Synthesis and characterization of new platinum(II) phosphinate complexes

The syntheses of platinum(II) complexes of bis(dimethylphosphinylmethylene)amine and bis(aminomethyl)phosphinic acid were investigated. In the case of bis(dimethyl-phosphinylmethylene)amine the reaction with K₂[PtCl₄] yields the potassium amino-trichloroplatinate K[PtCl₃L] (L?=?bis(dimethylphosphinylmethylene)amine), which was characterized by multinuclear (¹H, ¹³C, ³¹P, and ¹⁹⁵Pt) NMR spectroscopy in solution. Bis(aminomethyl)phosphinic acid reacts with K₂[PtCl₄] under strictly controlled pH conditions to give colorless crystals of the cisplatin analog K[PtCl₂L′] (L′?=?bis(aminomethyl)phosphinate). This complex was characterized by multinuclear NMR spectroscopy in solution as well as by single-crystal X-ray diffraction in the solid state. The bis(aminomethyl)phosphinate coordinates to platinum via both amino functions, thus acting as a chelating ligand.     

Phosphorylation of Ethyl Urethane,Urea, and Acetamide with Bis(chloromethyl)phosphinic Chloride in the Presence of Potassium Carbonate

Bis(chloromethyl)phosphinic chloride reacts with urethane to give phosphorylated urethane, whereas with urea and acetamide the final reaction product is bis(chloromethyl)phosphinic anhydride.     

Interaction of 2-methyl-2,5-dioxo-1,2-oxaphospholane with trimethylsilyl cyanide

The reaction of 2-methyl-2,5-dioxo-1,2-oxaphospholane (1) with trimethylsilyl cyanide was found to give, depending on conditions, three organophosphorus compounds: trimethylsilyl methyl(2-cyanocarbonylethyl)phosphinate (2), trimethylsilyl methyl(3-trimethylsiloxy-3,3-dicyanopropyl)phosphinate (3) and trimethylsilyl methyl(3-trimethyl-siloxy-3-cyano-2-propenyl)phosphinate (4), On hydrolysis of3 under mild conditions, methyl(3-hydroxy-3,3 dicarboxypropyl)phosphinic acid (7) was obtained. The latter is readily decarboxylated on heating to give methyl(3-hydroxy-3-carboxy-propyl)phosphinic acid (8). The interaction of2 and4 with water or alcohols gives, correspondingly, methyl[2-carboxy(alkoxycarbonyl) ethyl]phosphinic acids (11–13). Methyl(2-oxamoyiethyl)phosphinic acid (14) was prepared by successive treatment of propenylphosphinate4 with HCl gas and water.Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 170–177, January, 1993.     

Inorganic coordination polymers. XII. Chromium(III) tris(phosphinates)

Cohesive films of a series of chromium(III) tris(phosphinates)[Cr(OPRR′O)(OPR″-R?O)(OPR^*R^**O)]_y in which the side groups on the phosphorus are alkyl, phenyl, and/or hydrogen groups have been prepared by reaction casting or by hot pressing. The preparative reaction appears to involve conversion of an aquahydroxo or hydroxo chromium(III) bis(phosphinate) to an intermediate hydroxo bis(phosphinate) containing coordinated phosphinic acid followed by an intrachain reaction leading to the tris(phosphinate). Tensile strengths of the chromium(III) tris(phosphinates) range from 100 to 5600 psi, elongations from less than 1 to 100%. Thermogravimetric data indicate that major decomposition occurs at temperatures from 200 to 435°C in air and from 410 to 510°C in nitrogen. Infrared spectra and physical properties are interpreted to support a structure for the chromium(III) tris(phosphinates) which is based on linear, triple-bridged chains. The presence of octyl or other long alkyl side groups on the phosphorus improves the physical properties, presumably by internal plasticization, but leads to decreased thermal stability.     

Micelle-Forming Properties and Catalytic Effect of the System Sodium Dodecyl Sulfate-Ethylene Glycol in Solvolysis of p-Nitrophenyl Bis(chloromethyl)phosphinate

Solvolysis of p-nitrophenyl bis(chloromethyl)phosphinate is accelerated in the micellar system sodim dodecyl sulfate-ethylene glycol, since the reaction in the micellar pseudophase has increased activation entropy. Among metal salt catalysts, the highest activity is characteristic of La^{3 +} salts.     

Reactions of Unsaturated Ketones with Bis(trimethylsilyl) Hypophosphite

Bis(trimethylsilyl) hypophosphite reacts with unsaturated ketones (methyl vinyl ketone and mesityl oxide) to give, depending on the reaction conditions, 1: 1 or 1: 2 adducts after hydrolysis. It was found that the intramolecular cyclization of the 1: 2 reaction product with mesityl oxide, trimethylsilyl bis(2-methyl-4- oxopentan-2-yl)phosphinate, yields, after hydrolysis, a phosphorinane with exocyclic carbonyl and hydroxyl groups.     

Studies on imidazole derivatives and related compounds. 3. Regioselective glycosylation of 4-carbamoylimidazolium-5-olate

In the synthesis of glycosyl derivatives of 4-carbamoylimidazolium-5-olate ( 2 ) by the silyl-Hilbert-Johnson method using trimethylsilyl trifluoromethanesulfonate as catalyst, we obtained N-3 nucleosides 5 as major products and N-1,N-bis-nucleosides 6 as minor ones. The desired N-1 nucleosides 4 were isolated in only low yields. However, the yields of 4 were improved by adding ca. One equivalent of stannic chloride to the silylated 4-carbamoylimidazolium-5-olate ( 3 ). On the basis of nuclear magnetic resonance (¹³C and ²⁹Si) and ultraviolet spectroscopic studies, we verify the formation of σ-complexes between the silylated base 3 and the Lewis acid (stannic chloride or trimethylsilyl trifluoromethanesulfonate), and the propose the structures of these complexes and the reaction mechanism.     

(N-methyl-N-alkoxymethylaminomethyl)dialkoxysilanes and bis[N-methyl-N-(dialkoxysilylmethyl)amino]methanes

(N-methyl-N-alkoxymethylaminomethyl)-dialkoxysilanes and bis[N-methyl-N-(dialkoxymethyl)amino]methanes were first obtained by the interaction of (N-methylaminomethyl) dialkoxy-R-silanes with chloromethyl alkyl ethers in yields of 40–67% and 10–25 %, respectively.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 382–383, February, 1995.     

Syntheses,Crystal Structure and Reactivity of Tin(II) Bis[N‐(diphenylphosphanyl)(2‐pyridylmethyl)amide]

Metallation of N‐(diphenylphosphanyl)(2‐pyridylmethyl)amine with n‐butyllithium in toluene yields lithium N‐(diphenylphosphanyl)(2‐pyridylmethyl)amide ( 1 ), which crystallizes as a tetramer. Transamination of N‐(diphenylphosphanyl)(2‐pyridylmethyl)amine with an equimolar amount of Sn[N(SiMe₃)₂]₂ leads to the formation of monomeric bis(trimethylsilyl)amido tin(II) N‐(diphenylphosphanyl)(2‐pyridylmethyl)amide ( 2 ). The addition of another equivalent of N‐(diphenylphosphanyl)(2‐pyridylmethyl)amine gives homoleptic tin(II) bis[N‐(diphenylphosphanyl)(2‐pyridylmethyl)amide] ( 3 ). In these complexes the N‐(diphenylphosphanyl)(2‐pyridylmethyl)amido groups act as bidentate bases through the nitrogen bases. At elevated temperatures HN(SiMe₃)₂ is liberated from bis(trimethylsilyl)amido tin(II) N‐(diphenylphosphanyl)(2‐pyridylmethyl)amide ( 2 ) yielding mononuclear tin(II) 1,2‐dipyridyl‐1,2‐bis(diphenylphosphanylamido)ethane ( 4 ) through a C–C coupling reaction. The three‐coordinate tin(II) atoms of 2 and 4 adopt trigonal pyramidal coordination spheres.     

The reaction of 4-(p-nitrobenzyl)pyridine with some electrophiles

The nucleophile 4-(p-nitrobenzyl)pyridine was allowed to react with four carcinogenic alkylating agents, chloromethyl methyl ether, bis(chloromethyl) ether, glycol sulfate and propane sultone, one carcinogenic acylating agent, N,N-dimethylcarbamyl chloride, and one noncarcinogenic electrophile, perchlorocyclobutenone. The structures of the major products formed, which are substituted pyridinium salts or 1,4-dihydropyridines, were determined.     

Synthesis of some derivatives of bis (N,N-dialkylaminomethyl)phosphinic acids

Conclusions A number of derivatives of bis(N,N-dialkylaminomethyl)phosphinic acids have been obtained by the reaction of dialkylamines with esters and amides of bis(chloromethyl) phosphinic acid.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1346–1348, June, 1967.     

Bis(trimethylsilyl)amide und -methanide des Yttriums — Molekülstrukturen von Tris(diethylether-O)lithium-(μ-chloro)-tris[bis(trimethylsilyl) methyl]yttriat,solvensfreiem Yttrium-tris[bis(trimethylsilyl)amid] sowie dem Bis(benzonitril)-Komplex

Bis(trimethylsilyl)amides and -methanides of Yttrium — Molecular Structures of Tris(diethylether-O)lithium-(μ-chloro)-tris[bis(trimethylsilyl)methyl]yttriate, solvent-free Yttrium Tris[bis(trimethylsilyl)amide] as well as the Bis(benzonitrile) Complex The reaction of yttrium(III) chloride with the three-fold molar amount of LiE(SiMe₃)₂ (E = N, CH) yields the corresponding yttrium derivatives. Yttrium tris-[bis(trimethylsilyl)amide] crystallizes in the space group P3 1c with a = 1 636,3(2), c = 849,3(2) pm, Z = 2. The yttrium atom is surrounded trigonal pyramidal by three nitrogen atoms with Y? N-bond lengths of 222 pm. Benzene molecules are incorporated parallel to the c-axes. The compound with E = CH crystallizes as a (Et₂O)₃LiCl-adduct in the monoclinic space group P2₁/n with a = 1 111,8(2), b = 1 865,2(6), c = 2 598,3(9) pm, β = 97,41(3)° and Z = 4. The reaction of yttrium tris[bis(trimethylsilyl)amide] with benzonitrile yields the bis(benzonitrile) complex, which crystallizes in the triclinic space group P1 with a = 1 173,7(2), b = 1 210,3(2), c = 1 912,4(3) pm, α = 94,37(1), β = 103,39(1), γ = 117,24(1)° and Z = 2. The amido ligands are in equatorial, the benzonitrile molecules in axial positions.     

Reaction of <Emphasis Type="Italic">N,N</Emphasis>′-bis(trimethylsilyl)dicyandiamide with bis(η<Superscript>5</Superscript>-cyclopentadienylvanadium) dichloride

1,3,5-Tris[bis(η⁵-cyclopentadienyl)chlorovanadium]melamin is prepared in high yield by the reaction of N,N′-bis(trimethylsilyl)dicyandiamide with bis(η⁵-cyclopentadienylvanadium) dichloride in tetrahydrofuran. As side products, trimethylchlorosilane and cyclopentadiene formed. Reaction of N,N′-bis(trimethylsilyl) dicyandiamide with benzoyl chloride results in the formation of tris(benzoyl)melamin.     

New routes to 1-deoxy-(3,4-dihydro-7,8-dimethyl-2,4-dioxopyrimido[4,5-b]-quinolin-10(2H)yl)-D-ribitols (5-deazariboflavins)

The acid-catalyzed reaction of 6-(N-D-ribityl-3,4-xylidino)uracil ( 1 ) with trimethyl ortho-formate yields a bis(methoxymethylene) derivative ( 2 ), which is readily deprotected to give 5-deazariboflavin ( 3 ). Correspondingly, 5-methyl-5-deazariboflavin ( 6 ) is produced by cyclization of the tetraacetate of 1 with acetyl chloride in the presence of stannic chloride followed by deacetylation.     

Synthese von substituierten Calcium-bis(disilylamiden) mittels der Transmetallierung von Zinn(II)- und Zinn(IV)-amiden

Synthesis of Substituted Calcium-bis(disilylamides) by Transmetalation of Tin(II) and Tin(IV) Amides Stannylenes as well as stannanes with substituted disilylamino groups are valuable synthons for the synthesis of alkaline earth metal bis(disilylamides) via the transmetallation reaction. Whereas bis[2,2,5,5-tetramethyl-2,5-disilaaza-cyclo-pentyl]stannylene 1 is a suitable reagent for this type of reaction, bis[trimethylsilyl-tris(trimethylsilyl)silylamino]stannylene 2 (monoclinic, P2₁/c, a = 1492.6(2), b = 1705.2(2), c = 1865.3(3) pm, β = 109.03(2)º, Z = 4) is not only attacked at the Sn? N-bond but also the N? Si-bond is cleaved by calcium metal. Similar light sensitivity as for 2 is observed for the mercury bis[trimethylsilyl-tris(trimethylsilyl)silylamide] 3 , the homolytic M? N-bond cleavage leads to the formation of the trimethylsilyl-tris(trimethylsilyl)silylamino radical (g = 2.00485; a(N) = 16.2 G). The calcium tin exchange reaction of 1 in THF yields tris(tetrahydrofuran-O)calcium-bis[2,2,5,5-tetramethyl-2,5-disilaaza-cyclo-pentanide] 4 (monoclinic, P2₁/n, a = 1060.9(2), b = 1919.3(5), c = 1686.0(3) pm, β = 90.30(2)º, Z = 4). The stannanes Me_n-4Sn[N(SiMe₃)₂]_n with n = 1 or 2 are also valuable materials for the synthesis of bis(tetrahydrofuran-O)calcium-bis[bis(trimethylsilyl)amide].     

Heteroleptische Diorganylzink-Verbindungen mit einem Bis(trimethylsilyl)phosphanido-Substituenten

Heteroleptic Diorganylzinc Compounds with a Bis(trimethylsilyl)phosphido Substituent Dialkylzinc ZnR₂ (Me, Et, iso-Pr, nBu, tBu, CH₂SiMe₃) reacts with one equivalent of bis(trimethylsilyl)-phosphine in carbohydrates to the heteroleptic compounds RZnP(SiMe₃)₂; dependent from the steric demand of the alkyl group R the derivatives are dimeric or trimeric in solution as well as in the solid state. Monomeric bis(trimethylsilyl)phosphido-tris(trimethylsilyl)methylzinc yields from the reaction of lithium tris(trimethylsilyl)methanide and lithium bis(trimethylsilyl)phosphide with zinc(II) chloride. Bis(trimethylsilyl)phosphido-methylzinc crystallizes in the orthorhombic space group P2₁2₁2₁ with {a = 1 007.6(1); b = 1 872.3(3); c = 2 231.0(4) pm; Z = 4} as a trimeric molecule with a central cyclic Zn₃P₃ moiety in the twist-boat conformation. Bis(trimethylsilyl)phosphido-n-butylzinc, that crystallizes in the orthorombic space group Pben with {a = 1 261.7(2); b = 2 253.0(4); c = 1 798.9(2) pm; Z = 4}, shows a simular central Zn₃P₃ fragment. The sterically more demanding trimethylsilylmethyl substituent leads to the formation of a dimeric molecule of bis(trimethylsilyl)phosphido-trimethylsilylmethylzinc {monoklin, P2₁/c; a = 907.2(4); b = 2 079.8(8), c = 1 070,2(3) pm; β = 103,48(1)°; Z = 2}. Bis(trimethylsilyl)phosphido-iso-propylzinc shows in solution a temperature-dependent equilibrium of the dimeric and trimeric species; the crystalline state contains a 1:1 mixture of these two oligomers {orthorhombisch; Pbca; a = 1 859.0(3); b = 2 470.9(2); c = 3 450.7(3) pm; Z = 8}. The Zn? P bond lengths vary in a narrow range around 239 pm, the Zn? C distances were found between 196 and 203 pm.     

Synthesis of hydrogen-terminated aliphatic bis(ethynyl ketone)s and aliphatic poly(enamine-ketone)s and poly(enonesulfide)s

Hydrogen-terminated aliphatic bis(ethynyl ketone)s (H-ABEKs): 1,9-decadiyne-3,8-dione ( 3a ) and 1,13-tetradecadiyne-3,12-dione ( 3b ) were prepared by the Friedel-Crafts reaction of bis(trimethylsilyl) acetylene (BTMSA) with adipoyl chloride and sebacoyl chloride, followed by desilylation with an aqueous buffer solution. Aliphatic poly(enamine-ketone)s (APEKs) and aliphatic poly(enonesulfide)s (APESs) were prepared in nearly quantitative yield by the nucleophilic addition polymerization of 3a,b with various diamines and dithiols in N,N-dimethylformamide (DMF) and m-cresol at room temperature during 14-22 h. Aromatic diamines and dithiols gave polymers that were soluble only in m-cresol. Primary diamines gave exclusively APEKs with the cis (Z) configuration. Dithiols gave APESs which contained more cis (Z) than trans (E) configurations. The inherent viscosities (η_inh) of the APEKs ranged from 0.05 to 0.73 dL/g. The APESs gave η_inh ranging from 0.36 to 2.21 dL/g.     

Reaction of bis(trimethylsiloxy)phosphine with trimethylsilane

Bis(trimethylsilyl) [3-(trimethylsilyl)propyl]phosphonate and trimethylsilyl [3-(trimethylsilyl)propyl]-phosphinate are obtained by the reaction of bis(trimethylsiloxy)phosphine with trimethylallylsilane and converted into [3-(trimethylsilyl)propyl]phosphinic and [3-(trimethylsilyl)propyl]phosphonic acid, respectively, by the reaction with methanol.     

Inorganic coordination polymers. XI. A new family of chromium(III) bis(phosphinate) polymers, [Cr(OH)(OPRR′O)2]x

Heating hydroxyaquochromium(III) bis(phosphinates) at temperatures up to 200°C under vacuum yields the corresponding anhydrous polymers [Cr(OH)(OPRR'O)₂]_x. The infrared and visible spectra and solution properties lead to the following conclusions. When R and R′ are phenyl groups, the hydroxyl groups appear to bridge between adjacent chromium atoms in the chain together with the phosphinate ligands to yield a linear, triple-bridged polymer. When at least one substituent on the phosphorus is an alkyl group, some of the hydroxyl groups crosslink between chains to yield less soluble polymers. Comparison of the properties of these new polymers with the parent polymers suggests that the latter should be formulated [Cr(H₂O)_n(OH)(OPRR′O)₂]_x·pH₂O and that they contain more than one kind of monomer unit. The parent polymers can be readily prepared by a new method which involves reaction of a soluble chromium(III) salt with alkali metal phosphinates or of chromium(III) hydroxide with phosphinic acids in a water–tetrahydrofuran mixture.     

Synthesis of poly(cyanurate)s by a novel polyaddition of bis(epoxide)s with triazine dichloride

Poly(cyanurate)s (P‐1–P‐4) containing triazine groups in the main chain and pendant chloromethyl groups in the side chain were synthesized by the polyaddition of bis(epoxide)s with 2,4‐dichloro‐6‐(diphenylamino)‐s‐triazine (DPAT) using quaternary onium salts as catalysts. The polyaddition of diglycidyl ether of bisphenol‐A (DGEBA) with DPAT proceeded smoothly in chlorobenzene at 100 °C for 12 h to give P‐1 with M_n = 19,000 in a 92% yield, when tetrabutylammonium chloride (TBAC) was used as a catalyst. However, no reaction occurred without a catalyst or with triethylamine alone under the same reaction conditions. Polyadditions of other bis(epoxide)s with DPTA also proceeded smoothly using 5 mol % of TBAC as a catalyst in chlorobenzene to produce corresponding polymers (P‐2≈P‐4) in high yields under similar reaction conditions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4006–4012, 2000