全硅FER沸石上有机吸附物脱附行为的研究

运用热分析技术,研究吸附在体相和表面结构完美的单晶状疏水全硅FER沸石孔道中的有机化合物的脱附行为,测定亲和性指数AT值和负载量。所研究的吸附质为直链烷烃、直链烷基醇、直链烷基胺等,结果显示醇有较低的AT值,而直链烷烃有较高的AT值,胺类有最高的AT值。证明全硅FER沸石骨架对烷基、胺基呈现出强的"亲和性",而对羟基呈现出“憎性”。同时还发现吸附质的链长对脱附性质、AT值也有较大影响。     

完美骨架全硅β沸石性质研究

运用热分析技术研究胺类、烷烃类、芳香烃类、醇类在具完美骨架的合成得到 的全硅β沸石中的脱附行为，测定亲和性指娄A_T值和负载量。发现烷烃类、胺类 、芳香族化合物都对全硅β沸石骨架表现出亲和性，而醇类由于羟基的存在表现出 对骨架的憎性，结合吸附热等数据讨论了各类吸附质与骨架相互作用（主／客体相 互作用）的性质。     

完美骨架全硅β沸石性质研究

运用热分析技术研究胺类、烷烃类、芳香烃类、醇类在具完美骨架的合成得到 的全硅β沸石中的脱附行为，测定亲和性指娄A_T值和负载量。发现烷烃类、胺类 、芳香族化合物都对全硅β沸石骨架表现出亲和性，而醇类由于羟基的存在表现出 对骨架的憎性，结合吸附热等数据讨论了各类吸附质与骨架相互作用（主／客体相 互作用）的性质。     

用TG/DTG/DTA研究硅沸石与有机分子的主体/客体相互作用

用TG/DTG/DTA法研究无阳离子与Si—OH缺陷、结构完美的硅沸石上烃类、烷基醇、烷基胺的热脱附行为.有机分子从硅沸石上脱附的温度低于300℃其亲和性值A_T=T_d-T_b,式中T_d为有机分子在DTG上的失重峰温,T_b为该有机物在标准压力下的沸点.饱和烷烃的A_T值为60～90,而苯、甲苯、对二甲苯等的A_T值为6～13.电负性较强的羟基使烷基醇与硅沸石的亲和性明显下降.多羟基醇的A_T值为负值.对二甲苯、烷基醇、烷基胺在脱附时有明显吸热效应.A_T值及脱附热效应的不同是硅沸石骨架0~(2-)微孔表面与有机分子C—H基因,其它极性基因之间相互作用不同,以及受到硅沸石骨架空间限制的被吸附分子间缔合情况不同所致,反应了不同类型的主体/客体超分子相互作用.     

圆柱形纳米孔道内受限溶液I2/Ar的分子动力学模拟研究

利用分子动力学模拟方法, 考察了受限于圆柱形纳米孔道内I2/Ar溶液的振动传能及扩散动力学. 计算得到了溶质振动弛豫时间T1、溶剂轴向扩散系数Dz随孔道半径变化的规律. 结果表明: T1随着孔道半径的增大而减小; 而Dz随着孔道半径的增大而增大; 与预期的一致, 随着孔道半径的增大, 孔道的限制作用逐渐减小, T1与Dz趋近于相应的非受限溶液体相值. 此外, 通过考察溶质、溶剂与孔道的相互作用, 在原子、分子层次上揭示了限制作用对传能与传质影响的机制.     

水分子在HZSM-5沸石原子簇上吸附的密度泛函研究

运用基于广义梯度密度泛函理论的BLYP方法研究了水分子在HZSM-5沸石原子簇不同孔道中的吸附前后的结构.结果表明水分子与HZSM-5沸石原子簇相互作用时,电子由水分子向沸石骨架转移.一个水分子吸附于HZSM-5的直孔道、扭曲孔道和交叉孔道Br(o)nsted酸位上时,均形成较稳定的中性络合物的结构,但是在不同沸石孑L道的吸附热不一样,大小顺序分别为交叉孔道＞直孔道＞扭曲孔道.当有两个水分子被吸附时,不同沸石孔道Br(o)nsted酸位上中性络合物的结构与离子性络合物的结构均有存在.     

硅沸石完美骨架上的吸附Ⅲ.氯氟烃在MFI和FAU上的吸附热

测定不同温度下三种氯氟烃F-11(CFCl3),F-12(CF2Cl2)和F-22(CHF2Cl)在疏水高硅MFI和FAU沸石上的吸附等温线,以研究其吸附热效应。根据Clapeyron-Clausius方程,由吸附等温线,计算不同覆盖度C的等量吸附热Qst(C)和平均吸附热Qst^*(△Ha)。上述吸附质在两种沸石上吸附热的大小顺序均为：△Ha(MFI)＞△Ha(FAU)。在同种沸石上,吸附热的大小顺序为：△Ha(F-11)＞△Ha(F-12)＞△Ha(F-22).298K时的吸附等温线和△Ha的变化趋势显示,对能允许氯氟烃分子自由进出其孔道的FAU沸石,吸附质分子越大,低分压吸附量(V)越大,吸附热(△Ha)也越大。而孔道对吸附质分子有空间限制作用的MFI沸石,其吸附热、分子尺寸与饱和吸附量(Vm)间关系比较复杂。选择去除氯氟烃的沸石吸附剂应综合考虑△Ha与饱和吸附容量Vm。     

硅沸石完美骨架上的吸附Ⅲ.氯氟烃在MFI和FAU上的吸附热

测定不同温度下三种氯氟烃F-11(CFCl3),F-12(CF2Cl2)和F-22(CHF2Cl)在疏水高硅MFI和FAU沸石上的吸附等温线,以研究其吸附热效应。根据Clapeyron-Clausius方程,由吸附等温线,计算不同覆盖度C的等量吸附热Qst(C)和平均吸附热Qst^*(△Ha)。上述吸附质在两种沸石上吸附热的大小顺序均为：△Ha(MFI)＞△Ha(FAU)。在同种沸石上,吸附热的大小顺序为：△Ha(F-11)＞△Ha(F-12)＞△Ha(F-22).298K时的吸附等温线和△Ha的变化趋势显示,对能允许氯氟烃分子自由进出其孔道的FAU沸石,吸附质分子越大,低分压吸附量(V)越大,吸附热(△Ha)也越大。而孔道对吸附质分子有空间限制作用的MFI沸石,其吸附热、分子尺寸与饱和吸附量(Vm)间关系比较复杂。选择去除氯氟烃的沸石吸附剂应综合考虑△Ha与饱和吸附容量Vm。     

硅改性ZSM－5沸石分子筛的酸性、孔径和择形催化性能的研究

在不同条件下用各种硅改性剂对ＺＳＭ－５沸石分子筛进行改性，并将其用于催化乙苯歧化生成对二乙苯的反应。实验结果表明，在合适条件下用ＳｉＣｌ＿４对ＺＳＭ－５改性后，可以获得高性能形选催化剂。硅改性可以有效地消除催化剂外表面酸中心，并能对分子筛孔道进行微调。根据反应结果和反应物在催化剂中的扩散系数判断，当改性后催化剂的孔道半径与ＮａＺＳＭ－Ｓ沸石孔道半径相近时，其催化选择性最佳。     

硅改性ZSM—5沸石分子筛的酸性,孔径和择形催化性能的研究

在不同条件下用各种硅改性剂对ＺＳＭ－５沸石分子筛进行改性，并将其用于催化乙苯歧化生成对二乙苯的反应。实验结果表明，在合适条件下用ＳｉＣｌ４对ＺＳＭ－５改性后，可以获得高性能形选催化剂。硅改性可以有效地消除催化剂外表面酸中心，并能对分子筛孔道进行微调。根据反应结果和反应物在催化剂中的扩散系数判断，当改性后催化剂的孔道半径与ＮａＺＳＭ－５沸石孔道半径相近时，其催化选择性最佳。     

硅沸石完美骨架上的吸附Ⅱ.乙胺、正戊烷、乙醇在 FAU型沸石上的吸附热

用测定吸附等温线法研究乙胺、正戊烷和乙醇在疏水高硅FAU沸石上的吸附热效应。根据Clapeyron-Clausius方程,处理吸附等温线,得到不同覆盖度C(C=被吸附分子数/晶胞)的等量吸附热Qst(C)(一定覆盖度C时由Clapeyron-Clausius方程计算的吸附热)及平均等量吸附热Qst^*(一定温度区间里等量吸附热Qst的平均值),以及Qst^*与沸点蒸发热△Hv的差值△H1(定义为相互作用强度△H1=Qst^*-△Hv)。所研究的三种有机分子的△H1的次序为△H1(乙胺)>△H1(正戊烷)>>△H1(乙醇)。这与AT值(定义为脱附温度Td与吸附质的沸点温度Tb的差值,无需单位)有正相关关系。由AT值观察到的高硅FAU沸石Si-O骨架与被吸附乙胺之间可能存在的强相互作用、为本研究测定的热力学定量数据△H1值所证明。     

Effects of adsorbate molecules on the quadrupolar interaction of framework aluminum atoms in dehydrated zeolite H,Na-Y

The effect of adsorbate molecules on the quadrupolar interaction of framework aluminum atoms with the electric field gradient in dehydrated zeolite H,Na-Y has been studied by (27)Al MAS NMR and (27)Al MQMAS NMR spectroscopy at magnetic fields of 9.4 and 17.6 T. Upon adsorption of molecules interacting with bridging OH groups by hydrogen bonds (acetonitrile and acetone), the quadrupole coupling constant of framework aluminum atoms was found to decrease from 16.0 MHz (unloaded zeolite) to 9.4 MHz. Adsorption of molecules, which cause a proton transfer from the zeolite framework to the adsorbates (ammonia and pyridine), reduces the quadrupole coupling constant to 3.8 MHz for coverages of 0.5-2 molecules per bridging OH group. The experiments indicate that the quadrupole coupling constant of framework aluminum atoms in dehydrated zeolite H,Na-Y reflects the chemical state of adsorbate complexes formed at bridging OH groups. In agreement with earlier investigations it was found that a proton affinity of the adsorbate molecules of PA = 812-854 kJ/mol is necessary to induce a proton transfer from the zeolite framework to the adsorbed compounds. This proton transfer is accompanied by a strong improvement of the tetrahedral symmetry of zeolitic framework AlO(4) tetrahedra and a decrease of the electric field gradient.     

The leading role of association in framework modification of highly siliceous zeolites with adsorbed methylamine.

Affinity index (AT value), adsorption heat, X-ray diffraction (XRD), and 13C and 29Si magic-angle spinning (MAS) NMR, FTIR, and Raman spectroscopies were used to study the interaction of highly siliceous MFI-, FAU-, and FER-type zeolites with adsorbed methylamine (MA). Compared with the data for methanol, the much higher AT values and adsorption heats, and significant changes in XRD patterns, 29Si MAS NMR spectra, and FTIR spectra for the zeolites after adsorption of MA, revealed a strong hydrogen-bonding interaction between the perfect framework of the zeolites and the adsorbed MAs. This interaction results from the fact that the H atom of the amine group attacks the [Si-O] framework to form a Si-OHN bond, which leads to the appearance of Si-N bonds in the zeolites at 323 K. Therefore, the zeolite framework can be modified with MA under mild conditions. The highly siliceous MFI zeolite and the H-ZSM-5 zeolite with SiO2/Al2O3=31:1 were modified with MA and investigated by temperature-programmed desorption of CO2. The modified zeolites exhibited greatly enhanced basic properties in comparison with those of the raw materials. The influence of defects in the zeolite on the adsorption and the interaction with MA is discussed.     

Calculating henry adsorption constants of molecular hydrogen at 77 K on alumophosphate zeolites with different microchannel sizes

Adsorption isotherms of molecular hydrogen are measured at 77 K in a series of AlPO alumophosphate zeolites with different microchannel sizes. The potential of the intermolecular interaction of H₂ is calculated within the model of a cylindrical channel of variable size. Henry constants are calculated for this model for arbitrary orientations of the adsorbate molecules in microchannels. The experimental and calculated values of the Henry adsorption constant of H₂ are compared at 77 K on AlPO zeolites. The constants of intermolecular interaction are determined for the H₂-AlPO system.     

垮越临界温度的分子筛吸附: 微孔体积填充理论的适用性

用高真空重量法测定了NaX分子筛对不同吸附质NH3, H2O, C2H5OH等的吸附等温线, 用微孔体积填充理论对吸附等温线进行非线性拟合, 得到满意结果。表明该理论不但可扩展到以静电场为主的吸附体系, 还可适用于吸附温度高于吸附质临界温度的吸附体系。计算结果表明, NaX吸附不同吸附质测得的极限空腔体积基本相同, 且与结构分析得到的空腔体积一致, 进一步表明微孔体积填充理论对该体系的适用性。计算了各种吸附质的极限吸附量, 以及某填充度下的蚊分吸附热随着温度的变化趋势。可为固体吸附式制冷系统的设计与制造提供理论依据及有关掺数。     

Adsorption of cyclic amines on graphitized thermal carbon black

Thermodynamic characteristics of adsorption (TCA) for aniline and its methyl derivatives on the surface of graphitized thermal carbon black (GTC, Carbopack C HT trade mark) were determined using equilibrium gas adsorption chromatography in the range of the lowest adsorbate concentrations in the gas phase. A series of relationships relating the TCA of the studied amines to their physicochemical parameters was obtained. The theoretical values of entropy of adsorption were calculated in the framework of the model of two-dimensional ideal gas and compared with the corresponding experimental values, which allowed one to reveal specific features of the molecular structure of the adsorbates. A similarity between the thermal component of entropy of the studied compounds in the adsorbed state and that of the entropy of the pure liquid adsorbates made it possible to refine the physical state and mobility of the adsorbate molecules in the force field of the adsorbent. The regression equation relating the heats of adsorption on the GTC to such molecular constants of adsorbates as polarizability, molecular surface area, and molecular weight were proposed for the first time. A high predictive power of the equations derived in the work for the preliminary estimation of the adsorption characteristics of alkylanilines and alkylbenzenes on the GTC was shown.     

乙炔、丙烯在多种分子筛上的吸附和脱附性质

在80℃下研究了ZSM5、13X、Y、MOR、5A、SAPO34等多种分子筛和常见载体上乙炔和丙烯的吸附和脱附性能。结果表明，乙炔和丙烯在SiO2、γ-Al2O3上不吸附，而与分子筛存在较强的相互作用。对于同类型的分子筛，两者的饱和吸附量均随分子筛硅铝比的增大而减小。在同一种分子筛上，以摩尔计的丙烯吸附量均明显高于乙炔。在80℃改性β分子筛上乙炔和丙烯饱和吸附量可分别达到0.11mmol/g和4.89mmol/g，该结果明显高于文献报道的结果。     

Predicting second gas-solid virial coefficients using calculated molecular properties on various carbon surfaces

Gas-solid chromatography was used to obtain values of the second gas-solid virial coefficient, B2s, in the temperature range from 343 to 493 K for seven adsorbate gases: methane, ethane, propane, chloromethane, chlorodifluoromethane, dimethyl ether, and sulfur hexafluoride. Carboxen-1000, a 1200 m2/g carbon molecular sieve (Supelco Inc.), was used as the adsorbent. These data were combined with earlier work to make a combined data set of 36 different adsorbate gases variously interacting with from one to four different carbon surfaces. All B2s values were extrapolated to 403 K to create a set of 65 different gas-solid B2s values at a fixed temperature. The B2s value for a given gas-solid system can be converted to a chromatographic retention time at any desired flow rate and can be converted to the amount of gas adsorbed at any pressure in the low-coverage, Henry's law region. Beginning with a theoretical equation for the second gas-solid virial coefficient, various quantitative structure retention relations (QSRR) were developed and used to correlate the B2s values for different gas adsorbates with different carbon surfaces. Two calculated adsorbate molecular parameters (molar refractivity and connectivity index), when combined with two adsorbent parameters (surface area and a surface energy contribution to the gas-solid interaction), provided an effective correlation (r2 = 0.952) of the 65 different B2s values. The two surface parameters provided a simple yet useful representation of the structure and energy of the carbon surfaces and thus our correlations considered variation in both the adsorbate gas and the adsorbent solid.