium cation undergoes hydrolysis to the corresponding quinone imine oxide and methanol, the latter gives rise to methoxide ion which reduces the oxoammonium cation to intermediate bis(4-methoxyphenyl)-hydroxylamine. The reaction of bis(4-methoxyphenyl)hydroxylamine with the initial cation yields bis-(4-methoxyphenyl)nitroxyl, and the quinone imine oxide undergoes disproportionation to N-(4-methoxyphenyl)-1,4-benzoquinone imine and oxidation products.     

Synthesis and characterization of new platinum(II) phosphinate complexes

The syntheses of platinum(II) complexes of bis(dimethylphosphinylmethylene)amine and bis(aminomethyl)phosphinic acid were investigated. In the case of bis(dimethyl-phosphinylmethylene)amine the reaction with K₂[PtCl₄] yields the potassium amino-trichloroplatinate K[PtCl₃L] (L?=?bis(dimethylphosphinylmethylene)amine), which was characterized by multinuclear (¹H, ¹³C, ³¹P, and ¹⁹⁵Pt) NMR spectroscopy in solution. Bis(aminomethyl)phosphinic acid reacts with K₂[PtCl₄] under strictly controlled pH conditions to give colorless crystals of the cisplatin analog K[PtCl₂L′] (L′?=?bis(aminomethyl)phosphinate). This complex was characterized by multinuclear NMR spectroscopy in solution as well as by single-crystal X-ray diffraction in the solid state. The bis(aminomethyl)phosphinate coordinates to platinum via both amino functions, thus acting as a chelating ligand.     

Reactions of Bis(chloromethyl)phosphinic(-Phosphinothioic) Chlorides with Silylated Carbamates and Trimethylsilyl N-Trimethylsilylacetimidoate

Bis(chloromethyl)phosphinic chloride reacts with trimethylsilyl methylcarbamate in benzene in the presence of a base to give trimethylsilyl bis(chloromethyl)phosphinate. The same reaction performed without a solvent and in the absence of a base yields trimethylsilyl bis(chloromethyl)phosphinate and bis(chloromethyl)phosphinic anhydride. Reaction of bis(chloromethyl)phosphinic chloride with trimethylsilyl diethylcarbamate yields N,N-diethylbis(chloromethyl)phosphinic amide. The reaction of bis(chloromethyl)phosphinic (-phosphinothioic) chlorides with trimethylsilyl N-trimethylsilylacetimidoate was studied.     

The synthesis of benzofuroquinolines. I. Some benzofuro[2,3-b]quinoline and benzofuro[3,2-c]quinoline derivatives

Benzofuro[2,3-b]quinoline ( Ia ) and its 11-methyl derivative ( Ib ) were synthesized by demethylcyclization of 3-(o-methoxyphenyl)-1,2-dihydroquinolin-2-ones (VIa,b). Benzofuro[2,3-b]quinoline-11-carboxylic acid (Id) was synthesized by chlorination followed by the action of potassium hydroxide of a lactone (IX) prepared by demethyl-cyclization of 3-(o-methoxyphenyl)-2-oxo-1,2-dihydroquinoline-4-carboxylic acid (VIII). Isomeric benzofuro[3,2-c]quinoline (Ha) and its 6-methyl derivative (IIb) were synthesized by demethyl-cyclization of 3-(o-methoxyphenyl)-1,4-dihydroquinolin-4-ones (XIa,b). Both the methyl derivatives (Ib and IIb) were converted to the carboxylic acids (Id and IId) through condensation with benzaldehyde followed by oxidation. The benzofuroquinolines (Ia,b,d and IIa,b) thus obtained were oxidized to the corresponding N-oxides (IIIa,b,d and IVa,b).     

Synthesis and Crystal Structures of Phosphorus-and Selenium-Containing Medium-Sized Heterocycles and Macrocycles

Abstract

New phosphorus- and selenium-containing heterocyclyes, 1,3,2,6-dioxa-phosphaselenacyclooctanes (la-lo), were synthesized in ca. 10% yields from 3-selena-l,5-penta-diol and RP(X)Cl₂ where R = alkoxyl, aroxyl, aryl and X = 0 or lone pair. Three macrocycles 3, 4 and 5, which were expected to be heterodinucleating ligands, were obtained in moderate yields (20–30%) from bis(o-bromomethylpheny1)phenylphosphine oxide 2 and corresponding selenium-containing materials.     

Axially Dissymmetric Diphosphines in the Biphenyl Series: Synthesis of (6,6′-Dimethoxybiphenyl-2,2′-diyl)bis(diphenylphosphine)(‘MeO-BIPHEP’) and Analogues via an ortho-Lithiation/Iodination Ullmann-Reaction Approach

The new axially dissymmetric diphosphines (R)- and (S)-(6,6′-dimethoxybiphenyl-2,2′-diyl)bis(diphenyl phosphine) ((R)- and (S)- 5a ; ‘MeO-BIPHEP’) and the analogues (R)- and (S)- 5b and 5c have been synthesized in enantiomerically pure form. These ligands have become readily available by a synthetic scheme which employs, as key steps, an ortho-lithiation/iodination reaction of the (m-methoxyphenyl)diprienylphosphine oxides 8 and a subsequent Ullmann reaction of the resulting iodides 9 to provide the racemic bis(phosphine oxides) 10 . The bis(phosphine oxides) 10 subsequently are resolved with (?)-(2R,3R)- and (+)-(2S,3S)-O-2,3-dibenzoyltartaric acid and reduced to diphosphines 5 . The Ullmann reaction constitutes a new and efficient route to 2,2′-bis(phosphinoyl)-substituted biphenyl systems. Absolute configurations were established for (R)- 5a by X-ray analysis of the derived Pd complex (R,R)- 17a , and for 5b and 5c by means of ¹H-NMR comparisons of the derived Pd complexes 16 or 17 , respectively, and by means of CD comparisons. The MeO-BIPHEP diphosphine 5a proved to be as efficient as the previously described BIPHEMP diphosphine ((6,6′-dimethylbiphenyl-2,2′-diyl)bis(diphenylphosphine)) in enantioselective isomerizations and hydrogenations.     

meso‐3,5‐Bis(trifluoromethyl)phenyl‐Substituted Expanded Porphyrins: Synthesis,Characterization, and Optical,Electrochemical, and Photophysical Properties

Trifluoroacetic acid‐catalyzed condensation of pyrrole with electron‐deficient and sterically hindered 3,5‐bis(trifluoromethyl)benzaldehyde results in the unexpected production of a series of meso‐3,5‐bis(trifluoromethyl)phenyl‐substituted expanded porphyrins including [22]sapphyrin 2 , N‐fused [22]pentaphyrin 3 , [26]hexaphyrin 4 , and intact [32]heptaphyrin 5 together with the conventional 5,10,15,20‐tetrakis(3,5‐bis(trifluoromethyl)phenyl)porphyrin 1 . These expanded porphyrins are characterized by mass spectrometry, ¹H NMR spectroscopy, UV/Vis/NIR absorption spectroscopy, and fluorescence spectroscopy. The optical and electrochemical measurements reveal a decrease in the HOMO–LUMO gap with increasing size of the conjugated macrocycles, and in accordance with the trend, the deactivation of the excited singlet state to the ground state is enhanced.     

含磷聚醚醚酮酮砜的合成与表征

聚芳醚酮(PAEK)具有优良的热性能、机械性能、电绝缘性能及耐化学药品性,在航空航天、电子电器、核能工业以及民用高技术领域有着广泛的应用[1].聚芳醚酮熔融温度高且难溶于一般有机溶剂,不易加工.为改善聚芳醚酮的溶解性和加工性,可采取在主链中引入大的侧基、柔性基团、扭曲的非平面结构和采用共聚等方法[2～5].